@@ -45,6 +45,10 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45E9-BE91-3D44E2C707E4");
#define HP_OMEN_EC_THERMAL_PROFILE_TIMER_OFFSET 0x63
#define HP_OMEN_EC_THERMAL_PROFILE_OFFSET 0x95
+#define HP_FAN_SPEED_AUTOMATIC 0x00
+#define HP_POWER_LIMIT_DEFAULT 0x00
+#define HP_POWER_LIMIT_NO_CHANGE 0xFF
+
#define ACPI_AC_CLASS "ac_adapter"
#define zero_if_sup(tmp) (zero_insize_support?0:sizeof(tmp)) // use when zero insize is required
@@ -83,11 +87,16 @@ static const char * const omen_timed_thermal_profile_boards[] = {
"8BAD", "8A42"
};
-/* DMI Board names of Victus laptops */
+/* DMI Board names of Victus 16-d1xxx laptops */
static const char * const victus_thermal_profile_boards[] = {
"8A25"
};
+/* DMI Board names of Victus 16-s1000 laptops */
+static const char * const victus_s_thermal_profile_boards[] = {
+ "8C9C"
+};
+
enum hp_wmi_radio {
HPWMI_WIFI = 0x0,
HPWMI_BLUETOOTH = 0x1,
@@ -147,12 +156,32 @@ enum hp_wmi_commandtype {
HPWMI_THERMAL_PROFILE_QUERY = 0x4c,
};
+struct victus_power_limits {
+ u8 pl1;
+ u8 pl2;
+ u8 pl4;
+ u8 cpu_gpu_concurrent_limit;
+};
+
+struct victus_gpu_power_modes {
+ u8 ctgp_enable;
+ u8 ppab_enable;
+ u8 dstate;
+ u8 gpu_slowdown_temp;
+};
+
enum hp_wmi_gm_commandtype {
- HPWMI_FAN_SPEED_GET_QUERY = 0x11,
- HPWMI_SET_PERFORMANCE_MODE = 0x1A,
- HPWMI_FAN_SPEED_MAX_GET_QUERY = 0x26,
- HPWMI_FAN_SPEED_MAX_SET_QUERY = 0x27,
- HPWMI_GET_SYSTEM_DESIGN_DATA = 0x28,
+ HPWMI_FAN_SPEED_GET_QUERY = 0x11,
+ HPWMI_SET_PERFORMANCE_MODE = 0x1A,
+ HPWMI_FAN_SPEED_MAX_GET_QUERY = 0x26,
+ HPWMI_FAN_SPEED_MAX_SET_QUERY = 0x27,
+ HPWMI_GET_SYSTEM_DESIGN_DATA = 0x28,
+ HPWMI_FAN_COUNT_GET_QUERY = 0x10,
+ HPWMI_GET_GPU_THERMAL_MODES_QUERY = 0x21,
+ HPWMI_SET_GPU_THERMAL_MODES_QUERY = 0x22,
+ HPWMI_SET_POWER_LIMITS_QUERY = 0x29,
+ HPWMI_VICTUS_S_FAN_SPEED_GET_QUERY = 0x2D,
+ HPWMI_FAN_SPEED_SET_QUERY = 0x2E,
};
enum hp_wmi_command {
@@ -211,6 +240,11 @@ enum hp_thermal_profile_victus {
HP_VICTUS_THERMAL_PROFILE_QUIET = 0x03,
};
+enum hp_thermal_profile_victus_s {
+ HP_VICTUS_S_THERMAL_PROFILE_DEFAULT = 0x00,
+ HP_VICTUS_S_THERMAL_PROFILE_PERFORMANCE = 0x01,
+};
+
enum hp_thermal_profile {
HP_THERMAL_PROFILE_PERFORMANCE = 0x00,
HP_THERMAL_PROFILE_DEFAULT = 0x01,
@@ -411,6 +445,26 @@ static int hp_wmi_perform_query(int query, enum hp_wmi_command command,
return ret;
}
+/*
+ * Calling this hp_wmi_get_fan_count_userdefine_trigger function also enables
+ * and/or maintains the laptop in user defined thermal and fan states, instead
+ * of using a fallback state. After a 120 seconds timeout however, the laptop
+ * goes back to its fallback state.
