diff mbox series

[v2,1/7] media: dt-bindings: mt9m114: Add pad-slew-rate DT-binding

Message ID 20250304103647.34235-2-mathis.foerst@mt.com (mailing list archive)
State New
Headers show
Series MT9M114 driver bugfix and improvements | expand

Commit Message

Mathis Foerst March 4, 2025, 10:36 a.m. UTC 
The MT9M114 supports the different slew rates (0 to 7) on the output pads.
At the moment, this is hardcoded to 7 (the fastest rate).
The user might want to change this values due to EMC requirements.

Add the 'pad-slew-rate' property to the MT9M114 DT-bindings for selecting
the desired slew rate.

Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
---
 .../devicetree/bindings/media/i2c/onnn,mt9m114.yaml      | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Krzysztof Kozlowski March 5, 2025, 7:21 a.m. UTC | #1 
On Tue, Mar 04, 2025 at 11:36:41AM +0100, Mathis Foerst wrote:
> The MT9M114 supports the different slew rates (0 to 7) on the output pads.
> At the moment, this is hardcoded to 7 (the fastest rate).
> The user might want to change this values due to EMC requirements.
> 
> Add the 'pad-slew-rate' property to the MT9M114 DT-bindings for selecting

Old commit msg? I see different name.

> the desired slew rate.
> 
> Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
> ---

With fixed commit msg:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
index f6b87892068a..c184bc04b743 100644
--- a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
@@ -70,6 +70,15 @@  properties:
           - bus-type
           - link-frequencies
 
+  onnn,slew-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slew rate ot the output pads DOUT[7:0], LINE_VALID, FRAME_VALID and
+      PIXCLK. Higher values imply steeper voltage-flanks on the pads.
+    minimum: 0
+    maximum: 7
+    default: 7
+
 required:
   - compatible
   - reg