diff mbox series

[2/5] gpu: drm: adp: Add Apple Display Pipe driver

Message ID 20241124-adpdrm-v1-2-3191d8e6e49a@gmail.com (mailing list archive)
State New
Headers show
Series Driver for pre-DCP apple display controller. | expand

Commit Message

Sasha Finkelstein via B4 Relay Nov. 24, 2024, 10:29 p.m. UTC
From: Sasha Finkelstein <fnkl.kernel@gmail.com>

This display controller is present on M-series chips and is used
to drive the touchbar display.

Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
 drivers/gpu/drm/Kconfig       |   2 +
 drivers/gpu/drm/Makefile      |   1 +
 drivers/gpu/drm/adp/Kconfig   |  14 +
 drivers/gpu/drm/adp/Makefile  |   5 +
 drivers/gpu/drm/adp/adp_drv.c | 814 ++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 836 insertions(+)

Comments

Neil Armstrong Nov. 25, 2024, 8:50 a.m. UTC | #1
Hi,

On 24/11/2024 23:29, Sasha Finkelstein via B4 Relay wrote:
> From: Sasha Finkelstein <fnkl.kernel@gmail.com>

Please use "drm: " and drop gpu from commit title.

> 
> This display controller is present on M-series chips and is used
> to drive the touchbar display.
> 
> Co-developed-by: Janne Grunau <j@jannau.net>
> Signed-off-by: Janne Grunau <j@jannau.net>
> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
> ---
>   drivers/gpu/drm/Kconfig       |   2 +
>   drivers/gpu/drm/Makefile      |   1 +
>   drivers/gpu/drm/adp/Kconfig   |  14 +
>   drivers/gpu/drm/adp/Makefile  |   5 +
>   drivers/gpu/drm/adp/adp_drv.c | 814 ++++++++++++++++++++++++++++++++++++++++++
>   5 files changed, 836 insertions(+)
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 5504721007cc190e7d768d42aa9633baa0115f5e..acd1111f1773ef044c306c62ad9f850996259ef1 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -499,6 +499,8 @@ source "drivers/gpu/drm/mcde/Kconfig"
>   
>   source "drivers/gpu/drm/tidss/Kconfig"
>   
> +source "drivers/gpu/drm/adp/Kconfig"
> +
>   source "drivers/gpu/drm/xlnx/Kconfig"
>   
>   source "drivers/gpu/drm/gud/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 463afad1b5ca6275e61223adc8ca036c3d4d6b03..acd8d8943ef2bf85c80db7c218c59a7ec2df56da 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -213,6 +213,7 @@ obj-y			+= mxsfb/
>   obj-y			+= tiny/
>   obj-$(CONFIG_DRM_PL111) += pl111/
>   obj-$(CONFIG_DRM_TVE200) += tve200/
> +obj-$(CONFIG_DRM_ADP) += adp/
>   obj-$(CONFIG_DRM_XEN) += xen/
>   obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
>   obj-$(CONFIG_DRM_LIMA)  += lima/
> diff --git a/drivers/gpu/drm/adp/Kconfig b/drivers/gpu/drm/adp/Kconfig
> new file mode 100644
> index 0000000000000000000000000000000000000000..3c570aeb14700611edd7e2738367090ebb30c346
> --- /dev/null
> +++ b/drivers/gpu/drm/adp/Kconfig
> @@ -0,0 +1,14 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR MIT
> +config DRM_ADP
> +	tristate "DRM Support for pre-DCP Apple display controllers"
> +	depends on DRM && OF && ARM64
> +	depends on ARCH_APPLE || COMPILE_TEST
> +	select DRM_KMS_HELPER
> +	select DRM_KMS_DMA_HELPER
> +	select DRM_GEM_DMA_HELPER
> +	select VIDEOMODE_HELPERS
> +	select DRM_MIPI_DSI
> +	help
> +	  Chose this option if you have an Apple Arm laptop with a touchbar.
> +
> +	  If M is selected, this module will be called adpdrm.
> diff --git a/drivers/gpu/drm/adp/Makefile b/drivers/gpu/drm/adp/Makefile
> new file mode 100644
> index 0000000000000000000000000000000000000000..28a5d4b4a267f3e2abe9f0ea9e11fae51ca18b88
> --- /dev/null
> +++ b/drivers/gpu/drm/adp/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR MIT
> +
> +adpdrm-y := adp_drv.o
> +obj-$(CONFIG_DRM_ADP) += adpdrm.o
> +obj-$(CONFIG_DRM_ADP) += panel-summit.o
> diff --git a/drivers/gpu/drm/adp/adp_drv.c b/drivers/gpu/drm/adp/adp_drv.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..36510194e18161ef6514885c764b2e7085c587e5
> --- /dev/null
> +++ b/drivers/gpu/drm/adp/adp_drv.c
> @@ -0,0 +1,814 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/anon_inodes.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/file.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +#include <asm/current.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_damage_helper.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drm_fb_dma_helper.h>
> +#include <drm/drm_file.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_gem_atomic_helper.h>
> +#include <drm/drm_gem_dma_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_simple_kms_helper.h>
> +#include <drm/drm_vblank.h>
> +
> +#define ADP_INT_STATUS 0x34
> +#define ADP_INT_STATUS_INT_MASK 0x7
> +#define ADP_INT_STATUS_VBLANK 0x1
> +#define ADP_CTRL 0x100
> +#define ADP_CTRL_VBLANK_ON 0x12
> +#define ADP_CTRL_FIFO_ON 0x601
> +#define ADP_SCREEN_SIZE 0x0c
> +#define ADP_SCREEN_HSIZE GENMASK(15, 0)
> +#define ADP_SCREEN_VSIZE GENMASK(31, 16)
> +
> +#define ADBE_FIFO 0x10c0
> +#define ADBE_FIFO_SYNC 0xc0000000
> +
> +#define ADBE_BLEND_BYPASS 0x2020
> +#define ADBE_BLEND_EN1 0x2028
> +#define ADBE_BLEND_EN2 0x2074
> +#define ADBE_BLEND_EN3 0x202c
> +#define ADBE_BLEND_EN4 0x2034
> +#define ADBE_MASK_BUF 0x2200
> +
> +#define ADBE_SRC_START 0x4040
> +#define ADBE_SRC_SIZE 0x4048
> +#define ADBE_DST_START 0x4050
> +#define ADBE_DST_SIZE 0x4054
> +#define ADBE_STRIDE 0x4038
> +#define ADBE_FB_BASE 0x4030
> +
> +#define ADBE_LAYER_EN1 0x4020
> +#define ADBE_LAYER_EN2 0x4068
> +#define ADBE_LAYER_EN3 0x40b4
> +#define ADBE_LAYER_EN4 0x40f4
> +#define ADBE_SCALE_CTL 0x40ac
> +#define ADBE_SCALE_CTL_BYPASS 0x100000
> +
> +#define ADBE_LAYER_CTL 0x1038
> +#define ADBE_LAYER_CTL_ENABLE 0x10000
> +
> +#define ADBE_PIX_FMT 0x402c
> +#define ADBE_PIX_FMT_XRGB32 0x53e4001
> +
> +#define DSI_GEN_HDR 0x6c
> +#define DSI_GEN_PLD_DATA 0x70
> +
> +#define DSI_CMD_PKT_STATUS 0x74
> +
> +#define GEN_PLD_R_EMPTY BIT(4)
> +#define GEN_PLD_W_FULL BIT(3)
> +#define GEN_PLD_W_EMPTY BIT(2)
> +#define GEN_CMD_FULL BIT(1)
> +#define GEN_CMD_EMPTY BIT(0)
> +#define GEN_RD_CMD_BUSY BIT(6)
> +#define CMD_PKT_STATUS_TIMEOUT_US 20000
> +
> +static int adp_open(struct inode *inode, struct file *filp)
> +{
> +	/*
> +	 * The modesetting driver does not check the non-desktop connector
> +	 * property and keeps the device open and locked. If the touchbar daemon
> +	 * opens the device first modesetting breaks the whole X session.
> +	 * Simply refuse to open the device for X11 server processes as
> +	 * workaround.
> +	 */
> +	if (current->comm[0] == 'X')
> +		return -EBUSY;
> +
> +	return drm_open(inode, filp);
> +}
> +
> +static const struct file_operations adp_fops = {
> +	.owner          = THIS_MODULE,
> +	.open           = adp_open,
> +	.release        = drm_release,
> +	.unlocked_ioctl = drm_ioctl,
> +	.compat_ioctl   = drm_compat_ioctl,
> +	.poll           = drm_poll,
> +	.read           = drm_read,
> +	.llseek         = noop_llseek,
> +	.mmap           = drm_gem_mmap,
> +	.fop_flags      = FOP_UNSIGNED_OFFSET,
> +	DRM_GEM_DMA_UNMAPPED_AREA_FOPS
> +};
> +
> +static int adp_drm_gem_dumb_create(struct drm_file *file_priv,
> +					struct drm_device *drm,
> +					struct drm_mode_create_dumb *args)
> +{
> +	args->height = ALIGN(args->height, 64);
> +	args->size = args->pitch * args->height;
> +
> +	return drm_gem_dma_dumb_create_internal(file_priv, drm, args);
> +}
> +
> +static const struct drm_driver adp_driver = {
> +	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
> +	.fops = &adp_fops,
> +	DRM_GEM_DMA_DRIVER_OPS_VMAP_WITH_DUMB_CREATE(adp_drm_gem_dumb_create),
> +	.name = "adp",
> +	.desc = "Apple Display Pipe DRM Driver",
> +	.date = "20230412",
> +	.major = 0,
> +	.minor = 1,
> +};
> +
> +struct adp_drv_private {
> +	struct drm_device drm;
> +	struct drm_crtc crtc;
> +	struct drm_encoder encoder;
> +	struct drm_connector connector;
> +	struct mipi_dsi_host dsi;
> +	void __iomem *be;
> +	void __iomem *fe;
> +	void __iomem *mipi;
> +	u32 *mask_buf;
> +	u64 mask_buf_size;
> +	dma_addr_t mask_iova;
> +	int be_irq;
> +	int fe_irq;
> +	spinlock_t irq_lock;
> +	struct drm_pending_vblank_event *event;
> +};
> +
> +struct adp_plane {
> +	struct drm_plane base_plane;
> +	u8 id;
> +};
> +
> +#define to_adp(x) container_of(x, struct adp_drv_private, drm)
> +#define crtc_to_adp(x) container_of(x, struct adp_drv_private, crtc)
> +#define conn_to_adp(x) container_of(x, struct adp_drv_private, connector)
> +#define mipi_to_adp(x) container_of(x, struct adp_drv_private, dsi)
> +
> +static int adp_plane_atomic_check(struct drm_plane *plane,
> +				    struct drm_atomic_state *state)
> +{
> +	struct drm_plane_state *new_plane_state;
> +	struct drm_crtc_state *crtc_state;
> +
> +	new_plane_state = drm_atomic_get_new_plane_state(state, plane);
> +
> +	if (!new_plane_state->crtc)
> +		return 0;
> +
> +	crtc_state = drm_atomic_get_crtc_state(state, new_plane_state->crtc);
> +	if (IS_ERR(crtc_state))
> +		return PTR_ERR(crtc_state);
> +	return drm_atomic_helper_check_plane_state(new_plane_state,
> +						   crtc_state,
> +						   DRM_PLANE_NO_SCALING,
> +						   DRM_PLANE_NO_SCALING,
> +						   true, true);
> +}
> +
> +static void adp_plane_atomic_update(struct drm_plane *plane,
> +				    struct drm_atomic_state *state)
> +{
> +	struct adp_drv_private *adp;
> +	struct drm_rect src_rect;
> +	struct drm_gem_dma_object *obj;
> +	struct drm_framebuffer *fb;
> +	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
> +	u32 src_pos, src_size, dst_pos, dst_size;
> +
> +	if (!plane || !new_state)
> +		return;
> +
> +	fb = new_state->fb;
> +	if (!fb)
> +		return;
> +	adp = to_adp(plane->dev);
> +
> +	drm_rect_fp_to_int(&src_rect, &new_state->src);
> +	src_pos = src_rect.x1 << 16 | src_rect.y1;
> +	dst_pos = new_state->dst.x1 << 16 | new_state->dst.y1;
> +	src_size = drm_rect_width(&src_rect) << 16 | drm_rect_height(&src_rect);
> +	dst_size = drm_rect_width(&new_state->dst) << 16 |
> +		drm_rect_height(&new_state->dst);
> +	writel(src_pos, adp->be + ADBE_SRC_START);
> +	writel(src_size, adp->be + ADBE_SRC_SIZE);
> +	writel(dst_pos, adp->be + ADBE_DST_START);
> +	writel(dst_size, adp->be + ADBE_DST_SIZE);
> +	writel(fb->pitches[0], adp->be + ADBE_STRIDE);
> +	obj = drm_fb_dma_get_gem_obj(fb, 0);
> +	if (obj)
> +		writel(obj->dma_addr + fb->offsets[0], adp->be + ADBE_FB_BASE);
> +
> +	writel(0x1, adp->be + ADBE_LAYER_EN1);
> +	writel(0x1, adp->be + ADBE_LAYER_EN2);
> +	writel(0x1, adp->be + ADBE_LAYER_EN3);
> +	writel(0x1, adp->be + ADBE_LAYER_EN4);

