@@ -16,6 +16,8 @@
#include "ppe_config.h"
#include "ppe_regs.h"
+#define PPE_QUEUE_SCH_PRI_NUM 8
+
/**
* struct ppe_bm_port_config - PPE BM port configuration.
* @port_id_start: The fist BM port ID to configure.
@@ -66,6 +68,66 @@ struct ppe_qm_queue_config {
bool dynamic;
};
+/**
+ * struct ppe_scheduler_bm_config - PPE arbitration for buffer config.
+ * @valid: Arbitration entry valid or not.
+ * @is_egress: Arbitration entry for egress or not.
+ * @port: Port ID to use arbitration entry.
+ * @second_valid: Second port valid or not.
+ * @second_port: Second port to use.
+ *
+ * Configure the scheduler settings for accessing and releasing the PPE buffers.
+ */
+struct ppe_scheduler_bm_config {
+ bool valid;
+ bool is_egress;
+ unsigned int port;
+ bool second_valid;
+ unsigned int second_port;
+};
+
+/**
+ * struct ppe_scheduler_qm_config - PPE arbitration for scheduler config.
+ * @ensch_port_bmp: Port bit map for enqueue scheduler.
+ * @ensch_port: Port ID to enqueue scheduler.
+ * @desch_port: Port ID to dequeue scheduler.
+ * @desch_second_valid: Dequeue for the second port valid or not.
+ * @desch_second_port: Second port ID to dequeue scheduler.
+ *
+ * Configure the scheduler settings for enqueuing and dequeuing packets on
+ * the PPE port.
+ */
+struct ppe_scheduler_qm_config {
+ unsigned int ensch_port_bmp;
+ unsigned int ensch_port;
+ unsigned int desch_port;
+ bool desch_second_valid;
+ unsigned int desch_second_port;
+};
+
+/**
+ * struct ppe_scheduler_port_config - PPE port scheduler config.
+ * @port: Port ID to be scheduled.
+ * @flow_level: Scheduler flow level or not.
+ * @node_id: Node ID, for level 0, queue ID is used.
+ * @loop_num: Loop number of scheduler config.
+ * @pri_max: Max priority configured.
+ * @flow_id: Strict priority ID.
+ * @drr_node_id: Node ID for scheduler.
+ *
+ * PPE port scheduler configuration which decides the priority in the
+ * packet scheduler for the egress port.
+ */
+struct ppe_scheduler_port_config {
+ unsigned int port;
+ bool flow_level;
+ unsigned int node_id;
+ unsigned int loop_num;
+ unsigned int pri_max;
+ unsigned int flow_id;
+ unsigned int drr_node_id;
+};
+
/* Assign the share buffer number 1550 to group 0 by default. */
static const int ipq9574_ppe_bm_group_config = 1550;
@@ -152,6 +214,599 @@ static const struct ppe_qm_queue_config ipq9574_ppe_qm_queue_config[] = {
},
};
+/* Scheduler configuration for the assigning and releasing buffers for the
+ * packet passing through PPE, which is different per SoC.
+ */
+static const struct ppe_scheduler_bm_config ipq9574_ppe_sch_bm_config[] = {
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 1, 0, 0},
+ {1, 1, 1, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 7, 0, 0},
+ {1, 1, 7, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 1, 0, 0},
+ {1, 1, 1, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 2, 0, 0},
+ {1, 1, 2, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 1, 0, 0},
+ {1, 1, 1, 0, 0},
+ {1, 0, 3, 0, 0},
+ {1, 1, 3, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 7, 0, 0},
+ {1, 1, 7, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 1, 0, 0},
+ {1, 1, 1, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 4, 0, 0},
+ {1, 1, 4, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 1, 0, 0},
+ {1, 1, 1, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 2, 0, 0},
+ {1, 1, 2, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 7, 0, 0},
+ {1, 1, 7, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 1, 0, 0},
+ {1, 1, 1, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 3, 0, 0},
+ {1, 1, 3, 0, 0},
+ {1, 0, 1, 0, 0},
+ {1, 1, 1, 0, 0},
+ {1, 0, 0, 0, 0},
+ {1, 1, 0, 0, 0},
+ {1, 0, 5, 0, 0},
+ {1, 1, 5, 0, 0},
+ {1, 0, 6, 0, 0},
+ {1, 1, 6, 0, 0},
+ {1, 0, 4, 0, 0},
+ {1, 1, 4, 0, 0},
+ {1, 0, 7, 0, 0},
+ {1, 1, 7, 0, 0},
+};
+
+/* Scheduler configuration for dispatching packet on PPE queues, which
+ * is different per SoC.