+ */
+static int hp_wmi_get_fan_count_userdefine_trigger(void)
+{
+ u8 fan_data[4] = {};
+ int ret;
+
+ ret = hp_wmi_perform_query(HPWMI_FAN_COUNT_GET_QUERY, HPWMI_GM,
+ &fan_data, sizeof(u8),
+ sizeof(fan_data));
+ if (ret != 0)
+ return -EINVAL;
+
+ return fan_data[0]; /* Others bytes aren't providing fan count */
+}
+
static int hp_wmi_get_fan_speed(int fan)
{
u8 fsh, fsl;
@@ -429,6 +483,23 @@ static int hp_wmi_get_fan_speed(int fan)
return (fsh << 8) | fsl;
}
+static int hp_wmi_get_fan_speed_victus_s(int fan)
+{
+ u8 fan_data[128] = {};
+ int ret;
+
+ if (fan < 0 || fan >= sizeof(fan_data))
+ return -EINVAL;
+
+ ret = hp_wmi_perform_query(HPWMI_VICTUS_S_FAN_SPEED_GET_QUERY,
+ HPWMI_GM, &fan_data, sizeof(u8),
+ sizeof(fan_data));
+ if (ret != 0)
+ return -EINVAL;
+
+ return fan_data[fan] * 100;
+}
+
static int hp_wmi_read_int(int query)
{
int val = 0, ret;
@@ -557,6 +628,30 @@ static int hp_wmi_fan_speed_max_set(int enabled)
return enabled;
}
+static int hp_wmi_fan_speed_reset(void)
+{
+ u8 fan_speed[2] = { HP_FAN_SPEED_AUTOMATIC, HP_FAN_SPEED_AUTOMATIC };
+ int ret;
+
+ ret = hp_wmi_perform_query(HPWMI_FAN_SPEED_SET_QUERY, HPWMI_GM,
+ &fan_speed, sizeof(fan_speed), 0);
+
+ return ret;
+}
+
+static int hp_wmi_fan_speed_max_reset(void)
+{
+ int ret;
+
+ ret = hp_wmi_fan_speed_max_set(0);
+ if (ret)
+ return ret;
+
+ /* Disabling max fan speed on Victus s1xxx laptops needs a 2nd step: */
+ ret = hp_wmi_fan_speed_reset();
+ return ret;
+}
+
static int hp_wmi_fan_speed_max_get(void)
{
int val = 0, ret;
@@ -1472,6 +1567,161 @@ static int platform_profile_victus_set_ec(enum platform_profile_option profile)
return 0;
}
+static bool is_victus_s_thermal_profile(void)
+{
+ const char *board_name;
+
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (!board_name)
+ return false;
+
+ return match_string(victus_s_thermal_profile_boards,
+ ARRAY_SIZE(victus_s_thermal_profile_boards),
+ board_name) >= 0;
+}
+
+static int victus_s_gpu_thermal_profile_get(bool *ctgp_enable,
+ bool *ppab_enable,
+ u8 *dstate,
+ u8 *gpu_slowdown_temp)
+{
+ struct victus_gpu_power_modes gpu_power_modes;
+ int ret;
+
+ ret = hp_wmi_perform_query(HPWMI_GET_GPU_THERMAL_MODES_QUERY, HPWMI_GM,
+ &gpu_power_modes, sizeof(gpu_power_modes),
+ sizeof(gpu_power_modes));
+ if (ret == 0) {
+ *ctgp_enable = gpu_power_modes.ctgp_enable ? true : false;
+ *ppab_enable = gpu_power_modes.ppab_enable ? true : false;
+ *dstate = gpu_power_modes.dstate;
+ *gpu_slowdown_temp = gpu_power_modes.gpu_slowdown_temp;
+ }
+
+ return ret;
+}
+
+static int victus_s_gpu_thermal_profile_set(bool ctgp_enable,
+ bool ppab_enable,
+ u8 dstate)
+{
+ struct victus_gpu_power_modes gpu_power_modes;
+ int ret;
+
+ bool current_ctgp_state, current_ppab_state;
+ u8 current_dstate, current_gpu_slowdown_temp;
+
+ /* Retrieving GPU slowdown temperature, in order to keep it unchanged */
+ ret = victus_s_gpu_thermal_profile_get(¤t_ctgp_state,
+ ¤t_ppab_state,
+ ¤t_dstate,
+ ¤t_gpu_slowdown_temp);
+ if (ret < 0) {
+ pr_warn("GPU modes not updated, unable to get slowdown temp\n");
+ return ret;
+ }
+
+ gpu_power_modes.ctgp_enable = ctgp_enable ? 0x01 : 0x00;
+ gpu_power_modes.ppab_enable = ppab_enable ? 0x01 : 0x00;
+ gpu_power_modes.dstate = dstate;
+ gpu_power_modes.gpu_slowdown_temp = current_gpu_slowdown_temp;
+
+
+ ret = hp_wmi_perform_query(HPWMI_SET_GPU_THERMAL_MODES_QUERY, HPWMI_GM,
+ &gpu_power_modes, sizeof(gpu_power_modes), 0);
+
+ return ret;
+}
+
