diff mbox

[1/2] drivers/mfd: Add realtek pcie card reader driver

Message ID 1344922213-19581-1-git-send-email-wei_wang@realsil.com.cn (mailing list archive)
State Superseded, archived
Headers show

Commit Message

wei_wang@realsil.com.cn Aug. 14, 2012, 5:30 a.m. UTC
From: Wei WANG <wei_wang@realsil.com.cn>

Realtek PCI-E card reader driver adapts requests from upper-level
sdmmc/memstick layer to the real physical card reader.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/Kconfig             |    9 +
 drivers/mfd/Makefile            |    4 +
 drivers/mfd/rts5209.c           |  102 +++
 drivers/mfd/rts5229.c           |  117 ++++
 drivers/mfd/rtsx_pcr.c          | 1464 +++++++++++++++++++++++++++++++++++++++
 drivers/mfd/rtsx_pcr.h          |   31 +
 include/linux/mfd/rtsx_common.h |   47 ++
 include/linux/mfd/rtsx_pci.h    |  692 ++++++++++++++++++
 8 files changed, 2466 insertions(+)
 create mode 100644 drivers/mfd/rts5209.c
 create mode 100644 drivers/mfd/rts5229.c
 create mode 100644 drivers/mfd/rtsx_pcr.c
 create mode 100644 drivers/mfd/rtsx_pcr.h
 create mode 100644 include/linux/mfd/rtsx_common.h
 create mode 100644 include/linux/mfd/rtsx_pci.h

Comments

Arnd Bergmann Aug. 14, 2012, 9:32 a.m. UTC | #1
On Tuesday 14 August 2012, wei_wang@realsil.com.cn wrote:
> From: Wei WANG <wei_wang@realsil.com.cn>
> 
> Realtek PCI-E card reader driver adapts requests from upper-level
> sdmmc/memstick layer to the real physical card reader.
> 
> Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>

When you post a new version of patches, please add a version number in the
subject line, like " [PATCH v3 1/2] drivers/mfd: Add realtek pcie card
reader driver", to make it easier for people to know what has changed.
It's also helpful to have a "[PATCH 0/XX]" as 'git format-patch
--cover-letter' generates and list the changes to the previous versions
of your patch in there. Best combine this with 'git send-email --thread
--no-chain-reply', so all patches are sent in the same email thread as
the introductory mail.

Finally, when you get an 'Acked-by' or 'Reviewed-by' tag from someone,
please add that below your Signed-off-by.

Your patches both look fine now, so you can add my

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
wei_wang@realsil.com.cn Aug. 14, 2012, 9:46 a.m. UTC | #2
? 2012?08?14? 17:32, Arnd Bergmann ??:
> When you post a new version of patches, please add a version number in the
> subject line, like " [PATCH v3 1/2] drivers/mfd: Add realtek pcie card
> reader driver", to make it easier for people to know what has changed.
> It's also helpful to have a "[PATCH 0/XX]" as 'git format-patch
> --cover-letter' generates and list the changes to the previous versions
> of your patch in there. Best combine this with 'git send-email --thread
> --no-chain-reply', so all patches are sent in the same email thread as
> the introductory mail.
>
> Finally, when you get an 'Acked-by' or 'Reviewed-by' tag from someone,
> please add that below your Signed-off-by.
>
> Your patches both look fine now, so you can add my
>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
>
> 	Arnd

Hi Arnd:

OK. I will resend both of the patches according to your suggestion.

Thank you so much!

BR,
wwang
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d1facef..4c07a34 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -63,6 +63,15 @@  config MFD_SM501_GPIO
 	 lines on the SM501. The platform data is used to supply the
 	 base number for the first GPIO line to register.
 
+config MFD_RTSX_PCI
+	tristate "Support for Realtek PCI-E driver-based card reader"
+	depends on PCI
+	help
+	  This supports for Realtek PCI-Express driver-based card reader including
+	  rts5209, rts5229, etc. Realtek driver-based card reader supports access
+	  to many types of memory cards, such as Memory Stick, Memory Stick Pro,
+	  Secure Digital and MultiMediaCard.
+
 config MFD_ASIC3
 	bool "Support for Compaq ASIC3"
 	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 79dd22d..e8cdc7b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -9,6 +9,9 @@  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
 
+rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o
+obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
+
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
@@ -132,3 +135,4 @@  obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_ANATOP)	+= anatop-mfd.o
 obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
+obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
new file mode 100644
index 0000000..6e23568
--- /dev/null
+++ b/drivers/mfd/rts5209.c
@@ -0,0 +1,102 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/mfd/rtsx_pci.h>
+
+static u8 rts5209_get_ic_version(struct rtsx_pcr *pcr)
+{
+	u8 val;
+
+	val = rtsx_pci_readb(pcr, 0x1C);
+	return val & 0x0F;
+}
+
+static int rts5209_extra_init_hw(struct rtsx_pcr *pcr)
+{
+	return 0;
+}
+
+static int rts5209_optimize_phy(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_phy_register(pcr, 0x00, 0xB966);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5209_turn_on_led(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, 0xFD58, 0x01, 0x00);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5209_turn_off_led(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, 0xFD58, 0x01, 0x01);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5209_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0xFF, 0x0D);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5209_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0x08, 0x00);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+const struct pcr_ops rts5209_pcr_ops = {
+	.get_ic_version = rts5209_get_ic_version,
+	.extra_init_hw = rts5209_extra_init_hw,
+	.optimize_phy = rts5209_optimize_phy,
+	.turn_on_led = rts5209_turn_on_led,
+	.turn_off_led = rts5209_turn_off_led,
+	.enable_auto_blink = rts5209_enable_auto_blink,
+	.disable_auto_blink = rts5209_disable_auto_blink,
+};
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
new file mode 100644
index 0000000..85fc8a2
--- /dev/null
+++ b/drivers/mfd/rts5229.c
@@ -0,0 +1,117 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/mfd/rtsx_pci.h>
+
+static u8 rts5229_get_ic_version(struct rtsx_pcr *pcr)
+{
+	u8 val;
+
+	rtsx_pci_read_register(pcr, 0xFE90, &val);
+	return val & 0x0F;
+}
+
+static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	rtsx_pci_init_cmd(pcr);
+
+	/* Switch LDO3318 source from DV33 to card_3v3 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFE78, 0x03, 0x00);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFE78, 0x03, 0x01);
+	/* LED shine disabled, set initial shine cycle period */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFC1E, 0x0F, 0x02);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5229_optimize_phy(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	/* Optimize RX sensitivity */
+	err = rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5229_turn_on_led(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, 0xFC1F, 0x02, 0x02);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5229_turn_off_led(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, 0xFC1F, 0x02, 0x00);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5229_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, 0xFC1E, 0x08, 0x08);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5229_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, 0xFC1E, 0x08, 0x00);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+const struct pcr_ops rts5229_pcr_ops = {
+	.get_ic_version = rts5229_get_ic_version,
+	.extra_init_hw = rts5229_extra_init_hw,
+	.optimize_phy = rts5229_optimize_phy,
+	.turn_on_led = rts5229_turn_on_led,
+	.turn_off_led = rts5229_turn_off_led,
+	.enable_auto_blink = rts5229_enable_auto_blink,
+	.disable_auto_blink = rts5229_disable_auto_blink,
+};
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
new file mode 100644
index 0000000..ce13dac
--- /dev/null
+++ b/drivers/mfd/rtsx_pcr.c
@@ -0,0 +1,1464 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/idr.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/rtsx_pci.h>
+#include <asm/unaligned.h>
+
+#include "rtsx_pcr.h"
+
+static bool msi_en = true;
+module_param(msi_en, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(msi_en, "Enable MSI");
+
+static struct workqueue_struct *workqueue;
+static DEFINE_IDR(rtsx_pci_idr);
+static DEFINE_SPINLOCK(rtsx_pci_lock);
+
+static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
+	{ 0x10EC, 0x5209, PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ 0x10EC, 0x5229, PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, rtsx_pci_ids);
+
+void rtsx_pci_start_run(struct rtsx_pcr *pcr)
+{
+	/* If pci device removed, don't queue idle work any more */
+	if (pcr->remove_pci)
+		return;
+
+	if (pcr->state != PDEV_STAT_RUN) {
+		pcr->state = PDEV_STAT_RUN;
+		pcr->ops->enable_auto_blink(pcr);
+	}
+
+	mod_timer(&pcr->idle_timer, jiffies + msecs_to_jiffies(200));
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_start_run);
+
+int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data)
+{
+	int i;
+	u32 val = 3 << 30;
+
+	val |= (u32)(addr & 0x3FFF) << 16;
+	val |= (u32)mask << 8;
+	val |= (u32)data;
+
+	rtsx_pci_writel(pcr, RTSX_HAIMR, val);
+
+	for (i = 0; i < MAX_RW_REG_CNT; i++) {
+		val = rtsx_pci_readl(pcr, RTSX_HAIMR);
+		if ((val & (1 << 31)) == 0) {
+			if (data != (u8)val)
+				return -EIO;
+			return 0;
+		}
+	}
+
+	return -ETIMEDOUT;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_register);
+
