Message ID | 20241210001657.3362-4-W_Armin@gmx.de (mailing list archive) |
---|---|
State | Accepted, archived |
Headers | show |
Series | acer-wmi: Various improvements | expand |
On Tue, Dec 10, 2024 at 01:16:55AM +0100, Armin Wolf wrote: > If a call to ACER_WMID_GET_GAMING_SYS_INFO_METHODID fails, the lower > 8 bits will be non-zero. Introduce a helper function to check this and > use it when reading gaming system information. > > Tested-by: Rayan Margham <rayanmargham4@gmail.com> > Signed-off-by: Armin Wolf <W_Armin@gmx.de> > --- > drivers/platform/x86/acer-wmi.c | 55 +++++++++++++++++++++------------ > 1 file changed, 36 insertions(+), 19 deletions(-) > > diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c > index dd57787466b9..ac4500f33b8c 100644 > --- a/drivers/platform/x86/acer-wmi.c > +++ b/drivers/platform/x86/acer-wmi.c > @@ -70,6 +70,7 @@ MODULE_LICENSE("GPL"); > > #define ACER_PREDATOR_V4_THERMAL_PROFILE_EC_OFFSET 0x54 > > +#define ACER_PREDATOR_V4_RETURN_STATUS_BIT_MASK GENMASK_ULL(7, 0) > #define ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK GENMASK(20, 8) > > /* > @@ -1513,6 +1514,24 @@ static acpi_status WMID_gaming_get_u64(u64 *value, u32 cap) > return status; > } > > +static int WMID_gaming_get_sys_info(u32 command, u64 *out) > +{ > + acpi_status status; > + u64 result; > + > + status = WMI_gaming_execute_u64(ACER_WMID_GET_GAMING_SYS_INFO_METHODID, command, &result); > + if (ACPI_FAILURE(status)) > + return -EIO; > + > + /* The return status must be zero for the operation to have succeeded */ > + if (FIELD_GET(ACER_PREDATOR_V4_RETURN_STATUS_BIT_MASK, result)) > + return -EIO; > + > + *out = result; > + > + return 0; > +} > + > static void WMID_gaming_set_fan_mode(u8 fan_mode) > { > /* fan_mode = 1 is used for auto, fan_mode = 2 used for turbo*/ > @@ -1762,22 +1781,23 @@ static int acer_gsensor_event(void) > > static int acer_get_fan_speed(int fan) > { > - if (quirks->predator_v4) { > - acpi_status status; > - u64 fanspeed; > + u64 fanspeed; > + u32 command; > + int ret; > > - status = WMI_gaming_execute_u64( > - ACER_WMID_GET_GAMING_SYS_INFO_METHODID, > - fan == 0 ? ACER_WMID_CMD_GET_PREDATOR_V4_CPU_FAN_SPEED : > - ACER_WMID_CMD_GET_PREDATOR_V4_GPU_FAN_SPEED, > - &fanspeed); > + if (!quirks->predator_v4) > + return -EOPNOTSUPP; > > - if (ACPI_FAILURE(status)) > - return -EIO; > + if (fan == 0) > + command = ACER_WMID_CMD_GET_PREDATOR_V4_CPU_FAN_SPEED; > + else > + command = ACER_WMID_CMD_GET_PREDATOR_V4_GPU_FAN_SPEED; > > - return FIELD_GET(ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK, fanspeed); > - } > - return -EOPNOTSUPP; > + ret = WMID_gaming_get_sys_info(command, &fanspeed); > + if (ret < 0) > + return ret; > + > + return FIELD_GET(ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK, fanspeed); > } I wonder if it's necessary to refactor this function if you are going to drop it on Patch 4. > > /* > @@ -1942,12 +1962,9 @@ static int acer_thermal_profile_change(void) > return err; > > /* Check power source */ > - status = WMI_gaming_execute_u64( > - ACER_WMID_GET_GAMING_SYS_INFO_METHODID, > - ACER_WMID_CMD_GET_PREDATOR_V4_BAT_STATUS, &on_AC); > - > - if (ACPI_FAILURE(status)) > - return -EIO; > + err = WMID_gaming_get_sys_info(ACER_WMID_CMD_GET_PREDATOR_V4_BAT_STATUS, &on_AC); > + if (err < 0) > + return err; > > switch (current_tp) { > case ACER_PREDATOR_V4_THERMAL_PROFILE_TURBO: > -- > 2.39.5 >