+ */
+static const struct ppe_scheduler_qm_config ipq9574_ppe_sch_qm_config[] = {
+ {0x98, 6, 0, 1, 1},
+ {0x94, 5, 6, 1, 3},
+ {0x86, 0, 5, 1, 4},
+ {0x8C, 1, 6, 1, 0},
+ {0x1C, 7, 5, 1, 1},
+ {0x98, 2, 6, 1, 0},
+ {0x1C, 5, 7, 1, 1},
+ {0x34, 3, 6, 1, 0},
+ {0x8C, 4, 5, 1, 1},
+ {0x98, 2, 6, 1, 0},
+ {0x8C, 5, 4, 1, 1},
+ {0xA8, 0, 6, 1, 2},
+ {0x98, 5, 1, 1, 0},
+ {0x98, 6, 5, 1, 2},
+ {0x89, 1, 6, 1, 4},
+ {0xA4, 3, 0, 1, 1},
+ {0x8C, 5, 6, 1, 4},
+ {0xA8, 0, 2, 1, 1},
+ {0x98, 6, 5, 1, 0},
+ {0xC4, 4, 3, 1, 1},
+ {0x94, 6, 5, 1, 0},
+ {0x1C, 7, 6, 1, 1},
+ {0x98, 2, 5, 1, 0},
+ {0x1C, 6, 7, 1, 1},
+ {0x1C, 5, 6, 1, 0},
+ {0x94, 3, 5, 1, 1},
+ {0x8C, 4, 6, 1, 0},
+ {0x94, 1, 5, 1, 3},
+ {0x94, 6, 1, 1, 0},
+ {0xD0, 3, 5, 1, 2},
+ {0x98, 6, 0, 1, 1},
+ {0x94, 5, 6, 1, 3},
+ {0x94, 1, 5, 1, 0},
+ {0x98, 2, 6, 1, 1},
+ {0x8C, 4, 5, 1, 0},
+ {0x1C, 7, 6, 1, 1},
+ {0x8C, 0, 5, 1, 4},
+ {0x89, 1, 6, 1, 2},
+ {0x98, 5, 0, 1, 1},
+ {0x94, 6, 5, 1, 3},
+ {0x92, 0, 6, 1, 2},
+ {0x98, 1, 5, 1, 0},
+ {0x98, 6, 2, 1, 1},
+ {0xD0, 0, 5, 1, 3},
+ {0x94, 6, 0, 1, 1},
+ {0x8C, 5, 6, 1, 4},
+ {0x8C, 1, 5, 1, 0},
+ {0x1C, 6, 7, 1, 1},
+ {0x1C, 5, 6, 1, 0},
+ {0xB0, 2, 3, 1, 1},
+ {0xC4, 4, 5, 1, 0},
+ {0x8C, 6, 4, 1, 1},
+ {0xA4, 3, 6, 1, 0},
+ {0x1C, 5, 7, 1, 1},
+ {0x4C, 0, 5, 1, 4},
+ {0x8C, 6, 0, 1, 1},
+ {0x34, 7, 6, 1, 3},
+ {0x94, 5, 0, 1, 1},
+ {0x98, 6, 5, 1, 2},
+};
+
+static const struct ppe_scheduler_port_config ppe_port_sch_config[] = {
+ {
+ .port = 0,
+ .flow_level = true,
+ .node_id = 0,
+ .loop_num = 1,
+ .pri_max = 1,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 0,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 8,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 16,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 24,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 32,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 40,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 48,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 56,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 256,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 0,
+ .flow_level = false,
+ .node_id = 264,
+ .loop_num = 8,
+ .pri_max = 8,
+ .flow_id = 0,
+ .drr_node_id = 0,
+ },
+ {
+ .port = 1,
+ .flow_level = true,
+ .node_id = 36,
+ .loop_num = 2,
+ .pri_max = 0,
+ .flow_id = 1,
+ .drr_node_id = 8,
+ },
+ {
+ .port = 1,
+ .flow_level = false,
+ .node_id = 144,
+ .loop_num = 16,
+ .pri_max = 8,
+ .flow_id = 36,
+ .drr_node_id = 48,
+ },
+ {
+ .port = 1,
+ .flow_level = false,
+ .node_id = 272,
+ .loop_num = 4,
+ .pri_max = 4,
+ .flow_id = 36,
+ .drr_node_id = 48,
+ },
+ {
+ .port = 2,
+ .flow_level = true,
+ .node_id = 40,
+ .loop_num = 2,
+ .pri_max = 0,
+ .flow_id = 2,
+ .drr_node_id = 12,
+ },
+ {
+ .port = 2,
+ .flow_level = false,
+ .node_id = 160,
+ .loop_num = 16,
+ .pri_max = 8,
+ .flow_id = 40,
+ .drr_node_id = 64,
+ },
+ {
+ .port = 2,
