@@ -133,85 +133,6 @@ static void omap3_save_secure_ram_context(void)
}
}
-/*
- * PRCM Interrupt Handler Helper Function
- *
- * The purpose of this function is to clear any wake-up events latched
- * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
- * may occur whilst attempting to clear a PM_WKST_x register and thus
- * set another bit in this register. A while loop is used to ensure
- * that any peripheral wake-up events occurring while attempting to
- * clear the PM_WKST_x are detected and cleared.
- */
-static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
-{
- u32 wkst, fclk, iclk, clken;
- u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
- u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
- u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
- u16 grpsel_off = (regs == 3) ?
- OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
- int c = 0;
-
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
- wkst &= ~ignore_bits;
- if (wkst) {
- iclk = omap2_cm_read_mod_reg(module, iclk_off);
- fclk = omap2_cm_read_mod_reg(module, fclk_off);
- while (wkst) {
- clken = wkst;
- omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
- /*
- * For USBHOST, we don't know whether HOST1 or
- * HOST2 woke us up, so enable both f-clocks
- */
- if (module == OMAP3430ES2_USBHOST_MOD)
- clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
- omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
- omap2_prm_write_mod_reg(wkst, module, wkst_off);
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= ~ignore_bits;
- c++;
- }
- omap2_cm_write_mod_reg(iclk, module, iclk_off);
- omap2_cm_write_mod_reg(fclk, module, fclk_off);
- }
-
- return c;
-}
-
-static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
-{
- int c;
-
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
-
- return c ? IRQ_HANDLED : IRQ_NONE;
-}
-
-static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
-{
- int c;
-
- /*
- * Clear all except ST_IO and ST_IO_CHAIN for wkup module,
- * these are handled in a separate handler to avoid acking
- * IO events before parsing in mux code
- */
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
- c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
- c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
- if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
- c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
- }
-
- return c ? IRQ_HANDLED : IRQ_NONE;
-}
-
static void omap34xx_save_context(u32 *save)
{
u32 val;
@@ -671,29 +592,10 @@ int __init omap3_pm_init(void)
* supervised mode for powerdomains */
prcm_setup_regs();
- ret = request_irq(omap_prcm_event_to_irq("wkup"),
- _prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "pm_wkup", NULL);
-
- if (ret) {
- pr_err("pm: Failed to request pm_wkup irq\n");
- goto err1;
- }
-
- /* IO interrupt is shared with mux code */
- ret = request_irq(omap_prcm_event_to_irq("io"),
- _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
- omap3_pm_init);
- enable_irq(omap_prcm_event_to_irq("io"));
-
- if (ret) {
- pr_err("pm: Failed to request pm_io irq\n");
- goto err2;
- }
-
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains\n");
- goto err3;
+ goto err;
}
(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
@@ -702,7 +604,7 @@ int __init omap3_pm_init(void)
if (mpu_pwrdm == NULL) {
pr_err("Failed to get mpu_pwrdm\n");
ret = -EINVAL;
- goto err3;
+ goto err;
}
neon_pwrdm = pwrdm_lookup("neon_pwrdm");
@@ -750,14 +652,11 @@ int __init omap3_pm_init(void)
omap3_save_scratchpad_contents();
return ret;
-err3:
+err:
list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
list_del(&pwrst->node);
kfree(pwrst);
}
- free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init);
-err2:
- free_irq(omap_prcm_event_to_irq("wkup"), NULL);
-err1:
+
return ret;
}
@@ -466,6 +466,7 @@ struct omap_prcm_irq {
* @ocp_barrier: fn ptr to force buffered PRM writes to complete
* @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
* @restore_irqen: fn ptr to save and clear IRQENABLE regs
+ * @ack_pending_events: fn ptr to ack pending events after handling
* @saved_mask: IRQENABLE regs are saved here during suspend
* @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true
* @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init
@@ -487,18 +488,17 @@ struct omap_prcm_irq_setup {
void (*ocp_barrier)(void);
void (*save_and_clear_irqen)(u32 *saved_mask);
void (*restore_irqen)(u32 *saved_mask);
+ void (*ack_pending_events)(unsigned long *events);
u32 *saved_mask;
- u32 *priority_mask;
int base_irq;
bool suspended;
bool suspend_save_flag;
};
/* OMAP_PRCM_IRQ: convenience macro for creating struct omap_prcm_irq records */
-#define OMAP_PRCM_IRQ(_name, _offset, _priority) { \
- .name = _name, \
- .offset = _offset, \
- .priority = _priority \
+#define OMAP_PRCM_IRQ(_name, _offset) { \
+ .name = _name, \
+ .offset = _offset, \
}
extern void omap_prcm_irq_cleanup(void);
@@ -16,6 +16,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
#include "common.h"
#include <plat/cpu.h>
@@ -28,10 +29,11 @@
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
+#include "cm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
- OMAP_PRCM_IRQ("wkup", 0, 0),
- OMAP_PRCM_IRQ("io", 9, 1),
+ OMAP_PRCM_IRQ("wkup", 0),
+ OMAP_PRCM_IRQ("io", 9),
};
static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
@@ -45,6 +47,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
.ocp_barrier = &omap3xxx_prm_ocp_barrier,
.save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
.restore_irqen = &omap3xxx_prm_restore_irqen,
+ .ack_pending_events = &omap3xxx_prm_clear_wakeups,
};
u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
@@ -349,18 +352,127 @@ static void __init omap3xxx_prm_enable_io_wakeup(void)
PM_WKEN);
}
+/**
+ * prcm_clear_mod_irqs - clear module level wakeup irqs for omap3
+ * @module: prm module to clear
+ * @regs: register set to use, either 1 or 3
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared. Returns the number
+ * of active wakeup events detected, or 0 if none.