BIT(0) ?

> +	writel(ADBE_SCALE_CTL_BYPASS, adp->be + ADBE_SCALE_CTL);
> +	writel(ADBE_LAYER_CTL_ENABLE | 0x1, adp->be + ADBE_LAYER_CTL);

                                        BIT(0) ?

> +	writel(ADBE_PIX_FMT_XRGB32, adp->be + ADBE_PIX_FMT);
> +
> +}
> +
> +static void adp_plane_atomic_disable(struct drm_plane *plane,
> +				     struct drm_atomic_state *state)
> +{
> +	struct adp_drv_private *adp = to_adp(plane->dev);
> +
> +	writel(0x0, adp->be + ADBE_LAYER_EN1);
> +	writel(0x0, adp->be + ADBE_LAYER_EN2);
> +	writel(0x0, adp->be + ADBE_LAYER_EN3);
> +	writel(0x0, adp->be + ADBE_LAYER_EN4);
> +	writel(ADBE_LAYER_CTL_ENABLE, adp->be + ADBE_LAYER_CTL);
> +}
> +
> +static const struct drm_plane_helper_funcs adp_plane_helper_funcs = {
> +	.atomic_check = adp_plane_atomic_check,
> +	.atomic_update = adp_plane_atomic_update,
> +	.atomic_disable = adp_plane_atomic_disable,
> +	DRM_GEM_SHADOW_PLANE_HELPER_FUNCS
> +};
> +
> +static const struct drm_plane_funcs adp_plane_funcs = {
> +	.update_plane = drm_atomic_helper_update_plane,
> +	.disable_plane = drm_atomic_helper_disable_plane,
> +	DRM_GEM_SHADOW_PLANE_FUNCS
> +};
> +
> +static const u32 plane_formats[] = {
> +	DRM_FORMAT_XRGB8888,
> +};
> +
> +#define ALL_CRTCS 1
> +
> +static struct adp_plane *adp_plane_new(struct adp_drv_private *adp, u8 id)
> +{
> +	struct drm_device *drm = &adp->drm;
> +	struct adp_plane *plane;
> +	enum drm_plane_type plane_type;
> +
> +	plane_type = (id == 0) ? DRM_PLANE_TYPE_PRIMARY :
> +		DRM_PLANE_TYPE_OVERLAY;
> +
> +	plane = drmm_universal_plane_alloc(drm, struct adp_plane, base_plane,
> +					   ALL_CRTCS, &adp_plane_funcs,
> +					   plane_formats, ARRAY_SIZE(plane_formats),
> +					   NULL, plane_type, "plane %d", id);
> +	if (!plane) {
> +		drm_err(drm, "failed to allocate plane");
> +		return ERR_PTR(-ENOMEM);
> +	}
> +	plane->id = id;
> +
> +	drm_plane_helper_add(&plane->base_plane, &adp_plane_helper_funcs);
> +	return plane;
> +}
> +
> +static void adp_enable_vblank(struct adp_drv_private *adp)
> +{
> +	u32 cur_ctrl;
> +
> +	writel(ADP_INT_STATUS_INT_MASK, adp->fe + ADP_INT_STATUS);
> +
> +	cur_ctrl = readl(adp->fe + ADP_CTRL);
> +	writel(cur_ctrl | ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
> +}
> +
> +static int adp_crtc_enable_vblank(struct drm_crtc *crtc)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct adp_drv_private *adp = to_adp(dev);
> +
> +	adp_enable_vblank(adp);
> +
> +	return 0;
> +}
> +
> +static void adp_disable_vblank(struct adp_drv_private *adp)
> +{
> +	u32 cur_ctrl;
> +
> +	cur_ctrl = readl(adp->fe + ADP_CTRL);
> +	writel(cur_ctrl & ~ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
> +	writel(ADP_INT_STATUS_INT_MASK, adp->fe + ADP_INT_STATUS);
> +}
> +
> +static void adp_crtc_disable_vblank(struct drm_crtc *crtc)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct adp_drv_private *adp = to_adp(dev);
> +
> +	adp_disable_vblank(adp);
> +}
> +
> +
Duplicate empty line

> +static void adp_crtc_atomic_enable(struct drm_crtc *crtc,
> +				   struct drm_atomic_state *state)
> +{
> +	struct adp_drv_private *adp = crtc_to_adp(crtc);
> +
> +	writel(0x1, adp->be + ADBE_BLEND_EN2);
> +	writel(0x10, adp->be + ADBE_BLEND_EN1);

BIT(4) ?

> +	writel(0x1, adp->be + ADBE_BLEND_EN3);
> +	writel(0x1, adp->be + ADBE_BLEND_BYPASS);
> +	writel(0x1, adp->be + ADBE_BLEND_EN4);

BIT(0) ?