+ .flow_level = false,
+ .node_id = 276,
+ .loop_num = 4,
+ .pri_max = 4,
+ .flow_id = 40,
+ .drr_node_id = 64,
+ },
+ {
+ .port = 3,
+ .flow_level = true,
+ .node_id = 44,
+ .loop_num = 2,
+ .pri_max = 0,
+ .flow_id = 3,
+ .drr_node_id = 16,
+ },
+ {
+ .port = 3,
+ .flow_level = false,
+ .node_id = 176,
+ .loop_num = 16,
+ .pri_max = 8,
+ .flow_id = 44,
+ .drr_node_id = 80,
+ },
+ {
+ .port = 3,
+ .flow_level = false,
+ .node_id = 280,
+ .loop_num = 4,
+ .pri_max = 4,
+ .flow_id = 44,
+ .drr_node_id = 80,
+ },
+ {
+ .port = 4,
+ .flow_level = true,
+ .node_id = 48,
+ .loop_num = 2,
+ .pri_max = 0,
+ .flow_id = 4,
+ .drr_node_id = 20,
+ },
+ {
+ .port = 4,
+ .flow_level = false,
+ .node_id = 192,
+ .loop_num = 16,
+ .pri_max = 8,
+ .flow_id = 48,
+ .drr_node_id = 96,
+ },
+ {
+ .port = 4,
+ .flow_level = false,
+ .node_id = 284,
+ .loop_num = 4,
+ .pri_max = 4,
+ .flow_id = 48,
+ .drr_node_id = 96,
+ },
+ {
+ .port = 5,
+ .flow_level = true,
+ .node_id = 52,
+ .loop_num = 2,
+ .pri_max = 0,
+ .flow_id = 5,
+ .drr_node_id = 24,
+ },
+ {
+ .port = 5,
+ .flow_level = false,
+ .node_id = 208,
+ .loop_num = 16,
+ .pri_max = 8,
+ .flow_id = 52,
+ .drr_node_id = 112,
+ },
+ {
+ .port = 5,
+ .flow_level = false,
+ .node_id = 288,
+ .loop_num = 4,
+ .pri_max = 4,
+ .flow_id = 52,
+ .drr_node_id = 112,
+ },
+ {
+ .port = 6,
+ .flow_level = true,
+ .node_id = 56,
+ .loop_num = 2,
+ .pri_max = 0,
+ .flow_id = 6,
+ .drr_node_id = 28,
+ },
+ {
+ .port = 6,
+ .flow_level = false,
+ .node_id = 224,
+ .loop_num = 16,
+ .pri_max = 8,
+ .flow_id = 56,
+ .drr_node_id = 128,
+ },
+ {
+ .port = 6,
+ .flow_level = false,
+ .node_id = 292,
+ .loop_num = 4,
+ .pri_max = 4,
+ .flow_id = 56,
+ .drr_node_id = 128,
+ },
+ {
+ .port = 7,
+ .flow_level = true,
+ .node_id = 60,
+ .loop_num = 2,
+ .pri_max = 0,
+ .flow_id = 7,
+ .drr_node_id = 32,
+ },
+ {
+ .port = 7,
+ .flow_level = false,
+ .node_id = 240,
+ .loop_num = 16,
+ .pri_max = 8,
+ .flow_id = 60,
+ .drr_node_id = 144,
+ },
+ {
+ .port = 7,
+ .flow_level = false,
+ .node_id = 296,
+ .loop_num = 4,
+ .pri_max = 4,
+ .flow_id = 60,
+ .drr_node_id = 144,
+ },
+};
+
+/* Set the PPE queue level scheduler configuration. */
+static int ppe_scheduler_l0_queue_map_set(struct ppe_device *ppe_dev,
+ int node_id, int port,
+ struct ppe_scheduler_cfg scheduler_cfg)
+{
+ u32 val, reg;
+ int ret;
+
+ reg = PPE_L0_FLOW_MAP_TBL_ADDR + node_id * PPE_L0_FLOW_MAP_TBL_INC;
+ val = FIELD_PREP(PPE_L0_FLOW_MAP_TBL_FLOW_ID, scheduler_cfg.flow_id);
+ val |= FIELD_PREP(PPE_L0_FLOW_MAP_TBL_C_PRI, scheduler_cfg.pri);
+ val |= FIELD_PREP(PPE_L0_FLOW_MAP_TBL_E_PRI, scheduler_cfg.pri);
+ val |= FIELD_PREP(PPE_L0_FLOW_MAP_TBL_C_NODE_WT, scheduler_cfg.drr_node_wt);
+ val |= FIELD_PREP(PPE_L0_FLOW_MAP_TBL_E_NODE_WT, scheduler_cfg.drr_node_wt);
+
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ reg = PPE_L0_C_FLOW_CFG_TBL_ADDR +
+ (scheduler_cfg.flow_id * PPE_QUEUE_SCH_PRI_NUM + scheduler_cfg.pri) *