+ */
+static int _prcm_clear_mod_irqs(s16 module, u8 regs)
+{
+ u32 wkst, fclk, iclk, clken;
+ u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+ u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+ u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+ u16 grpsel_off = (regs == 3) ?
+ OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+ int c = 0;
+
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
+ if (wkst) {
+ iclk = omap2_cm_read_mod_reg(module, iclk_off);
+ fclk = omap2_cm_read_mod_reg(module, fclk_off);
+ while (wkst) {
+ clken = wkst;
+ omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
+ /*
+ * For USBHOST, we don't know whether HOST1 or
+ * HOST2 woke us up, so enable both f-clocks
+ */
+ if (module == OMAP3430ES2_USBHOST_MOD)
+ clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+ omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
+ omap2_prm_write_mod_reg(wkst, module, wkst_off);
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ c++;
+ }
+ omap2_cm_write_mod_reg(iclk, module, iclk_off);
+ omap2_cm_write_mod_reg(fclk, module, fclk_off);
+ }
+
+ return c;
+}
+
+/**
+ * omap3xxx_prm_clear_wakeups - clears wakeup event sources
+ * @events: active PRCM interrupt event mask
+ *
+ * This function will first check if PRCM chain handler detected
+ * a wakeup event or not. If yes, it will continue to clear any
+ * pending wakeup events from PRCM module. Typically the module
+ * will generate an actual interrupt together with the wakeup event,
+ * which will then be handled separately by the driver code.
+ */
+void omap3xxx_prm_clear_wakeups(unsigned long *events)
+{
+ int c;
+
+ /*
+ * If we didn't come here because of a wakeup event, do nothing
+ */
+ if (!(events[0] & OMAP3430_WKUP_ST_MASK))
+ return;
+
+ c = _prcm_clear_mod_irqs(WKUP_MOD, 1);
+ c += _prcm_clear_mod_irqs(CORE_MOD, 1);
+ c += _prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ c += _prcm_clear_mod_irqs(CORE_MOD, 3);
+ c += _prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
+ }
+}
+
+/**
+ * _prcm_int_handle_wakeup - dummy irq handler for prcm wakeup event
+ * @irq: not used, irq common API
+ * @unused: not used, irq common API
+ *
+ * Dummy handler for PRCM wakeup event interrupt. On software level,
+ * this handler doesn't do anything, but it is needed for hardware
+ * to function properly. Adding this handler will enable the wakeup
+ * event generation from PRCM, which is needed to get CPU out of
+ * WFI. Otherwise the CPU will get stuck on the WFI instruction
+ * indefinitely, as the MPU powerdomain remains idle.