+/* Note: HP_POWER_LIMIT_DEFAULT can be used to restore default PL1 and PL2 */
+static int victus_s_set_cpu_pl1_pl2(u8 pl1, u8 pl2)
+{
+ struct victus_power_limits power_limits;
+ int ret;
+
+ /* We need to know both PL1 and PL2 values in order to check them */
+ if (pl1 == HP_POWER_LIMIT_NO_CHANGE || pl2 == HP_POWER_LIMIT_NO_CHANGE)
+ return -EINVAL;
+
+ /* PL2 is not supposed to be lower than PL1 */
+ if (pl2 < pl1)
+ return -EINVAL;
+
+ power_limits.pl1 = pl1;
+ power_limits.pl2 = pl2;
+ power_limits.pl4 = HP_POWER_LIMIT_NO_CHANGE;
+ power_limits.cpu_gpu_concurrent_limit = HP_POWER_LIMIT_NO_CHANGE;
+
+ ret = hp_wmi_perform_query(HPWMI_SET_POWER_LIMITS_QUERY, HPWMI_GM,
+ &power_limits, sizeof(power_limits), 0);
+
+ return ret;
+}
+
+static int platform_profile_victus_s_set_ec(enum platform_profile_option profile)
+{
+ bool gpu_ctgp_enable, gpu_ppab_enable;
+ u8 gpu_dstate; /* Test shows 1 = 100%, 2 = 50%, 3 = 25%, 4 = 12.5% */
+ int err, tp;
+
+ switch (profile) {
+ case PLATFORM_PROFILE_PERFORMANCE:
+ tp = HP_VICTUS_S_THERMAL_PROFILE_PERFORMANCE;
+ gpu_ctgp_enable = true;
+ gpu_ppab_enable = true;
+ gpu_dstate = 1;
+ break;
+ case PLATFORM_PROFILE_BALANCED:
+ tp = HP_VICTUS_S_THERMAL_PROFILE_DEFAULT;
+ gpu_ctgp_enable = false;
+ gpu_ppab_enable = true;
+ gpu_dstate = 1;
+ break;
+ case PLATFORM_PROFILE_LOW_POWER:
+ tp = HP_VICTUS_S_THERMAL_PROFILE_DEFAULT;
+ gpu_ctgp_enable = false;
+ gpu_ppab_enable = false;
+ gpu_dstate = 1;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ hp_wmi_get_fan_count_userdefine_trigger();
+
+ err = omen_thermal_profile_set(tp);
+ if (err < 0) {
+ pr_err("Failed to set platform profile %d: %d\n", profile, err);
+ return err;
+ }
+
+ err = victus_s_gpu_thermal_profile_set(gpu_ctgp_enable,
+ gpu_ppab_enable,
+ gpu_dstate);
+ if (err < 0) {
+ pr_err("Failed to set GPU profile %d: %d\n", profile, err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int platform_profile_victus_s_set(struct device *dev,
+ enum platform_profile_option profile)
+{
+ int err;
+
+ guard(mutex)(&active_platform_profile_lock);
+
+ err = platform_profile_victus_s_set_ec(profile);
+ if (err < 0)
+ return err;
+
+ active_platform_profile = profile;
+
+ return 0;
+}
+
static int platform_profile_victus_set(struct device *dev,
enum platform_profile_option profile)
{
@@ -1494,6 +1744,9 @@ static int hp_wmi_platform_profile_probe(void *drvdata, unsigned long *choices)
set_bit(PLATFORM_PROFILE_COOL, choices);
} else if (is_victus_thermal_profile()) {
set_bit(PLATFORM_PROFILE_QUIET, choices);
+ } else if (is_victus_s_thermal_profile()) {
+ /* Adding an equivalent to HP Omen software ECO mode: */
+ set_bit(PLATFORM_PROFILE_LOW_POWER, choices);
} else {
set_bit(PLATFORM_PROFILE_QUIET, choices);
set_bit(PLATFORM_PROFILE_COOL, choices);
@@ -1562,6 +1815,39 @@ static int omen_powersource_event(struct notifier_block *nb,
return NOTIFY_OK;
}
+static int victus_s_powersource_event(struct notifier_block *nb,
+ unsigned long value,
+ void *data)
+{
+ struct acpi_bus_event *event_entry = data;
+ int err;
+
+ if (strcmp(event_entry->device_class, ACPI_AC_CLASS) != 0)
+ return NOTIFY_DONE;
+
+ pr_debug("Received power source device event\n");
+
+ /*
+ * Switching to battery power source while Performance mode is active
+ * needs manual triggering of CPU power limits. Same goes when switching
+ * to AC power source while Performance mode is active. Other modes
+ * however are automatically behaving without any manual action.