+ PPE_L0_C_FLOW_CFG_TBL_INC;
+ val = FIELD_PREP(PPE_L0_C_FLOW_CFG_TBL_NODE_ID, scheduler_cfg.drr_node_id);
+ val |= FIELD_PREP(PPE_L0_C_FLOW_CFG_TBL_NODE_CREDIT_UNIT, scheduler_cfg.unit_is_packet);
+
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ reg = PPE_L0_E_FLOW_CFG_TBL_ADDR +
+ (scheduler_cfg.flow_id * PPE_QUEUE_SCH_PRI_NUM + scheduler_cfg.pri) *
+ PPE_L0_E_FLOW_CFG_TBL_INC;
+ val = FIELD_PREP(PPE_L0_E_FLOW_CFG_TBL_NODE_ID, scheduler_cfg.drr_node_id);
+ val |= FIELD_PREP(PPE_L0_E_FLOW_CFG_TBL_NODE_CREDIT_UNIT, scheduler_cfg.unit_is_packet);
+
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ reg = PPE_L0_FLOW_PORT_MAP_TBL_ADDR + node_id * PPE_L0_FLOW_PORT_MAP_TBL_INC;
+ val = FIELD_PREP(PPE_L0_FLOW_PORT_MAP_TBL_PORT_NUM, port);
+
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ reg = PPE_L0_COMP_CFG_TBL_ADDR + node_id * PPE_L0_COMP_CFG_TBL_INC;
+ val = FIELD_PREP(PPE_L0_COMP_CFG_TBL_NODE_METER_LEN, scheduler_cfg.frame_mode);
+
+ return regmap_update_bits(ppe_dev->regmap, reg,
+ PPE_L0_COMP_CFG_TBL_NODE_METER_LEN,
+ val);
+}
+
+/* Set the PPE flow level scheduler configuration. */
+static int ppe_scheduler_l1_queue_map_set(struct ppe_device *ppe_dev,
+ int node_id, int port,
+ struct ppe_scheduler_cfg scheduler_cfg)
+{
+ u32 val, reg;
+ int ret;
+
+ val = FIELD_PREP(PPE_L1_FLOW_MAP_TBL_FLOW_ID, scheduler_cfg.flow_id);
+ val |= FIELD_PREP(PPE_L1_FLOW_MAP_TBL_C_PRI, scheduler_cfg.pri);
+ val |= FIELD_PREP(PPE_L1_FLOW_MAP_TBL_E_PRI, scheduler_cfg.pri);
+ val |= FIELD_PREP(PPE_L1_FLOW_MAP_TBL_C_NODE_WT, scheduler_cfg.drr_node_wt);
+ val |= FIELD_PREP(PPE_L1_FLOW_MAP_TBL_E_NODE_WT, scheduler_cfg.drr_node_wt);
+ reg = PPE_L1_FLOW_MAP_TBL_ADDR + node_id * PPE_L1_FLOW_MAP_TBL_INC;
+
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ val = FIELD_PREP(PPE_L1_C_FLOW_CFG_TBL_NODE_ID, scheduler_cfg.drr_node_id);
+ val |= FIELD_PREP(PPE_L1_C_FLOW_CFG_TBL_NODE_CREDIT_UNIT, scheduler_cfg.unit_is_packet);
+ reg = PPE_L1_C_FLOW_CFG_TBL_ADDR +
+ (scheduler_cfg.flow_id * PPE_QUEUE_SCH_PRI_NUM + scheduler_cfg.pri) *
+ PPE_L1_C_FLOW_CFG_TBL_INC;
+
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ val = FIELD_PREP(PPE_L1_E_FLOW_CFG_TBL_NODE_ID, scheduler_cfg.drr_node_id);
+ val |= FIELD_PREP(PPE_L1_E_FLOW_CFG_TBL_NODE_CREDIT_UNIT, scheduler_cfg.unit_is_packet);
+ reg = PPE_L1_E_FLOW_CFG_TBL_ADDR +
+ (scheduler_cfg.flow_id * PPE_QUEUE_SCH_PRI_NUM + scheduler_cfg.pri) *
+ PPE_L1_E_FLOW_CFG_TBL_INC;
+
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ val = FIELD_PREP(PPE_L1_FLOW_PORT_MAP_TBL_PORT_NUM, port);
+ reg = PPE_L1_FLOW_PORT_MAP_TBL_ADDR + node_id * PPE_L1_FLOW_PORT_MAP_TBL_INC;
+
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ reg = PPE_L1_COMP_CFG_TBL_ADDR + node_id * PPE_L1_COMP_CFG_TBL_INC;
+ val = FIELD_PREP(PPE_L1_COMP_CFG_TBL_NODE_METER_LEN, scheduler_cfg.frame_mode);
+