> +}
> +
> +static void adp_crtc_atomic_disable(struct drm_crtc *crtc,
> +				    struct drm_atomic_state *state)
> +{
> +	struct adp_drv_private *adp = crtc_to_adp(crtc);
> +	struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
> +
> +	drm_atomic_helper_disable_planes_on_crtc(old_state, false);
> +
> +	writel(0x0, adp->be + ADBE_BLEND_EN2);
> +	writel(0x0, adp->be + ADBE_BLEND_EN1);
> +	writel(0x0, adp->be + ADBE_BLEND_EN3);
> +	writel(0x0, adp->be + ADBE_BLEND_BYPASS);
> +	writel(0x0, adp->be + ADBE_BLEND_EN4);
> +	drm_crtc_vblank_off(crtc);
> +}
> +
> +static void adp_crtc_atomic_flush(struct drm_crtc *crtc,
> +				  struct drm_atomic_state *state)
> +{
> +	u32 frame_num = 1;
> +	struct adp_drv_private *adp = crtc_to_adp(crtc);
> +	struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
> +	u64 new_size = ALIGN(new_state->mode.hdisplay *
> +			     new_state->mode.vdisplay * 4, PAGE_SIZE);
> +
> +	if (new_size != adp->mask_buf_size) {
> +		if (adp->mask_buf)
> +			dma_free_coherent(crtc->dev->dev, adp->mask_buf_size,
> +					  adp->mask_buf, adp->mask_iova);
> +		adp->mask_buf = NULL;
> +		if (new_size != 0) {
> +			adp->mask_buf = dma_alloc_coherent(crtc->dev->dev, new_size,
> +							   &adp->mask_iova, GFP_KERNEL);
> +			memset(adp->mask_buf, 0xFF, new_size);
> +			writel(adp->mask_iova, adp->be + ADBE_MASK_BUF);
> +		}
> +		adp->mask_buf_size = new_size;
> +	}
> +	writel(ADBE_FIFO_SYNC | frame_num, adp->be + ADBE_FIFO);
> +	//FIXME: use adbe flush interrupt
> +	spin_lock_irq(&crtc->dev->event_lock);
> +	if (crtc->state->event) {
> +		drm_crtc_vblank_get(crtc);
> +		adp->event = crtc->state->event;
> +	}
> +	crtc->state->event = NULL;
> +	spin_unlock_irq(&crtc->dev->event_lock);
> +}
> +
> +static const struct drm_crtc_funcs adp_crtc_funcs = {
> +	.destroy = drm_crtc_cleanup,
> +	.set_config = drm_atomic_helper_set_config,
> +	.page_flip = drm_atomic_helper_page_flip,
> +	.reset = drm_atomic_helper_crtc_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> +	.enable_vblank = adp_crtc_enable_vblank,
> +	.disable_vblank = adp_crtc_disable_vblank,
> +};
> +
> +
> +static const struct drm_crtc_helper_funcs adp_crtc_helper_funcs = {
> +	.atomic_enable = adp_crtc_atomic_enable,
> +	.atomic_disable = adp_crtc_atomic_disable,
> +	.atomic_flush = adp_crtc_atomic_flush,
> +};
> +
> +static int adp_setup_crtc(struct adp_drv_private *adp)
> +{
> +	struct drm_device *drm = &adp->drm;
> +	struct adp_plane *primary;
> +	int ret;
> +
> +	primary = adp_plane_new(adp, 0);
> +	if (IS_ERR(primary))
> +		return PTR_ERR(primary);
> +
> +	ret = drm_crtc_init_with_planes(drm, &adp->crtc, &primary->base_plane,
> +					NULL, &adp_crtc_funcs, NULL);
> +	if (ret)
> +		return ret;
> +
> +	drm_crtc_helper_add(&adp->crtc, &adp_crtc_helper_funcs);
> +	return 0;
> +}
> +
> +static int adp_get_modes(struct drm_connector *connector)
> +{
> +	struct adp_drv_private *adp = conn_to_adp(connector);
> +	struct drm_display_mode *mode;
> +	u32 size;
> +
> +	size = readl(adp->fe + ADP_SCREEN_SIZE);
> +	mode = drm_mode_create(connector->dev);
> +
> +	mode->vdisplay = FIELD_GET(ADP_SCREEN_VSIZE, size);
> +	mode->hdisplay = FIELD_GET(ADP_SCREEN_HSIZE, size);
> +	mode->hsync_start = mode->hdisplay + 8;
> +	mode->hsync_end = mode->hsync_start + 80;
> +	mode->htotal = mode->hsync_end + 40;
> +	mode->vsync_start = mode->vdisplay + 1;
> +	mode->vsync_end = mode->vsync_start + 15;
> +	mode->vtotal = mode->vsync_end + 6;
> +	mode->clock = (mode->vtotal * mode->htotal * 60) / 1000;
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC;
> +	drm_mode_set_name(mode);
> +	drm_mode_probed_add(connector, mode);
> +	return 1;
> +}

So this controller only supports a single mode ???????

