@@ -46,12 +46,6 @@ remove_chip() {
rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip"
}
-configfs_cleanup() {
- for CHIP in `ls $CONFIGFS_DIR/`; do
- remove_chip $CHIP
- done
-}
-
create_chip() {
local CHIP=$1
@@ -105,6 +99,13 @@ disable_chip() {
echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip"
}
+configfs_cleanup() {
+ for CHIP in `ls $CONFIGFS_DIR/`; do
+ disable_chip $CHIP
+ remove_chip $CHIP
+ done
+}
+
configfs_chip_name() {
local CHIP=$1
local BANK=$2
@@ -181,6 +182,7 @@ create_chip chip
create_bank chip bank
enable_chip chip
test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work"
+disable_chip chip
remove_chip chip
echo "1.2. chip_name returns 'none' if the chip is still pending"
@@ -195,6 +197,7 @@ create_chip chip
create_bank chip bank
enable_chip chip
test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work"
+disable_chip chip
remove_chip chip
echo "2. Creating and configuring simulated chips"
@@ -204,6 +207,7 @@ create_chip chip
create_bank chip bank
enable_chip chip
test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1"
+disable_chip chip
remove_chip chip
echo "2.2. Number of lines can be specified"
@@ -212,6 +216,7 @@ create_bank chip bank
set_num_lines chip bank 16
enable_chip chip
test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16"
+disable_chip chip
remove_chip chip
echo "2.3. Label can be set"
@@ -220,6 +225,7 @@ create_bank chip bank
set_label chip bank foobar
enable_chip chip
test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect"
+disable_chip chip
remove_chip chip
echo "2.4. Label can be left empty"
@@ -227,6 +233,7 @@ create_chip chip
create_bank chip bank
enable_chip chip
test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty"
+disable_chip chip
remove_chip chip
echo "2.5. Line names can be configured"
@@ -238,6 +245,7 @@ set_line_name chip bank 2 bar
enable_chip chip
test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect"
test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect"
+disable_chip chip
remove_chip chip
echo "2.6. Line config can remain unused if offset is greater than number of lines"
@@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar
enable_chip chip
test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect"
test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect"
+disable_chip chip
remove_chip chip
echo "2.7. Line configfs directory names are sanitized"
@@ -267,6 +276,7 @@ for CHIP in $CHIPS; do
enable_chip $CHIP
done
for CHIP in $CHIPS; do
+ disable_chip $CHIP
remove_chip $CHIP
done
@@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \
fail "Setting label of a live chip should fail"
echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \
fail "Setting number of lines of a live chip should fail"
+disable_chip chip
remove_chip chip
echo "2.10. Can't create line items when chip is live"
@@ -285,6 +296,7 @@ create_chip chip
create_bank chip bank
enable_chip chip
mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail"
+disable_chip chip
remove_chip chip
echo "2.11. Probe errors are propagated to user-space"
@@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog
enable_chip chip
$BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \
fail "Setting the value of a hogged line shouldn't succeed"
+disable_chip chip
remove_chip chip
echo "3. Controlling simulated chips"
@@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly"
sysfs_set_pull chip bank 0 pull-down
$BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1
test "$?" = "0" || fail "pull set incorrectly"
+disable_chip chip
remove_chip chip
echo "3.2. Pull can be read from sysfs"
@@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull
test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed"
sysfs_set_pull chip bank 0 pull-up
test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed"
+disable_chip chip
remove_chip chip
echo "3.3. Incorrect input in sysfs is rejected"
@@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip`
CHIPNAME=`configfs_chip_name chip bank`
SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull"
echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected"
+disable_chip chip
remove_chip chip
echo "3.4. Can't write to value"
@@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip`
CHIPNAME=`configfs_chip_name chip bank`
SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value"
echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly"
+disable_chip chip
remove_chip chip
echo "4. Simulated GPIO chips are functional"
@@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 &
sleep 0.1 # FIXME Any better way?
test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs"
kill $!
+disable_chip chip
remove_chip chip
echo "4.2. Bias settings work correctly"
@@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank`
SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value"
$BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0
test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work"
+disable_chip chip
remove_chip chip
echo "GPIO $MODULE test PASS"
Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den@canonical.com> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-)