+ return regmap_update_bits(ppe_dev->regmap, reg, PPE_L1_COMP_CFG_TBL_NODE_METER_LEN, val);
+}
+
+/**
+ * ppe_queue_scheduler_set - Configure scheduler for PPE hardware queue
+ * @ppe_dev: PPE device
+ * @node_id: PPE queue ID or flow ID
+ * @flow_level: Flow level scheduler or queue level scheduler
+ * @port: PPE port ID set scheduler configuration
+ * @scheduler_cfg: PPE scheduler configuration
+ *
+ * PPE scheduler configuration supports queue level and flow level on
+ * the PPE egress port.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int ppe_queue_scheduler_set(struct ppe_device *ppe_dev,
+ int node_id, bool flow_level, int port,
+ struct ppe_scheduler_cfg scheduler_cfg)
+{
+ if (flow_level)
+ return ppe_scheduler_l1_queue_map_set(ppe_dev, node_id,
+ port, scheduler_cfg);
+
+ return ppe_scheduler_l0_queue_map_set(ppe_dev, node_id,
+ port, scheduler_cfg);
+}
+
static int ppe_config_bm_threshold(struct ppe_device *ppe_dev, int bm_port_id,
const struct ppe_bm_port_config port_cfg)
{
@@ -358,6 +1013,133 @@ static int ppe_config_qm(struct ppe_device *ppe_dev)
return ret;
}
+static int ppe_node_scheduler_config(struct ppe_device *ppe_dev,
+ const struct ppe_scheduler_port_config config)
+{
+ struct ppe_scheduler_cfg sch_cfg;
+ int ret, i;
+
+ for (i = 0; i < config.loop_num; i++) {
+ if (!config.pri_max) {
+ /* Round robin scheduler without priority. */
+ sch_cfg.flow_id = config.flow_id;
+ sch_cfg.pri = 0;
+ sch_cfg.drr_node_id = config.drr_node_id;
+ } else {
+ sch_cfg.flow_id = config.flow_id + (i / config.pri_max);
+ sch_cfg.pri = i % config.pri_max;
+ sch_cfg.drr_node_id = config.drr_node_id + i;
+ }
+
+ /* Scheduler weight, must be more than 0. */
+ sch_cfg.drr_node_wt = 1;
+ /* Byte based to be scheduled. */
+ sch_cfg.unit_is_packet = false;
+ /* Frame + CRC calculated. */
+ sch_cfg.frame_mode = PPE_SCH_WITH_FRAME_CRC;
+
+ ret = ppe_queue_scheduler_set(ppe_dev, config.node_id + i,
+ config.flow_level,
+ config.port,
+ sch_cfg);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* Initialize scheduler settings for PPE buffer utilization and dispatching
+ * packet on PPE queue.
+ */
+static int ppe_config_scheduler(struct ppe_device *ppe_dev)
+{
+ const struct ppe_scheduler_port_config *port_cfg;
+ const struct ppe_scheduler_qm_config *qm_cfg;
+ const struct ppe_scheduler_bm_config *bm_cfg;
+ int ret, i, count;
+ u32 val, reg;
+
+ count = ARRAY_SIZE(ipq9574_ppe_sch_bm_config);
+ bm_cfg = ipq9574_ppe_sch_bm_config;
+
+ /* Configure the depth of BM scheduler entries. */
+ val = FIELD_PREP(PPE_BM_SCH_CTRL_SCH_DEPTH, count);
+ val |= FIELD_PREP(PPE_BM_SCH_CTRL_SCH_OFFSET, 0);
+ val |= FIELD_PREP(PPE_BM_SCH_CTRL_SCH_EN, 1);
+
+ ret = regmap_write(ppe_dev->regmap, PPE_BM_SCH_CTRL_ADDR, val);
+ if (ret)
+ goto sch_config_fail;
+
+ /* Configure each BM scheduler entry with the valid ingress port and
+ * egress port, the second port takes effect when the specified port
+ * is in the inactive state.
