| Message ID | E1tl5y1-004UgG-8X@rmk-PC.armlinux.org.uk (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [net-next] net: stmmac: print stmmac_init_dma_engine() errors using netdev_err() | expand |
Hello: This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Thu, 20 Feb 2025 12:47:49 +0000 you wrote: > stmmac_init_dma_engine() uses dev_err() which leads to errors being > reported as e.g: > > dwc-eth-dwmac 2490000.ethernet: Failed to reset the dma > dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed > > stmmac_init_dma_engine() is only called from stmmac_hw_setup() which > itself uses netdev_err(), and we will have a net_device setup. So, > change the dev_err() to netdev_err() to give consistent error > messages. > > [...] Here is the summary with links: - [net-next] net: stmmac: print stmmac_init_dma_engine() errors using netdev_err() https://git.kernel.org/netdev/net-next/c/3e401818c81b You are awesome, thank you!
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 4d542f482ecb..218ecc945e9e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3034,7 +3034,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) int ret = 0; if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) { - dev_err(priv->device, "Invalid DMA configuration\n"); + netdev_err(priv->dev, "Invalid DMA configuration\n"); return -EINVAL; } @@ -3043,7 +3043,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) ret = stmmac_reset(priv, priv->ioaddr); if (ret) { - dev_err(priv->device, "Failed to reset the dma\n"); + netdev_err(priv->dev, "Failed to reset the dma\n"); return ret; }
stmmac_init_dma_engine() uses dev_err() which leads to errors being reported as e.g: dwc-eth-dwmac 2490000.ethernet: Failed to reset the dma dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed stmmac_init_dma_engine() is only called from stmmac_hw_setup() which itself uses netdev_err(), and we will have a net_device setup. So, change the dev_err() to netdev_err() to give consistent error messages. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)