diff mbox series

[2/2] clk: qcom: gcc-sm8650: Keep UFS PHY GDSCs ALWAYS_ON

Message ID 20241107-ufs-clk-fix-v1-2-6032ff22a052@linaro.org (mailing list archive)
State New
Headers show
Series clk: qcom: gcc-{sm8550/sm8650}: Fix UFS resume from suspend issue | expand

Commit Message

Manivannan Sadhasivam via B4 Relay Nov. 7, 2024, 11:58 a.m. UTC 
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

In SM8650, UFS PHY GDSCs doesn't support hardware retention. So using
RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs will get
powered down during suspend, causing the UFS PHY to loose its state. And
this will lead to UFS error similar to below during resume:

ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5

Cc: stable@vger.kernel.org # 6.8
Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/clk/qcom/gcc-sm8650.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Neil Armstrong Nov. 7, 2024, 12:27 p.m. UTC | #1 
On 07/11/2024 12:58, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> In SM8650, UFS PHY GDSCs doesn't support hardware retention. So using
> RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs will get
> powered down during suspend, causing the UFS PHY to loose its state. And
> this will lead to UFS error similar to below during resume:
> 
> ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
> ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
> ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
> ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
> ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5
> 
> Cc: stable@vger.kernel.org # 6.8
> Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
> Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>   drivers/clk/qcom/gcc-sm8650.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sm8650.c b/drivers/clk/qcom/gcc-sm8650.c
> index fd9d6544bdd5..ddc38caf7160 100644
> --- a/drivers/clk/qcom/gcc-sm8650.c
> +++ b/drivers/clk/qcom/gcc-sm8650.c
> @@ -3480,7 +3480,7 @@ static struct gdsc ufs_phy_gdsc = {
>   		.name = "ufs_phy_gdsc",
>   	},
>   	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
>   };
>   
>   static struct gdsc ufs_mem_phy_gdsc = {
> @@ -3489,7 +3489,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
>   		.name = "ufs_mem_phy_gdsc",
>   	},
>   	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
>   };
>   
>   static struct gdsc usb30_prim_gdsc = {
> 

Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK

Thanks!
Neil
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-sm8650.c b/drivers/clk/qcom/gcc-sm8650.c
index fd9d6544bdd5..ddc38caf7160 100644
--- a/drivers/clk/qcom/gcc-sm8650.c
+++ b/drivers/clk/qcom/gcc-sm8650.c
@@ -3480,7 +3480,7 @@  static struct gdsc ufs_phy_gdsc = {
 		.name = "ufs_phy_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
 };
 
 static struct gdsc ufs_mem_phy_gdsc = {
@@ -3489,7 +3489,7 @@  static struct gdsc ufs_mem_phy_gdsc = {
 		.name = "ufs_mem_phy_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
 };
 
 static struct gdsc usb30_prim_gdsc = {