+ */
+ for (i = 0; i < count; i++) {
+ val = FIELD_PREP(PPE_BM_SCH_CFG_TBL_VALID, bm_cfg[i].valid);
+ val |= FIELD_PREP(PPE_BM_SCH_CFG_TBL_DIR, bm_cfg[i].is_egress);
+ val |= FIELD_PREP(PPE_BM_SCH_CFG_TBL_PORT_NUM, bm_cfg[i].port);
+ val |= FIELD_PREP(PPE_BM_SCH_CFG_TBL_SECOND_PORT_VALID, bm_cfg[i].second_valid);
+ val |= FIELD_PREP(PPE_BM_SCH_CFG_TBL_SECOND_PORT, bm_cfg[i].second_port);
+
+ reg = PPE_BM_SCH_CFG_TBL_ADDR + i * PPE_BM_SCH_CFG_TBL_INC;
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ goto sch_config_fail;
+ }
+
+ count = ARRAY_SIZE(ipq9574_ppe_sch_qm_config);
+ qm_cfg = ipq9574_ppe_sch_qm_config;
+
+ /* Configure the depth of QM scheduler entries. */
+ val = FIELD_PREP(PPE_PSCH_SCH_DEPTH_CFG_SCH_DEPTH, count);
+ ret = regmap_write(ppe_dev->regmap, PPE_PSCH_SCH_DEPTH_CFG_ADDR, val);
+ if (ret)
+ goto sch_config_fail;
+
+ /* Configure each QM scheduler entry with enqueue port and dequeue
+ * port, the second port takes effect when the specified dequeue
+ * port is in the inactive port.
+ */
+ for (i = 0; i < count; i++) {
+ val = FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_ENS_PORT_BITMAP,
+ qm_cfg[i].ensch_port_bmp);
+ val |= FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_ENS_PORT,
+ qm_cfg[i].ensch_port);
+ val |= FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_DES_PORT,
+ qm_cfg[i].desch_port);
+ val |= FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_DES_SECOND_PORT_EN,
+ qm_cfg[i].desch_second_valid);
+ val |= FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_DES_SECOND_PORT,
+ qm_cfg[i].desch_second_port);
+
+ reg = PPE_PSCH_SCH_CFG_TBL_ADDR + i * PPE_PSCH_SCH_CFG_TBL_INC;
+ ret = regmap_write(ppe_dev->regmap, reg, val);
+ if (ret)
+ goto sch_config_fail;
+ }
+
+ count = ARRAY_SIZE(ppe_port_sch_config);
+ port_cfg = ppe_port_sch_config;
+
+ /* Configure scheduler per PPE queue or flow. */
+ for (i = 0; i < count; i++) {
+ if (port_cfg[i].port >= ppe_dev->num_ports)
+ break;
+
+ ret = ppe_node_scheduler_config(ppe_dev, port_cfg[i]);
+ if (ret)
+ goto sch_config_fail;
+ }
+
+ return 0;
+
+sch_config_fail:
+ dev_err(ppe_dev->dev, "PPE scheduler arbitration config error %d\n", ret);
+ return ret;
+};
+
int ppe_hw_config(struct ppe_device *ppe_dev)
{
int ret;
@@ -366,5 +1148,9 @@ int ppe_hw_config(struct ppe_device *ppe_dev)
if (ret)
return ret;
- return ppe_config_qm(ppe_dev);
+ ret = ppe_config_qm(ppe_dev);
+ if (ret)
+ return ret;
+
+ return ppe_config_scheduler(ppe_dev);
}
@@ -8,5 +8,42 @@
#include "ppe.h"
+/**
+ * enum ppe_scheduler_frame_mode - PPE scheduler frame mode.
+ * @PPE_SCH_WITH_IPG_PREAMBLE_FRAME_CRC: The scheduled frame includes IPG,
+ * preamble, Ethernet packet and CRC.
+ * @PPE_SCH_WITH_FRAME_CRC: The scheduled frame includes Ethernet frame and CRC
+ * excluding IPG and preamble.
+ * @PPE_SCH_WITH_L3_PAYLOAD: The scheduled frame includes layer 3 packet data.
+ */
+enum ppe_scheduler_frame_mode {
+ PPE_SCH_WITH_IPG_PREAMBLE_FRAME_CRC = 0,
+ PPE_SCH_WITH_FRAME_CRC = 1,
+ PPE_SCH_WITH_L3_PAYLOAD = 2,
+};
+
+/**
+ * struct ppe_scheduler_cfg - PPE scheduler configuration.
+ * @flow_id: PPE flow ID.
+ * @pri: Scheduler priority.
+ * @drr_node_id: Node ID for scheduled traffic.
+ * @drr_node_wt: Weight for scheduled traffic.
+ * @unit_is_packet: Packet based or byte based unit for scheduled traffic.
+ * @frame_mode: Packet mode to be scheduled.
+ *
+ * PPE scheduler supports commit rate and exceed rate configurations.