+ * Seen on HP 16-s1034nf (board 8C9C) with F.11 and F.13 BIOS versions.
+ */
+
+ if (active_platform_profile == PLATFORM_PROFILE_PERFORMANCE) {
+ pr_debug("Triggering CPU PL1/PL2 actualization\n");
+ err = victus_s_set_cpu_pl1_pl2(HP_POWER_LIMIT_DEFAULT,
+ HP_POWER_LIMIT_DEFAULT);
+ if (err)
+ pr_warn("Failed to actualize power limits: %d\n", err);
+
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_OK;
+}
+
static int omen_register_powersource_event_handler(void)
{
int err;
@@ -1577,11 +1863,30 @@ static int omen_register_powersource_event_handler(void)
return 0;
}
+static int victus_s_register_powersource_event_handler(void)
+{
+ int err;
+
+ platform_power_source_nb.notifier_call = victus_s_powersource_event;
+ err = register_acpi_notifier(&platform_power_source_nb);
+ if (err < 0) {
+ pr_warn("Failed to install ACPI power source notify handler\n");
+ return err;
+ }
+
+ return 0;
+}
+
static inline void omen_unregister_powersource_event_handler(void)
{
unregister_acpi_notifier(&platform_power_source_nb);
}
+static inline void victus_s_unregister_powersource_event_handler(void)
+{
+ unregister_acpi_notifier(&platform_power_source_nb);
+}
+
static const struct platform_profile_ops platform_profile_omen_ops = {
.probe = hp_wmi_platform_profile_probe,
.profile_get = platform_profile_omen_get,
@@ -1594,6 +1899,12 @@ static const struct platform_profile_ops platform_profile_victus_ops = {
.profile_set = platform_profile_victus_set,
};
+static const struct platform_profile_ops platform_profile_victus_s_ops = {
+ .probe = hp_wmi_platform_profile_probe,
+ .profile_get = platform_profile_omen_get,
+ .profile_set = platform_profile_victus_s_set,
+};
+
static const struct platform_profile_ops hp_wmi_platform_profile_ops = {
.probe = hp_wmi_platform_profile_probe,
.profile_get = hp_wmi_platform_profile_get,
@@ -1633,6 +1944,18 @@ static int thermal_profile_setup(struct platform_device *device)
return err;
ops = &platform_profile_victus_ops;
+ } else if (is_victus_s_thermal_profile()) {
+ /*
+ * Being unable to retrieve laptop's current thermal profile,
+ * during this setup, we set it to Balanced by default.