Am 10.12.24 um 03:06 schrieb Kurt Borja: > On Tue, Dec 10, 2024 at 01:16:55AM +0100, Armin Wolf wrote: >> If a call to ACER_WMID_GET_GAMING_SYS_INFO_METHODID fails, the lower >> 8 bits will be non-zero. Introduce a helper function to check this and >> use it when reading gaming system information. >> >> Tested-by: Rayan Margham <rayanmargham4@gmail.com> >> Signed-off-by: Armin Wolf <W_Armin@gmx.de> >> --- >> drivers/platform/x86/acer-wmi.c | 55 +++++++++++++++++++++------------ >> 1 file changed, 36 insertions(+), 19 deletions(-) >> >> diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c >> index dd57787466b9..ac4500f33b8c 100644 >> --- a/drivers/platform/x86/acer-wmi.c >> +++ b/drivers/platform/x86/acer-wmi.c >> @@ -70,6 +70,7 @@ MODULE_LICENSE("GPL"); >> >> #define ACER_PREDATOR_V4_THERMAL_PROFILE_EC_OFFSET 0x54 >> >> +#define ACER_PREDATOR_V4_RETURN_STATUS_BIT_MASK GENMASK_ULL(7, 0) >> #define ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK GENMASK(20, 8) >> >> /* >> @@ -1513,6 +1514,24 @@ static acpi_status WMID_gaming_get_u64(u64 *value, u32 cap) >> return status; >> } >> >> +static int WMID_gaming_get_sys_info(u32 command, u64 *out) >> +{ >> + acpi_status status; >> + u64 result; >> + >> + status = WMI_gaming_execute_u64(ACER_WMID_GET_GAMING_SYS_INFO_METHODID, command, &result); >> + if (ACPI_FAILURE(status)) >> + return -EIO; >> + >> + /* The return status must be zero for the operation to have succeeded */ >> + if (FIELD_GET(ACER_PREDATOR_V4_RETURN_STATUS_BIT_MASK, result)) >> + return -EIO; >> + >> + *out = result; >> + >> + return 0; >> +} >> + >> static void WMID_gaming_set_fan_mode(u8 fan_mode) >> { >> /* fan_mode = 1 is used for auto, fan_mode = 2 used for turbo*/ >> @@ -1762,22 +1781,23 @@ static int acer_gsensor_event(void) >> >> static int acer_get_fan_speed(int fan) >> { >> - if (quirks->predator_v4) { >> - acpi_status status; >> - u64 fanspeed; >> + u64 fanspeed; >> + u32 command; >> + int ret; >> >> - status = WMI_gaming_execute_u64( >> - ACER_WMID_GET_GAMING_SYS_INFO_METHODID, >> - fan == 0 ? ACER_WMID_CMD_GET_PREDATOR_V4_CPU_FAN_SPEED : >> - ACER_WMID_CMD_GET_PREDATOR_V4_GPU_FAN_SPEED, >> - &fanspeed); >> + if (!quirks->predator_v4) >> + return -EOPNOTSUPP; >> >> - if (ACPI_FAILURE(status)) >> - return -EIO; >> + if (fan == 0) >> + command = ACER_WMID_CMD_GET_PREDATOR_V4_CPU_FAN_SPEED; >> + else >> + command = ACER_WMID_CMD_GET_PREDATOR_V4_GPU_FAN_SPEED; >> >> - return FIELD_GET(ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK, fanspeed); >> - } >> - return -EOPNOTSUPP; >> + ret = WMID_gaming_get_sys_info(command, &fanspeed); >> + if (ret < 0) >> + return ret; >> + >> + return FIELD_GET(ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK, fanspeed); >> } > I wonder if it's necessary to refactor this function if you are going to > drop it on Patch 4. I did it so each patch has a single well-defined scope. And refactoring this function was necessary for the patch being complete. Thanks, Armin Wolf >> /* >> @@ -1942,12 +1962,9 @@ static int acer_thermal_profile_change(void) >> return err; >> >> /* Check power source */ >> - status = WMI_gaming_execute_u64( >> - ACER_WMID_GET_GAMING_SYS_INFO_METHODID, >> - ACER_WMID_CMD_GET_PREDATOR_V4_BAT_STATUS, &on_AC); >> - >> - if (ACPI_FAILURE(status)) >> - return -EIO; >> + err = WMID_gaming_get_sys_info(ACER_WMID_CMD_GET_PREDATOR_V4_BAT_STATUS, &on_AC); >> + if (err < 0) >> + return err; >> >> switch (current_tp) { >> case ACER_PREDATOR_V4_THERMAL_PROFILE_TURBO: >> -- >> 2.39.5 >>