+ */
+struct ppe_scheduler_cfg {
+ int flow_id;
+ int pri;
+ int drr_node_id;
+ int drr_node_wt;
+ bool unit_is_packet;
+ enum ppe_scheduler_frame_mode frame_mode;
+};
+
int ppe_hw_config(struct ppe_device *ppe_dev);
+int ppe_queue_scheduler_set(struct ppe_device *ppe_dev,
+ int node_id, bool flow_level, int port,
+ struct ppe_scheduler_cfg scheduler_cfg);
#endif
@@ -9,16 +9,113 @@
#include <linux/bitfield.h>
+/* PPE scheduler configurations for buffer manager block. */
+#define PPE_BM_SCH_CTRL_ADDR 0xb000
+#define PPE_BM_SCH_CTRL_INC 4
+#define PPE_BM_SCH_CTRL_SCH_DEPTH GENMASK(7, 0)
+#define PPE_BM_SCH_CTRL_SCH_OFFSET GENMASK(14, 8)
+#define PPE_BM_SCH_CTRL_SCH_EN BIT(31)
+
+#define PPE_BM_SCH_CFG_TBL_ADDR 0xc000
+#define PPE_BM_SCH_CFG_TBL_ENTRIES 128
+#define PPE_BM_SCH_CFG_TBL_INC 0x10
+#define PPE_BM_SCH_CFG_TBL_PORT_NUM GENMASK(3, 0)
+#define PPE_BM_SCH_CFG_TBL_DIR BIT(4)
+#define PPE_BM_SCH_CFG_TBL_VALID BIT(5)
+#define PPE_BM_SCH_CFG_TBL_SECOND_PORT_VALID BIT(6)
+#define PPE_BM_SCH_CFG_TBL_SECOND_PORT GENMASK(11, 8)
+
/* PPE queue counters enable/disable control. */
#define PPE_EG_BRIDGE_CONFIG_ADDR 0x20044
#define PPE_EG_BRIDGE_CONFIG_QUEUE_CNT_EN BIT(2)
+/* Port scheduler global config. */
+#define PPE_PSCH_SCH_DEPTH_CFG_ADDR 0x400000
+#define PPE_PSCH_SCH_DEPTH_CFG_INC 4
+#define PPE_PSCH_SCH_DEPTH_CFG_SCH_DEPTH GENMASK(7, 0)
+
+/* PPE queue level scheduler configurations. */
+#define PPE_L0_FLOW_MAP_TBL_ADDR 0x402000
+#define PPE_L0_FLOW_MAP_TBL_ENTRIES 300
+#define PPE_L0_FLOW_MAP_TBL_INC 0x10
+#define PPE_L0_FLOW_MAP_TBL_FLOW_ID GENMASK(5, 0)
+#define PPE_L0_FLOW_MAP_TBL_C_PRI GENMASK(8, 6)
+#define PPE_L0_FLOW_MAP_TBL_E_PRI GENMASK(11, 9)
+#define PPE_L0_FLOW_MAP_TBL_C_NODE_WT GENMASK(21, 12)
+#define PPE_L0_FLOW_MAP_TBL_E_NODE_WT GENMASK(31, 22)
+
+#define PPE_L0_C_FLOW_CFG_TBL_ADDR 0x404000
+#define PPE_L0_C_FLOW_CFG_TBL_ENTRIES 512
+#define PPE_L0_C_FLOW_CFG_TBL_INC 0x10
+#define PPE_L0_C_FLOW_CFG_TBL_NODE_ID GENMASK(7, 0)
+#define PPE_L0_C_FLOW_CFG_TBL_NODE_CREDIT_UNIT BIT(8)
+
+#define PPE_L0_E_FLOW_CFG_TBL_ADDR 0x406000
+#define PPE_L0_E_FLOW_CFG_TBL_ENTRIES 512
+#define PPE_L0_E_FLOW_CFG_TBL_INC 0x10
+#define PPE_L0_E_FLOW_CFG_TBL_NODE_ID GENMASK(7, 0)
+#define PPE_L0_E_FLOW_CFG_TBL_NODE_CREDIT_UNIT BIT(8)
+
+#define PPE_L0_FLOW_PORT_MAP_TBL_ADDR 0x408000
+#define PPE_L0_FLOW_PORT_MAP_TBL_ENTRIES 300
+#define PPE_L0_FLOW_PORT_MAP_TBL_INC 0x10
+#define PPE_L0_FLOW_PORT_MAP_TBL_PORT_NUM GENMASK(3, 0)
+
+#define PPE_L0_COMP_CFG_TBL_ADDR 0x428000
+#define PPE_L0_COMP_CFG_TBL_ENTRIES 300
+#define PPE_L0_COMP_CFG_TBL_INC 0x10
+#define PPE_L0_COMP_CFG_TBL_SHAPER_METER_LEN GENMASK(1, 0)