> +
> +static int adp_detect_ctx(struct drm_connector *connector,
> +		   struct drm_modeset_acquire_ctx *ctx,
> +		   bool force)
> +{
> +	connector->display_info.non_desktop = true;
> +	drm_object_property_set_value(&connector->base,
> +				      connector->dev->mode_config.non_desktop_property,
> +				      connector->display_info.non_desktop);
> +	return connector_status_connected;
> +}
> +
> +static const struct drm_connector_funcs adp_connector_funcs = {
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = drm_connector_cleanup,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static const struct drm_connector_helper_funcs adp_connector_helper_funcs = {
> +	.get_modes = adp_get_modes,
> +	.detect_ctx = adp_detect_ctx,
> +};
> +
> +static const struct drm_mode_config_funcs adp_mode_config_funcs = {
> +	.fb_create = drm_gem_fb_create_with_dirty,
> +	.atomic_check = drm_atomic_helper_check,
> +	.atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static int adp_setup_mode_config(struct adp_drv_private *adp)
> +{
> +	struct drm_device *drm = &adp->drm;
> +	int ret;
> +	u32 size;
> +
> +	ret = drmm_mode_config_init(drm);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * Query screen size restrict the frame buffer size to the screen size
> +	 * aligned to the next multiple of 64. This is not necessary but can be
> +	 * used as simple check for non-desktop devices.
> +	 * Xorg's modesetting driver does not care about the connector
> +	 * "non-desktop" property. The max frame buffer width or height can be
> +	 * easily checked and a device can be reject if the max width/height is
> +	 * smaller than 120 for example.
> +	 * Any touchbar daemon is not limited by this small framebuffer size.
> +	 */
> +	size = readl(adp->fe + ADP_SCREEN_SIZE);
> +
> +	drm->mode_config.min_width = 32;
> +	drm->mode_config.min_height = 32;
> +	drm->mode_config.max_width = ALIGN(FIELD_GET(ADP_SCREEN_HSIZE, size), 64);
> +	drm->mode_config.max_height = ALIGN(FIELD_GET(ADP_SCREEN_VSIZE, size), 64);
> +	drm->mode_config.preferred_depth = 24;
> +	drm->mode_config.prefer_shadow = 0;
> +	drm->mode_config.funcs = &adp_mode_config_funcs;
> +
> +	ret = adp_setup_crtc(adp);
> +	if (ret) {
> +		drm_err(drm, "failed to create crtc");
> +		return ret;
> +	}
> +
> +	adp->encoder.possible_crtcs = ALL_CRTCS;
> +	ret = drm_simple_encoder_init(drm, &adp->encoder, DRM_MODE_ENCODER_DSI);
> +	if (ret) {
> +		drm_err(drm, "failed to init encoder");
> +		return ret;
> +	}
> +	drm_connector_helper_add(&adp->connector,
> +				 &adp_connector_helper_funcs);
> +	ret = drm_connector_init(drm, &adp->connector, &adp_connector_funcs,
> +				 DRM_MODE_CONNECTOR_DSI);
> +	if (ret)
> +		return ret;
> +
> +	drm_connector_attach_encoder(&adp->connector, &adp->encoder);
> +
> +	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
> +	if (ret < 0) {
> +		drm_err(drm, "failed to initialize vblank");
> +		return ret;
> +	}
> +
> +	drm_mode_config_reset(drm);
> +
> +	return 0;
> +}
> +
> +static int adp_parse_of(struct platform_device *pdev, struct adp_drv_private *adp)
> +{
> +	adp->be = devm_platform_ioremap_resource_byname(pdev, "be");
> +	if (IS_ERR(adp->be)) {
> +		dev_err(&pdev->dev, "failed to map display backend mmio");
> +		return PTR_ERR(adp->be);
> +	}
> +
> +	adp->fe = devm_platform_ioremap_resource_byname(pdev, "fe");
> +	if (IS_ERR(adp->fe)) {
> +		dev_err(&pdev->dev, "failed to map display pipe mmio");
> +		return PTR_ERR(adp->fe);
> +	}
> +
> +	adp->mipi = devm_platform_ioremap_resource_byname(pdev, "mipi");
> +	if (IS_ERR(adp->mipi)) {
> +		dev_err(&pdev->dev, "failed to map mipi mmio");
> +		return PTR_ERR(adp->mipi);
> +	}
> +
> +	adp->be_irq = platform_get_irq_byname(pdev, "be");
> +	if (adp->be_irq < 0) {
> +		dev_err(&pdev->dev, "failed to find be irq");
> +		return adp->be_irq;
> +	}
> +
> +	adp->fe_irq = platform_get_irq_byname(pdev, "fe");
> +	if (adp->fe_irq < 0) {
> +		dev_err(&pdev->dev, "failed to find fe irq");
> +		return adp->fe_irq;
> +	}
> +	return 0;
> +}
> +
> +
> +static int adp_dsi_gen_pkt_hdr_write(struct adp_drv_private *adp, u32 hdr_val)
> +{
> +	int ret;
> +	u32 val, mask;
> +
> +	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
> +				 val, !(val & GEN_CMD_FULL), 1000,
> +				 CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret) {
> +		dev_err(adp->drm.dev, "failed to get available command FIFO\n");
> +		return ret;
> +	}
> +
> +	writel(hdr_val, adp->mipi + DSI_GEN_HDR);
> +
> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
> +	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
> +				 val, (val & mask) == mask,
> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret) {
> +		dev_err(adp->drm.dev, "failed to write command FIFO\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int adp_dsi_write(struct adp_drv_private *adp,
> +			 const struct mipi_dsi_packet *packet)
> +{
> +	const u8 *tx_buf = packet->payload;
> +	int len = packet->payload_length, pld_data_bytes = sizeof(u32), ret;
> +	__le32 word;
> +	u32 val;
> +
> +	while (len) {
> +		if (len < pld_data_bytes) {
> +			word = 0;
> +			memcpy(&word, tx_buf, len);
> +			writel(le32_to_cpu(word), adp->mipi + DSI_GEN_PLD_DATA);
> +			len = 0;
> +		} else {
> +			memcpy(&word, tx_buf, pld_data_bytes);
> +			writel(le32_to_cpu(word), adp->mipi + DSI_GEN_PLD_DATA);
> +			tx_buf += pld_data_bytes;
> +			len -= pld_data_bytes;
> +		}
> +
> +		ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
> +					 val, !(val & GEN_PLD_W_FULL), 1000,
> +					 CMD_PKT_STATUS_TIMEOUT_US);
> +		if (ret) {
> +			dev_err(adp->drm.dev,
> +				"failed to get available write payload FIFO\n");
> +			return ret;
> +		}
> +	}
> +
> +	word = 0;
> +	memcpy(&word, packet->header, sizeof(packet->header));
> +	return adp_dsi_gen_pkt_hdr_write(adp, le32_to_cpu(word));
> +}
> +
> +static int adp_dsi_read(struct adp_drv_private *adp,
> +			const struct mipi_dsi_msg *msg)
> +{
> +	int i, j, ret, len = msg->rx_len;
> +	u8 *buf = msg->rx_buf;
> +	u32 val;
> +
> +	/* Wait end of the read operation */
> +	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
> +				 val, !(val & GEN_RD_CMD_BUSY),
> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret) {
> +		dev_err(adp->drm.dev, "Timeout during read operation\n");
> +		return ret;
> +	}
> +
> +	for (i = 0; i < len; i += 4) {
> +		/* Read fifo must not be empty before all bytes are read */
> +		ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
> +					 val, !(val & GEN_PLD_R_EMPTY),
> +					 1000, CMD_PKT_STATUS_TIMEOUT_US);
> +		if (ret) {
> +			dev_err(adp->drm.dev, "Read payload FIFO is empty\n");
> +			return ret;
> +		}
> +
> +		val = readl(adp->mipi + DSI_GEN_PLD_DATA);
> +		for (j = 0; j < 4 && j + i < len; j++)
> +			buf[i + j] = val >> (8 * j);
> +	}
> +
> +	return ret;
> +}
> +
> +static ssize_t adp_dsi_host_transfer(struct mipi_dsi_host *host,
> +				     const struct mipi_dsi_msg *msg)
> +{
> +	struct adp_drv_private *adp = mipi_to_adp(host);
> +	struct mipi_dsi_packet packet;
> +	int ret, nb_bytes;
> +
> +	ret = mipi_dsi_create_packet(&packet, msg);
> +	if (ret) {
> +		dev_err(adp->drm.dev, "failed to create packet: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = adp_dsi_write(adp, &packet);
> +	if (ret)
> +		return ret;
> +
> +	if (msg->rx_buf && msg->rx_len) {
> +		ret = adp_dsi_read(adp, msg);
> +		if (ret)
> +			return ret;
> +		nb_bytes = msg->rx_len;
> +	} else {
> +		nb_bytes = packet.size;
> +	}
> +
> +	return nb_bytes;
> +}
> +
> +static int adp_dsi_host_attach(struct mipi_dsi_host *host,
> +			       struct mipi_dsi_device *dev)
> +{
> +	return 0;
> +}
> +
> +static int adp_dsi_host_detach(struct mipi_dsi_host *host,
> +			       struct mipi_dsi_device *dev)
> +{
> +	return 0;
> +}
> +
> +static const struct mipi_dsi_host_ops adp_dsi_host_ops = {
> +	.transfer = adp_dsi_host_transfer,
> +	.attach = adp_dsi_host_attach,
> +	.detach = adp_dsi_host_detach,
> +};
> +
> +static irqreturn_t adp_fe_irq(int irq, void *arg)
> +{
> +	struct adp_drv_private *adp = (struct adp_drv_private *)arg;
> +	u32 int_status;
> +	u32 int_ctl;
> +
> +	spin_lock(&adp->irq_lock);
> +
> +	int_status = readl(adp->fe + ADP_INT_STATUS);
> +	if (int_status & ADP_INT_STATUS_VBLANK) {
> +		drm_crtc_handle_vblank(&adp->crtc);
> +		spin_lock(&adp->crtc.dev->event_lock);
> +		if (adp->event) {
> +			int_ctl = readl(adp->fe + ADP_CTRL);
> +			if ((int_ctl & 0xF00) == 0x600) {
> +				drm_crtc_send_vblank_event(&adp->crtc, adp->event);
> +				adp->event = NULL;
> +				drm_crtc_vblank_put(&adp->crtc);
> +			}
> +		}
> +		spin_unlock(&adp->crtc.dev->event_lock);
> +	}
> +
> +	writel(int_status, adp->fe + ADP_INT_STATUS);
> +
> +	spin_unlock(&adp->irq_lock);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int adp_probe(struct platform_device *pdev)
> +{
> +	struct adp_drv_private *adp;
> +	int err;
> +
> +	adp = devm_drm_dev_alloc(&pdev->dev, &adp_driver, struct adp_drv_private, drm);
> +	if (IS_ERR(adp))
> +		return PTR_ERR(adp);
> +
> +	spin_lock_init(&adp->irq_lock);
> +
> +	dev_set_drvdata(&pdev->dev, &adp->drm);
> +
> +	err = adp_parse_of(pdev, adp);
> +	if (err < 0)
> +		return err;
> +
> +	adp->dsi.dev = &pdev->dev;
> +	adp->dsi.ops = &adp_dsi_host_ops;
> +	err = mipi_dsi_host_register(&adp->dsi);
> +	if (err < 0)
> +		return err;
> +
> +	adp_disable_vblank(adp);
> +	writel(ADP_CTRL_FIFO_ON | ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
> +
> +	err = adp_setup_mode_config(adp);
> +	if (err < 0)
> +		return err;
> +
> +	err = devm_request_irq(&pdev->dev, adp->fe_irq, adp_fe_irq, 0,
> +			       "adp-fe", adp);
> +	if (err)
> +		return err;
> +
> +	err = drm_dev_register(&adp->drm, 0);
> +	if (err)
> +		return err;
> +	return 0;
> +}
> +
> +static void adp_remove(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct drm_device *drm = dev_get_drvdata(dev);
> +	struct adp_drv_private *adp = to_adp(drm);
> +
> +	adp_disable_vblank(adp);
> +	mipi_dsi_host_unregister(&adp->dsi);
> +	drm_dev_unregister(drm);
> +	dev_set_drvdata(dev, NULL);
> +	drm_atomic_helper_shutdown(drm);
> +}
> +
> +static const struct of_device_id adp_of_match[] = {
> +	{ .compatible = "apple,h7-display-pipe", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, adp_of_match);
> +
> +static struct platform_driver adp_platform_driver = {
> +	.driver = {
> +		.name = "adp",
> +		.of_match_table = adp_of_match,
> +	},
> +	.probe = adp_probe,
> +	.remove = adp_remove,
> +};
> +
> +module_platform_driver(adp_platform_driver);
> +
> +MODULE_DESCRIPTION("Apple Display Pipe DRM driver");
> +MODULE_LICENSE("GPL");
>
Jani Nikula Nov. 25, 2024, 9:04 a.m. UTC | #2
On Sun, 24 Nov 2024, Sasha Finkelstein via B4 Relay <devnull+fnkl.kernel.gmail.com@kernel.org> wrote:
> diff --git a/drivers/gpu/drm/adp/adp_drv.c b/drivers/gpu/drm/adp/adp_drv.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..36510194e18161ef6514885c764b2e7085c587e5
> --- /dev/null
> +++ b/drivers/gpu/drm/adp/adp_drv.c
> @@ -0,0 +1,814 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/anon_inodes.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/file.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +#include <asm/current.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_damage_helper.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drm_fb_dma_helper.h>
> +#include <drm/drm_file.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_gem_atomic_helper.h>
> +#include <drm/drm_gem_dma_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_simple_kms_helper.h>
> +#include <drm/drm_vblank.h>

Please only include what you use.

BR,
Jani.
Alyssa Ross Nov. 25, 2024, 10:59 a.m. UTC | #3
This still has the bug that I originally reported at:
https://github.com/AsahiLinux/linux/issues/258

On Sun, Nov 24, 2024 at 11:29:25PM +0100, Sasha Finkelstein via B4 Relay wrote:
> +static int adp_probe(struct platform_device *pdev)
> +{
> +	struct adp_drv_private *adp;
> +	int err;
> +
> +	adp = devm_drm_dev_alloc(&pdev->dev, &adp_driver, struct adp_drv_private, drm);
> +	if (IS_ERR(adp))
> +		return PTR_ERR(adp);

Here a child device of pdev->dev is created.  It is not a MIPI DSI
device.

> +
> +	spin_lock_init(&adp->irq_lock);
> +
> +	dev_set_drvdata(&pdev->dev, &adp->drm);
> +
> +	err = adp_parse_of(pdev, adp);
> +	if (err < 0)
> +		return err;
> +
> +	adp->dsi.dev = &pdev->dev;
> +	adp->dsi.ops = &adp_dsi_host_ops;
> +	err = mipi_dsi_host_register(&adp->dsi);

Here a MIPI DSI host is registered, with its device set to pdev->dev.
It is expected that the child devices of a DSI host device are all MIPI
DSI devices — see mipi_dsi_host_unregister() and
mipi_dsi_remove_device_fn().

This means that, when mipi_dsi_host_unregister() is called, which it
will be as part of unloading adpdrm, it will try to find the MIPI DSI
device for adp using container_of() (via to_mipi_dsi_device()), but
there isn't one, so it interprets some other memory as a struct
mipi_dsi_device.

For me, this causes a null pointer dereference.

> +	if (err < 0)
> +		return err;
> +
> +	adp_disable_vblank(adp);
> +	writel(ADP_CTRL_FIFO_ON | ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
> +
> +	err = adp_setup_mode_config(adp);
> +	if (err < 0)
> +		return err;
> +
> +	err = devm_request_irq(&pdev->dev, adp->fe_irq, adp_fe_irq, 0,
> +			       "adp-fe", adp);
> +	if (err)
> +		return err;
> +
> +	err = drm_dev_register(&adp->drm, 0);
> +	if (err)
> +		return err;
> +	return 0;
> +}
Sasha Finkelstein Nov. 25, 2024, 11:24 a.m. UTC | #4
On Mon, 25 Nov 2024 at 09:50, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> So this controller only supports a single mode ???????
>
Most likely. On all devices it is connected to a single built-in display.

