Message ID | 20241212-usb-orientation-v1-1-0b69adf05f37@chromium.org (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | dt-bindings: usb: usb-device: Add panel-location | expand |
On Thu, Dec 12, 2024 at 09:44:37PM +0000, Ricardo Ribalda wrote: > For some devices like cameras the system needs to know where they are > mounted. Why do you need this and why only this property and not the dozens others ACPI has? > > ACPI has a property for this purpose, which is parsed by > acpi_get_physical_device_location(): > https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html#pld-physical-location-of-device > > In DT we have similar property for video-interface-devices called > orientation, but it is limited to the requirements of video devices: > Documentation/devicetree/bindings/media/video-interface-devices.yaml > > Add a new property for usb-devices that matches the behavior of > ACPI's _PLD. > > Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> > --- > Documentation/devicetree/bindings/usb/usb-device.yaml | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml > index da890ee60ce6..1ce79c1c3b31 100644 > --- a/Documentation/devicetree/bindings/usb/usb-device.yaml > +++ b/Documentation/devicetree/bindings/usb/usb-device.yaml > @@ -42,6 +42,20 @@ properties: > port to which this device is attached. The range is 1-255. > maxItems: 1 > > + panel-location: > + description: Describes which panel surface of the system's housing the USB > + device resides on. It has the same meaning as the `ACPI`'s `_PLD` Panel > + object. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: > + - 0 # Top. > + - 1 # Bottom. > + - 2 # Left. > + - 3 # Right. > + - 4 # Front (aka as User Facing). > + - 5 # Back (aka as World Facing). > + - 6 # Unknown. > + > "#address-cells": > description: should be 1 for hub nodes with device nodes, > should be 2 for device nodes with interface nodes. > > --- > base-commit: eefa7a9c069908412f8f5d15833901d1b46ae1b2 > change-id: 20241212-usb-orientation-8e3717ebb02a > > Best regards, > -- > Ricardo Ribalda <ribalda@chromium.org> >
Hi Rob On Tue, 17 Dec 2024 at 16:02, Rob Herring <robh@kernel.org> wrote: > > On Thu, Dec 12, 2024 at 09:44:37PM +0000, Ricardo Ribalda wrote: > > For some devices like cameras the system needs to know where they are > > mounted. > > Why do you need this and why only this property and not the dozens > others ACPI has? Userspace needs that information to correctly show it in the UI. Eg; - User facing camera needs to be mirrored during preview. - The user facing camera is selected by default during videoconferences - The world facing camera is selected by default when taking a photo - User facing camera have different parameter defaults than world facing. Right now, the only camera driver that expose the ACPI location information is the IPU from intel https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/media/pci/intel/ipu-bridge.c#n258 And they are only using the panel. If we need more information we can consider adding more parameters in the future. > > > > > ACPI has a property for this purpose, which is parsed by > > acpi_get_physical_device_location(): > > https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html#pld-physical-location-of-device > > > > In DT we have similar property for video-interface-devices called > > orientation, but it is limited to the requirements of video devices: > > Documentation/devicetree/bindings/media/video-interface-devices.yaml > > > > Add a new property for usb-devices that matches the behavior of > > ACPI's _PLD. > > > > Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> > > --- > > Documentation/devicetree/bindings/usb/usb-device.yaml | 14 ++++++++++++++ > > 1 file changed, 14 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml > > index da890ee60ce6..1ce79c1c3b31 100644 > > --- a/Documentation/devicetree/bindings/usb/usb-device.yaml > > +++ b/Documentation/devicetree/bindings/usb/usb-device.yaml > > @@ -42,6 +42,20 @@ properties: > > port to which this device is attached. The range is 1-255. > > maxItems: 1 > > > > + panel-location: > > + description: Describes which panel surface of the system's housing the USB > > + device resides on. It has the same meaning as the `ACPI`'s `_PLD` Panel > > + object. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + enum: > > + - 0 # Top. > > + - 1 # Bottom. > > + - 2 # Left. > > + - 3 # Right. > > + - 4 # Front (aka as User Facing). > > + - 5 # Back (aka as World Facing). > > + - 6 # Unknown. > > + > > "#address-cells": > > description: should be 1 for hub nodes with device nodes, > > should be 2 for device nodes with interface nodes. > > > > --- > > base-commit: eefa7a9c069908412f8f5d15833901d1b46ae1b2 > > change-id: 20241212-usb-orientation-8e3717ebb02a > > > > Best regards, > > -- > > Ricardo Ribalda <ribalda@chromium.org> > >
