| Message ID | a155d0d0fb1d9b5eece86099af9b5c0fb76dcac2.1731626099.git.marcelo.schmitt@analog.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Timestamp and PulSAR support for ad4000 | expand |
On 11/14/24 5:50 PM, Marcelo Schmitt wrote: > Extend the AD4000 series device tree documentation to also describe > PulSAR devices. > > Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> > --- > .../bindings/iio/adc/adi,ad4000.yaml | 115 +++++++++++++++++- > 1 file changed, 114 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > index e413a9d8d2a2..35049071a9de 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > @@ -19,6 +19,21 @@ description: | > https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf > https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf > https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7685.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7686.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7687.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7688.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7690.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7691.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7693.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7694.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7942.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7946.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7980.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7982.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7983.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7984.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7988-1_7988-5.pdf It would be nice to sort these lowest number first. > > $ref: /schemas/spi/spi-peripheral-props.yaml# > > @@ -63,6 +78,38 @@ properties: > > - const: adi,adaq4003 > > + - const: adi,ad7946 > + - items: > + - enum: > + - adi,ad7942 > + - const: adi,ad7946 > + > + - const: adi,ad7983 > + - items: > + - enum: > + - adi,ad7980 > + - adi,ad7988-5 > + - adi,ad7686 > + - adi,ad7685 > + - adi,ad7694 > + - adi,ad7988-1 > + - const: adi,ad7983 > + > + - const: adi,ad7688 > + - items: > + - enum: > + - adi,ad7693 > + - adi,ad7687 > + - const: adi,ad7688 > + > + - const: adi,ad7984 > + - items: > + - enum: > + - adi,ad7982 > + - adi,ad7690 > + - adi,ad7691 > + - const: adi,ad7984 > + IMHO, having fallbacks just makes the bindings harder to use and doesn't actually provide any useful benefit. And with this many chips, it can be easy to overlook a small difference in one chips, like ad7694 not having VIO pin, so is it really fallback compatible? Easier to just avoid the question and not have fallbacks. > reg: > maxItems: 1 > > @@ -129,10 +176,76 @@ required: > - compatible > - reg > - vdd-supply > - - vio-supply > - ref-supply > > allOf: > + # AD7694 doesn't have a VIO pin It sounds like using not: could make this if: a lot shorter. Also, it looks like ad7983 doesn't have the pin either. > + - if: > + properties: > + compatible: > + contains: > + enum: > + - adi,ad4000 > + - adi,ad4001 > + - adi,ad4002 > + - adi,ad4003 > + - adi,ad4004 > + - adi,ad4005 > + - adi,ad4006 > + - adi,ad4007 > + - adi,ad4008 > + - adi,ad4010 > + - adi,ad4011 > + - adi,ad4020 > + - adi,ad4021 > + - adi,ad4022 > + - adi,adaq4001 > + - adi,adaq4003 > + - adi,ad7685 > + - adi,ad7686 > + - adi,ad7687 > + - adi,ad7688 > + - adi,ad7690 > + - adi,ad7691 > + - adi,ad7693 > + - adi,ad7942 > + - adi,ad7946 > + - adi,ad7980 > + - adi,ad7982 > + - adi,ad7983 > + - adi,ad7984 > + - adi,ad7988-1 > + - adi,ad7988-5 > + then: > + required: > + - vio-supply > + # Single-channel PulSAR devices have SDI either tied to VIO, GND, or host CS. To me, the more interesting thing to say here is that the sdi option is omitted because these chips don't have a programmable register. > + - if: > + properties: > + compatible: > + contains: > + enum: > + - adi,ad7685 > + - adi,ad7686 > + - adi,ad7687 > + - adi,ad7688 > + - adi,ad7690 > + - adi,ad7691 > + - adi,ad7693 > + - adi,ad7694 > + - adi,ad7942 > + - adi,ad7946 > + - adi,ad7980 > + - adi,ad7982 > + - adi,ad7983 > + - adi,ad7984 > + - adi,ad7988-1 > + - adi,ad7988-5 > + then: > + properties: > + adi,sdi-pin: > + enum: [ high, low, cs ] > + default: high For the similar ad7944, Rob suggested that the default should be the equivalent of "cs" since that is most like "regular" SPI. So I think it makes sense do the same here. (The adi,spi-mode property in the ad7944 binding is named a bit different, single = high, chain = low and _property omitted_ (default) = cs) > # The configuration register can only be accessed if SDI is connected to MOSI > - if: > required:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml index e413a9d8d2a2..35049071a9de 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml @@ -19,6 +19,21 @@ description: | https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7685.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7686.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7687.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7688.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7690.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7691.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7693.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7694.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7942.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7946.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7980.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7982.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7983.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7984.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7988-1_7988-5.pdf $ref: /schemas/spi/spi-peripheral-props.yaml# @@ -63,6 +78,38 @@ properties: - const: adi,adaq4003 + - const: adi,ad7946 + - items: + - enum: + - adi,ad7942 + - const: adi,ad7946 + + - const: adi,ad7983 + - items: + - enum: + - adi,ad7980 + - adi,ad7988-5 + - adi,ad7686 + - adi,ad7685 + - adi,ad7694 + - adi,ad7988-1 + - const: adi,ad7983 + + - const: adi,ad7688 + - items: + - enum: + - adi,ad7693 + - adi,ad7687 + - const: adi,ad7688 + + - const: adi,ad7984 + - items: + - enum: + - adi,ad7982 + - adi,ad7690 + - adi,ad7691 + - const: adi,ad7984 + reg: maxItems: 1 @@ -129,10 +176,76 @@ required: - compatible - reg - vdd-supply - - vio-supply - ref-supply allOf: + # AD7694 doesn't have a VIO pin + - if: + properties: + compatible: + contains: + enum: + - adi,ad4000 + - adi,ad4001 + - adi,ad4002 + - adi,ad4003 + - adi,ad4004 + - adi,ad4005 + - adi,ad4006 + - adi,ad4007 + - adi,ad4008 + - adi,ad4010 + - adi,ad4011 + - adi,ad4020 + - adi,ad4021 + - adi,ad4022 + - adi,adaq4001 + - adi,adaq4003 + - adi,ad7685 + - adi,ad7686 + - adi,ad7687 + - adi,ad7688 + - adi,ad7690 + - adi,ad7691 + - adi,ad7693 + - adi,ad7942 + - adi,ad7946 + - adi,ad7980 + - adi,ad7982 + - adi,ad7983 + - adi,ad7984 + - adi,ad7988-1 + - adi,ad7988-5 + then: + required: + - vio-supply + # Single-channel PulSAR devices have SDI either tied to VIO, GND, or host CS. + - if: + properties: + compatible: + contains: + enum: + - adi,ad7685 + - adi,ad7686 + - adi,ad7687 + - adi,ad7688 + - adi,ad7690 + - adi,ad7691 + - adi,ad7693 + - adi,ad7694 + - adi,ad7942 + - adi,ad7946 + - adi,ad7980 + - adi,ad7982 + - adi,ad7983 + - adi,ad7984 + - adi,ad7988-1 + - adi,ad7988-5 + then: + properties: + adi,sdi-pin: + enum: [ high, low, cs ] + default: high # The configuration register can only be accessed if SDI is connected to MOSI - if: required:
Extend the AD4000 series device tree documentation to also describe PulSAR devices. Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> --- .../bindings/iio/adc/adi,ad4000.yaml | 115 +++++++++++++++++- 1 file changed, 114 insertions(+), 1 deletion(-)