Ack on all other changes, will be fixed for v2.
Neil Armstrong Nov. 25, 2024, 12:57 p.m. UTC | #5
On 25/11/2024 12:24, Sasha Finkelstein wrote:
> On Mon, 25 Nov 2024 at 09:50, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>>
>> So this controller only supports a single mode ???????
>>
> Most likely. On all devices it is connected to a single built-in display.
> 
> Ack on all other changes, will be fixed for v2.

OK, so instead make the panel driver return this single mode
and from the display driver just filter out anything that's
not ADP_SCREEN_VSIZE & ADP_SCREEN_HSIZE.

Neil
Sasha Finkelstein Nov. 25, 2024, 1:14 p.m. UTC | #6
On Mon, 25 Nov 2024 at 13:57, <neil.armstrong@linaro.org> wrote:
>
> On 25/11/2024 12:24, Sasha Finkelstein wrote:
> > On Mon, 25 Nov 2024 at 09:50, Neil Armstrong <neil.armstrong@linaro.org> wrote:
> >>
> >> So this controller only supports a single mode ???????
> >>
> > Most likely. On all devices it is connected to a single built-in display.
> >
> > Ack on all other changes, will be fixed for v2.
>
> OK, so instead make the panel driver return this single mode
> and from the display driver just filter out anything that's
> not ADP_SCREEN_VSIZE & ADP_SCREEN_HSIZE.

Not sure i follow, you want the mode hardcoded in the panel driver
and the controller driver to fetch and return that?
Neil Armstrong Nov. 25, 2024, 1:16 p.m. UTC | #7
On 25/11/2024 14:14, Sasha Finkelstein wrote:
> On Mon, 25 Nov 2024 at 13:57, <neil.armstrong@linaro.org> wrote:
>>
>> On 25/11/2024 12:24, Sasha Finkelstein wrote:
>>> On Mon, 25 Nov 2024 at 09:50, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>>>>
>>>> So this controller only supports a single mode ???????
>>>>
>>> Most likely. On all devices it is connected to a single built-in display.
>>>
>>> Ack on all other changes, will be fixed for v2.
>>
>> OK, so instead make the panel driver return this single mode
>> and from the display driver just filter out anything that's
>> not ADP_SCREEN_VSIZE & ADP_SCREEN_HSIZE.
> 
> Not sure i follow, you want the mode hardcoded in the panel driver
> and the controller driver to fetch and return that?

Yes, like a classic panel driver.

Neil
Hector Martin Nov. 25, 2024, 2:24 p.m. UTC | #8
On 2024/11/25 20:24, Sasha Finkelstein wrote:
> On Mon, 25 Nov 2024 at 09:50, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>>
>> So this controller only supports a single mode ???????
>>
> Most likely. On all devices it is connected to a single built-in display.

More specifically, the controller obviously supports multiple modes but
it is pre-initialized by the bootloader for the single hardwired
display's only mode. So as far as the driver is concerned, there is a
single possible mode, and there's no point in trying to be more generic
if there is no hardware that would use that.

In general, it is not possible/practical to be generic for reverse
engineered hardware with no specs documenting how to drive it
generically. You just can't know how to implement the options that are
never used in practice. I spent a lot of time on exceptions to this rule
for the GPIO and SPI controllers, and that's not going to happen for
more complex hardware like MIPI DSI.

- Hector
Maxime Ripard Nov. 25, 2024, 3:28 p.m. UTC | #9
On Mon, Nov 25, 2024 at 11:24:25PM +0900, Hector Martin wrote:
> 
> 
> On 2024/11/25 20:24, Sasha Finkelstein wrote:
> > On Mon, 25 Nov 2024 at 09:50, Neil Armstrong <neil.armstrong@linaro.org> wrote:
> >>
> >> So this controller only supports a single mode ???????
> >>
> > Most likely. On all devices it is connected to a single built-in display.
> 
> More specifically, the controller obviously supports multiple modes but
> it is pre-initialized by the bootloader for the single hardwired
> display's only mode. So as far as the driver is concerned, there is a
> single possible mode, and there's no point in trying to be more generic
> if there is no hardware that would use that.

It's not only about being generic, it's also about fitting nicely in the
usual abstractions. You could also always register a single panel, with
a single timing set, and the driver would never see anything else. And
still fall within the usual pattern.

> In general, it is not possible/practical to be generic for reverse
> engineered hardware with no specs documenting how to drive it
> generically. You just can't know how to implement the options that are
> never used in practice. I spent a lot of time on exceptions to this
> rule for the GPIO and SPI controllers, and that's not going to happen
> for more complex hardware like MIPI DSI.

How is GPIO or SPI even remotely related to that discussion? We are
different maintainers, with different concerns, and different things to
care about.

Also, "My way or the highway" is never a great discussion opener.

Maxime
Neil Armstrong Nov. 25, 2024, 3:37 p.m. UTC | #10
Hi Hector,

On 25/11/2024 15:24, Hector Martin wrote:
> 
> 
> On 2024/11/25 20:24, Sasha Finkelstein wrote:
>> On Mon, 25 Nov 2024 at 09:50, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>>>
>>> So this controller only supports a single mode ???????
>>>
>> Most likely. On all devices it is connected to a single built-in display.
> 
> More specifically, the controller obviously supports multiple modes but
> it is pre-initialized by the bootloader for the single hardwired
> display's only mode. So as far as the driver is concerned, there is a
> single possible mode, and there's no point in trying to be more generic
> if there is no hardware that would use that.

I totally got the point, I just asked to slightly change the design to fit
the overall DRM/DSI/Panel architecture.

> 
> In general, it is not possible/practical to be generic for reverse
> engineered hardware with no specs documenting how to drive it
> generically. You just can't know how to implement the options that are
> never used in practice. I spent a lot of time on exceptions to this rule
> for the GPIO and SPI controllers, and that's not going to happen for
> more complex hardware like MIPI DSI.

I'm fine with the overall actual design since it's a special usecase
for a special display present on only a few SKUs.

Nevertheless, as Maxime expressed, you should still try to fit nicely
on the abstractions, or change the abstractions.

Neil

> 
> - Hector
>
Hector Martin Nov. 25, 2024, 3:55 p.m. UTC | #11
On November 25, 2024 4:28:00 PM GMT+01:00, Maxime Ripard <mripard@kernel.org> wrote:
>On Mon, Nov 25, 2024 at 11:24:25PM +0900, Hector Martin wrote:
>> 
>> 
>> On 2024/11/25 20:24, Sasha Finkelstein wrote:
>> > On Mon, 25 Nov 2024 at 09:50, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>> >>
>> >> So this controller only supports a single mode ???????
>> >>
>> > Most likely. On all devices it is connected to a single built-in display.
>> 
>> More specifically, the controller obviously supports multiple modes but
>> it is pre-initialized by the bootloader for the single hardwired
>> display's only mode. So as far as the driver is concerned, there is a
>> single possible mode, and there's no point in trying to be more generic
>> if there is no hardware that would use that.
>
>It's not only about being generic, it's also about fitting nicely in the
>usual abstractions. You could also always register a single panel, with
>a single timing set, and the driver would never see anything else. And
>still fall within the usual pattern.
>
>> In general, it is not possible/practical to be generic for reverse
>> engineered hardware with no specs documenting how to drive it
>> generically. You just can't know how to implement the options that are
>> never used in practice. I spent a lot of time on exceptions to this
>> rule for the GPIO and SPI controllers, and that's not going to happen
>> for more complex hardware like MIPI DSI.
>
>How is GPIO or SPI even remotely related to that discussion? We are
>different maintainers, with different concerns, and different things to
>care about.
>
>Also, "My way or the highway" is never a great discussion opener.

This was not an attempt to push back on the review feedback at all. I was just trying to add context about *why* the controller will never be used with nor support more than a single mode, not argue about how that should be implemented. Sorry if it came across as otherwise.

GPIO and SPI are relevant not because of anything related to the kernel, but because I was able to reverse engineer the generic features of those controllers quite comprehensively by literally probing a GPIO routed to an external USB-C port with a custom test bench and an oscilloscope (for GPIO) and by using the GPIO registers along with a bespoke bare-metal test platform as a "software" logic analyzer to inspect the signals generated as I twiddled register bits (for SPI). I'd love to have all hardware comprehensively documented like that (I did GPIO and SPI because I wanted to, not because any maintainer asked for it), but as you might imagine, this kind of deep hardware RE doesn't scale and isn't practical for anything more complex, and I was just trying to convey that fact.

