diff mbox series

[v3,22/25] arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node

Message ID 20241113133540.2005850-23-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add audio support for the Renesas RZ/G3S SoC | expand

Commit Message

Claudiu Beznea Nov. 13, 2024, 1:35 p.m. UTC
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Add versa3 clock generator node. It provides the clocks for the Ethernet
PHY, PCIe, audio devices.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v3:
- none

Changes in v2:
- none

 .../boot/dts/renesas/rzg3s-smarc-som.dtsi     | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

Comments

Biju Das Nov. 13, 2024, 1:57 p.m. UTC | #1
Hi Claudiu,

> -----Original Message-----
> From: Claudiu <claudiu.beznea@tuxon.dev>
> Sent: 13 November 2024 13:36
> Subject: [PATCH v3 22/25] arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node
> 
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> Add versa3 clock generator node. It provides the clocks for the Ethernet PHY, PCIe, audio devices.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
> 
> Changes in v3:
> - none
> 
> Changes in v2:
> - none
> 
>  .../boot/dts/renesas/rzg3s-smarc-som.dtsi     | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-
> smarc-som.dtsi
> index 2ed01d391554..6e58d47d85b0 100644
> --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
> +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
> @@ -92,6 +92,12 @@ vcc_sdhi2: regulator2 {
>  		gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  	};
> +
> +	x3_clk: x3-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;
> +	};
>  };
> 
>  #if SW_CONFIG3 == SW_ON
> @@ -152,6 +158,30 @@ &extal_clk {
> 
>  &i2c1 {
>  	status = "okay";
> +
> +	versa3: clock-generator@68 {
> +		compatible = "renesas,5l35023";
> +		reg = <0x68>;
> +		clocks = <&x3_clk>;
> +		#clock-cells = <1>;
> +		assigned-clocks = <&versa3 0>,
> +				  <&versa3 1>,
> +				  <&versa3 2>,
> +				  <&versa3 3>,
> +				  <&versa3 4>,
> +				  <&versa3 5>;
> +		assigned-clock-rates = <24000000>,
> +				       <12288000>,
> +				       <11289600>,
> +				       <25000000>,
> +				       <100000000>,
> +				       <100000000>;
> +		renesas,settings = [
> +		  80 00 11 19 4c 42 dc 2f 06 7d 20 1a 5f 1e f2 27
> +		  00 40 00 00 00 00 00 00 06 0c 19 02 3f f0 90 86
> +		  a0 80 30 30 9c
> +		];

Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

Cheers,
Biju

> +	};
>  };
> 
>  #if SW_CONFIG2 == SW_ON
> --
> 2.39.2
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index 2ed01d391554..6e58d47d85b0 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -92,6 +92,12 @@  vcc_sdhi2: regulator2 {
 		gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 #if SW_CONFIG3 == SW_ON
@@ -152,6 +158,30 @@  &extal_clk {
 
 &i2c1 {
 	status = "okay";
+
+	versa3: clock-generator@68 {
+		compatible = "renesas,5l35023";
+		reg = <0x68>;
+		clocks = <&x3_clk>;
+		#clock-cells = <1>;
+		assigned-clocks = <&versa3 0>,
+				  <&versa3 1>,
+				  <&versa3 2>,
+				  <&versa3 3>,
+				  <&versa3 4>,
+				  <&versa3 5>;
+		assigned-clock-rates = <24000000>,
+				       <12288000>,
+				       <11289600>,
+				       <25000000>,
+				       <100000000>,
+				       <100000000>;
+		renesas,settings = [
+		  80 00 11 19 4c 42 dc 2f 06 7d 20 1a 5f 1e f2 27
+		  00 40 00 00 00 00 00 00 06 0c 19 02 3f f0 90 86
+		  a0 80 30 30 9c
+		];
+	};
 };
 
 #if SW_CONFIG2 == SW_ON