| Message ID | 20250329113925.68204-1-aradhya.bhatia@linux.dev (mailing list archive) |
|---|---|
| Headers | show |
| Series | drm/bridge: cdns-dsi: Fix the color-shift issue | expand |
On Sat, 29 Mar 2025 17:09:11 +0530, Aradhya Bhatia wrote: > This series provides some crucial fixes and improvements for the Cadence's DSI > TX (cdns-dsi) controller found commonly in Texas Instruments' J7 family of SoCs, > as well as in Sitara AM62P and AM62L SoCs. > > Along with that, this series aims to fix the color-shift issue that has been > going on with the DSI controller. This controller requires to be enabled before > the previous entity enables its stream[0]. It's a strict requirement which, if > not followed, causes the colors to "shift" on the display. The fix happens in > 2 steps. > > [...] Applied to drm-misc-next, thanks! [01/14] drm/bridge: cdns-dsi: Fix connecting to next bridge commit: 688eb4d465484bc2a3471a6a6f06f833b58c7867 [02/14] drm/bridge: cdns-dsi: Fix phy de-init and flag it so commit: fd2611c13f69cbbc6b81d9fc7502abf4f7031d21 [03/14] drm/bridge: cdns-dsi: Fix the clock variable for mode_valid() commit: 132bdcec399be6ae947582249a134b38cf56731c [04/14] drm/bridge: cdns-dsi: Check return value when getting default PHY config commit: c6a7ef0d4856b9629df390e9935d7fd67fe39f81 [05/14] drm/bridge: cdns-dsi: Wait for Clk and Data Lanes to be ready commit: 47c03e6660e96cbba0239125b1d4a9db3c724b1d [06/14] drm/bridge: cdns-dsi: Move to devm_drm_of_get_bridge() commit: 7ad8b3441b8ebfc56b439a28328f78c755bbef29 [07/14] drm/mipi-dsi: Add helper to find input format commit: e83967c355d6194c906e7bb3f1c72cb002e14c9d [08/14] drm/bridge: cdns-dsi: Add input format negotiation commit: bc36ee983fb34962a407c06196cc7874bf408146 [09/14] drm/bridge: cdns-dsi: Move DSI mode check to _atomic_check() commit: a53d987756eab40678f241d7cd0eb7e1ca42bba7 I have applied only cdns-dsi specific patches. I think that generic framework changes should get a review from somebody closer to a core, with better view of possible consequences. Best regards,
Hello all, This series provides some crucial fixes and improvements for the Cadence's DSI TX (cdns-dsi) controller found commonly in Texas Instruments' J7 family of SoCs, as well as in Sitara AM62P and AM62L SoCs. Along with that, this series aims to fix the color-shift issue that has been going on with the DSI controller. This controller requires to be enabled before the previous entity enables its stream[0]. It's a strict requirement which, if not followed, causes the colors to "shift" on the display. The fix happens in 2 steps. 1. The bridge pre_enable calls have been shifted before the crtc_enable and the bridge post_disable calls have been shifted after the crtc_disable. This has been done as per the definition of bridge pre_enable. "The display pipe (i.e. clocks and timing signals) feeding this bridge will not yet be running when this callback is called". Since CRTC is also a source feeding the bridge, it should not be enabled before the bridges in the pipeline are pre_enabled. The sequence of enable after this patch will look like: bridge[n]_pre_enable ... bridge[1]_pre_enable crtc_enable encoder_enable bridge[1]_enable ... bridge[n]_enable and vice-versa for the bridge chain disable sequence. 2. The cdns-dsi enable / disable sequences have now been moved to pre_enable and post_disable sequences. This is the only way to have cdns-dsi drivers be up and ready before the previous entity is enables its streaming. The DSI also spec requires the Clock and Data Lanes be ready before the DSI TX enables its stream[0]. A patch has been added to make the code wait for that to happen. Going ahead with further DSI (and DSS configuration), while the lanes are not ready, has been found to be another reason for shift in colors. These patches have been tested with J721E based BeagleboneAI64 along with a RaspberryPi 7" DSI panel. The extra patches can be found in the "next_dsi-v11_1-tests" branch[1] of my github fork if anyone would like to test them. Thanks, Aradhya * Important note about the authorship of patches * All but one of the patches have been authored when I owned a "ti.com" based email id, i.e. <a-bhatia1@ti.com>. This email id is not in use anymore, and all the work done later has been part of my personal work. Since the original patches were authored using TI's email id, I have maintained the original authorships as they are, as well as their sign offs. I