(Sending from mobile, apologies for the likely dodgy line wrap)


-- Hector
diff mbox series

Patch

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 5504721007cc190e7d768d42aa9633baa0115f5e..acd1111f1773ef044c306c62ad9f850996259ef1 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -499,6 +499,8 @@  source "drivers/gpu/drm/mcde/Kconfig"
 
 source "drivers/gpu/drm/tidss/Kconfig"
 
+source "drivers/gpu/drm/adp/Kconfig"
+
 source "drivers/gpu/drm/xlnx/Kconfig"
 
 source "drivers/gpu/drm/gud/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 463afad1b5ca6275e61223adc8ca036c3d4d6b03..acd8d8943ef2bf85c80db7c218c59a7ec2df56da 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -213,6 +213,7 @@  obj-y			+= mxsfb/
 obj-y			+= tiny/
 obj-$(CONFIG_DRM_PL111) += pl111/
 obj-$(CONFIG_DRM_TVE200) += tve200/
+obj-$(CONFIG_DRM_ADP) += adp/
 obj-$(CONFIG_DRM_XEN) += xen/
 obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
 obj-$(CONFIG_DRM_LIMA)  += lima/
diff --git a/drivers/gpu/drm/adp/Kconfig b/drivers/gpu/drm/adp/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..3c570aeb14700611edd7e2738367090ebb30c346
--- /dev/null
+++ b/drivers/gpu/drm/adp/Kconfig
@@ -0,0 +1,14 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR MIT
+config DRM_ADP
+	tristate "DRM Support for pre-DCP Apple display controllers"
+	depends on DRM && OF && ARM64
+	depends on ARCH_APPLE || COMPILE_TEST
+	select DRM_KMS_HELPER
+	select DRM_KMS_DMA_HELPER
+	select DRM_GEM_DMA_HELPER
+	select VIDEOMODE_HELPERS
+	select DRM_MIPI_DSI
+	help
+	  Chose this option if you have an Apple Arm laptop with a touchbar.
+
+	  If M is selected, this module will be called adpdrm.
diff --git a/drivers/gpu/drm/adp/Makefile b/drivers/gpu/drm/adp/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..28a5d4b4a267f3e2abe9f0ea9e11fae51ca18b88
--- /dev/null
+++ b/drivers/gpu/drm/adp/Makefile
@@ -0,0 +1,5 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+adpdrm-y := adp_drv.o
+obj-$(CONFIG_DRM_ADP) += adpdrm.o
+obj-$(CONFIG_DRM_ADP) += panel-summit.o
diff --git a/drivers/gpu/drm/adp/adp_drv.c b/drivers/gpu/drm/adp/adp_drv.c
new file mode 100644
index 0000000000000000000000000000000000000000..36510194e18161ef6514885c764b2e7085c587e5
--- /dev/null
+++ b/drivers/gpu/drm/adp/adp_drv.c
@@ -0,0 +1,814 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/anon_inodes.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/file.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/current.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_file.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <drm/drm_vblank.h>
+
+#define ADP_INT_STATUS 0x34
+#define ADP_INT_STATUS_INT_MASK 0x7
+#define ADP_INT_STATUS_VBLANK 0x1
+#define ADP_CTRL 0x100
+#define ADP_CTRL_VBLANK_ON 0x12
+#define ADP_CTRL_FIFO_ON 0x601
+#define ADP_SCREEN_SIZE 0x0c
+#define ADP_SCREEN_HSIZE GENMASK(15, 0)
+#define ADP_SCREEN_VSIZE GENMASK(31, 16)
+
+#define ADBE_FIFO 0x10c0
+#define ADBE_FIFO_SYNC 0xc0000000
+
+#define ADBE_BLEND_BYPASS 0x2020
+#define ADBE_BLEND_EN1 0x2028
+#define ADBE_BLEND_EN2 0x2074
+#define ADBE_BLEND_EN3 0x202c
+#define ADBE_BLEND_EN4 0x2034
+#define ADBE_MASK_BUF 0x2200
+
+#define ADBE_SRC_START 0x4040
+#define ADBE_SRC_SIZE 0x4048
+#define ADBE_DST_START 0x4050
+#define ADBE_DST_SIZE 0x4054
+#define ADBE_STRIDE 0x4038
+#define ADBE_FB_BASE 0x4030
+
+#define ADBE_LAYER_EN1 0x4020
+#define ADBE_LAYER_EN2 0x4068
+#define ADBE_LAYER_EN3 0x40b4
+#define ADBE_LAYER_EN4 0x40f4
+#define ADBE_SCALE_CTL 0x40ac
+#define ADBE_SCALE_CTL_BYPASS 0x100000
+
+#define ADBE_LAYER_CTL 0x1038
+#define ADBE_LAYER_CTL_ENABLE 0x10000
+
+#define ADBE_PIX_FMT 0x402c
+#define ADBE_PIX_FMT_XRGB32 0x53e4001
+
+#define DSI_GEN_HDR 0x6c
+#define DSI_GEN_PLD_DATA 0x70
+
+#define DSI_CMD_PKT_STATUS 0x74
+
+#define GEN_PLD_R_EMPTY BIT(4)
+#define GEN_PLD_W_FULL BIT(3)
+#define GEN_PLD_W_EMPTY BIT(2)
+#define GEN_CMD_FULL BIT(1)
+#define GEN_CMD_EMPTY BIT(0)
+#define GEN_RD_CMD_BUSY BIT(6)
+#define CMD_PKT_STATUS_TIMEOUT_US 20000
+
+static int adp_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * The modesetting driver does not check the non-desktop connector
+	 * property and keeps the device open and locked. If the touchbar daemon
+	 * opens the device first modesetting breaks the whole X session.
+	 * Simply refuse to open the device for X11 server processes as
+	 * workaround.
+	 */
+	if (current->comm[0] == 'X')
+		return -EBUSY;
+
+	return drm_open(inode, filp);
+}
+
+static const struct file_operations adp_fops = {
+	.owner          = THIS_MODULE,
+	.open           = adp_open,
+	.release        = drm_release,
+	.unlocked_ioctl = drm_ioctl,
+	.compat_ioctl   = drm_compat_ioctl,
+	.poll           = drm_poll,
+	.read           = drm_read,
+	.llseek         = noop_llseek,
+	.mmap           = drm_gem_mmap,
+	.fop_flags      = FOP_UNSIGNED_OFFSET,
+	DRM_GEM_DMA_UNMAPPED_AREA_FOPS
+};
+
+static int adp_drm_gem_dumb_create(struct drm_file *file_priv,
+					struct drm_device *drm,
+					struct drm_mode_create_dumb *args)
+{
+	args->height = ALIGN(args->height, 64);
+	args->size = args->pitch * args->height;
+
+	return drm_gem_dma_dumb_create_internal(file_priv, drm, args);
+}
+
+static const struct drm_driver adp_driver = {
+	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.fops = &adp_fops,
+	DRM_GEM_DMA_DRIVER_OPS_VMAP_WITH_DUMB_CREATE(adp_drm_gem_dumb_create),
+	.name = "adp",
+	.desc = "Apple Display Pipe DRM Driver",
+	.date = "20230412",
+	.major = 0,
+	.minor = 1,
+};
+
+struct adp_drv_private {
+	struct drm_device drm;
+	struct drm_crtc crtc;
+	struct drm_encoder encoder;
+	struct drm_connector connector;
+	struct mipi_dsi_host dsi;
+	void __iomem *be;
+	void __iomem *fe;
+	void __iomem *mipi;
+	u32 *mask_buf;
+	u64 mask_buf_size;
+	dma_addr_t mask_iova;
+	int be_irq;
+	int fe_irq;
+	spinlock_t irq_lock;
+	struct drm_pending_vblank_event *event;
+};
+
+struct adp_plane {
+	struct drm_plane base_plane;
+	u8 id;
+};
+
+#define to_adp(x) container_of(x, struct adp_drv_private, drm)
+#define crtc_to_adp(x) container_of(x, struct adp_drv_private, crtc)
+#define conn_to_adp(x) container_of(x, struct adp_drv_private, connector)
+#define mipi_to_adp(x) container_of(x, struct adp_drv_private, dsi)
+
+static int adp_plane_atomic_check(struct drm_plane *plane,
+				    struct drm_atomic_state *state)
+{
+	struct drm_plane_state *new_plane_state;
+	struct drm_crtc_state *crtc_state;
+
+	new_plane_state = drm_atomic_get_new_plane_state(state, plane);
+
+	if (!new_plane_state->crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_crtc_state(state, new_plane_state->crtc);
+	if (IS_ERR(crtc_state))
+		return PTR_ERR(crtc_state);
+	return drm_atomic_helper_check_plane_state(new_plane_state,
+						   crtc_state,
+						   DRM_PLANE_NO_SCALING,
+						   DRM_PLANE_NO_SCALING,
+						   true, true);
+}
+
+static void adp_plane_atomic_update(struct drm_plane *plane,
+				    struct drm_atomic_state *state)
+{
+	struct adp_drv_private *adp;
+	struct drm_rect src_rect;
+	struct drm_gem_dma_object *obj;
+	struct drm_framebuffer *fb;
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
+	u32 src_pos, src_size, dst_pos, dst_size;
+
+	if (!plane || !new_state)
+		return;
+
+	fb = new_state->fb;
+	if (!fb)
+		return;
+	adp = to_adp(plane->dev);
+
+	drm_rect_fp_to_int(&src_rect, &new_state->src);
+	src_pos = src_rect.x1 << 16 | src_rect.y1;
+	dst_pos = new_state->dst.x1 << 16 | new_state->dst.y1;
+	src_size = drm_rect_width(&src_rect) << 16 | drm_rect_height(&src_rect);
+	dst_size = drm_rect_width(&new_state->dst) << 16 |
+		drm_rect_height(&new_state->dst);
+	writel(src_pos, adp->be + ADBE_SRC_START);
+	writel(src_size, adp->be + ADBE_SRC_SIZE);
+	writel(dst_pos, adp->be + ADBE_DST_START);
+	writel(dst_size, adp->be + ADBE_DST_SIZE);
+	writel(fb->pitches[0], adp->be + ADBE_STRIDE);
+	obj = drm_fb_dma_get_gem_obj(fb, 0);
+	if (obj)
+		writel(obj->dma_addr + fb->offsets[0], adp->be + ADBE_FB_BASE);