+#define PPE_L0_COMP_CFG_TBL_NODE_METER_LEN GENMASK(3, 2)
+
/* Table addresses for per-queue dequeue setting. */
#define PPE_DEQ_OPR_TBL_ADDR 0x430000
#define PPE_DEQ_OPR_TBL_ENTRIES 300
#define PPE_DEQ_OPR_TBL_INC 0x10
#define PPE_DEQ_OPR_TBL_DEQ_DISABLE BIT(0)
+/* PPE flow level scheduler configurations. */
+#define PPE_L1_FLOW_MAP_TBL_ADDR 0x440000
+#define PPE_L1_FLOW_MAP_TBL_ENTRIES 64
+#define PPE_L1_FLOW_MAP_TBL_INC 0x10
+#define PPE_L1_FLOW_MAP_TBL_FLOW_ID GENMASK(3, 0)
+#define PPE_L1_FLOW_MAP_TBL_C_PRI GENMASK(6, 4)
+#define PPE_L1_FLOW_MAP_TBL_E_PRI GENMASK(9, 7)
+#define PPE_L1_FLOW_MAP_TBL_C_NODE_WT GENMASK(19, 10)
+#define PPE_L1_FLOW_MAP_TBL_E_NODE_WT GENMASK(29, 20)
+
+#define PPE_L1_C_FLOW_CFG_TBL_ADDR 0x442000
+#define PPE_L1_C_FLOW_CFG_TBL_ENTRIES 64
+#define PPE_L1_C_FLOW_CFG_TBL_INC 0x10
+#define PPE_L1_C_FLOW_CFG_TBL_NODE_ID GENMASK(5, 0)
+#define PPE_L1_C_FLOW_CFG_TBL_NODE_CREDIT_UNIT BIT(6)
+
+#define PPE_L1_E_FLOW_CFG_TBL_ADDR 0x444000
+#define PPE_L1_E_FLOW_CFG_TBL_ENTRIES 64
+#define PPE_L1_E_FLOW_CFG_TBL_INC 0x10
+#define PPE_L1_E_FLOW_CFG_TBL_NODE_ID GENMASK(5, 0)
+#define PPE_L1_E_FLOW_CFG_TBL_NODE_CREDIT_UNIT BIT(6)
+
+#define PPE_L1_FLOW_PORT_MAP_TBL_ADDR 0x446000
+#define PPE_L1_FLOW_PORT_MAP_TBL_ENTRIES 64
+#define PPE_L1_FLOW_PORT_MAP_TBL_INC 0x10
+#define PPE_L1_FLOW_PORT_MAP_TBL_PORT_NUM GENMASK(3, 0)
+
+#define PPE_L1_COMP_CFG_TBL_ADDR 0x46a000
+#define PPE_L1_COMP_CFG_TBL_ENTRIES 64
+#define PPE_L1_COMP_CFG_TBL_INC 0x10
+#define PPE_L1_COMP_CFG_TBL_SHAPER_METER_LEN GENMASK(1, 0)
+#define PPE_L1_COMP_CFG_TBL_NODE_METER_LEN GENMASK(3, 2)
+
+/* PPE port scheduler configurations for egress. */
+#define PPE_PSCH_SCH_CFG_TBL_ADDR 0x47a000
+#define PPE_PSCH_SCH_CFG_TBL_ENTRIES 128
+#define PPE_PSCH_SCH_CFG_TBL_INC 0x10
+#define PPE_PSCH_SCH_CFG_TBL_DES_PORT GENMASK(3, 0)
+#define PPE_PSCH_SCH_CFG_TBL_ENS_PORT GENMASK(7, 4)
+#define PPE_PSCH_SCH_CFG_TBL_ENS_PORT_BITMAP GENMASK(15, 8)
+#define PPE_PSCH_SCH_CFG_TBL_DES_SECOND_PORT_EN BIT(16)
+#define PPE_PSCH_SCH_CFG_TBL_DES_SECOND_PORT GENMASK(20, 17)
+
/* There are 15 BM ports and 4 BM groups supported by PPE.
* BM port (0-7) is for EDMA port 0, BM port (8-13) is for
* PPE physical port 1-6 and BM port 14 is for EIP port.
The PPE scheduler settings determine the priority of scheduling the packet across the different hardware queues per PPE port. Signed-off-by: Luo Jie <quic_luoj@quicinc.com> --- drivers/net/ethernet/qualcomm/ppe/ppe_config.c | 788 ++++++++++++++++++++++++- drivers/net/ethernet/qualcomm/ppe/ppe_config.h | 37 ++ drivers/net/ethernet/qualcomm/ppe/ppe_regs.h | 97 +++ 3 files changed, 921 insertions(+), 1 deletion(-)