On Tue, Dec 17, 2024 at 04:24:27PM +0100, Ricardo Ribalda wrote: > Hi Rob > > On Tue, 17 Dec 2024 at 16:02, Rob Herring <robh@kernel.org> wrote: > > > > On Thu, Dec 12, 2024 at 09:44:37PM +0000, Ricardo Ribalda wrote: > > > For some devices like cameras the system needs to know where they are > > > mounted. > > > > Why do you need this and why only this property and not the dozens > > others ACPI has? > > Userspace needs that information to correctly show it in the UI. Eg; > > - User facing camera needs to be mirrored during preview. > - The user facing camera is selected by default during videoconferences > - The world facing camera is selected by default when taking a photo > - User facing camera have different parameter defaults than world facing. We already have "orientation" defined for this purpose. > > Right now, the only camera driver that expose the ACPI location > information is the IPU from intel > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/media/pci/intel/ipu-bridge.c#n258 > > And they are only using the panel. > > If we need more information we can consider adding more parameters in > the future.
Hello, On Thu, Dec 19, 2024 at 06:24:53AM -0600, Rob Herring wrote: > On Tue, Dec 17, 2024 at 04:24:27PM +0100, Ricardo Ribalda wrote: > > Hi Rob > > > > On Tue, 17 Dec 2024 at 16:02, Rob Herring <robh@kernel.org> wrote: > > > > > > On Thu, Dec 12, 2024 at 09:44:37PM +0000, Ricardo Ribalda wrote: > > > > For some devices like cameras the system needs to know where they are > > > > mounted. > > > > > > Why do you need this and why only this property and not the dozens > > > others ACPI has? > > > > Userspace needs that information to correctly show it in the UI. Eg; > > > > - User facing camera needs to be mirrored during preview. > > - The user facing camera is selected by default during videoconferences > > - The world facing camera is selected by default when taking a photo > > - User facing camera have different parameter defaults than world facing. > > We already have "orientation" defined for this purpose. I was thinking of the same. It's defined (for cameras) in Documentation/devicetree/bindings/media/video-interface-devices.yaml . > > > > > Right now, the only camera driver that expose the ACPI location > > information is the IPU from intel > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/media/pci/intel/ipu-bridge.c#n258 > > > > And they are only using the panel. > > > > If we need more information we can consider adding more parameters in > > the future.
On Thu, 19 Dec 2024 at 13:24, Rob Herring <robh@kernel.org> wrote: > > On Tue, Dec 17, 2024 at 04:24:27PM +0100, Ricardo Ribalda wrote: > > Hi Rob > > > > On Tue, 17 Dec 2024 at 16:02, Rob Herring <robh@kernel.org> wrote: > > > > > > On Thu, Dec 12, 2024 at 09:44:37PM +0000, Ricardo Ribalda wrote: > > > > For some devices like cameras the system needs to know where they are > > > > mounted. > > > > > > Why do you need this and why only this property and not the dozens > > > others ACPI has? > > > > Userspace needs that information to correctly show it in the UI. Eg; > > > > - User facing camera needs to be mirrored during preview. > > - The user facing camera is selected by default during videoconferences > > - The world facing camera is selected by default when taking a photo > > - User facing camera have different parameter defaults than world facing. > > We already have "orientation" defined for this purpose. Do you mean orientation from bindings/media/video-interface-devices.yaml ? I see a couple of issues: - Orientation has a very specific meaning for USB typeC. I'd prefer if we could avoid using that word. - For other applications different than cameras it might be useful to know the positions top, bottom, left, right, which are not available in video-interface-devices - The value "external" does not makes too much sense for listed usb devices - It makes our lives easier if dt and acpi have the same meaning (less conversion) All that said, for my specific usecase, reusing orientation from bindings/media/video-interface-devices.yaml works... So if that is what you all prefer I can send a v2 with that. Let me know what you think > > > > > Right now, the only camera driver that expose the ACPI location > > information is the IPU from intel > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/media/pci/intel/ipu-bridge.c#n258 > > > > And they are only using the panel. > > > > If we need more information we can consider adding more parameters in > > the future.
