| Message ID | E1tUmAj-007VXV-Lb@rmk-PC.armlinux.org.uk (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | net: stmmac: clean up and fix EEE implementation | expand |
On Mon, Jan 06, 2025 at 12:25:29PM +0000, Russell King (Oracle) wrote: > Convert stmmac to use phy_eee_rx_clock_stop() to set the PHY receive > clock stop in LPI setting, rather than calling the legacy > phy_init_eee() function. > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index ba6de7b7d572..6b66a25716b0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1079,10 +1079,10 @@ static void stmmac_mac_link_up(struct phylink_config *config, stmmac_mac_set(priv, priv->ioaddr, true); if (phy && priv->dma_cap.eee) { - priv->eee_active = phy->enable_tx_lpi && - phy_init_eee(phy, !(priv->plat->flags & - STMMAC_FLAG_RX_CLK_RUNS_IN_LPI)) >= 0; + phy_eee_rx_clock_stop(phy, !(priv->plat->flags & + STMMAC_FLAG_RX_CLK_RUNS_IN_LPI)); priv->tx_lpi_timer = phy->eee_cfg.tx_lpi_timer; + priv->eee_active = phy->enable_tx_lpi; priv->eee_enabled = stmmac_eee_init(priv); stmmac_set_eee_pls(priv, priv->hw, true); }
Convert stmmac to use phy_eee_rx_clock_stop() to set the PHY receive clock stop in LPI setting, rather than calling the legacy phy_init_eee() function. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)