+ */
+ active_platform_profile = PLATFORM_PROFILE_BALANCED;
+
+ err = platform_profile_victus_s_set_ec(active_platform_profile);
+ if (err < 0)
+ return err;
+
+ ops = &platform_profile_victus_s_ops;
} else {
tp = thermal_profile_get();
@@ -1655,6 +1978,7 @@ static int thermal_profile_setup(struct platform_device *device)
if (IS_ERR(platform_profile_device))
return PTR_ERR(platform_profile_device);
+ pr_info("Registered as platform profile handler\n");
platform_profile_support = true;
return 0;
@@ -1780,8 +2104,13 @@ static umode_t hp_wmi_hwmon_is_visible(const void *data,
case hwmon_pwm:
return 0644;
case hwmon_fan:
- if (hp_wmi_get_fan_speed(channel) >= 0)
- return 0444;
+ if (is_victus_s_thermal_profile()) {
+ if (hp_wmi_get_fan_speed_victus_s(channel) >= 0)
+ return 0444;
+ } else {
+ if (hp_wmi_get_fan_speed(channel) >= 0)
+ return 0444;
+ }
break;
default:
return 0;
@@ -1797,8 +2126,10 @@ static int hp_wmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
switch (type) {
case hwmon_fan:
- ret = hp_wmi_get_fan_speed(channel);
-
+ if (is_victus_s_thermal_profile())
+ ret = hp_wmi_get_fan_speed_victus_s(channel);
+ else
+ ret = hp_wmi_get_fan_speed(channel);
if (ret < 0)
return ret;
*val = ret;
@@ -1831,11 +2162,17 @@ static int hp_wmi_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
case hwmon_pwm:
switch (val) {
case 0:
+ if (is_victus_s_thermal_profile())
+ hp_wmi_get_fan_count_userdefine_trigger();
/* 0 is no fan speed control (max), which is 1 for us */
return hp_wmi_fan_speed_max_set(1);
case 2:
/* 2 is automatic speed control, which is 0 for us */
- return hp_wmi_fan_speed_max_set(0);
+ if (is_victus_s_thermal_profile()) {
+ hp_wmi_get_fan_count_userdefine_trigger();
+ return hp_wmi_fan_speed_max_reset();
+ } else
+ return hp_wmi_fan_speed_max_set(0);
default:
/* we don't support manual fan speed control */
return -EINVAL;
@@ -1914,6 +2251,10 @@ static int __init hp_wmi_init(void)
err = omen_register_powersource_event_handler();
if (err)
goto err_unregister_device;
+ } else if (is_victus_s_thermal_profile()) {
+ err = victus_s_register_powersource_event_handler();
+ if (err)
+ goto err_unregister_device;
}
return 0;
@@ -1933,6 +2274,9 @@ static void __exit hp_wmi_exit(void)
if (is_omen_thermal_profile() || is_victus_thermal_profile())
omen_unregister_powersource_event_handler();
+ if (is_victus_s_thermal_profile())
+ victus_s_unregister_powersource_event_handler();
+
if (wmi_has_guid(HPWMI_EVENT_GUID))
hp_wmi_input_destroy();
The following patch adds support for HP Victus 16-s1000 laptop series, by adding and fixing the following functionalities, which can be accessed through hwmon and platform_profile sysfs: - Functional measured fan speed reading - Ability to enable and disable maximum fan speed - Platform profiles full setting ability for CPU and GPU It sets appropriates CPU and GPU power settings both on AC and battery power sources, for low-power, balanced and performance modes. It has been thoroughly tested on a 16-s1034nf laptop based on a 8C9C DMI board name, and behavior of the driver on previous boards is left untouched thanks to the separated lists of DMI board names. Signed-off-by: Julien ROBIN <julien.robin28@free.fr> --- Changes since v4: - Re-based on review-ilpo-next branch, as of 2025-01-16 21:00 UTC - Moved some more parameters check sooner into their function - Re-ordered some function local variables declarations, based on their length Changes since v3: - Reduced the scope of coding style fixups - Updated a comment - Moved a parameter check at the beginning of its function Changes since v2: - Added 3 clearly named literal definitions, using them to avoid comments need - Changed zero filled array initialization syntax from { 0 } to {} - Removed blank lines between function calls and their associated error handling - Separated variable declarations and their assignment to function calls return Changes since v1: - More clear description of 0xFF special effect when setting power limits - Added structs for clearer naming of power limits and GPU power modes settings - Retrieve and keep current GPU slowdown temp threshold (instead of hard coded) - Removed platform_profile_victus_s_get(), re-using platform_profile_omen_get() - Changed char variable types to u8 where it was more relevant - Moved some comments - Minor typo / alignment corrections --- drivers/platform/x86/hp/hp-wmi.c | 366 ++++++++++++++++++++++++++++++- 1 file changed, 355 insertions(+), 11 deletions(-)