| Message ID | 20241209103455.9675-1-quic_janathot@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Enable Bluetooth on qcs6490-rb3gen2 board | expand |
On Mon, 09 Dec 2024 16:04:51 +0530, Janaki Ramaiah Thota wrote: > - Patch 1/4 Add description of the PMU of the WCN6750 module. > - Patch 2/4 add and enable BT node for qcs6490-rb3gen board. > - Patch 3/4 use the power sequencer for wcn6750. > - Patch 4/4 add support for the WCN6750 PMU. > > ---- > Changes from v4: > * Added reviewed tag by Krzysztof in p1 > * Updated the p2 commit message with sw_ctrl and wifi-enable are > handled in wifi FW. > * Added blank line between the nodes in p2 > * Placed the structures in proper order in p4 > * Link to v4: https://lore.kernel.org/all/20241204131706.20791-1-quic_janathot@quicinc.com/ > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next Thanks! [1/4] regulator:·dt-bindings:·qcom,qca6390-pmu:·document wcn6750-pmu commit: 8099b1f7e37e98f73664b883464d54e2e2d9522f All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> On Mon, 09 Dec 2024 16:04:51 +0530, Janaki Ramaiah Thota wrote: > - Patch 1/4 Add description of the PMU of the WCN6750 module. > - Patch 2/4 add and enable BT node for qcs6490-rb3gen board. > - Patch 3/4 use the power sequencer for wcn6750. > - Patch 4/4 add support for the WCN6750 PMU. > > ---- > Changes from v4: > * Added reviewed tag by Krzysztof in p1 > * Updated the p2 commit message with sw_ctrl and wifi-enable are > handled in wifi FW. > * Added blank line between the nodes in p2 > * Placed the structures in proper order in p4 > * Link to v4: https://lore.kernel.org/all/20241204131706.20791-1-quic_janathot@quicinc.com/ > > [...] Applied, thanks! [4/4] power: sequencing: qcom-wcn: add support for the WCN6750 PMU commit: 93e3c990fcd90e578fd23b572a6c89020c7a453e Best regards,
On Mon, 09 Dec 2024 16:04:51 +0530, Janaki Ramaiah Thota wrote: > - Patch 1/4 Add description of the PMU of the WCN6750 module. > - Patch 2/4 add and enable BT node for qcs6490-rb3gen board. > - Patch 3/4 use the power sequencer for wcn6750. > - Patch 4/4 add support for the WCN6750 PMU. > > ---- > Changes from v4: > * Added reviewed tag by Krzysztof in p1 > * Updated the p2 commit message with sw_ctrl and wifi-enable are > handled in wifi FW. > * Added blank line between the nodes in p2 > * Placed the structures in proper order in p4 > * Link to v4: https://lore.kernel.org/all/20241204131706.20791-1-quic_janathot@quicinc.com/ > > Changes from v3: > * Defined the PMU node and used the its output to power up BT > * Used power sequencer for wcn wcn6750 module > * Split the patch to multiple as per subtree > * Add description of the PMU of the WCN6750 module > * Include separate UART state node for sleep pin configuarion > * Link to v3: https://lore.kernel.org/linux-arm-msm/20241022104600.3228-1-quic_janathot@quicinc.com/ > > Changes from v2: > * Sorted nodes alphabetically > * Link to v2: https://lore.kernel.org/linux-arm-msm/20241010105107.30118-1-quic_janathot@quicinc.com/ > > Changes from v1: > * Corrected the board name in subject > * Link to v1: https://lore.kernel.org/linux-arm-msm/20241009111436.23473-1-quic_janathot@quicinc.com/ > > Janaki Ramaiah Thota (4): > regulator:·dt-bindings:·qcom,qca6390-pmu:·document wcn6750-pmu > arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node > Bluetooth: hci_qca: use the power sequencer for wcn6750 > power: sequencing: qcom-wcn: add support for the WCN6750 PMU > > .../bindings/regulator/qcom,qca6390-pmu.yaml | 27 +++ > arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 168 +++++++++++++++++- > drivers/bluetooth/hci_qca.c | 2 +- > drivers/power/sequencing/pwrseq-qcom-wcn.c | 22 +++ > 4 files changed, 217 insertions(+), 2 deletions(-) > > -- > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y qcom/qcs6490-rb3gen2.dtb' for 20241209103455.9675-1-quic_janathot@quicinc.com: arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'enable-gpios' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'swctrl-gpios' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddio-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddbtcxmx-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddasd-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: pinctrl@f100000: Unevaluated properties are not allowed ('qup_uart7_sleep' was unexpected) from schema $id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml#
