diff mbox series

ARM: dts: socfpga_cyclone5_mcvevk: Drop unused #address-cells/#size-cells

Message ID 20241107095952.73926-2-u.kleine-koenig@baylibre.com (mailing list archive)
State New
Headers show
Series ARM: dts: socfpga_cyclone5_mcvevk: Drop unused #address-cells/#size-cells | expand

Commit Message

Uwe Kleine-König Nov. 7, 2024, 9:59 a.m. UTC
The properties #address-cells and #size-cells are only useful if there
is a ranges property or child nodes with "reg" properties.

This fixes a W=1 warning:

	arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts:51.22-72.4: Warning (avoid_unnecessary_addr_size): /soc/i2c@ffc04000/stmpe811@41: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
---
 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts | 2 --
 1 file changed, 2 deletions(-)


base-commit: 5b913f5d7d7fe0f567dea8605f21da6eaa1735fb

Comments

Dinh Nguyen Nov. 8, 2024, 1:08 p.m. UTC | #1
On 11/7/24 03:59, Uwe Kleine-König wrote:
> The properties #address-cells and #size-cells are only useful if there
> is a ranges property or child nodes with "reg" properties.
> 
> This fixes a W=1 warning:
> 
> 	arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts:51.22-72.4: Warning (avoid_unnecessary_addr_size): /soc/i2c@ffc04000/stmpe811@41: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
> ---
>   arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts | 2 --
>   1 file changed, 2 deletions(-)
> 

Applied, thanks!

Dinh
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
index ceaec29770c6..c1e1264bcb09 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
@@ -50,8 +50,6 @@  &i2c0 {
 
 	stmpe1: stmpe811@41 {
 		compatible = "st,stmpe811";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x41>;
 		id = <0>;
 		blocks = <0x5>;