| Message ID | 20241217130714.51406-1-brgl@bgdev.pl (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | power: sequencing: qcom-wcn: explain why we need the WLAN_EN GPIO hack | expand |
On Tue, Dec 17, 2024 at 02:07:14PM +0100, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > With the recent rework of the PCI power control code, the workaround for > the wlan-enable GPIO - where we don't set a default (low) state in the > power sequencing driver, but instead request the pin as-is - should no > longer be needed but some platforms still fail to probe the WLAN > controller. This is caused by the Qcom PCIe controller and needs a > workaround in the controller driver so add a FIXME to eventually remove > the hack from this driver once this is done. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- > drivers/power/sequencing/pwrseq-qcom-wcn.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c > index cc03b5aaa8f2..9d6a68ac719f 100644 > --- a/drivers/power/sequencing/pwrseq-qcom-wcn.c > +++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c > @@ -396,6 +396,14 @@ static int pwrseq_qcom_wcn_probe(struct platform_device *pdev) > return dev_err_probe(dev, PTR_ERR(ctx->bt_gpio), > "Failed to get the Bluetooth enable GPIO\n"); > > + /* > + * FIXME: This should actually be GPIOD_OUT_LOW. The driver model can > + * correctly handle provider <-> consumer dependencies but there is a > + * known issue with Qcom PCIe controllers where, if the device is > + * powered off abrubtly (without controller driver noticing), the PCIe > + * link moves to link down state. Until the link-down handling is > + * addressed in the controller driver, we need to keep this workaround. Maybe we should add some info on how GPIOD_OUT_LOW causes link down. Like, /* * FIXME: This should actually be GPIOD_OUT_LOW. But doing so would * cause the WLAN power to be toggled, resulting in PCIe link down. * Since the PCIe controller driver is not handling link down currently, * the device becomes unusable. So we need to keep this workaround until * the link down handling is implemented in the controller driver. */ But the comment applies to gpiod_direction_output() call as well, right? - Mani
On Tue, Dec 17, 2024 at 3:03 PM Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote: > > On Tue, Dec 17, 2024 at 02:07:14PM +0100, Bartosz Golaszewski wrote: > > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > > > With the recent rework of the PCI power control code, the workaround for > > the wlan-enable GPIO - where we don't set a default (low) state in the > > power sequencing driver, but instead request the pin as-is - should no > > longer be needed but some platforms still fail to probe the WLAN > > controller. This is caused by the Qcom PCIe controller and needs a > > workaround in the controller driver so add a FIXME to eventually remove > > the hack from this driver once this is done. > > > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > --- > > drivers/power/sequencing/pwrseq-qcom-wcn.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c > > index cc03b5aaa8f2..9d6a68ac719f 100644 > > --- a/drivers/power/sequencing/pwrseq-qcom-wcn.c > > +++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c > > @@ -396,6 +396,14 @@ static int pwrseq_qcom_wcn_probe(struct platform_device *pdev) > > return dev_err_probe(dev, PTR_ERR(ctx->bt_gpio), > > "Failed to get the Bluetooth enable GPIO\n"); > > > > + /* > > + * FIXME: This should actually be GPIOD_OUT_LOW. The driver model can > > + * correctly handle provider <-> consumer dependencies but there is a > > + * known issue with Qcom PCIe controllers where, if the device is > > + * powered off abrubtly (without controller driver noticing), the PCIe > > + * link moves to link down state. Until the link-down handling is > > + * addressed in the controller driver, we need to keep this workaround. > > Maybe we should add some info on how GPIOD_OUT_LOW causes link down. Like, > Sure. > /* > * FIXME: This should actually be GPIOD_OUT_LOW. But doing so would > * cause the WLAN power to be toggled, resulting in PCIe link down. > * Since the PCIe controller driver is not handling link down currently, > * the device becomes unusable. So we need to keep this workaround until > * the link down handling is implemented in the controller driver. > */ > > But the comment applies to gpiod_direction_output() call as well, right? > Yes, but there is already a comment above it. Bartosz
diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c index cc03b5aaa8f2..9d6a68ac719f 100644 --- a/drivers/power/sequencing/pwrseq-qcom-wcn.c +++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c @@ -396,6 +396,14 @@ static int pwrseq_qcom_wcn_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(ctx->bt_gpio), "Failed to get the Bluetooth enable GPIO\n"); + /* + * FIXME: This should actually be GPIOD_OUT_LOW. The driver model can + * correctly handle provider <-> consumer dependencies but there is a + * known issue with Qcom PCIe controllers where, if the device is + * powered off abrubtly (without controller driver noticing), the PCIe + * link moves to link down state. Until the link-down handling is + * addressed in the controller driver, we need to keep this workaround. + */ ctx->wlan_gpio = devm_gpiod_get_optional(dev, "wlan-enable", GPIOD_ASIS); if (IS_ERR(ctx->wlan_gpio))