+
+	writel(0x1, adp->be + ADBE_LAYER_EN1);
+	writel(0x1, adp->be + ADBE_LAYER_EN2);
+	writel(0x1, adp->be + ADBE_LAYER_EN3);
+	writel(0x1, adp->be + ADBE_LAYER_EN4);
+	writel(ADBE_SCALE_CTL_BYPASS, adp->be + ADBE_SCALE_CTL);
+	writel(ADBE_LAYER_CTL_ENABLE | 0x1, adp->be + ADBE_LAYER_CTL);
+	writel(ADBE_PIX_FMT_XRGB32, adp->be + ADBE_PIX_FMT);
+
+}
+
+static void adp_plane_atomic_disable(struct drm_plane *plane,
+				     struct drm_atomic_state *state)
+{
+	struct adp_drv_private *adp = to_adp(plane->dev);
+
+	writel(0x0, adp->be + ADBE_LAYER_EN1);
+	writel(0x0, adp->be + ADBE_LAYER_EN2);
+	writel(0x0, adp->be + ADBE_LAYER_EN3);
+	writel(0x0, adp->be + ADBE_LAYER_EN4);
+	writel(ADBE_LAYER_CTL_ENABLE, adp->be + ADBE_LAYER_CTL);
+}
+
+static const struct drm_plane_helper_funcs adp_plane_helper_funcs = {
+	.atomic_check = adp_plane_atomic_check,
+	.atomic_update = adp_plane_atomic_update,
+	.atomic_disable = adp_plane_atomic_disable,
+	DRM_GEM_SHADOW_PLANE_HELPER_FUNCS
+};
+
+static const struct drm_plane_funcs adp_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	DRM_GEM_SHADOW_PLANE_FUNCS
+};
+
+static const u32 plane_formats[] = {
+	DRM_FORMAT_XRGB8888,
+};
+
+#define ALL_CRTCS 1
+
+static struct adp_plane *adp_plane_new(struct adp_drv_private *adp, u8 id)
+{
+	struct drm_device *drm = &adp->drm;
+	struct adp_plane *plane;
+	enum drm_plane_type plane_type;
+
+	plane_type = (id == 0) ? DRM_PLANE_TYPE_PRIMARY :
+		DRM_PLANE_TYPE_OVERLAY;
+
+	plane = drmm_universal_plane_alloc(drm, struct adp_plane, base_plane,
+					   ALL_CRTCS, &adp_plane_funcs,
+					   plane_formats, ARRAY_SIZE(plane_formats),
+					   NULL, plane_type, "plane %d", id);
+	if (!plane) {
+		drm_err(drm, "failed to allocate plane");
+		return ERR_PTR(-ENOMEM);
+	}
+	plane->id = id;
+
+	drm_plane_helper_add(&plane->base_plane, &adp_plane_helper_funcs);
+	return plane;
+}
+
+static void adp_enable_vblank(struct adp_drv_private *adp)
+{
+	u32 cur_ctrl;
+
+	writel(ADP_INT_STATUS_INT_MASK, adp->fe + ADP_INT_STATUS);
+
+	cur_ctrl = readl(adp->fe + ADP_CTRL);
+	writel(cur_ctrl | ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
+}
+
+static int adp_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct adp_drv_private *adp = to_adp(dev);
+
+	adp_enable_vblank(adp);
+
+	return 0;
+}
+
+static void adp_disable_vblank(struct adp_drv_private *adp)
+{
+	u32 cur_ctrl;
+
+	cur_ctrl = readl(adp->fe + ADP_CTRL);
+	writel(cur_ctrl & ~ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
+	writel(ADP_INT_STATUS_INT_MASK, adp->fe + ADP_INT_STATUS);
+}
+
+static void adp_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct adp_drv_private *adp = to_adp(dev);
+
+	adp_disable_vblank(adp);
+}
+
+
+static void adp_crtc_atomic_enable(struct drm_crtc *crtc,
+				   struct drm_atomic_state *state)
+{
+	struct adp_drv_private *adp = crtc_to_adp(crtc);
+
+	writel(0x1, adp->be + ADBE_BLEND_EN2);
+	writel(0x10, adp->be + ADBE_BLEND_EN1);
+	writel(0x1, adp->be + ADBE_BLEND_EN3);
+	writel(0x1, adp->be + ADBE_BLEND_BYPASS);
+	writel(0x1, adp->be + ADBE_BLEND_EN4);
+}
+
+static void adp_crtc_atomic_disable(struct drm_crtc *crtc,
+				    struct drm_atomic_state *state)
+{
+	struct adp_drv_private *adp = crtc_to_adp(crtc);
+	struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
+
+	drm_atomic_helper_disable_planes_on_crtc(old_state, false);
+
+	writel(0x0, adp->be + ADBE_BLEND_EN2);
+	writel(0x0, adp->be + ADBE_BLEND_EN1);
+	writel(0x0, adp->be + ADBE_BLEND_EN3);
+	writel(0x0, adp->be + ADBE_BLEND_BYPASS);
+	writel(0x0, adp->be + ADBE_BLEND_EN4);
+	drm_crtc_vblank_off(crtc);
+}
+
+static void adp_crtc_atomic_flush(struct drm_crtc *crtc,
+				  struct drm_atomic_state *state)
+{
+	u32 frame_num = 1;
+	struct adp_drv_private *adp = crtc_to_adp(crtc);
+	struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
+	u64 new_size = ALIGN(new_state->mode.hdisplay *
+			     new_state->mode.vdisplay * 4, PAGE_SIZE);
+
+	if (new_size != adp->mask_buf_size) {
+		if (adp->mask_buf)
+			dma_free_coherent(crtc->dev->dev, adp->mask_buf_size,
+					  adp->mask_buf, adp->mask_iova);
+		adp->mask_buf = NULL;
+		if (new_size != 0) {
+			adp->mask_buf = dma_alloc_coherent(crtc->dev->dev, new_size,
+							   &adp->mask_iova, GFP_KERNEL);
+			memset(adp->mask_buf, 0xFF, new_size);
+			writel(adp->mask_iova, adp->be + ADBE_MASK_BUF);
+		}
+		adp->mask_buf_size = new_size;
+	}
+	writel(ADBE_FIFO_SYNC | frame_num, adp->be + ADBE_FIFO);
+	//FIXME: use adbe flush interrupt
+	spin_lock_irq(&crtc->dev->event_lock);
+	if (crtc->state->event) {
+		drm_crtc_vblank_get(crtc);
+		adp->event = crtc->state->event;
+	}
+	crtc->state->event = NULL;
+	spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static const struct drm_crtc_funcs adp_crtc_funcs = {
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+	.enable_vblank = adp_crtc_enable_vblank,
+	.disable_vblank = adp_crtc_disable_vblank,
+};
+
+
+static const struct drm_crtc_helper_funcs adp_crtc_helper_funcs = {
+	.atomic_enable = adp_crtc_atomic_enable,
+	.atomic_disable = adp_crtc_atomic_disable,
+	.atomic_flush = adp_crtc_atomic_flush,
+};
+
+static int adp_setup_crtc(struct adp_drv_private *adp)
+{
+	struct drm_device *drm = &adp->drm;
+	struct adp_plane *primary;
+	int ret;
+
+	primary = adp_plane_new(adp, 0);
+	if (IS_ERR(primary))
+		return PTR_ERR(primary);
+
+	ret = drm_crtc_init_with_planes(drm, &adp->crtc, &primary->base_plane,
+					NULL, &adp_crtc_funcs, NULL);
+	if (ret)
+		return ret;
+
+	drm_crtc_helper_add(&adp->crtc, &adp_crtc_helper_funcs);
+	return 0;
+}
+
+static int adp_get_modes(struct drm_connector *connector)
+{
+	struct adp_drv_private *adp = conn_to_adp(connector);
+	struct drm_display_mode *mode;
+	u32 size;
+
+	size = readl(adp->fe + ADP_SCREEN_SIZE);
+	mode = drm_mode_create(connector->dev);
+
+	mode->vdisplay = FIELD_GET(ADP_SCREEN_VSIZE, size);
+	mode->hdisplay = FIELD_GET(ADP_SCREEN_HSIZE, size);
+	mode->hsync_start = mode->hdisplay + 8;
+	mode->hsync_end = mode->hsync_start + 80;
+	mode->htotal = mode->hsync_end + 40;
+	mode->vsync_start = mode->vdisplay + 1;
+	mode->vsync_end = mode->vsync_start + 15;
+	mode->vtotal = mode->vsync_end + 6;
+	mode->clock = (mode->vtotal * mode->htotal * 60) / 1000;
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC;
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(connector, mode);
+	return 1;
+}
+
+static int adp_detect_ctx(struct drm_connector *connector,
+		   struct drm_modeset_acquire_ctx *ctx,
+		   bool force)
+{
+	connector->display_info.non_desktop = true;
+	drm_object_property_set_value(&connector->base,
+				      connector->dev->mode_config.non_desktop_property,
+				      connector->display_info.non_desktop);
+	return connector_status_connected;
+}
+
+static const struct drm_connector_funcs adp_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs adp_connector_helper_funcs = {
+	.get_modes = adp_get_modes,
+	.detect_ctx = adp_detect_ctx,
+};
+
+static const struct drm_mode_config_funcs adp_mode_config_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static int adp_setup_mode_config(struct adp_drv_private *adp)
+{
+	struct drm_device *drm = &adp->drm;
+	int ret;
+	u32 size;
+
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ret;
+
+	/*
+	 * Query screen size restrict the frame buffer size to the screen size
+	 * aligned to the next multiple of 64. This is not necessary but can be
+	 * used as simple check for non-desktop devices.
+	 * Xorg's modesetting driver does not care about the connector
+	 * "non-desktop" property. The max frame buffer width or height can be
+	 * easily checked and a device can be reject if the max width/height is
+	 * smaller than 120 for example.
+	 * Any touchbar daemon is not limited by this small framebuffer size.
+	 */
+	size = readl(adp->fe + ADP_SCREEN_SIZE);
+
+	drm->mode_config.min_width = 32;
+	drm->mode_config.min_height = 32;
