diff mbox series

[v6,2/5] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs

Message ID 20241113-a4_pinctrl-v6-2-35ba2401ee35@amlogic.com (mailing list archive)
State New
Headers show
Series Pinctrl: A4: Add pinctrl driver | expand

Commit Message

Xianwei Zhao via B4 Relay Nov. 13, 2024, 7:29 a.m. UTC 
From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Add the dt-bindings for Amlogic A4 pin controller, and add a new
dt-binding header file which document the GPIO bank names of all
Amlogic subsequent SoCs.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 .../bindings/pinctrl/amlogic,meson-pinctrl-a4.yaml | 80 ++++++++++++++++++++++
 include/dt-bindings/gpio/amlogic-gpio.h            | 45 ++++++++++++
 2 files changed, 125 insertions(+)

Comments

Rob Herring (Arm) Nov. 13, 2024, 8:31 a.m. UTC | #1 
On Wed, 13 Nov 2024 15:29:40 +0800, Xianwei Zhao wrote:
> Add the dt-bindings for Amlogic A4 pin controller, and add a new
> dt-binding header file which document the GPIO bank names of all
> Amlogic subsequent SoCs.
> 
> Acked-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
>  .../bindings/pinctrl/amlogic,meson-pinctrl-a4.yaml | 80 ++++++++++++++++++++++
>  include/dt-bindings/gpio/amlogic-gpio.h            | 45 ++++++++++++
>  2 files changed, 125 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a4.yaml: patternProperties:^bank@[0-9a-f]+$:properties: 'gpio-controller' is a dependency of '#gpio-cells'
	from schema $id: http://devicetree.org/meta-schemas/gpios.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241113-a4_pinctrl-v6-2-35ba2401ee35@amlogic.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a4.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a4.yaml
new file mode 100644
index 000000000000..db1d58c29478
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a4.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-a4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A4 pinmux controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Xianwei Zhao <xianwei.zhao@amlogic.com>
+
+allOf:
+  - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,a4-aobus-pinctrl
+      - amlogic,a4-periphs-pinctrl
+
+required:
+  - compatible
+
+patternProperties:
+  "^bank@[0-9a-f]+$":
+    $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 2
+
+      reg-names:
+        items:
+          - const: mux
+          - const: gpio
+
+      "#gpio-cells":
+        const: 3
+
+      gpio-line-names:
+        minItems: 8
+        maxItems: 73
+
+unevaluatedProperties:
+  type: object
+  $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      periphs_pinctrl: pinctrl@4000 {
+        compatible = "amlogic,a4-periphs-pinctrl";
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x4000 0x0 0x02e0>;
+
+        bank@0 {
+          reg = <0x0 0x0 0x0 0x0050>,
+                <0x0 0xc0 0x0 0x0220>;
+          reg-names = "mux", "gpio";
+          gpio-controller;
+          #gpio-cells = <3>;
+          gpio-ranges = <&periphs_pinctrl 0 0 73>;
+        };
+
+        cec_ao_a_h_pins: cec_ao_a_h {
+          mux {
+            groups = "cec_ao_a_h";
+            function = "cec_ao_a_h";
+            bias-disable;
+          };
+        };
+      };
+    };
diff --git a/include/dt-bindings/gpio/amlogic-gpio.h b/include/dt-bindings/gpio/amlogic-gpio.h
new file mode 100644
index 000000000000..5bfdb39eeda8
--- /dev/null
+++ b/include/dt-bindings/gpio/amlogic-gpio.h
@@ -0,0 +1,45 @@ 
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ * Author: Xianwei Zhao <xianwei.zhao@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_GPIO_H
+#define _DT_BINDINGS_AMLOGIC_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+/* Normal GPIO bank */
+#define AMLOGIC_GPIO_A		0
+#define AMLOGIC_GPIO_B		1
+#define AMLOGIC_GPIO_C		2
+#define AMLOGIC_GPIO_D		3
+#define AMLOGIC_GPIO_E		4
+#define AMLOGIC_GPIO_F		5
+#define AMLOGIC_GPIO_G		6
+#define AMLOGIC_GPIO_H		7
+#define AMLOGIC_GPIO_I		8
+#define AMLOGIC_GPIO_J		9
+#define AMLOGIC_GPIO_K		10
+#define AMLOGIC_GPIO_L		11
+#define AMLOGIC_GPIO_M		12
+#define AMLOGIC_GPIO_N		13
+#define AMLOGIC_GPIO_O		14
+#define AMLOGIC_GPIO_P		15
+#define AMLOGIC_GPIO_Q		16
+#define AMLOGIC_GPIO_R		17
+#define AMLOGIC_GPIO_S		18
+#define AMLOGIC_GPIO_T		19
+#define AMLOGIC_GPIO_U		20
+#define AMLOGIC_GPIO_V		21
+#define AMLOGIC_GPIO_W		22
+#define AMLOGIC_GPIO_X		23
+#define AMLOGIC_GPIO_Y		24
+#define AMLOGIC_GPIO_Z		25
+/* Special GPIO bank */
+#define AMLOGIC_GPIO_DV		26
+#define AMLOGIC_GPIO_AO		27
+#define AMLOGIC_GPIO_CC		28
+#define AMLOGIC_GPIO_TEST_N	29
+
+#endif /* _DT_BINDINGS_AMLOGIC_GPIO_H */