| Message ID | 20241119002815.600608-1-bvanassche@acm.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | Improve write performance for zoned UFS devices | expand |
On 11/19/24 09:27, Bart Van Assche wrote: > Hi Damien and Christoph, > > This patch series improves small write IOPS by a factor of four (+300%) for > zoned UFS devices on my test setup with an UFSHCI 3.0 controller. Although > you are probably busy because the merge window is open, please take a look > at this patch series when you have the time. This patch series is organized > as follows: > - Bug fixes for existing code at the start of the series. > - The write pipelining support implementation comes after the bug fixes. Impressive improvements but the changes are rather invasive. Have you tried simpler solution like forcing unplugging a zone write plug from the driver once a command is passed to the driver and the driver did not reject it ? It seems like this would make everything simpler on the block layer side. But I am not sure if the performance gains would be the same.
On Mon, Nov 18, 2024 at 04:27:49PM -0800, Bart Van Assche wrote: > Hi Damien and Christoph, > > This patch series improves small write IOPS by a factor of four (+300%) for > zoned UFS devices on my test setup with an UFSHCI 3.0 controller. What's your exact test setup? Which upstream kernel support zoned UFS device are using?
On 11/19/24 4:25 AM, Christoph Hellwig wrote: > What's your exact test setup? Pixel 2023 and 2025 development boards with android-mainline kernel (https://android.googlesource.com/kernel/common/+/refs/heads/android-mainline). The android mainline kernel tracks the upstream kernel closely. While the performance of Pixel development boards is identical to that of the corresponding smartphone generation, these development boards have the following advantages: - A UFS socket that allows swapping UFS devices without any soldering. - A USB port that makes it easy to monitor and capture kernel log messages. > Which upstream kernel support zoned UFS device are using? A Micron ZUFS device. Micron zoned UFS devices have a zone size that is a power of two. Thanks, Bart.
On 11/19/24 12:01 AM, Damien Le Moal wrote: > Impressive improvements but the changes are rather invasive. Have you tried > simpler solution like forcing unplugging a zone write plug from the driver once > a command is passed to the driver and the driver did not reject it ? It seems > like this would make everything simpler on the block layer side. But I am not > sure if the performance gains would be the same. Hi Damien, I'm not sure that the approach of submitting a new zoned write if the driver did not reject the previous write would result in a simpler solution. SCSI devices are allowed to respond to any command with a unit attention instead of processing the command. If a unit attention is reported, the SCSI core requeues the command. In other words, even with this approach, proper support for requeued zoned writes in the block layer is required. Additionally, that approach is not compatible with using .queue_rqs(). While the SCSI core does not yet support a .queue_rqs() callback, I think it would be good to have this support in the SCSI core. If we need requeuing support anyway, why to select an approach that probably will result in lower performance than what has been implemented in this patch series? Thanks, Bart.
On 11/20/24 04:08, Bart Van Assche wrote: > On 11/19/24 12:01 AM, Damien Le Moal wrote: >> Impressive improvements but the changes are rather invasive. Have you tried >> simpler solution like forcing unplugging a zone write plug from the driver once >> a command is passed to the driver and the driver did not reject it ? It seems >> like this would make everything simpler on the block layer side. But I am not >> sure if the performance gains would be the same. > > Hi Damien, > > I'm not sure that the approach of submitting a new zoned write if the > driver did not reject the previous write would result in a simpler > solution. SCSI devices are allowed to respond to any command with a unit > attention instead of processing the command. If a unit attention is > reported, the SCSI core requeues the command. In other words, even with > this approach, proper support for requeued zoned writes in the block > layer is required. Yes, but it would be vastly simpler because you would be guaranteed to having only a single write request per zone being in-flight between the write plug and the device at any time. So the requeue would not need reordering, and likely not need any special code at all. nless I am missing something, this would be simpler, no ? The main question though with such approach is: does it give you the same performance improvements as your current (more invasive) approach ? > Additionally, that approach is not compatible with using .queue_rqs(). > While the SCSI core does not yet support a .queue_rqs() callback, I > think it would be good to have this support in the SCSI core. I do not understand why it is not compatible. What is the problem ? > If we need requeuing support anyway, why to select an approach that > probably will result in lower performance than what has been implemented > in this patch series? I am only trying to see if there is not a simpler approach than what you did. The less changes, the better, right ?