+ */
+static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
+{
+ return IRQ_HANDLED;
+}
+
static int __init omap3xxx_prcm_init(void)
{
- int ret = 0;
+ int ret;
if (cpu_is_omap34xx()) {
omap3xxx_prm_enable_io_wakeup();
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- if (!ret)
- irq_set_status_flags(omap_prcm_event_to_irq("io"),
- IRQ_NOAUTOEN);
+ if (ret) {
+ pr_err("%s: failed to register chain handler: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = request_irq(omap_prcm_event_to_irq("wkup"),
+ _prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "prcm_wkup",
+ NULL);
+ if (ret) {
+ pr_err("%s: failed to request prcm_wkup irq: %d\n",
+ __func__, ret);
+ goto err;
+ }
}
+ return 0;
+err:
+ omap_prcm_irq_cleanup();
return ret;
}
subsys_initcall(omap3xxx_prcm_init);
@@ -322,6 +322,7 @@ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
extern void omap3xxx_prm_ocp_barrier(void);
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+extern void omap3xxx_prm_clear_wakeups(unsigned long *events);
#endif /* CONFIG_ARCH_OMAP4 */
@@ -30,8 +30,8 @@
#include "prminst44xx.h"
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
- OMAP_PRCM_IRQ("wkup", 0, 0),
- OMAP_PRCM_IRQ("io", 9, 1),
+ OMAP_PRCM_IRQ("wkup", 0),
+ OMAP_PRCM_IRQ("io", 9),
};
static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
@@ -57,21 +57,6 @@ static struct omap_prcm_irq_setup *prcm_irq_setup;
/* Private functions */
/*
- * Move priority events from events to priority_events array
- */
-static void omap_prcm_events_filter_priority(unsigned long *events,
- unsigned long *priority_events)
-{
- int i;
-
- for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
- priority_events[i] =
- events[i] & prcm_irq_setup->priority_mask[i];
- events[i] ^= priority_events[i];
- }
-}
-
-/*
* PRCM Interrupt Handler
*
* This is a common handler for the OMAP PRCM interrupts. Pending
@@ -82,7 +67,6 @@ static void omap_prcm_events_filter_priority(unsigned long *events,
static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG];
- unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int virtirq;
int nr_irqs = prcm_irq_setup->nr_regs * 32;
@@ -113,20 +97,19 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
if (find_first_bit(pending, nr_irqs) >= nr_irqs)
break;
- omap_prcm_events_filter_priority(pending, priority_pending);
-
/*
* Loop on all currently pending irqs so that new irqs
* cannot starve previously pending irqs
*/
-
- /* Serve priority events first */
- for_each_set_bit(virtirq, priority_pending, nr_irqs)
- generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
-
- /* Serve normal events next */
for_each_set_bit(virtirq, pending, nr_irqs)
generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
+
+ /*
+ * Ack pending events if needed, this will clean the
+ * wakeup events on omap3
+ */
+ if (prcm_irq_setup->ack_pending_events)
+ prcm_irq_setup->ack_pending_events(pending);
}
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
@@ -191,9 +174,6 @@ void omap_prcm_irq_cleanup(void)
kfree(prcm_irq_setup->saved_mask);
prcm_irq_setup->saved_mask = NULL;
- kfree(prcm_irq_setup->priority_mask);
- prcm_irq_setup->priority_mask = NULL;
-
irq_set_chained_handler(prcm_irq_setup->irq, NULL);
if (prcm_irq_setup->base_irq > 0)
@@ -262,11 +242,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
prcm_irq_chips = kzalloc(sizeof(void *) * nr_regs, GFP_KERNEL);
prcm_irq_setup->saved_mask = kzalloc(sizeof(u32) * nr_regs, GFP_KERNEL);
- prcm_irq_setup->priority_mask = kzalloc(sizeof(u32) * nr_regs,
- GFP_KERNEL);
- if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
- !prcm_irq_setup->priority_mask) {
+ if (!prcm_irq_chips || !prcm_irq_setup->saved_mask) {
pr_err("PRCM: kzalloc failed\n");
goto err;
}
@@ -276,9 +253,6 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
for (i = 0; i < irq_setup->nr_irqs; i++) {
offset = irq_setup->irqs[i].offset;
mask[offset >> 5] |= 1 << (offset & 0x1f);
- if (irq_setup->irqs[i].priority)
- irq_setup->priority_mask[offset >> 5] |=
- 1 << (offset & 0x1f);
}
irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler);
PM code doesn't really care about the PRCM wakeup + io interrupts on OMAP3, as these are used only for acking PRCM internal events, and the IO chain handler is taken care of by hwmod code. Thus move the interrupt handling logic from pm34xx.c to prm2xxx_3xxx.c file. This patch also includes a minor cleanup for removing the priority handling and replacing it with a mechanism for acking pending events. This gets rid of the need for registering the shared interrupt handlers in specific order. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/mach-omap2/pm34xx.c | 109 +------------------------------ arch/arm/mach-omap2/prcm-common.h | 10 ++-- arch/arm/mach-omap2/prm2xxx_3xxx.c | 124 ++++++++++++++++++++++++++++++++++-- arch/arm/mach-omap2/prm2xxx_3xxx.h | 1 + arch/arm/mach-omap2/prm44xx.c | 4 +- arch/arm/mach-omap2/prm_common.c | 42 ++---------- 6 files changed, 138 insertions(+), 152 deletions(-)