Message ID | 20241206152207.37928-3-antoniu.miclaus@analog.com (mailing list archive) |
---|---|
State | Changes Requested |
Headers | show |
Series | [1/3] dt-bindings: iio: adf4371: add differential ref | expand |
On Fri, 6 Dec 2024 17:22:06 +0200 Antoniu Miclaus <antoniu.miclaus@analog.com> wrote: > Add support for the reference doubler. > > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> > --- > drivers/iio/frequency/adf4371.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c > index 55bee06fb42d..dc01f2aafb9a 100644 > --- a/drivers/iio/frequency/adf4371.c > +++ b/drivers/iio/frequency/adf4371.c > @@ -44,6 +44,8 @@ > /* ADF4371_REG22 */ > #define ADF4371_REFIN_MODE_MASK BIT(6) > #define ADF4371_REFIN_MODE(x) FIELD_PREP(ADF4371_REFIN_MODE_MASK, x) > +#define ADF4371_REF_DOUB_MASK BIT(5) > +#define ADF4371_REF_DOUB(x) FIELD_PREP(ADF4371_REF_DOUB_MASK, x)\ > > /* ADF4371_REG24 */ > #define ADF4371_RF_DIV_SEL_MSK GENMASK(6, 4) > @@ -75,6 +77,9 @@ > #define ADF4371_MAX_FREQ_REFIN 600000000UL /* Hz */ > #define ADF4371_MAX_FREQ_REFIN_SE 500000000UL /* Hz */ > > +#define ADF4371_MIN_CLKIN_DOUB_FREQ 10000000ULL /* Hz */ > +#define ADF4371_MAX_CLKIN_DOUB_FREQ 125000000ULL /* Hz */ > + > /* MOD1 is a 24-bit primary modulus with fixed value of 2^25 */ > #define ADF4371_MODULUS1 33554432ULL > /* MOD2 is the programmable, 14-bit auxiliary fractional modulus */ > @@ -480,7 +485,7 @@ static const struct iio_info adf4371_info = { > static int adf4371_setup(struct adf4371_state *st) > { > unsigned int synth_timeout = 2, timeout = 1, vco_alc_timeout = 1; > - unsigned int vco_band_div, tmp; > + unsigned int vco_band_div, tmp, ref_doubler_en = 0; > bool ref_diff_en; > int ret; > > @@ -516,6 +521,10 @@ static int adf4371_setup(struct adf4371_state *st) > (!ref_diff_en && st->clkin_freq > ADF4371_MAX_FREQ_REFIN_SE)) > return -EINVAL; > > + if (st->clkin_freq < ADF4371_MAX_CLKIN_DOUB_FREQ && > + st->clkin_freq > ADF4371_MIN_CLKIN_DOUB_FREQ) > + ref_doubler_en = 1; > + > ret = regmap_update_bits(st->regmap, ADF4371_REG(0x22), > ADF4371_REFIN_MODE_MASK, > ADF4371_REFIN_MODE(ref_diff_en)); > @@ -531,7 +540,8 @@ static int adf4371_setup(struct adf4371_state *st) > */ > do { > st->ref_div_factor++; > - st->fpfd = st->clkin_freq / st->ref_div_factor; > + st->fpfd = (st->clkin_freq * (1 + ref_doubler_en)) / > + (st->ref_div_factor); No need for brackets on the previous line. Otherwise this looks good to me. > } while (st->fpfd > ADF4371_MAX_FREQ_PFD); > > /* Calculate Timeouts */
diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c index 55bee06fb42d..dc01f2aafb9a 100644 --- a/drivers/iio/frequency/adf4371.c +++ b/drivers/iio/frequency/adf4371.c @@ -44,6 +44,8 @@ /* ADF4371_REG22 */ #define ADF4371_REFIN_MODE_MASK BIT(6) #define ADF4371_REFIN_MODE(x) FIELD_PREP(ADF4371_REFIN_MODE_MASK, x) +#define ADF4371_REF_DOUB_MASK BIT(5) +#define ADF4371_REF_DOUB(x) FIELD_PREP(ADF4371_REF_DOUB_MASK, x)\ /* ADF4371_REG24 */ #define ADF4371_RF_DIV_SEL_MSK GENMASK(6, 4) @@ -75,6 +77,9 @@ #define ADF4371_MAX_FREQ_REFIN 600000000UL /* Hz */ #define ADF4371_MAX_FREQ_REFIN_SE 500000000UL /* Hz */ +#define ADF4371_MIN_CLKIN_DOUB_FREQ 10000000ULL /* Hz */ +#define ADF4371_MAX_CLKIN_DOUB_FREQ 125000000ULL /* Hz */ + /* MOD1 is a 24-bit primary modulus with fixed value of 2^25 */ #define ADF4371_MODULUS1 33554432ULL /* MOD2 is the programmable, 14-bit auxiliary fractional modulus */ @@ -480,7 +485,7 @@ static const struct iio_info adf4371_info = { static int adf4371_setup(struct adf4371_state *st) { unsigned int synth_timeout = 2, timeout = 1, vco_alc_timeout = 1; - unsigned int vco_band_div, tmp; + unsigned int vco_band_div, tmp, ref_doubler_en = 0; bool ref_diff_en; int ret; @@ -516,6 +521,10 @@ static int adf4371_setup(struct adf4371_state *st) (!ref_diff_en && st->clkin_freq > ADF4371_MAX_FREQ_REFIN_SE)) return -EINVAL; + if (st->clkin_freq < ADF4371_MAX_CLKIN_DOUB_FREQ && + st->clkin_freq > ADF4371_MIN_CLKIN_DOUB_FREQ) + ref_doubler_en = 1; + ret = regmap_update_bits(st->regmap, ADF4371_REG(0x22), ADF4371_REFIN_MODE_MASK, ADF4371_REFIN_MODE(ref_diff_en)); @@ -531,7 +540,8 @@ static int adf4371_setup(struct adf4371_state *st) */ do { st->ref_div_factor++; - st->fpfd = st->clkin_freq / st->ref_div_factor; + st->fpfd = (st->clkin_freq * (1 + ref_doubler_en)) / + (st->ref_div_factor); } while (st->fpfd > ADF4371_MAX_FREQ_PFD); /* Calculate Timeouts */
Add support for the reference doubler. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> --- drivers/iio/frequency/adf4371.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)