On 12/11/2024 3:12 AM, Rob Herring (Arm) wrote: > > On Mon, 09 Dec 2024 16:04:51 +0530, Janaki Ramaiah Thota wrote: >> - Patch 1/4 Add description of the PMU of the WCN6750 module. >> - Patch 2/4 add and enable BT node for qcs6490-rb3gen board. >> - Patch 3/4 use the power sequencer for wcn6750. >> - Patch 4/4 add support for the WCN6750 PMU. >> >> ---- >> Changes from v4: >> * Added reviewed tag by Krzysztof in p1 >> * Updated the p2 commit message with sw_ctrl and wifi-enable are >> handled in wifi FW. >> * Added blank line between the nodes in p2 >> * Placed the structures in proper order in p4 >> * Link to v4: https://lore.kernel.org/all/20241204131706.20791-1-quic_janathot@quicinc.com/ >> >> Changes from v3: >> * Defined the PMU node and used the its output to power up BT >> * Used power sequencer for wcn wcn6750 module >> * Split the patch to multiple as per subtree >> * Add description of the PMU of the WCN6750 module >> * Include separate UART state node for sleep pin configuarion >> * Link to v3: https://lore.kernel.org/linux-arm-msm/20241022104600.3228-1-quic_janathot@quicinc.com/ >> >> Changes from v2: >> * Sorted nodes alphabetically >> * Link to v2: https://lore.kernel.org/linux-arm-msm/20241010105107.30118-1-quic_janathot@quicinc.com/ >> >> Changes from v1: >> * Corrected the board name in subject >> * Link to v1: https://lore.kernel.org/linux-arm-msm/20241009111436.23473-1-quic_janathot@quicinc.com/ >> >> Janaki Ramaiah Thota (4): >> regulator:·dt-bindings:·qcom,qca6390-pmu:·document wcn6750-pmu >> arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node >> Bluetooth: hci_qca: use the power sequencer for wcn6750 >> power: sequencing: qcom-wcn: add support for the WCN6750 PMU >> >> .../bindings/regulator/qcom,qca6390-pmu.yaml | 27 +++ >> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 168 +++++++++++++++++- >> drivers/bluetooth/hci_qca.c | 2 +- >> drivers/power/sequencing/pwrseq-qcom-wcn.c | 22 +++ >> 4 files changed, 217 insertions(+), 2 deletions(-) >> >> -- >> >> >> > > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > New warnings running 'make CHECK_DTBS=y qcom/qcs6490-rb3gen2.dtb' for 20241209103455.9675-1-quic_janathot@quicinc.com: > > arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'enable-gpios' is a required property > from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# > arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'swctrl-gpios' is a required property > from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# > arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddio-supply' is a required property > from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# > arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddbtcxmx-supply' is a required property > from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# > arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddasd-supply' is a required property > from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# > arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: pinctrl@f100000: Unevaluated properties are not allowed ('qup_uart7_sleep' was unexpected) > from schema $id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml# > Since the DTS files for all boards using the WCN6750 BT chip are not updated according to the PMU node, updating the bluetooth/qualcomm-bluetooth.yaml file will result in similar warnings for other boards. Thanks, Janakiram