+	drm->mode_config.max_width = ALIGN(FIELD_GET(ADP_SCREEN_HSIZE, size), 64);
+	drm->mode_config.max_height = ALIGN(FIELD_GET(ADP_SCREEN_VSIZE, size), 64);
+	drm->mode_config.preferred_depth = 24;
+	drm->mode_config.prefer_shadow = 0;
+	drm->mode_config.funcs = &adp_mode_config_funcs;
+
+	ret = adp_setup_crtc(adp);
+	if (ret) {
+		drm_err(drm, "failed to create crtc");
+		return ret;
+	}
+
+	adp->encoder.possible_crtcs = ALL_CRTCS;
+	ret = drm_simple_encoder_init(drm, &adp->encoder, DRM_MODE_ENCODER_DSI);
+	if (ret) {
+		drm_err(drm, "failed to init encoder");
+		return ret;
+	}
+	drm_connector_helper_add(&adp->connector,
+				 &adp_connector_helper_funcs);
+	ret = drm_connector_init(drm, &adp->connector, &adp_connector_funcs,
+				 DRM_MODE_CONNECTOR_DSI);
+	if (ret)
+		return ret;
+
+	drm_connector_attach_encoder(&adp->connector, &adp->encoder);
+
+	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+	if (ret < 0) {
+		drm_err(drm, "failed to initialize vblank");
+		return ret;
+	}
+
+	drm_mode_config_reset(drm);
+
+	return 0;
+}
+
+static int adp_parse_of(struct platform_device *pdev, struct adp_drv_private *adp)
+{
+	adp->be = devm_platform_ioremap_resource_byname(pdev, "be");
+	if (IS_ERR(adp->be)) {
+		dev_err(&pdev->dev, "failed to map display backend mmio");
+		return PTR_ERR(adp->be);
+	}
+
+	adp->fe = devm_platform_ioremap_resource_byname(pdev, "fe");
+	if (IS_ERR(adp->fe)) {
+		dev_err(&pdev->dev, "failed to map display pipe mmio");
+		return PTR_ERR(adp->fe);
+	}
+
+	adp->mipi = devm_platform_ioremap_resource_byname(pdev, "mipi");
+	if (IS_ERR(adp->mipi)) {
+		dev_err(&pdev->dev, "failed to map mipi mmio");
+		return PTR_ERR(adp->mipi);
+	}
+
+	adp->be_irq = platform_get_irq_byname(pdev, "be");
+	if (adp->be_irq < 0) {
+		dev_err(&pdev->dev, "failed to find be irq");
+		return adp->be_irq;
+	}
+
+	adp->fe_irq = platform_get_irq_byname(pdev, "fe");
+	if (adp->fe_irq < 0) {
+		dev_err(&pdev->dev, "failed to find fe irq");
+		return adp->fe_irq;
+	}
+	return 0;
+}
+
+
+static int adp_dsi_gen_pkt_hdr_write(struct adp_drv_private *adp, u32 hdr_val)
+{
+	int ret;
+	u32 val, mask;
+
+	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_CMD_FULL), 1000,
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(adp->drm.dev, "failed to get available command FIFO\n");
+		return ret;
+	}
+
+	writel(hdr_val, adp->mipi + DSI_GEN_HDR);
+
+	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
+	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+				 val, (val & mask) == mask,
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(adp->drm.dev, "failed to write command FIFO\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int adp_dsi_write(struct adp_drv_private *adp,
+			 const struct mipi_dsi_packet *packet)
+{
+	const u8 *tx_buf = packet->payload;
+	int len = packet->payload_length, pld_data_bytes = sizeof(u32), ret;
+	__le32 word;
+	u32 val;
+
+	while (len) {
+		if (len < pld_data_bytes) {
+			word = 0;
+			memcpy(&word, tx_buf, len);
+			writel(le32_to_cpu(word), adp->mipi + DSI_GEN_PLD_DATA);
+			len = 0;
+		} else {
+			memcpy(&word, tx_buf, pld_data_bytes);
+			writel(le32_to_cpu(word), adp->mipi + DSI_GEN_PLD_DATA);
+			tx_buf += pld_data_bytes;
+			len -= pld_data_bytes;
+		}
+
+		ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_W_FULL), 1000,
+					 CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(adp->drm.dev,
+				"failed to get available write payload FIFO\n");
+			return ret;
+		}
+	}
+
+	word = 0;
+	memcpy(&word, packet->header, sizeof(packet->header));
+	return adp_dsi_gen_pkt_hdr_write(adp, le32_to_cpu(word));
+}
+
+static int adp_dsi_read(struct adp_drv_private *adp,
+			const struct mipi_dsi_msg *msg)
+{
+	int i, j, ret, len = msg->rx_len;
+	u8 *buf = msg->rx_buf;
+	u32 val;
+
+	/* Wait end of the read operation */
+	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_RD_CMD_BUSY),
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(adp->drm.dev, "Timeout during read operation\n");
+		return ret;
+	}
+
+	for (i = 0; i < len; i += 4) {
+		/* Read fifo must not be empty before all bytes are read */
+		ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_R_EMPTY),
+					 1000, CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(adp->drm.dev, "Read payload FIFO is empty\n");
+			return ret;
+		}
+
+		val = readl(adp->mipi + DSI_GEN_PLD_DATA);
+		for (j = 0; j < 4 && j + i < len; j++)
+			buf[i + j] = val >> (8 * j);
+	}
+
+	return ret;
+}
+
+static ssize_t adp_dsi_host_transfer(struct mipi_dsi_host *host,
+				     const struct mipi_dsi_msg *msg)
+{
+	struct adp_drv_private *adp = mipi_to_adp(host);
+	struct mipi_dsi_packet packet;
+	int ret, nb_bytes;
+
+	ret = mipi_dsi_create_packet(&packet, msg);
+	if (ret) {
+		dev_err(adp->drm.dev, "failed to create packet: %d\n", ret);
+		return ret;
+	}
+
+	ret = adp_dsi_write(adp, &packet);
+	if (ret)
+		return ret;
+
+	if (msg->rx_buf && msg->rx_len) {
+		ret = adp_dsi_read(adp, msg);
+		if (ret)
+			return ret;
+		nb_bytes = msg->rx_len;
+	} else {
+		nb_bytes = packet.size;
+	}
+
+	return nb_bytes;
+}
+
+static int adp_dsi_host_attach(struct mipi_dsi_host *host,
+			       struct mipi_dsi_device *dev)
+{
+	return 0;
+}
+
+static int adp_dsi_host_detach(struct mipi_dsi_host *host,
+			       struct mipi_dsi_device *dev)
+{
+	return 0;
+}
+
+static const struct mipi_dsi_host_ops adp_dsi_host_ops = {
+	.transfer = adp_dsi_host_transfer,
+	.attach = adp_dsi_host_attach,
+	.detach = adp_dsi_host_detach,
+};
+
+static irqreturn_t adp_fe_irq(int irq, void *arg)
+{
+	struct adp_drv_private *adp = (struct adp_drv_private *)arg;
+	u32 int_status;
+	u32 int_ctl;
+
+	spin_lock(&adp->irq_lock);
+
+	int_status = readl(adp->fe + ADP_INT_STATUS);
+	if (int_status & ADP_INT_STATUS_VBLANK) {
+		drm_crtc_handle_vblank(&adp->crtc);
+		spin_lock(&adp->crtc.dev->event_lock);
+		if (adp->event) {
+			int_ctl = readl(adp->fe + ADP_CTRL);
+			if ((int_ctl & 0xF00) == 0x600) {
+				drm_crtc_send_vblank_event(&adp->crtc, adp->event);
+				adp->event = NULL;
+				drm_crtc_vblank_put(&adp->crtc);
+			}
+		}
+		spin_unlock(&adp->crtc.dev->event_lock);
+	}
+
+	writel(int_status, adp->fe + ADP_INT_STATUS);
+
+	spin_unlock(&adp->irq_lock);
+
+	return IRQ_HANDLED;
+}
+
+static int adp_probe(struct platform_device *pdev)
+{
+	struct adp_drv_private *adp;
+	int err;
+
+	adp = devm_drm_dev_alloc(&pdev->dev, &adp_driver, struct adp_drv_private, drm);
+	if (IS_ERR(adp))
+		return PTR_ERR(adp);
+
+	spin_lock_init(&adp->irq_lock);
+
+	dev_set_drvdata(&pdev->dev, &adp->drm);
+
+	err = adp_parse_of(pdev, adp);
+	if (err < 0)
+		return err;
+
+	adp->dsi.dev = &pdev->dev;
+	adp->dsi.ops = &adp_dsi_host_ops;
+	err = mipi_dsi_host_register(&adp->dsi);
+	if (err < 0)
+		return err;
+
+	adp_disable_vblank(adp);
+	writel(ADP_CTRL_FIFO_ON | ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
+
+	err = adp_setup_mode_config(adp);
+	if (err < 0)
+		return err;
+
+	err = devm_request_irq(&pdev->dev, adp->fe_irq, adp_fe_irq, 0,
+			       "adp-fe", adp);
+	if (err)
+		return err;
+
+	err = drm_dev_register(&adp->drm, 0);
+	if (err)
+		return err;
+	return 0;
+}
+
+static void adp_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct drm_device *drm = dev_get_drvdata(dev);
+	struct adp_drv_private *adp = to_adp(drm);
+
+	adp_disable_vblank(adp);
+	mipi_dsi_host_unregister(&adp->dsi);
+	drm_dev_unregister(drm);
+	dev_set_drvdata(dev, NULL);
+	drm_atomic_helper_shutdown(drm);
+}
+
+static const struct of_device_id adp_of_match[] = {
+	{ .compatible = "apple,h7-display-pipe", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adp_of_match);
+
+static struct platform_driver adp_platform_driver = {
+	.driver = {
+		.name = "adp",
+		.of_match_table = adp_of_match,
+	},
+	.probe = adp_probe,
+	.remove = adp_remove,
+};
+
+module_platform_driver(adp_platform_driver);
+
+MODULE_DESCRIPTION("Apple Display Pipe DRM driver");
+MODULE_LICENSE("GPL");