have further added another sign off that uses my current (and personal) email id, the one that is being used to send this revision, i.e. <aradhya.bhatia@linux.dev>. * Note on checkpatch warning in patch 11/13 * Patch 11/13 causes the checkpatch to flare up for 1 checkpatch 'check' - CHECK: Lines should not end with a '(' FILE: drivers/gpu/drm/drm_atomic_helper.c:1304: + new_crtc_state = drm_atomic_get_new_crtc_state( This patch is largely duplicating the original code, with minor differences to perform different operations. This line of code pre-exists in the file and have simply been duplicated. I have decided to keep it as is to maintain the uniformity and the originally intended readability. Should perhaps a fix be required, this patch/series is not the right place, and another patch can be created to fix this across the whole file. [0]: Section 12.6.5.7.3: "Start-up Procedure" [For DSI TX controller] in TDA4VM Technical Reference Manual https://www.ti.com/lit/zip/spruil1 [1]: https://github.com/aradhya07/linux-ab/tree/next_dsi-v11_1-tests --- Change Log: - Changes in v11: - Add patch v11:13/14 ("drm/bridge: Update the bridge enable/disable doc"), that updates the documentation about the order of the various bridge enable/disable hooks being called wrt the CRTC and encoder hooks. - Rebase on drm-misc-next instead of linux-next. As part of rebase, accommodate the following change: - Change patch v10:08/13 ("drm/bridge: cdns-dsi: Support atomic bridge APIs") to v11:08/13 ("drm/bridge: cdns-dsi: Add input format negotiation"), since Maxime has already updated the bridge hooks to their atomic versions in commit 68c98e227a96 ("drm/bridge: cdns-csi: Switch to atomic helpers"). My new patch now only adds the format negotiation hook for the cdns-dsi. (Note: Since the new patch is now only a subset of the old one, without any change in logic, I decided to carry forward the R-b and T-b tags.) - Add Alexander Sverdlin's T-b in patches 10, 11, 12. - Changes in v10: - Rebase on latest linux-next (next-20250226). - As part of rebase, update the patches to accommodate a couple of widespread changes in DRM Framework - - All the ("drm/atomic-helper: Change parameter name of ***") commits. - All the ("drm/bridge: Pass full state to ***") commits. (These updates are only trivial substitutions.) - Add Tomi Valkeinen's T-b tags in all the patches. - Changes in v9: - Fix the oops in 11/13 - where the encoder_bridge_enable _was_ pre_enabling the bridges instead of enabling. - Add the following tags: - Dmitry Baryshkov's R-b in patches 2, 10, 11, and A-b in patch 12. - Jayesh Choudhary's R-b in patch 12. - Tomi Valkeinen's R-b in patches 2, 10, 11, 12. - Changes in v8: - Move the phy de-initialization to bridge post_disable() instead of bridge disable() in patch-3. - Copy the private bridge state (dsi_cfg), in addition to the bridge_state, in patch-9. - Split patch v7:11/12 into three patches, v8:{10,11,12}/13, to separate out different refactorings into different patches, and improve bisectability. - Move patch v7:02/12 down to v8:06/12, to keep the initial patches for fixes only. - Drop patch v7:04/12 as it doesn't become relevant until patch v7:12/12. - Add R-b tags of Dmitry Baryshkov in patch-9 and patch-3, and of Tomi Valkeinen in patch-9. - Changes in v7: - phy_init()/exit() were called from the PM path in v6. Change it back to the bridge enable/disable path in patch-3, so that the phy_init() can go back to being called after D-Phy reset assert. - Reword commit text in patch-5 to explain the need of the fix. - Drop the stray code in patch-10. - Add R-b tag of Dmitry Baryshkov in patch-6. - Changes in v6: - Reword patch 3 to better explain the fixes around phy de-init. - Fix the Lane ready timeout condition in patch 7. - Fix the dsi _bridge_atomic_check() implementation by adding a new bridge state structure in patch 10. - Rework and combine patches v5:11/13 and v5:12/13 to v6:11/12. - Generate the patches of these series using the "patience" algorithm. Note: All patches, except v6:11/12, *do not* differ from their default (greedy) algorithm variants. For patch 11, the patience algorithm significantly improves the readability. - Rename and move the Bridge enable/disable enums from public to private in patch 11. - Add R-b tags of Tomi Valkeinen in patch 6, and Dmitry Baryshkov in patch 2. - Changes in v5: - Fix subject and description in patch 1/13. - Add patch to check the return value