On 12.12.2024 11:46 AM, Janaki Ramaiah Thota wrote: > > > On 12/11/2024 3:12 AM, Rob Herring (Arm) wrote: >> >> On Mon, 09 Dec 2024 16:04:51 +0530, Janaki Ramaiah Thota wrote: >>> - Patch 1/4 Add description of the PMU of the WCN6750 module. >>> - Patch 2/4 add and enable BT node for qcs6490-rb3gen board. >>> - Patch 3/4 use the power sequencer for wcn6750. >>> - Patch 4/4 add support for the WCN6750 PMU. >>> >>> ---- >>> Changes from v4: >>> * Added reviewed tag by Krzysztof in p1 >>> * Updated the p2 commit message with sw_ctrl and wifi-enable are >>> handled in wifi FW. >>> * Added blank line between the nodes in p2 >>> * Placed the structures in proper order in p4 >>> * Link to v4: https://lore.kernel.org/all/20241204131706.20791-1-quic_janathot@quicinc.com/ >>> >>> Changes from v3: >>> * Defined the PMU node and used the its output to power up BT >>> * Used power sequencer for wcn wcn6750 module >>> * Split the patch to multiple as per subtree >>> * Add description of the PMU of the WCN6750 module >>> * Include separate UART state node for sleep pin configuarion >>> * Link to v3: https://lore.kernel.org/linux-arm-msm/20241022104600.3228-1-quic_janathot@quicinc.com/ >>> >>> Changes from v2: >>> * Sorted nodes alphabetically >>> * Link to v2: https://lore.kernel.org/linux-arm-msm/20241010105107.30118-1-quic_janathot@quicinc.com/ >>> >>> Changes from v1: >>> * Corrected the board name in subject >>> * Link to v1: https://lore.kernel.org/linux-arm-msm/20241009111436.23473-1-quic_janathot@quicinc.com/ >>> >>> Janaki Ramaiah Thota (4): >>> regulator:·dt-bindings:·qcom,qca6390-pmu:·document wcn6750-pmu >>> arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node >>> Bluetooth: hci_qca: use the power sequencer for wcn6750 >>> power: sequencing: qcom-wcn: add support for the WCN6750 PMU >>> >>> .../bindings/regulator/qcom,qca6390-pmu.yaml | 27 +++ >>> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 168 +++++++++++++++++- >>> drivers/bluetooth/hci_qca.c | 2 +- >>> drivers/power/sequencing/pwrseq-qcom-wcn.c | 22 +++ >>> 4 files changed, 217 insertions(+), 2 deletions(-) >>> >>> -- >>> >>> >>> >> >> >> My bot found new DTB warnings on the .dts files added or changed in this >> series. >> >> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings >> are fixed by another series. Ultimately, it is up to the platform >> maintainer whether these warnings are acceptable or not. No need to reply >> unless the platform maintainer has comments. >> >> If you already ran DT checks and didn't see these error(s), then >> make sure dt-schema is up to date: >> >> pip3 install dtschema --upgrade >> >> >> New warnings running 'make CHECK_DTBS=y qcom/qcs6490-rb3gen2.dtb' for 20241209103455.9675-1-quic_janathot@quicinc.com: >> >> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'enable-gpios' is a required property >> from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# >> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'swctrl-gpios' is a required property >> from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# >> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddio-supply' is a required property >> from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# >> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddbtcxmx-supply' is a required property >> from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# >> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: bluetooth: 'vddasd-supply' is a required property >> from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# >> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: pinctrl@f100000: Unevaluated properties are not allowed ('qup_uart7_sleep' was unexpected) >> from schema $id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml# >> > > Since the DTS files for all boards using the WCN6750 BT chip are not updated according to the PMU node, updating the bluetooth/qualcomm-bluetooth.yaml file will result in similar warnings for other boards. Oh I didn't forsee this.. You must fix up any bindings errors that result from your changes (i.e. binding errors are the same as compilation errors). That means patch 2 can't be merged unless the bluetooth dt-bindings are adjusted. And for the bindings to be adjusted, you'll have to also add the PMU node to all boards implementing wcn6750. Fortunately, they are all based on some variants of the same SoC, so they should all have the same power plumbing. Konrad