On Tue, Dec 10, 2024 at 05:08:01AM +0100, Armin Wolf wrote: > Am 10.12.24 um 03:06 schrieb Kurt Borja: > > > On Tue, Dec 10, 2024 at 01:16:55AM +0100, Armin Wolf wrote: > > > If a call to ACER_WMID_GET_GAMING_SYS_INFO_METHODID fails, the lower > > > 8 bits will be non-zero. Introduce a helper function to check this and > > > use it when reading gaming system information. > > > > > > Tested-by: Rayan Margham <rayanmargham4@gmail.com> > > > Signed-off-by: Armin Wolf <W_Armin@gmx.de> > > > --- > > > drivers/platform/x86/acer-wmi.c | 55 +++++++++++++++++++++------------ > > > 1 file changed, 36 insertions(+), 19 deletions(-) > > > > > > diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c > > > index dd57787466b9..ac4500f33b8c 100644 > > > --- a/drivers/platform/x86/acer-wmi.c > > > +++ b/drivers/platform/x86/acer-wmi.c > > > @@ -70,6 +70,7 @@ MODULE_LICENSE("GPL"); > > > > > > #define ACER_PREDATOR_V4_THERMAL_PROFILE_EC_OFFSET 0x54 > > > > > > +#define ACER_PREDATOR_V4_RETURN_STATUS_BIT_MASK GENMASK_ULL(7, 0) > > > #define ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK GENMASK(20, 8) > > > > > > /* > > > @@ -1513,6 +1514,24 @@ static acpi_status WMID_gaming_get_u64(u64 *value, u32 cap) > > > return status; > > > } > > > > > > +static int WMID_gaming_get_sys_info(u32 command, u64 *out) > > > +{ > > > + acpi_status status; > > > + u64 result; > > > + > > > + status = WMI_gaming_execute_u64(ACER_WMID_GET_GAMING_SYS_INFO_METHODID, command, &result); > > > + if (ACPI_FAILURE(status)) > > > + return -EIO; > > > + > > > + /* The return status must be zero for the operation to have succeeded */ > > > + if (FIELD_GET(ACER_PREDATOR_V4_RETURN_STATUS_BIT_MASK, result)) > > > + return -EIO; > > > + > > > + *out = result; > > > + > > > + return 0; > > > +} > > > + > > > static void WMID_gaming_set_fan_mode(u8 fan_mode) > > > { > > > /* fan_mode = 1 is used for auto, fan_mode = 2 used for turbo*/ > > > @@ -1762,22 +1781,23 @@ static int acer_gsensor_event(void) > > > > > > static int acer_get_fan_speed(int fan) > > > { > > > - if (quirks->predator_v4) { > > > - acpi_status status; > > > - u64 fanspeed; > > > + u64 fanspeed; > > > + u32 command; > > > + int ret; > > > > > > - status = WMI_gaming_execute_u64( > > > - ACER_WMID_GET_GAMING_SYS_INFO_METHODID, > > > - fan == 0 ? ACER_WMID_CMD_GET_PREDATOR_V4_CPU_FAN_SPEED : > > > - ACER_WMID_CMD_GET_PREDATOR_V4_GPU_FAN_SPEED, > > > - &fanspeed); > > > + if (!quirks->predator_v4) > > > + return -EOPNOTSUPP; > > > > > > - if (ACPI_FAILURE(status)) > > > - return -EIO; > > > + if (fan == 0) > > > + command = ACER_WMID_CMD_GET_PREDATOR_V4_CPU_FAN_SPEED; > > > + else > > > + command = ACER_WMID_CMD_GET_PREDATOR_V4_GPU_FAN_SPEED; > > > > > > - return FIELD_GET(ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK, fanspeed); > > > - } > > > - return -EOPNOTSUPP; > > > + ret = WMID_gaming_get_sys_info(command, &fanspeed); > > > + if (ret < 0) > > > + return ret; > > > + > > > + return FIELD_GET(ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK, fanspeed); > > > } > > I wonder if it's necessary to refactor this function if you are