On Thu, Dec 19, 2024 at 6:42 AM Ricardo Ribalda <ribalda@chromium.org> wrote: > > On Thu, 19 Dec 2024 at 13:24, Rob Herring <robh@kernel.org> wrote: > > > > On Tue, Dec 17, 2024 at 04:24:27PM +0100, Ricardo Ribalda wrote: > > > Hi Rob > > > > > > On Tue, 17 Dec 2024 at 16:02, Rob Herring <robh@kernel.org> wrote: > > > > > > > > On Thu, Dec 12, 2024 at 09:44:37PM +0000, Ricardo Ribalda wrote: > > > > > For some devices like cameras the system needs to know where they are > > > > > mounted. > > > > > > > > Why do you need this and why only this property and not the dozens > > > > others ACPI has? > > > > > > Userspace needs that information to correctly show it in the UI. Eg; > > > > > > - User facing camera needs to be mirrored during preview. > > > - The user facing camera is selected by default during videoconferences > > > - The world facing camera is selected by default when taking a photo > > > - User facing camera have different parameter defaults than world facing. > > > > We already have "orientation" defined for this purpose. > > Do you mean orientation from > bindings/media/video-interface-devices.yaml ? > > I see a couple of issues: > - Orientation has a very specific meaning for USB typeC. I'd prefer if > we could avoid using that word. Yes, but this is tied to the class of the device, not the bus. I find defining the position for USB devices confusing. > - For other applications different than cameras it might be useful to > know the positions top, bottom, left, right, which are not available > in video-interface-devices Other devices may need some of the 20 other properties in the ACPI table as well. > - The value "external" does not makes too much sense for listed usb devices Then don't use it. > - It makes our lives easier if dt and acpi have the same meaning (less > conversion) We have little to no input into what ACPI does. If we're just going to copy ACPI, then just use ACPI instead. > All that said, for my specific usecase, reusing orientation from > bindings/media/video-interface-devices.yaml works... So if that is > what you all prefer I can send a v2 with that. > Let me know what you think We already have something for cameras. Use it. Rob
diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml index da890ee60ce6..1ce79c1c3b31 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.yaml +++ b/Documentation/devicetree/bindings/usb/usb-device.yaml @@ -42,6 +42,20 @@ properties: port to which this device is attached. The range is 1-255. maxItems: 1 + panel-location: + description: Describes which panel surface of the system's housing the USB + device resides on. It has the same meaning as the `ACPI`'s `_PLD` Panel + object. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # Top. + - 1 # Bottom. + - 2 # Left. + - 3 # Right. + - 4 # Front (aka as User Facing). + - 5 # Back (aka as World Facing). + - 6 # Unknown. + "#address-cells": description: should be 1 for hub nodes with device nodes, should be 2 for device nodes with interface nodes.
For some devices like cameras the system needs to know where they are mounted. ACPI has a property for this purpose, which is parsed by acpi_get_physical_device_location(): https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html#pld-physical-location-of-device In DT we have similar property for video-interface-devices called orientation, but it is limited to the requirements of video devices: Documentation/devicetree/bindings/media/video-interface-devices.yaml Add a new property for usb-devices that matches the behavior of ACPI's _PLD. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> --- Documentation/devicetree/bindings/usb/usb-device.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+) --- base-commit: eefa7a9c069908412f8f5d15833901d1b46ae1b2 change-id: 20241212-usb-orientation-8e3717ebb02a Best regards,