of phy_mipi_dphy_get_default_config() (patch: 6/13). - Change the Clk and Data Lane ready timeout from forever to 5s. - Print an error instead of calling WARN_ON_ONCE in patch 7/13. - Drop patch v4-07/11: "drm/bridge: cdns-dsi: Reset the DCS write FIFO". There has been some inconsistencies found with this patch upon further testing. This patch was being used to enable a DSI panel based on ILITEK ILI9881C bridge. This will be debugged separately. - Add patch to move the DSI mode check from _atomic_enable() to _atomic_check() (patch: 10/13). - Split patch v4-10/11 into 2 patches - 11/13 and 12/13. Patch 11/13 separates out the Encoder-Bridge operations into a helper function *without* changing the logic. Patch 12/13 then changes the order of the encoder-bridge operations as was intended in the original patch. - Add detailed comment for patch 13/13. - Add Tomi Valkeinen's R-b in patches 1, 2, 4, 5, 7, 8, 9, 13. - Changes in v4: - Add new patch, "drm/bridge: cdns-dsi: Move to devm_drm_of_get_bridge()", to update to an auto-managed way of finding next bridge in the chain. - Drop patch "drm/bridge: cdns-dsi: Fix the phy_initialized variable" and add "drm/bridge: cdns-dsi: Fix Phy _init() and _exit()" that properly de-initializes the Phy and maintains the initialization state. - Reword patch "drm/bridge: cdns-dsi: Reset the DCS write FIFO" to explain the HW concerns better. - Add R-b tag from Dmitry Baryshkov for patches 1/11 and 8/11. - Changes in v3: - Reword the commit message for patch "drm/bridge: cdns-dsi: Fix OF node pointer". - Add a new helper API to figure out DSI host input pixel format in patch "drm/mipi-dsi: Add helper to find input format". - Use a common function for bridge pre-enable and enable, and bridge disable and post-disable, to avoid code duplication. - Add T-b tag from Dominik Haller in patch 5/10. (Missed to add it in v2). - Add R-b tag from Dmitry Baryshkov for patch 8/10. - Changes in v2: - Drop patch "drm/tidss: Add CRTC mode_fixup" - Split patch "drm/bridge: cdns-dsi: Fix minor bugs" into 4 separate ones - Drop support for early_enable/late_disable APIs and instead re-order the pre_enable / post_disable APIs to be called before / after crtc_enable / crtc_disable. - Drop support for early_enable/late_disable in cdns-dsi and use pre_enable/post_disable APIs instead to do bridge enable/disable. Previous versions: v1: https://lore.kernel.org/all/20240511153051.1355825-1-a-bhatia1@ti.com/ v2: https://lore.kernel.org/all/20240530093621.1925863-1-a-bhatia1@ti.com/ v3: https://lore.kernel.org/all/20240617105311.1587489-1-a-bhatia1@ti.com/ v4: https://lore.kernel.org/all/20240622110929.3115714-1-a-bhatia1@ti.com/ v5: https://lore.kernel.org/all/20241019195411.266860-1-aradhya.bhatia@linux.dev/ v6: https://lore.kernel.org/all/20250111192738.308889-1-aradhya.bhatia@linux.dev/ v7: https://lore.kernel.org/all/20250114055626.18816-1-aradhya.bhatia@linux.dev/ v8: https://lore.kernel.org/all/20250126191551.741957-1-aradhya.bhatia@linux.dev/ v9: https://lore.kernel.org/all/20250209121032.32655-1-aradhya.bhatia@linux.dev/ v10: https://lore.kernel.org/all/20250226155228.564289-1-aradhya.bhatia@linux.dev/ Aradhya Bhatia (14): drm/bridge: cdns-dsi: Fix connecting to next bridge drm/bridge: cdns-dsi: Fix phy de-init and flag it so drm/bridge: cdns-dsi: Fix the clock variable for mode_valid() drm/bridge: cdns-dsi: Check return value when getting default PHY config drm/bridge: cdns-dsi: Wait for Clk and Data Lanes to be ready drm/bridge: cdns-dsi: Move to devm_drm_of_get_bridge() drm/mipi-dsi: Add helper to find input format drm/bridge: cdns-dsi: Add input format negotiation drm/bridge: cdns-dsi: Move DSI mode check to _atomic_check() drm/atomic-helper: Refactor crtc & encoder-bridge op loops into separate functions drm/atomic-helper: Separate out bridge pre_enable/post_disable from enable/disable drm/atomic-helper: Re-order bridge chain pre-enable and post-disable drm/bridge: Update the bridge enable/disable doc drm/bridge: cdns-dsi: Use pre_enable/post_disable to enable/disable .../gpu/drm/bridge/cadence/cdns-dsi-core.c | 227 +++++++++++++----- .../gpu/drm/bridge/cadence/cdns-dsi-core.h | 2 - drivers/gpu/drm/drm_atomic_helper.c | 160 ++++++++++-- drivers/gpu/drm/drm_mipi_dsi.c | 37 +++ include/drm/drm_bridge.h | 216 ++++++++++++----- include/drm/drm_mipi_dsi.h | 1 + 6 files changed, 496 insertions(+), 147 deletions(-) base-commit: c8ba07caaecc622a9922cda49f24790821af8a71