going to > > drop it on Patch 4. > > I did it so each patch has a single well-defined scope. And refactoring this function was necessary for > the patch being complete. I'll keep that in mind when submitting. In that case: Reviewed-by: Kurt Borja <kuurtb@gmail.com> I apologize If this was out of place, as I'm still learning! ~ Kurt > > Thanks, > Armin Wolf > > > > /* > > > @@ -1942,12 +1962,9 @@ static int acer_thermal_profile_change(void) > > > return err; > > > > > > /* Check power source */ > > > - status = WMI_gaming_execute_u64( > > > - ACER_WMID_GET_GAMING_SYS_INFO_METHODID, > > > - ACER_WMID_CMD_GET_PREDATOR_V4_BAT_STATUS, &on_AC); > > > - > > > - if (ACPI_FAILURE(status)) > > > - return -EIO; > > > + err = WMID_gaming_get_sys_info(ACER_WMID_CMD_GET_PREDATOR_V4_BAT_STATUS, &on_AC); > > > + if (err < 0) > > > + return err; > > > > > > switch (current_tp) { > > > case ACER_PREDATOR_V4_THERMAL_PROFILE_TURBO: > > > -- > > > 2.39.5 > > >
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index dd57787466b9..ac4500f33b8c 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -70,6 +70,7 @@ MODULE_LICENSE("GPL"); #define ACER_PREDATOR_V4_THERMAL_PROFILE_EC_OFFSET 0x54 +#define ACER_PREDATOR_V4_RETURN_STATUS_BIT_MASK GENMASK_ULL(7, 0) #define ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK GENMASK(20, 8) /* @@ -1513,6 +1514,24 @@ static acpi_status WMID_gaming_get_u64(u64 *value, u32 cap) return status; } +static int WMID_gaming_get_sys_info(u32 command, u64 *out) +{ + acpi_status status; + u64 result; + + status = WMI_gaming_execute_u64(ACER_WMID_GET_GAMING_SYS_INFO_METHODID, command, &result); + if (ACPI_FAILURE(status)) + return -EIO; + + /* The return status must be zero for the operation to have succeeded */ + if (FIELD_GET(ACER_PREDATOR_V4_RETURN_STATUS_BIT_MASK, result)) + return -EIO; + + *out = result; + + return 0; +} + static void WMID_gaming_set_fan_mode(u8 fan_mode) { /* fan_mode = 1 is used for auto, fan_mode = 2 used for turbo*/ @@ -1762,22 +1781,23 @@ static int acer_gsensor_event(void) static int acer_get_fan_speed(int fan) { - if (quirks->predator_v4) { - acpi_status status; - u64 fanspeed; + u64 fanspeed; + u32 command; + int ret; - status = WMI_gaming_execute_u64( - ACER_WMID_GET_GAMING_SYS_INFO_METHODID, - fan == 0 ? ACER_WMID_CMD_GET_PREDATOR_V4_CPU_FAN_SPEED : - ACER_WMID_CMD_GET_PREDATOR_V4_GPU_FAN_SPEED, - &fanspeed); + if (!quirks->predator_v4) + return -EOPNOTSUPP; - if (ACPI_FAILURE(status)) - return -EIO; + if (fan == 0) + command = ACER_WMID_CMD_GET_PREDATOR_V4_CPU_FAN_SPEED; + else + command = ACER_WMID_CMD_GET_PREDATOR_V4_GPU_FAN_SPEED; - return FIELD_GET(ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK, fanspeed); - } - return -EOPNOTSUPP; + ret = WMID_gaming_get_sys_info(command, &fanspeed); + if (ret < 0) + return ret; + + return FIELD_GET(ACER_PREDATOR_V4_FAN_SPEED_READ_BIT_MASK, fanspeed); } /* @@ -1942,12 +1962,9 @@ static int acer_thermal_profile_change(void) return err; /* Check power source */ - status = WMI_gaming_execute_u64( - ACER_WMID_GET_GAMING_SYS_INFO_METHODID, - ACER_WMID_CMD_GET_PREDATOR_V4_BAT_STATUS, &on_AC); - - if (ACPI_FAILURE(status)) - return -EIO; + err = WMID_gaming_get_sys_info(ACER_WMID_CMD_GET_PREDATOR_V4_BAT_STATUS, &on_AC); + if (err < 0) + return err; switch (current_tp) { case ACER_PREDATOR_V4_THERMAL_PROFILE_TURBO: