| Message ID | 20241212-qcom-video-iris-v9-0-e8c2c6bd4041@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Qualcomm iris video decoder driver | expand |
On 12/12/2024 12:51, Dikshita Agarwal wrote: > Introduce support for Qualcomm new video acceleration hardware i.e. > iris, used for video stream decoding. > > Iris is a multi pipe based hardware that offloads video stream decoding > from the application processor (AP). It supports H.264 decoding. The AP > communicates with hardware through a well defined protocol, called as > host firmware interface (HFI), which provides fine-grained and > asynchronous control over individual hardware features. > > This driver implements upgraded HFI gen2 to communicate with firmware. > It supports SM8550 which is based out of HFI gen 2. It also supports > SM8250 which is based out of HFI gen1. > Thank you for your contributions. This patchset is relatively big, so please slow down with sending new versions to one per few days, not one per 24h. This gives people more chances to review. Best regards, Krzysztof
On 12/12/2024 12:51, Dikshita Agarwal wrote: > Introduce support for Qualcomm new video acceleration hardware i.e. > iris, used for video stream decoding. > > Iris is a multi pipe based hardware that offloads video stream decoding > from the application processor (AP). It supports H.264 decoding. The AP > communicates with hardware through a well defined protocol, called as > host firmware interface (HFI), which provides fine-grained and > asynchronous control over individual hardware features. > > This driver implements upgraded HFI gen2 to communicate with firmware. > It supports SM8550 which is based out of HFI gen 2. It also supports > SM8250 which is based out of HFI gen1. > > This driver comes with below capabilities: > - V4L2 complaint video driver with M2M and STREAMING capability. > - Supports H264 decoder. > > This driver comes with below features: > - Centralized resource management. > - Centralized management of core and instance states. > - Defines platform specific capabilities and features. As a results, it > provides a single point of control to enable/disable a given feature > depending on specific platform capabilities. > - Handles various video recommended sequences, like DRC, Drain, Seek, > EOS. > - Implements asynchronous communication with hardware to achieve better > experience in low latency usecases. > - Output and capture planes are controlled independently. Thereby > providing a way to reconfigure individual plane. > - Native hardware support of LAST flag which is mandatory to align with > port reconfiguration and DRAIN sequence as per V4L guidelines. > > Changes since v8: > - re-order supported profile for h264 (Stefan) > - move mapping of DEBLOCK cap to patch#14 (Stefan, Dmitry) > - add a way to read the firmware path from dtsi and fallback to resource > data if not available (dikshita) > - Link to v8: https://lore.kernel.org/r/20241210-qcom-video-iris-v8-0-42c5403cb1a3@quicinc.com > > Changes since v7: > - Added HFI_ERROR_STREAM_UNSUPPORTED define to inform about session > error (Stefan) > - Fixed kernel doc issues > - Link to v7: https://lore.kernel.org/r/20241209-qcom-video-iris-v7-0-05c6bdead47b@quicinc.com > > Changes since v6: > - Added vb2_is_busy check in s_fmt (Hans) > - Removed q->streaming checks in s_fmt (Hans) > - Removed usage of inst->subscriptions (Hans) > - Added call to v4l2_m2m_ioctl_decoder_cmd() from iris_dec_cmd() API (Hans) > - Fixed issues related to kernel docs. > - Addressed all other review comments. > - Link to v6: https://lore.kernel.org/r/20241120-qcom-video-iris-v6-0-a8cf6704e992@quicinc.com > > Changes since v5: > - Fixed the memory leak in firmware load (Bryan) > - Updated all headers s/_LIKE_SO_/__LIKE_SO__ (Bryan) > - Updated value of IFACEQ_MAX_BUF_COUNT to 64 (Bryan) > - Removed actual_count from iris buffer structure and cleaned up > vb2_queue_setup (Hans) > - Used VIDEO_MAX_FRAME to set actual buffer to firmware (Hans) > - Fixed the typo in commit log and subject of patch#12 (Hans) > - Updated card field to Iris Decoder (Hans) > - Removed redundant setting of byteused (Hans) > - s/iris_driver/is_iris_driver (Jianhua) > - Addressed all other review comments. > - Link to v5: https://lore.kernel.org/r/20241105-qcom-video-iris-v5-0-a88e7c220f78@quicinc.com > > Changes since v4: > - Fixed commit message length for all patches (Krzysztof) > - Migrated back to remove from remove_new (Uwe Kleine-König) > - Removed support for g_volatle_ctrl (Hans) > - Added changes to update minimum buffer count whenever the hardware > requirement changes (Hans) > - Removed state checks from try/g/s_fmt ioctls (Hans) > - Removed wait_prepare() and wait_finish callbacks (Hans) > - Added support for remove_bufs (Hans) > - Added module param based configurability to select between venus and > iris drivers for platforms supported by both drivers (Jianhua, Dmitry) > - Addressed misc other review comments from Hans. > - Fixed issues reported by kernel bot. > - Link to v4: https://lore.kernel.org/r/20241014-qcom-video-iris-v4-v4-0-c5eaa4e9ab9e@quicinc.com > > Changes since v3: > - Fixed the style issues with dt binding (Krzysztof) > - Pushed the patch to add maintainers to end of the series (Krzysztof, > Dmitry) > - Moved the resource initialization next to probe in iris_probe.c and > squashed the patch of probe and resource initialization (Krzysztof) > - Removed error prints from probe function (Krzysztof) > - Defined bit fields used for register read/write with macros for better > context (Bryan) > - Converted if/else to switch/case wherever applicable (Bryan) > - Removed defensive NULL checks wherever not required (Bryan, Krzysztof) > - Removed core->state checks except for below scenarios (Bryan) > - When reverse thread (firmware) can move the state of the core to > error state. > - When client can force close the driver and there are still pending > firmware responses to be read from shared queues (msg and dbg) > - For PM operations, since its a delayed autosuspend work and sys > error handler from the reverse thread can move the state to core > deinit state anytime. > - Acquiring core->lock only for below scenarios (Bryan) > - Writing to registers. > - Reading/Writing from/to shared queues. > - Traversing the instance list of core. > - To protect the core->state when it can changed by reverse thread. > - Acquiring inst->lock only for below scenario which is needed (Bryan) > - Serializing the forward and reverse thread > - To protect the inst structure where the values can be modified by > firmware. > - Removed usage of core->power_enabled (Krzysztof, Bryan) > - Removed usage of mutex_is_locked (Krzysztof, Bryan) > - Use C structure for instance caps (Dmitry) > - Split the ctrl ops patch by keeping only the defines, struct and caps > needed to intialize the ctrl handler and to implement s/g_ctrl > (Dmitry) > - Removed the instance state checks to allow v4l2-ctl, relying on > standard vb2 checks instead. (Hans) > - Converted APIs to void wherever applicable except for below (Bryan) > - iris_hfi_gen2_handle_session_error and > iris_hfi_gen2_handle_session_property cannot be converted to void > even though they always return 0. > Because these are two of the handlers invoked from > iris_hfi_gen2_handle_session_response and are of > iris_hfi_gen2_inst_hfi_range struct type, where same prototype is > followed for all handlers and return type of all handers should be > 'int'. > And we cannot have a switch case/if else to handle these > responses from firmware because we need to parse the responses in a > particular sequence. > That's why we opted for this handler based design instead of > introducing multiple for loop with code duplication. > - Fixed issues reported by kernel bot. > - Fixed v4l2 compliance issue reported with "-s" options based on the > inputs from Hans. > - Addressed all other review comments and made some code improvements. > > Changes since v2: > - introduced support for HFI gen1. > - deprecated Encoder and HEVC, VP9 codecs. > - removed custom vb2 mem ops and used standard framework instead. > - added support for mmap streaming mode. > - migrated all the buffer APIs to mem2mem helper functions. > - registered iris buffer with vb2 framework. > - migrated to clk_bulk, reset_bulk and icc_bulk APIs. > - used pm_domain_attach/detach_list APIs. > - migrated to read/writel and other available helpers for register > access instead of custom wrappers. > - added documentation for various structures. > - addressed many other review comments from v2. > > Note: A harmless onetime error log "Lucid PLL latch failed. Output may > be unstable!" is seen during bootup. It doesn't impact any video > usecase and is currently under discussion. > > Static tools like checkpatch, smatch, dt_binding_check, sparse and > Coccinelle run successfully with this driver. > > This driver is tested with v4l2-ctl[1] and Gstreamer[2]. > > [1]: v4l2-ctl --verbose --set-fmt-video-out=pixelformat=H264 > --set-fmt-video=pixelformat=NV12 --stream-mmap --stream-out-mmap > --stream-from /media/FVDO_Freeway_720p.264 --stream-to out.NV12 > > [2]: gst-launch-1.0 filesrc location=/media/media/4k_decode_clip.264 ! > h264parse ! v4l2h264dec capture-io-mode=dmabuf ! kmssink > > The driver is tested with v4l2-compliance. > > Result on SM8550: > > v4l2-compliance --stream-from /media/FVDO_Freeway_720p.264 -s250 > > v4l2-compliance 1.29.0-5273, 64 bits, 64-bit time_t > v4l2-compliance SHA: 0ed98432fe68 2024-11-13 12:54:45 > > Compliance test for iris_driver device /dev/video0: > > Driver Info: > Driver name : iris_driver > Card type : iris_decoder > Bus info : platform:aa00000.video-codec > Driver version : 6.12.0 > Capabilities : 0x84204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > Detected Stateful Decoder > > Required ioctls: > test VIDIOC_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/video0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 5 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK > test Composing: OK > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test CREATE_BUFS maximum buffers: OK > test VIDIOC_REMOVE_BUFS: OK > test VIDIOC_EXPBUF: OK > test Requests: OK (Not Supported) > test blocking wait: OK > > Test input 0: > > Streaming ioctls: > test read/write: OK (Not Supported) > test MMAP (select, REQBUFS): OK > test MMAP (epoll, REQBUFS): OK > test MMAP (select, CREATE_BUFS): OK > test MMAP (epoll, CREATE_BUFS): OK > test USERPTR (select): OK (Not Supported) > test DMABUF: Cannot test, specify --expbuf-device > > Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0, > Warnings: 0 > > Result on SM8250: > > v4l2-compliance --stream-from /media/FVDO_Freeway_720p.264 -s250 > > v4l2-compliance 1.29.0-5273, 64 bits, 64-bit time_t > v4l2-compliance SHA: 0ed98432fe68 2024-11-13 12:54:45 > > Compliance test for iris_driver device /dev/video0: > > Driver Info: > Driver name : iris_driver > Card type : iris_decoder > Bus info : platform:aa00000.video-codec > Driver version : 6.12.0 > Capabilities : 0x84204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > Detected Stateful Decoder > > Required ioctls: > test VIDIOC_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/video0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 5 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK > test Composing: OK > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test CREATE_BUFS maximum buffers: OK > test VIDIOC_REMOVE_BUFS: OK > test VIDIOC_EXPBUF: OK > test Requests: OK (Not Supported) > test blocking wait: OK > > Test input 0: > > Streaming ioctls: > test read/write: OK (Not Supported) > test MMAP (select, REQBUFS): OK > test MMAP (epoll, REQBUFS): OK > test MMAP (select, CREATE_BUFS): OK > test MMAP (epoll, CREATE_BUFS): OK > test USERPTR (select): OK (Not Supported) > test DMABUF: Cannot test, specify --expbuf-device > > Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0, > Warnings: 0 > > The result of fluster test on SM8550: > > 77/135 while testing JVT-AVC_V1 with > GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1. > The failing tests are: > - 52 test vectors failed due to interlaced clips: Interlaced decoding is > not supported in iris driver. > Test Vectors: > cabac_mot_fld0_full > cabac_mot_mbaff0_full > cabac_mot_picaff0_full > CABREF3_Sand_D > CAFI1_SVA_C > CAMA1_Sony_C > CAMA1_TOSHIBA_B > cama1_vtc_c > cama2_vtc_b > CAMA3_Sand_E > cama3_vtc_b > CAMACI3_Sony_C > CAMANL1_TOSHIBA_B > CAMANL2_TOSHIBA_B > CAMANL3_Sand_E > CAMASL3_Sony_B > CAMP_MOT_MBAFF_L30 > CAMP_MOT_MBAFF_L31 > CANLMA2_Sony_C > CANLMA3_Sony_C > CAPA1_TOSHIBA_B > CAPAMA3_Sand_F > cavlc_mot_fld0_full_B > cavlc_mot_mbaff0_full_B > cavlc_mot_picaff0_full_B > CVCANLMA2_Sony_C > CVFI1_Sony_D > CVFI1_SVA_C > CVFI2_Sony_H > CVFI2_SVA_C > CVMA1_Sony_D > CVMA1_TOSHIBA_B > CVMANL1_TOSHIBA_B > CVMANL2_TOSHIBA_B > CVMAPAQP3_Sony_E > CVMAQP2_Sony_G > CVMAQP3_Sony_D > CVMP_MOT_FLD_L30_B > CVNLFI1_Sony_C > CVNLFI2_Sony_H > CVPA1_TOSHIBA_B > FI1_Sony_E > MR6_BT_B > MR7_BT_B > MR8_BT_B > MR9_BT_B > Sharp_MP_Field_1_B > Sharp_MP_Field_2_B > Sharp_MP_Field_3_B > Sharp_MP_PAFF_1r2 > Sharp_MP_PAFF_2r > CVMP_MOT_FRM_L31_B > - 3 test vectors failed due to unsupported bitstream. > num_slice_group_minus1 greater than zero is not supported by the > hardware. > Test Vectors: > FM1_BT_B > FM1_FT_E > FM2_SVA_C > - 2 test vectors failed because SP_SLICE type is not supported by the > hardware. > Test Vectors: > SP1_BT_A > sp2_bt_b > - 1 test vector failed due to unsupported profile: > V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED is being deprecated from sm8550 > onwards due to hardware issues. > Test Vectors: > BA3_SVA_C > > 23/69 while testing JVT-FR-EXT with > GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1. > The failing tests are: > - 21 test vectors failed due to interlaced clips: Interlaced decoding is > not supported in iris driver. > Test Vectors: > brcm_freh4 > brcm_freh5 > brcm_freh6 > brcm_freh10 > brcm_freh11 > freh7_b > FREXT01_JVC_D > FREXT02_JVC_C > FRExt2_Panasonic_C > FRExt4_Panasonic_B > HCAFF1_HHI_B > HCAMFF1_HHI_B > HCHP3_HHI_A > HPCAFL_BRCM_C > HPCAFLNL_BRCM_C > HVLCFI0_Sony_B > HVLCMFF0_Sony_B > HVLCPFF0_Sony_B > HPCAMAPALQ_BRCM_B > HPCVFL_BRCM_A > HPCVFLNL_BRCM_A > - 2 test vectors failed due to 10bit bitstream: 10bit decoding is not > supported in iris driver > Test Vectors: > FREH10-1 > FREH10-2 > - 21 test vectors failed due to unsupported profile: > V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the > hardware. > Test Vectors: > FREXT1_TANDBERG_A > FREXT2_TANDBERG_A > FREXT3_TANDBERG_A > Hi422FR1_SONY_A > Hi422FR2_SONY_A > Hi422FR3_SONY_A > Hi422FR4_SONY_A > Hi422FR6_SONY_A > Hi422FR7_SONY_A > Hi422FR8_SONY_A > Hi422FR9_SONY_A > Hi422FR10_SONY_A > Hi422FR11_SONY_A > Hi422FR12_SONY_A > Hi422FR13_SONY_A > Hi422FR14_SONY_A > Hi422FR15_SONY_A > Hi422FREXT16_SONY_A > Hi422FREXT17_SONY_A > Hi422FREXT18_SONY_A > Hi422FREXT19_SONY_A > - 2 test vectors failed due to unsupported bitstream. > chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not > supported by the hardware. > Test Vectors: > HPCAMOLQ_BRCM_B > HPCVMOLQ_BRCM_B > > The result of fluster test on SM8250: > > 78/135 while testing JVT-AVC_V1 with > GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1. > The failing tests are: > - 52 test vectors failed due to interlaced clips: Interlaced decoding is > not supported in iris driver. > Test Vectors: > cabac_mot_fld0_full > cabac_mot_mbaff0_full > cabac_mot_picaff0_full > CABREF3_Sand_D > CAFI1_SVA_C > CAMA1_Sony_C > CAMA1_TOSHIBA_B > cama1_vtc_c > cama2_vtc_b > CAMA3_Sand_E > cama3_vtc_b > CAMACI3_Sony_C > CAMANL1_TOSHIBA_B > CAMANL2_TOSHIBA_B > CAMANL3_Sand_E > CAMASL3_Sony_B > CAMP_MOT_MBAFF_L30 > CAMP_MOT_MBAFF_L31 > CANLMA2_Sony_C > CANLMA3_Sony_C > CAPA1_TOSHIBA_B > CAPAMA3_Sand_F > cavlc_mot_fld0_full_B > cavlc_mot_mbaff0_full_B > cavlc_mot_picaff0_full_B > CVCANLMA2_Sony_C > CVFI1_Sony_D > CVFI1_SVA_C > CVFI2_Sony_H > CVFI2_SVA_C > CVMA1_Sony_D > CVMA1_TOSHIBA_B > CVMANL1_TOSHIBA_B > CVMANL2_TOSHIBA_B > CVMAPAQP3_Sony_E > CVMAQP2_Sony_G > CVMAQP3_Sony_D > CVMP_MOT_FLD_L30_B > CVNLFI1_Sony_C > CVNLFI2_Sony_H > CVPA1_TOSHIBA_B > FI1_Sony_E > MR6_BT_B > MR7_BT_B > MR8_BT_B > MR9_BT_B > Sharp_MP_Field_1_B > Sharp_MP_Field_2_B > Sharp_MP_Field_3_B > Sharp_MP_PAFF_1r2 > Sharp_MP_PAFF_2r > CVMP_MOT_FRM_L31_B > - 3 test vectors failed due to unsupported bitstream. > num_slice_group_minus1 greater than zero is not supported by the > hardware. > Test Vectors: > FM1_BT_B > FM1_FT_E > FM2_SVA_C > - 2 test vectors failed because SP_SLICE type is not supported by the > hardware. > Test Vectors: > SP1_BT_A > sp2_bt_b > > 23/69 while testing JVT-FR-EXT with > GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1. > The failing tests are: > - 21 test vectors failed due to interlaced clips: Interlaced decoding is > not supported in iris driver. > Test Vectors: > brcm_freh4 > brcm_freh5 > brcm_freh6 > brcm_freh10 > brcm_freh11 > freh7_b > FREXT01_JVC_D > FREXT02_JVC_C > FRExt2_Panasonic_C > FRExt4_Panasonic_B > HCAFF1_HHI_B > HCAMFF1_HHI_B > HCHP3_HHI_A > HPCAFL_BRCM_C > HPCAFLNL_BRCM_C > HVLCFI0_Sony_B > HVLCMFF0_Sony_B > HVLCPFF0_Sony_B > HPCAMAPALQ_BRCM_B > HPCVFL_BRCM_A > HPCVFLNL_BRCM_A > - 2 test vectors failed due to 10bit bitstream: 10bit decoding is not > supported in iris driver > Test Vectors: > FREH10-1 > FREH10-2 > - 21 test vectors failed due to unsupported profile: > V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the > hardware. > Test Vectors: > FREXT1_TANDBERG_A > FREXT2_TANDBERG_A > FREXT3_TANDBERG_A > Hi422FR1_SONY_A > Hi422FR2_SONY_A > Hi422FR3_SONY_A > Hi422FR4_SONY_A > Hi422FR6_SONY_A > Hi422FR7_SONY_A > Hi422FR8_SONY_A > Hi422FR9_SONY_A > Hi422FR10_SONY_A > Hi422FR11_SONY_A > Hi422FR12_SONY_A > Hi422FR13_SONY_A > Hi422FR14_SONY_A > Hi422FR15_SONY_A > Hi422FREXT16_SONY_A > Hi422FREXT17_SONY_A > Hi422FREXT18_SONY_A > Hi422FREXT19_SONY_A > - 2 test vectors failed due to unsupported bitstream. > chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not > supported by the hardware. > Test Vectors: > HPCAMOLQ_BRCM_B > HPCVMOLQ_BRCM_B > > To: Vikash Garodia <quic_vgarodia@quicinc.com> > To: Abhinav Kumar <quic_abhinavk@quicinc.com> > To: Mauro Carvalho Chehab <mchehab@kernel.org> > To: Rob Herring <robh@kernel.org> > To: Krzysztof Kozlowski <krzk+dt@kernel.org> > To: Conor Dooley <conor+dt@kernel.org> > To: Philipp Zabel <p.zabel@pengutronix.de> > Cc: Hans Verkuil <hverkuil@xs4all.nl> > Cc: Sebastian Fricke <sebastian.fricke@collabora.com> > Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Cc: Nicolas Dufresne <nicolas@ndufresne.ca> > Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com> > Cc: Jianhua Lu <lujianhua000@gmail.com> > Cc: Stefan Schmidt <stefan.schmidt@linaro.org> > Cc: linux-media@vger.kernel.org > Cc: linux-arm-msm@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > > Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> > --- > Dikshita Agarwal (18): > dt-bindings: media: Add video support for QCOM SM8550 SoC > media: iris: add platform driver for iris video device > media: iris: implement iris v4l2 file ops > media: iris: introduce iris core state management with shared queues > media: iris: implement video firmware load/unload > media: iris: implement boot sequence of the firmware > media: iris: introduce host firmware interface with necessary hooks > media: iris: implement power management > media: iris: implement reqbuf ioctl with vb2_queue_setup > media: iris: implement iris v4l2_ctrl_ops > media: iris: implement vb2 streaming ops > media: iris: allocate, initialize and queue internal buffers > media: iris: implement vb2 ops for buf_queue and firmware response > media: iris: add support for dynamic resolution change > media: iris: handle streamoff/on from client in dynamic resolution change > media: iris: add support for drain sequence > media: iris: enable video driver probe of SM8250 SoC > media: MAINTAINERS: add Qualcomm iris video accelerator driver > > Vedang Nagar (10): > media: iris: implement s_fmt, g_fmt and try_fmt ioctls > media: iris: implement g_selection ioctl > media: iris: implement enum_fmt and enum_framesizes ioctls > media: iris: implement subscribe_event and unsubscribe_event ioctls > media: iris: implement query_cap ioctl > media: iris: implement set properties to firmware during streamon > media: iris: subscribe parameters and properties to firmware for hfi_gen2 > media: iris: add check whether the video session is supported or not > media: iris: implement power scaling for vpu2 and vpu3 > media: iris: add check to allow sub states transitions > > .../bindings/media/qcom,sm8550-iris.yaml | 158 ++++ > MAINTAINERS | 10 + > drivers/media/platform/qcom/Kconfig | 1 + > drivers/media/platform/qcom/Makefile | 1 + > drivers/media/platform/qcom/iris/Kconfig | 13 + > drivers/media/platform/qcom/iris/Makefile | 27 + > drivers/media/platform/qcom/iris/iris_buffer.c | 623 ++++++++++++++ > drivers/media/platform/qcom/iris/iris_buffer.h | 117 +++ > drivers/media/platform/qcom/iris/iris_core.c | 96 +++ > drivers/media/platform/qcom/iris/iris_core.h | 111 +++ > drivers/media/platform/qcom/iris/iris_ctrls.c | 259 ++++++ > drivers/media/platform/qcom/iris/iris_ctrls.h | 22 + > drivers/media/platform/qcom/iris/iris_firmware.c | 116 +++ > drivers/media/platform/qcom/iris/iris_firmware.h | 15 + > drivers/media/platform/qcom/iris/iris_hfi_common.c | 176 ++++ > drivers/media/platform/qcom/iris/iris_hfi_common.h | 155 ++++ > drivers/media/platform/qcom/iris/iris_hfi_gen1.h | 16 + > .../platform/qcom/iris/iris_hfi_gen1_command.c | 826 ++++++++++++++++++ > .../platform/qcom/iris/iris_hfi_gen1_defines.h | 448 ++++++++++ > .../platform/qcom/iris/iris_hfi_gen1_response.c | 666 ++++++++++++++ > drivers/media/platform/qcom/iris/iris_hfi_gen2.h | 41 + > .../platform/qcom/iris/iris_hfi_gen2_command.c | 957 +++++++++++++++++++++ > .../platform/qcom/iris/iris_hfi_gen2_defines.h | 161 ++++ > .../platform/qcom/iris/iris_hfi_gen2_packet.c | 292 +++++++ > .../platform/qcom/iris/iris_hfi_gen2_packet.h | 125 +++ > .../platform/qcom/iris/iris_hfi_gen2_response.c | 934 ++++++++++++++++++++ > drivers/media/platform/qcom/iris/iris_hfi_queue.c | 314 +++++++ > drivers/media/platform/qcom/iris/iris_hfi_queue.h | 182 ++++ > drivers/media/platform/qcom/iris/iris_instance.h | 77 ++ > .../platform/qcom/iris/iris_platform_common.h | 186 ++++ > .../platform/qcom/iris/iris_platform_sm8250.c | 148 ++++ > .../platform/qcom/iris/iris_platform_sm8550.c | 265 ++++++ > drivers/media/platform/qcom/iris/iris_power.c | 140 +++ > drivers/media/platform/qcom/iris/iris_power.h | 13 + > drivers/media/platform/qcom/iris/iris_probe.c | 378 ++++++++ > drivers/media/platform/qcom/iris/iris_resources.c | 131 +++ > drivers/media/platform/qcom/iris/iris_resources.h | 18 + > drivers/media/platform/qcom/iris/iris_state.c | 276 ++++++ > drivers/media/platform/qcom/iris/iris_state.h | 144 ++++ > drivers/media/platform/qcom/iris/iris_utils.c | 90 ++ > drivers/media/platform/qcom/iris/iris_utils.h | 53 ++ > drivers/media/platform/qcom/iris/iris_vb2.c | 335 ++++++++ > drivers/media/platform/qcom/iris/iris_vb2.h | 19 + > drivers/media/platform/qcom/iris/iris_vdec.c | 659 ++++++++++++++ > drivers/media/platform/qcom/iris/iris_vdec.h | 25 + > drivers/media/platform/qcom/iris/iris_vidc.c | 453 ++++++++++ > drivers/media/platform/qcom/iris/iris_vidc.h | 15 + > drivers/media/platform/qcom/iris/iris_vpu2.c | 38 + > drivers/media/platform/qcom/iris/iris_vpu3.c | 122 +++ > drivers/media/platform/qcom/iris/iris_vpu_buffer.c | 270 ++++++ > drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 91 ++ > drivers/media/platform/qcom/iris/iris_vpu_common.c | 369 ++++++++ > drivers/media/platform/qcom/iris/iris_vpu_common.h | 28 + > .../platform/qcom/iris/iris_vpu_register_defines.h | 17 + > 54 files changed, 11222 insertions(+) > --- > base-commit: 698b6e3163bafd61e1b7d13572e2c42974ac85ec > change-id: 20241028-qcom-video-iris-94d5a12e6d9e > > Best regards, Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Thanks, Neil
Introduce support for Qualcomm new video acceleration hardware i.e. iris, used for video stream decoding. Iris is a multi pipe based hardware that offloads video stream decoding from the application processor (AP). It supports H.264 decoding. The AP communicates with hardware through a well defined protocol, called as host firmware interface (HFI), which provides fine-grained and asynchronous control over individual hardware features. This driver implements upgraded HFI gen2 to communicate with firmware. It supports SM8550 which is based out of HFI gen 2. It also supports SM8250 which is based out of HFI gen1. This driver comes with below capabilities: - V4L2 complaint video driver with M2M and STREAMING capability. - Supports H264 decoder. This driver comes with below features: - Centralized resource management. - Centralized management of core and instance states. - Defines platform specific capabilities and features. As a results, it provides a single point of control to enable/disable a given feature depending on specific platform capabilities. - Handles various video recommended sequences, like DRC, Drain, Seek, EOS. - Implements asynchronous communication with hardware to achieve better experience in low latency usecases. - Output and capture planes are controlled independently. Thereby providing a way to reconfigure individual plane. - Native hardware support of LAST flag which is mandatory to align with port reconfiguration and DRAIN sequence as per V4L guidelines. Changes since v8: - re-order supported profile for h264 (Stefan) - move mapping of DEBLOCK cap to patch#14 (Stefan, Dmitry) - add a way to read the firmware path from dtsi and fallback to resource data if not available (dikshita) - Link to v8: https://lore.kernel.org/r/20241210-qcom-video-iris-v8-0-42c5403cb1a3@quicinc.com Changes since v7: - Added HFI_ERROR_STREAM_UNSUPPORTED define to inform about session error (Stefan) - Fixed kernel doc issues - Link to v7: https://lore.kernel.org/r/20241209-qcom-video-iris-v7-0-05c6bdead47b@quicinc.com Changes since v6: - Added vb2_is_busy check in s_fmt (Hans) - Removed q->streaming checks in s_fmt (Hans) - Removed usage of inst->subscriptions (Hans) - Added call to v4l2_m2m_ioctl_decoder_cmd() from iris_dec_cmd() API (Hans) - Fixed issues related to kernel docs. - Addressed all other review comments. - Link to v6: https://lore.kernel.org/r/20241120-qcom-video-iris-v6-0-a8cf6704e992@quicinc.com Changes since v5: - Fixed the memory leak in firmware load (Bryan) - Updated all headers s/_LIKE_SO_/__LIKE_SO__ (Bryan) - Updated value of IFACEQ_MAX_BUF_COUNT to 64 (Bryan) - Removed actual_count from iris buffer structure and cleaned up vb2_queue_setup (Hans) - Used VIDEO_MAX_FRAME to set actual buffer to firmware (Hans) - Fixed the typo in commit log and subject of patch#12 (Hans) - Updated card field to Iris Decoder (Hans) - Removed redundant setting of byteused (Hans) - s/iris_driver/is_iris_driver (Jianhua) - Addressed all other review comments. - Link to v5: https://lore.kernel.org/r/20241105-qcom-video-iris-v5-0-a88e7c220f78@quicinc.com Changes since v4: - Fixed commit message length for all patches (Krzysztof) - Migrated back to remove from remove_new (Uwe Kleine-König) - Removed support for g_volatle_ctrl (Hans) - Added changes to update minimum buffer count whenever the hardware requirement changes (Hans) - Removed state checks from try/g/s_fmt ioctls (Hans) - Removed wait_prepare() and wait_finish callbacks (Hans) - Added support for remove_bufs (Hans) - Added module param based configurability to select between venus and iris drivers for platforms supported by both drivers (Jianhua, Dmitry) - Addressed misc other review comments from Hans. - Fixed issues reported by kernel bot. - Link to v4: https://lore.kernel.org/r/20241014-qcom-video-iris-v4-v4-0-c5eaa4e9ab9e@quicinc.com Changes since v3: - Fixed the style issues with dt binding (Krzysztof) - Pushed the patch to add maintainers to end of the series (Krzysztof, Dmitry) - Moved the resource initialization next to probe in iris_probe.c and squashed the patch of probe and resource initialization (Krzysztof) - Removed error prints from probe function (Krzysztof) - Defined bit fields used for register read/write with macros for better context (Bryan) - Converted if/else to switch/case wherever applicable (Bryan) - Removed defensive NULL checks wherever not required (Bryan, Krzysztof) - Removed core->state checks except for below scenarios (Bryan) - When reverse thread (firmware) can move the state of the core to error state. - When client can force close the driver and there are still pending firmware responses to be read from shared queues (msg and dbg) - For PM operations, since its a delayed autosuspend work and sys error handler from the reverse thread can move the state to core deinit state anytime. - Acquiring core->lock only for below scenarios (Bryan) - Writing to registers. - Reading/Writing from/to shared queues. - Traversing the instance list of core. - To protect the core->state when it can changed by reverse thread. - Acquiring inst->lock only for below scenario which is needed (Bryan) - Serializing the forward and reverse thread - To protect the inst structure where the values can be modified by firmware. - Removed usage of core->power_enabled (Krzysztof, Bryan) - Removed usage of mutex_is_locked (Krzysztof, Bryan) - Use C structure for instance caps (Dmitry) - Split the ctrl ops patch by keeping only the defines, struct and caps needed to intialize the ctrl handler and to implement s/g_ctrl (Dmitry) - Removed the instance state checks to allow v4l2-ctl, relying on standard vb2 checks instead. (Hans) - Converted APIs to void wherever applicable except for below (Bryan) - iris_hfi_gen2_handle_session_error and iris_hfi_gen2_handle_session_property cannot be converted to void even though they always return 0. Because these are two of the handlers invoked from iris_hfi_gen2_handle_session_response and are of iris_hfi_gen2_inst_hfi_range struct type, where same prototype is followed for all handlers and return type of all handers should be 'int'. And we cannot have a switch case/if else to handle these responses from firmware because we need to parse the responses in a particular sequence. That's why we opted for this handler based design instead of introducing multiple for loop with code duplication. - Fixed issues reported by kernel bot. - Fixed v4l2 compliance issue reported with "-s" options based on the inputs from Hans. - Addressed all other review comments and made some code improvements. Changes since v2: - introduced support for HFI gen1. - deprecated Encoder and HEVC, VP9 codecs. - removed custom vb2 mem ops and used standard framework instead. - added support for mmap streaming mode. - migrated all the buffer APIs to mem2mem helper functions. - registered iris buffer with vb2 framework. - migrated to clk_bulk, reset_bulk and icc_bulk APIs. - used pm_domain_attach/detach_list APIs. - migrated to read/writel and other available helpers for register access instead of custom wrappers. - added documentation for various structures. - addressed many other review comments from v2. Note: A harmless onetime error log "Lucid PLL latch failed. Output may be unstable!" is seen during bootup. It doesn't impact any video usecase and is currently under discussion. Static tools like checkpatch, smatch, dt_binding_check, sparse and Coccinelle run successfully with this driver. This driver is tested with v4l2-ctl[1] and Gstreamer[2]. [1]: v4l2-ctl --verbose --set-fmt-video-out=pixelformat=H264 --set-fmt-video=pixelformat=NV12 --stream-mmap --stream-out-mmap --stream-from /media/FVDO_Freeway_720p.264 --stream-to out.NV12 [2]: gst-launch-1.0 filesrc location=/media/media/4k_decode_clip.264 ! h264parse ! v4l2h264dec capture-io-mode=dmabuf ! kmssink The driver is tested with v4l2-compliance. Result on SM8550: v4l2-compliance --stream-from /media/FVDO_Freeway_720p.264 -s250 v4l2-compliance 1.29.0-5273, 64 bits, 64-bit time_t v4l2-compliance SHA: 0ed98432fe68 2024-11-13 12:54:45 Compliance test for iris_driver device /dev/video0: Driver Info: Driver name : iris_driver Card type : iris_decoder Bus info : platform:aa00000.video-codec Driver version : 6.12.0 Capabilities : 0x84204000 Video Memory-to-Memory Multiplanar Streaming Extended Pix Format Device Capabilities Device Caps : 0x04204000 Video Memory-to-Memory Multiplanar Streaming Extended Pix Format Detected Stateful Decoder Required ioctls: test VIDIOC_QUERYCAP: OK test invalid ioctls: OK Allow for multiple opens: test second /dev/video0 open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 5 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK test Composing: OK test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test CREATE_BUFS maximum buffers: OK test VIDIOC_REMOVE_BUFS: OK test VIDIOC_EXPBUF: OK test Requests: OK (Not Supported) test blocking wait: OK Test input 0: Streaming ioctls: test read/write: OK (Not Supported) test MMAP (select, REQBUFS): OK test MMAP (epoll, REQBUFS): OK test MMAP (select, CREATE_BUFS): OK test MMAP (epoll, CREATE_BUFS): OK test USERPTR (select): OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0, Warnings: 0 Result on SM8250: v4l2-compliance --stream-from /media/FVDO_Freeway_720p.264 -s250 v4l2-compliance 1.29.0-5273, 64 bits, 64-bit time_t v4l2-compliance SHA: 0ed98432fe68 2024-11-13 12:54:45 Compliance test for iris_driver device /dev/video0: Driver Info: Driver name : iris_driver Card type : iris_decoder Bus info : platform:aa00000.video-codec Driver version : 6.12.0 Capabilities : 0x84204000 Video Memory-to-Memory Multiplanar Streaming Extended Pix Format Device Capabilities Device Caps : 0x04204000 Video Memory-to-Memory Multiplanar Streaming Extended Pix Format Detected Stateful Decoder Required ioctls: test VIDIOC_QUERYCAP: OK test invalid ioctls: OK Allow for multiple opens: test second /dev/video0 open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 5 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK test Composing: OK test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test CREATE_BUFS maximum buffers: OK test VIDIOC_REMOVE_BUFS: OK test VIDIOC_EXPBUF: OK test Requests: OK (Not Supported) test blocking wait: OK Test input 0: Streaming ioctls: test read/write: OK (Not Supported) test MMAP (select, REQBUFS): OK test MMAP (epoll, REQBUFS): OK test MMAP (select, CREATE_BUFS): OK test MMAP (epoll, CREATE_BUFS): OK test USERPTR (select): OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0, Warnings: 0 The result of fluster test on SM8550: 77/135 while testing JVT-AVC_V1 with GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1. The failing tests are: - 52 test vectors failed due to interlaced clips: Interlaced decoding is not supported in iris driver. Test Vectors: cabac_mot_fld0_full cabac_mot_mbaff0_full cabac_mot_picaff0_full CABREF3_Sand_D CAFI1_SVA_C CAMA1_Sony_C CAMA1_TOSHIBA_B cama1_vtc_c cama2_vtc_b CAMA3_Sand_E cama3_vtc_b CAMACI3_Sony_C CAMANL1_TOSHIBA_B CAMANL2_TOSHIBA_B CAMANL3_Sand_E CAMASL3_Sony_B CAMP_MOT_MBAFF_L30 CAMP_MOT_MBAFF_L31 CANLMA2_Sony_C CANLMA3_Sony_C CAPA1_TOSHIBA_B CAPAMA3_Sand_F cavlc_mot_fld0_full_B cavlc_mot_mbaff0_full_B cavlc_mot_picaff0_full_B CVCANLMA2_Sony_C CVFI1_Sony_D CVFI1_SVA_C CVFI2_Sony_H CVFI2_SVA_C CVMA1_Sony_D CVMA1_TOSHIBA_B CVMANL1_TOSHIBA_B CVMANL2_TOSHIBA_B CVMAPAQP3_Sony_E CVMAQP2_Sony_G CVMAQP3_Sony_D CVMP_MOT_FLD_L30_B CVNLFI1_Sony_C CVNLFI2_Sony_H CVPA1_TOSHIBA_B FI1_Sony_E MR6_BT_B MR7_BT_B MR8_BT_B MR9_BT_B Sharp_MP_Field_1_B Sharp_MP_Field_2_B Sharp_MP_Field_3_B Sharp_MP_PAFF_1r2 Sharp_MP_PAFF_2r CVMP_MOT_FRM_L31_B - 3 test vectors failed due to unsupported bitstream. num_slice_group_minus1 greater than zero is not supported by the hardware. Test Vectors: FM1_BT_B FM1_FT_E FM2_SVA_C - 2 test vectors failed because SP_SLICE type is not supported by the hardware. Test Vectors: SP1_BT_A sp2_bt_b - 1 test vector failed due to unsupported profile: V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED is being deprecated from sm8550 onwards due to hardware issues. Test Vectors: BA3_SVA_C 23/69 while testing JVT-FR-EXT with GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1. The failing tests are: - 21 test vectors failed due to interlaced clips: Interlaced decoding is not supported in iris driver. Test Vectors: brcm_freh4 brcm_freh5 brcm_freh6 brcm_freh10 brcm_freh11 freh7_b FREXT01_JVC_D FREXT02_JVC_C FRExt2_Panasonic_C FRExt4_Panasonic_B HCAFF1_HHI_B HCAMFF1_HHI_B HCHP3_HHI_A HPCAFL_BRCM_C HPCAFLNL_BRCM_C HVLCFI0_Sony_B HVLCMFF0_Sony_B HVLCPFF0_Sony_B HPCAMAPALQ_BRCM_B HPCVFL_BRCM_A HPCVFLNL_BRCM_A - 2 test vectors failed due to 10bit bitstream: 10bit decoding is not supported in iris driver Test Vectors: FREH10-1 FREH10-2 - 21 test vectors failed due to unsupported profile: V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the hardware. Test Vectors: FREXT1_TANDBERG_A FREXT2_TANDBERG_A FREXT3_TANDBERG_A Hi422FR1_SONY_A Hi422FR2_SONY_A Hi422FR3_SONY_A Hi422FR4_SONY_A Hi422FR6_SONY_A Hi422FR7_SONY_A Hi422FR8_SONY_A Hi422FR9_SONY_A Hi422FR10_SONY_A Hi422FR11_SONY_A Hi422FR12_SONY_A Hi422FR13_SONY_A Hi422FR14_SONY_A Hi422FR15_SONY_A Hi422FREXT16_SONY_A Hi422FREXT17_SONY_A Hi422FREXT18_SONY_A Hi422FREXT19_SONY_A - 2 test vectors failed due to unsupported bitstream. chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not supported by the hardware. Test Vectors: HPCAMOLQ_BRCM_B HPCVMOLQ_BRCM_B The result of fluster test on SM8250: 78/135 while testing JVT-AVC_V1 with GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1. The failing tests are: - 52 test vectors failed due to interlaced clips: Interlaced decoding is not supported in iris driver. Test Vectors: cabac_mot_fld0_full cabac_mot_mbaff0_full cabac_mot_picaff0_full CABREF3_Sand_D CAFI1_SVA_C CAMA1_Sony_C CAMA1_TOSHIBA_B cama1_vtc_c cama2_vtc_b CAMA3_Sand_E cama3_vtc_b CAMACI3_Sony_C CAMANL1_TOSHIBA_B CAMANL2_TOSHIBA_B CAMANL3_Sand_E CAMASL3_Sony_B CAMP_MOT_MBAFF_L30 CAMP_MOT_MBAFF_L31 CANLMA2_Sony_C CANLMA3_Sony_C CAPA1_TOSHIBA_B CAPAMA3_Sand_F cavlc_mot_fld0_full_B cavlc_mot_mbaff0_full_B cavlc_mot_picaff0_full_B CVCANLMA2_Sony_C CVFI1_Sony_D CVFI1_SVA_C CVFI2_Sony_H CVFI2_SVA_C CVMA1_Sony_D CVMA1_TOSHIBA_B CVMANL1_TOSHIBA_B CVMANL2_TOSHIBA_B CVMAPAQP3_Sony_E CVMAQP2_Sony_G CVMAQP3_Sony_D CVMP_MOT_FLD_L30_B CVNLFI1_Sony_C CVNLFI2_Sony_H CVPA1_TOSHIBA_B FI1_Sony_E MR6_BT_B MR7_BT_B MR8_BT_B MR9_BT_B Sharp_MP_Field_1_B Sharp_MP_Field_2_B Sharp_MP_Field_3_B Sharp_MP_PAFF_1r2 Sharp_MP_PAFF_2r CVMP_MOT_FRM_L31_B - 3 test vectors failed due to unsupported bitstream. num_slice_group_minus1 greater than zero is not supported by the hardware. Test Vectors: FM1_BT_B FM1_FT_E FM2_SVA_C - 2 test vectors failed because SP_SLICE type is not supported by the hardware. Test Vectors: SP1_BT_A sp2_bt_b 23/69 while testing JVT-FR-EXT with GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1. The failing tests are: - 21 test vectors failed due to interlaced clips: Interlaced decoding is not supported in iris driver. Test Vectors: brcm_freh4 brcm_freh5 brcm_freh6 brcm_freh10 brcm_freh11 freh7_b FREXT01_JVC_D FREXT02_JVC_C FRExt2_Panasonic_C FRExt4_Panasonic_B HCAFF1_HHI_B HCAMFF1_HHI_B HCHP3_HHI_A HPCAFL_BRCM_C HPCAFLNL_BRCM_C HVLCFI0_Sony_B HVLCMFF0_Sony_B HVLCPFF0_Sony_B HPCAMAPALQ_BRCM_B HPCVFL_BRCM_A HPCVFLNL_BRCM_A - 2 test vectors failed due to 10bit bitstream: 10bit decoding is not supported in iris driver Test Vectors: FREH10-1 FREH10-2 - 21 test vectors failed due to unsupported profile: V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the hardware. Test Vectors: FREXT1_TANDBERG_A FREXT2_TANDBERG_A FREXT3_TANDBERG_A Hi422FR1_SONY_A Hi422FR2_SONY_A Hi422FR3_SONY_A Hi422FR4_SONY_A Hi422FR6_SONY_A Hi422FR7_SONY_A Hi422FR8_SONY_A Hi422FR9_SONY_A Hi422FR10_SONY_A Hi422FR11_SONY_A Hi422FR12_SONY_A Hi422FR13_SONY_A Hi422FR14_SONY_A Hi422FR15_SONY_A Hi422FREXT16_SONY_A Hi422FREXT17_SONY_A Hi422FREXT18_SONY_A Hi422FREXT19_SONY_A - 2 test vectors failed due to unsupported bitstream. chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not supported by the hardware. Test Vectors: HPCAMOLQ_BRCM_B HPCVMOLQ_BRCM_B To: Vikash Garodia <quic_vgarodia@quicinc.com> To: Abhinav Kumar <quic_abhinavk@quicinc.com> To: Mauro Carvalho Chehab <mchehab@kernel.org> To: Rob Herring <robh@kernel.org> To: Krzysztof Kozlowski <krzk+dt@kernel.org> To: Conor Dooley <conor+dt@kernel.org> To: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Sebastian Fricke <sebastian.fricke@collabora.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Nicolas Dufresne <nicolas@ndufresne.ca> Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Cc: Jianhua Lu <lujianhua000@gmail.com> Cc: Stefan Schmidt <stefan.schmidt@linaro.org> Cc: linux-media@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> --- Dikshita Agarwal (18): dt-bindings: media: Add video support for QCOM SM8550 SoC media: iris: add platform driver for iris video device media: iris: implement iris v4l2 file ops media: iris: introduce iris core state management with shared queues media: iris: implement video firmware load/unload media: iris: implement boot sequence of the firmware media: iris: introduce host firmware interface with necessary hooks media: iris: implement power management media: iris: implement reqbuf ioctl with vb2_queue_setup media: iris: implement iris v4l2_ctrl_ops media: iris: implement vb2 streaming ops media: iris: allocate, initialize and queue internal buffers media: iris: implement vb2 ops for buf_queue and firmware response media: iris: add support for dynamic resolution change media: iris: handle streamoff/on from client in dynamic resolution change media: iris: add support for drain sequence media: iris: enable video driver probe of SM8250 SoC media: MAINTAINERS: add Qualcomm iris video accelerator driver Vedang Nagar (10): media: iris: implement s_fmt, g_fmt and try_fmt ioctls media: iris: implement g_selection ioctl media: iris: implement enum_fmt and enum_framesizes ioctls media: iris: implement subscribe_event and unsubscribe_event ioctls media: iris: implement query_cap ioctl media: iris: implement set properties to firmware during streamon media: iris: subscribe parameters and properties to firmware for hfi_gen2 media: iris: add check whether the video session is supported or not media: iris: implement power scaling for vpu2 and vpu3 media: iris: add check to allow sub states transitions .../bindings/media/qcom,sm8550-iris.yaml | 158 ++++ MAINTAINERS | 10 + drivers/media/platform/qcom/Kconfig | 1 + drivers/media/platform/qcom/Makefile | 1 + drivers/media/platform/qcom/iris/Kconfig | 13 + drivers/media/platform/qcom/iris/Makefile | 27 + drivers/media/platform/qcom/iris/iris_buffer.c | 623 ++++++++++++++ drivers/media/platform/qcom/iris/iris_buffer.h | 117 +++ drivers/media/platform/qcom/iris/iris_core.c | 96 +++ drivers/media/platform/qcom/iris/iris_core.h | 111 +++ drivers/media/platform/qcom/iris/iris_ctrls.c | 259 ++++++ drivers/media/platform/qcom/iris/iris_ctrls.h | 22 + drivers/media/platform/qcom/iris/iris_firmware.c | 116 +++ drivers/media/platform/qcom/iris/iris_firmware.h | 15 + drivers/media/platform/qcom/iris/iris_hfi_common.c | 176 ++++ drivers/media/platform/qcom/iris/iris_hfi_common.h | 155 ++++ drivers/media/platform/qcom/iris/iris_hfi_gen1.h | 16 + .../platform/qcom/iris/iris_hfi_gen1_command.c | 826 ++++++++++++++++++ .../platform/qcom/iris/iris_hfi_gen1_defines.h | 448 ++++++++++ .../platform/qcom/iris/iris_hfi_gen1_response.c | 666 ++++++++++++++ drivers/media/platform/qcom/iris/iris_hfi_gen2.h | 41 + .../platform/qcom/iris/iris_hfi_gen2_command.c | 957 +++++++++++++++++++++ .../platform/qcom/iris/iris_hfi_gen2_defines.h | 161 ++++ .../platform/qcom/iris/iris_hfi_gen2_packet.c | 292 +++++++ .../platform/qcom/iris/iris_hfi_gen2_packet.h | 125 +++ .../platform/qcom/iris/iris_hfi_gen2_response.c | 934 ++++++++++++++++++++ drivers/media/platform/qcom/iris/iris_hfi_queue.c | 314 +++++++ drivers/media/platform/qcom/iris/iris_hfi_queue.h | 182 ++++ drivers/media/platform/qcom/iris/iris_instance.h | 77 ++ .../platform/qcom/iris/iris_platform_common.h | 186 ++++ .../platform/qcom/iris/iris_platform_sm8250.c | 148 ++++ .../platform/qcom/iris/iris_platform_sm8550.c | 265 ++++++ drivers/media/platform/qcom/iris/iris_power.c | 140 +++ drivers/media/platform/qcom/iris/iris_power.h | 13 + drivers/media/platform/qcom/iris/iris_probe.c | 378 ++++++++ drivers/media/platform/qcom/iris/iris_resources.c | 131 +++ drivers/media/platform/qcom/iris/iris_resources.h | 18 + drivers/media/platform/qcom/iris/iris_state.c | 276 ++++++ drivers/media/platform/qcom/iris/iris_state.h | 144 ++++ drivers/media/platform/qcom/iris/iris_utils.c | 90 ++ drivers/media/platform/qcom/iris/iris_utils.h | 53 ++ drivers/media/platform/qcom/iris/iris_vb2.c | 335 ++++++++ drivers/media/platform/qcom/iris/iris_vb2.h | 19 + drivers/media/platform/qcom/iris/iris_vdec.c | 659 ++++++++++++++ drivers/media/platform/qcom/iris/iris_vdec.h | 25 + drivers/media/platform/qcom/iris/iris_vidc.c | 453 ++++++++++ drivers/media/platform/qcom/iris/iris_vidc.h | 15 + drivers/media/platform/qcom/iris/iris_vpu2.c | 38 + drivers/media/platform/qcom/iris/iris_vpu3.c | 122 +++ drivers/media/platform/qcom/iris/iris_vpu_buffer.c | 270 ++++++ drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 91 ++ drivers/media/platform/qcom/iris/iris_vpu_common.c | 369 ++++++++ drivers/media/platform/qcom/iris/iris_vpu_common.h | 28 + .../platform/qcom/iris/iris_vpu_register_defines.h | 17 + 54 files changed, 11222 insertions(+) --- base-commit: 698b6e3163bafd61e1b7d13572e2c42974ac85ec change-id: 20241028-qcom-video-iris-94d5a12e6d9e Best regards,