Hi Damien and Christoph, This patch series improves small write IOPS by a factor of four (+300%) for zoned UFS devices on my test setup with an UFSHCI 3.0 controller. Although you are probably busy because the merge window is open, please take a look at this patch series when you have the time. This patch series is organized as follows: - Bug fixes for existing code at the start of the series. - The write pipelining support implementation comes after the bug fixes. Thanks, Bart. Changes compared to v15: - Reworked this patch series on top of the zone write plugging approach. - Moved support for requeuing requests from the SCSI core into the block layer core. - In the UFS driver, instead of disabling write pipelining if auto-hibernation is enabled, rely on the requeuing mechanism to handle reordering caused by resuming from auto-hibernation. Changes compared to v14: - Removed the drivers/scsi/Kconfig.kunit and drivers/scsi/Makefile.kunit files. Instead, modified drivers/scsi/Kconfig and added #include "*_test.c" directives in the appropriate .c files. Removed the EXPORT_SYMBOL() directives that were added to make the unit tests link. - Fixed a double free in a unit test. Changes compared to v13: - Reworked patch "block: Preserve the order of requeued zoned writes". - Addressed a performance concern by removing the eh_needs_prepare_resubmit SCSI driver callback and by introducing the SCSI host template flag .needs_prepare_resubmit instead. - Added a patch that adds a 'host' argument to scsi_eh_flush_done_q(). - Made the code in unit tests less repetitive. Changes compared to v12: - Added two new patches: "block: Preserve the order of requeued zoned writes" and "scsi: sd: Add a unit test for sd_cmp_sector()" - Restricted the number of zoned write retries. To my surprise I had to add "&& scmd->retries <= scmd->allowed" in the SCSI error handler to limit the number of retries. - In patch "scsi: ufs: Inform the block layer about write ordering", only set ELEVATOR_F_ZBD_SEQ_WRITE for zoned block devices. Changes compared to v11: - Fixed a NULL pointer dereference that happened when booting from an ATA device by adding an scmd->device != NULL check in scsi_needs_preparation(). - Updated Reviewed-by tags. Changes compared to v10: - Dropped the UFS MediaTek and HiSilicon patches because these are not correct and because it is safe to drop these patches. - Updated Acked-by / Reviewed-by tags. Changes compared to v9: - Introduced an additional scsi_driver callback: .eh_needs_prepare_resubmit(). - Renamed the scsi_debug kernel module parameter 'no_zone_write_lock' into 'preserves_write_order'. - Fixed an out-of-bounds access in the unit scsi_call_prepare_resubmit() unit test. - Wrapped ufshcd_auto_hibern8_update() calls in UFS host drivers with WARN_ON_ONCE() such that a kernel stack appears in case an error code is returned. - Elaborated a comment in the UFSHCI driver. Changes compared to v8: - Fixed handling of 'driver_preserves_write_order' and 'use_zone_write_lock' in blk_stack_limits(). - Added a comment in disk_set_zoned(). - Modified blk_req_needs_zone_write_lock() such that it returns false if q->limits.use_zone_write_lock is false. - Modified disk_clear_zone_settings() such that it clears q->limits.use_zone_write_lock. - Left out one change from the mq-deadline patch that became superfluous due to the blk_req_needs_zone_write_lock() change. - Modified scsi_call_prepare_resubmit() such that it only calls list_sort() if zoned writes have to be resubmitted for which zone write locking is disabled. - Added an additional unit test for scsi_call_prepare_resubmit(). - Modified the sorting code in the sd driver such that only those SCSI commands are sorted for which write locking is disabled. - Modified sd_zbc.c such that ELEVATOR_F_ZBD_SEQ_WRITE is only set if the write order is not preserved. - Included three patches for UFS host drivers that rework code that wrote directly to the auto-hibernation controller register. - Modified the UFS driver such that enabling auto-hibernation is not allowed if a zoned logical unit is present and if the controller operates in legacy mode. - Also in the UFS driver, simplified ufshcd_auto_hibern8_update(). Changes compared to v7: - Split the queue_limits member variable `use_zone_write_lock' into two member variables: `use_zone_write_lock' (set