| Message ID | 20250219160749.1750797-1-claudiu.beznea.uj@bp.renesas.com |
|---|---|
| Headers | show |
| Series | phy: renesas: rcar-gen3-usb2: Fixes for Renesas RZ/G3S | expand |
Adding reference to the missing series (see below). On 19.02.2025 18:07, Claudiu wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Hi, > > Series add fixes for the Renesas USB2 PHY driver identified while > working on the Renesas RZ/G3S USB support. These changes are > needed for the upcomming RZ/G3S USB support (especially for the > power management support). > > Series (with [1] on top) was tested on Renesas RZ/G3S with consecutive > unbind/bind and data transfer tests before/after the unbind/bind. > > The unbind/bind was also tested on the devices with the following > device trees but w/o checking the data transfer (as I only had > remote access w/o USB devices connected): > - r8a7742-iwg21d-q7.dts > - r8a7743-iwg20d-q7.dts > - r8a7744-iwg20d-q7.dts > - r8a7745-iwg22d-sodimm.dts > - r8a77470-iwg23s-sbc.dts > - r8a774a1-hihope-rzg2m-ex.dts > - r8a774b1-hihope-rzg2n-ex.dts > - r8a774e1-hihope-rzg2h-ex.dts > - r9a07g043u11-smarc.dts > - r9a07g044c2-smarc.dts > - r9a07g044l2-smarc.dts > - r9a07g054l2-smarc.dts > - r9a07g043f01-smarc.dts > > Please give it a try also on your devices with [1] on top as well. > > Thank you, > Claudiu Beznea [1] https://lore.kernel.org/all/20250219161239.1751756-1-claudiu.beznea.uj@bp.renesas.com > > Claudiu Beznea (5): > phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind > phy: renesas: rcar-gen3-usb2: Move IRQ request in probe > phy: renesas: rcar-gen3-usb2: Lock around hardware registers and > driver data > phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off > phy: renesas: rcar-gen3-usb2: Set timing registers only once > > drivers/phy/renesas/phy-rcar-gen3-usb2.c | 134 +++++++++++++---------- > 1 file changed, 74 insertions(+), 60 deletions(-) >
Hello Claudiu-san, > From: Claudiu, Sent: Thursday, February 20, 2025 1:08 AM > > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Hi, > > Series add fixes for the Renesas USB2 PHY driver identified while > working on the Renesas RZ/G3S USB support. These changes are > needed for the upcomming RZ/G3S USB support (especially for the > power management support). > > Series (with [1] on top) was tested on Renesas RZ/G3S with consecutive > unbind/bind and data transfer tests before/after the unbind/bind. > > The unbind/bind was also tested on the devices with the following > device trees but w/o checking the data transfer (as I only had > remote access w/o USB devices connected): > - r8a7742-iwg21d-q7.dts > - r8a7743-iwg20d-q7.dts > - r8a7744-iwg20d-q7.dts > - r8a7745-iwg22d-sodimm.dts > - r8a77470-iwg23s-sbc.dts > - r8a774a1-hihope-rzg2m-ex.dts > - r8a774b1-hihope-rzg2n-ex.dts > - r8a774e1-hihope-rzg2h-ex.dts > - r9a07g043u11-smarc.dts > - r9a07g044c2-smarc.dts > - r9a07g044l2-smarc.dts > - r9a07g054l2-smarc.dts > - r9a07g043f01-smarc.dts > > Please give it a try also on your devices with [1] on top as well. Thank you for the patches! Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> I tested on my environment (r8a77951-salvator-xs.dts) and it worked correctly. So, Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Best regards, Yoshihiro Shimoda > Thank you, > Claudiu Beznea > > Claudiu Beznea (5): > phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind > phy: renesas: rcar-gen3-usb2: Move IRQ request in probe > phy: renesas: rcar-gen3-usb2: Lock around hardware registers and > driver data > phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off > phy: renesas: rcar-gen3-usb2: Set timing registers only once > > drivers/phy/renesas/phy-rcar-gen3-usb2.c | 134 +++++++++++++---------- > 1 file changed, 74 insertions(+), 60 deletions(-) > > -- > 2.43.0
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Hi, Series add fixes for the Renesas USB2 PHY driver identified while working on the Renesas RZ/G3S USB support. These changes are needed for the upcomming RZ/G3S USB support (especially for the power management support). Series (with [1] on top) was tested on Renesas RZ/G3S with consecutive unbind/bind and data transfer tests before/after the unbind/bind. The unbind/bind was also tested on the devices with the following device trees but w/o checking the data transfer (as I only had remote access w/o USB devices connected): - r8a7742-iwg21d-q7.dts - r8a7743-iwg20d-q7.dts - r8a7744-iwg20d-q7.dts - r8a7745-iwg22d-sodimm.dts - r8a77470-iwg23s-sbc.dts - r8a774a1-hihope-rzg2m-ex.dts - r8a774b1-hihope-rzg2n-ex.dts - r8a774e1-hihope-rzg2h-ex.dts - r9a07g043u11-smarc.dts - r9a07g044c2-smarc.dts - r9a07g044l2-smarc.dts - r9a07g054l2-smarc.dts - r9a07g043f01-smarc.dts Please give it a try also on your devices with [1] on top as well. Thank you, Claudiu Beznea Claudiu Beznea (5): phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind phy: renesas: rcar-gen3-usb2: Move IRQ request in probe phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off phy: renesas: rcar-gen3-usb2: Set timing registers only once drivers/phy/renesas/phy-rcar-gen3-usb2.c | 134 +++++++++++++---------- 1 file changed, 74 insertions(+), 60 deletions(-)