by disk_set_zoned()) and `driver_preserves_write_order' (set by the block driver or SCSI LLD). This should clear up the confusion about the purpose of this variable. - Moved the code for sorting SCSI commands by LBA from the SCSI error handler into the SCSI disk (sd) driver as requested by Christoph. Changes compared to v6: - Removed QUEUE_FLAG_NO_ZONE_WRITE_LOCK and instead introduced a flag in the request queue limits data structure. Changes compared to v5: - Renamed scsi_cmp_lba() into scsi_cmp_sector(). - Improved several source code comments. Changes compared to v4: - Dropped the patch that introduces the REQ_NO_ZONE_WRITE_LOCK flag. - Dropped the null_blk patch and added two scsi_debug patches instead. - Dropped the f2fs patch. - Split the patch for the UFS driver into two patches. - Modified several patch descriptions and source code comments. - Renamed dd_use_write_locking() into dd_use_zone_write_locking(). - Moved the list_sort() call from scsi_unjam_host() into scsi_eh_flush_done_q() such that sorting happens just before reinserting. - Removed the scsi_cmd_retry_allowed() call from scsi_check_sense() to make sure that the retry counter is adjusted once per retry instead of twice. Changes compared to v3: - Restored the patch that introduces QUEUE_FLAG_NO_ZONE_WRITE_LOCK. That patch had accidentally been left out from v2. - In patch "block: Introduce the flag REQ_NO_ZONE_WRITE_LOCK", improved the patch description and added the function blk_no_zone_write_lock(). - In patch "block/mq-deadline: Only use zone locking if necessary", moved the blk_queue_is_zoned() call into dd_use_write_locking(). - In patch "fs/f2fs: Disable zone write locking", set REQ_NO_ZONE_WRITE_LOCK from inside __bio_alloc() instead of in f2fs_submit_write_bio(). Changes compared to v2: - Renamed the request queue flag for disabling zone write locking. - Introduced a new request flag for disabling zone write locking. - Modified the mq-deadline scheduler such that zone write locking is only disabled if both flags are set. - Added an F2FS patch that sets the request flag for disabling zone write locking. - Only disable zone write locking in the UFS driver if auto-hibernation is disabled. Changes compared to v1: - Left out the patches that are already upstream. - Switched the approach in patch "scsi: Retry unaligned zoned writes" from retrying immediately to sending unaligned write commands to the SCSI error handler. Bart Van Assche (26): blk-zoned: Fix a reference count leak blk-zoned: Split disk_zone_wplugs_work() blk-zoned: Split queue_zone_wplugs_show() blk-zoned: Only handle errors after pending zoned writes have completed blk-zoned: Fix a deadlock triggered by unaligned writes blk-zoned: Fix requeuing of zoned writes block: Support block drivers that preserve the order of write requests dm-linear: Report to the block layer that the write order is preserved mq-deadline: Remove a local variable blk-mq: Clean up blk_mq_requeue_work() block: Optimize blk_mq_submit_bio() for the cache hit scenario block: Rework request allocation in blk_mq_submit_bio() block: Support allocating from a specific software queue blk-mq: Restore the zoned write order when requeuing blk-zoned: Document the locking order blk-zoned: Document locking assumptions blk-zoned: Uninline functions that are not in the hot path blk-zoned: Make disk_should_remove_zone_wplug() more robust blk-zoned: Add an argument to blk_zone_plug_bio() blk-zoned: Support pipelining of zoned writes scsi: core: Retry unaligned zoned writes scsi: sd: Increase retry count for zoned writes scsi: scsi_debug: Add the preserves_write_order module parameter scsi: scsi_debug: Support injecting unaligned write errors scsi: scsi_debug: Skip host/bus reset settle delay scsi: ufs: Inform the block layer about write ordering block/bfq-iosched.c | 2 + block/blk-mq.c | 97 ++++++---- block/blk-mq.h | 3 + block/blk-settings.c | 2 + block/blk-zoned.c | 376 +++++++++++++++++++++++++------------- block/blk.h | 33 +++- block/kyber-iosched.c | 2 + block/mq-deadline.c | 10 +- drivers/md/dm-linear.c | 6 + drivers/md/dm.c | 2 +- drivers/scsi/scsi_debug.c | 22 ++- drivers/scsi/scsi_error.c | 16 ++ drivers/scsi/sd.c | 7 + drivers/ufs/core/ufshcd.c | 7 + include/linux/blk-mq.h | 20 +- include/linux/blkdev.h | 11 +- 16 files changed, 444 insertions(+), 172 deletions(-)