+int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data)
+{
+	u32 val = 2 << 30;
+	int i;
+
+	val |= (u32)(addr & 0x3FFF) << 16;
+	rtsx_pci_writel(pcr, RTSX_HAIMR, val);
+
+	for (i = 0; i < MAX_RW_REG_CNT; i++) {
+		val = rtsx_pci_readl(pcr, RTSX_HAIMR);
+		if ((val & (1 << 31)) == 0)
+			break;
+	}
+
+	if (i >= MAX_RW_REG_CNT)
+		return -ETIMEDOUT;
+
+	if (data)
+		*data = (u8)(val & 0xFF);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_register);
+
+int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
+{
+	int err, i, finished = 0;
+	u8 tmp;
+
+	rtsx_pci_init_cmd(pcr);
+
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA0, 0xFF, (u8)val);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA1, 0xFF, (u8)(val >> 8));
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x81);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < 100000; i++) {
+		err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
+		if (err < 0)
+			return err;
+
+		if (!(tmp & 0x80)) {
+			finished = 1;
+			break;
+		}
+	}
+
+	if (!finished)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_phy_register);
+
+int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
+{
+	int err, i, finished = 0;
+	u16 data = 0;
+	u8 *ptr, tmp;
+
+	rtsx_pci_init_cmd(pcr);
+
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x80);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < 100000; i++) {
+		err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
+		if (err < 0)
+			return err;
+
+		if (!(tmp & 0x80)) {
+			finished = 1;
+			break;
+		}
+	}
+
+	if (!finished)
+		return -ETIMEDOUT;
+
+	rtsx_pci_init_cmd(pcr);
+
+	rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA0, 0, 0);
+	rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA1, 0, 0);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	ptr = rtsx_pci_get_cmd_data(pcr);
+	data = ((u16)ptr[1] << 8) | ptr[0];
+
+	if (val)
+		*val = data;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_phy_register);
+
+void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
+{
+	rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD);
+	rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA);
+
+	rtsx_pci_write_register(pcr, DMACTL, 0x80, 0x80);
+	rtsx_pci_write_register(pcr, RBCTL, 0x80, 0x80);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_stop_cmd);
+
+void rtsx_pci_add_cmd(struct rtsx_pcr *pcr,
+		u8 cmd_type, u16 reg_addr, u8 mask, u8 data)
+{
+	unsigned long flags;
+	u32 val = 0;
+	u32 *ptr = (u32 *)(pcr->host_cmds_ptr);
+
+	val |= (u32)(cmd_type & 0x03) << 30;
+	val |= (u32)(reg_addr & 0x3FFF) << 16;
+	val |= (u32)mask << 8;
+	val |= (u32)data;
+
+	spin_lock_irqsave(&pcr->lock, flags);
+	ptr += pcr->ci;
+	if (pcr->ci < (HOST_CMDS_BUF_LEN / 4)) {
+		put_unaligned_le32(val, ptr);
+		ptr++;
+		pcr->ci++;
+	}
+	spin_unlock_irqrestore(&pcr->lock, flags);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_add_cmd);
+
+void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr)
+{
+	u32 val = 1 << 31;
+
+	rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+	val |= (u32)(pcr->ci * 4) & 0x00FFFFFF;
+	/* Hardware Auto Response */
+	val |= 0x40000000;
+	rtsx_pci_writel(pcr, RTSX_HCBCTLR, val);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_send_cmd_no_wait);
+
+int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout)
+{
+	struct completion trans_done;
+	u32 val = 1 << 31;
+	long timeleft;
+	unsigned long flags;
+	int err = 0;
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	/* set up data structures for the wakeup system */
+	pcr->done = &trans_done;
+	pcr->trans_result = TRANS_NOT_READY;
+	init_completion(&trans_done);
+	pcr->trans_state = STATE_TRANS_CMD;
+
+	rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+	val |= (u32)(pcr->ci * 4) & 0x00FFFFFF;
+	/* Hardware Auto Response */
+	val |= 0x40000000;
+	rtsx_pci_writel(pcr, RTSX_HCBCTLR, val);
+
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	/* Wait for TRANS_OK_INT */
+	timeleft = wait_for_completion_interruptible_timeout(
+			&trans_done, msecs_to_jiffies(timeout));
+	if (timeleft <= 0) {
+		dev_dbg(&(pcr->pci->dev), "pcr->int_reg = 0x%x\n",
+				pcr->int_reg);
+		err = -ETIMEDOUT;
+		goto finish_send_cmd;
+	}
+
+	spin_lock_irqsave(&pcr->lock, flags);
+	if (pcr->trans_result == TRANS_RESULT_FAIL)
+		err = -EINVAL;
+	else if (pcr->trans_result == TRANS_RESULT_OK)
+		err = 0;
+	else if (pcr->trans_result == TRANS_NO_DEVICE)
+		err = -ENODEV;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+finish_send_cmd:
+	spin_lock_irqsave(&pcr->lock, flags);
+	pcr->done = NULL;
+	pcr->trans_state = STATE_TRANS_NONE;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	if ((err < 0) && (err != -ENODEV))
+		rtsx_pci_stop_cmd(pcr);
+
+	if (pcr->finish_me)
+		complete(pcr->finish_me);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_send_cmd);
+
+/**
+ * The length field is 20-bit long. So if the buffer length is
+ * longer than 0x80000, this function will divide the buffer into
+ * several small buffers to ensure the length field won't overflow.
+ */
+static void rtsx_pci_add_sg_tbl(struct rtsx_pcr *pcr,
+		u32 addr, u32 len, u8 option)
+{
+	u64 *ptr = (u64 *)(pcr->host_sg_tbl_ptr);
+	u64 val = 0;
+	u32 temp_len = 0;
+	u8  temp_opt = 0;
+
+	ptr += pcr->sgi;
+	do {
+		if (len > 0x80000) {
+			temp_len = 0x80000;
+			temp_opt = option & (~SG_END);
+		} else {
+			temp_len = len;
+			temp_opt = option;
+		}
+		val = ((u64)addr << 32) | ((u64)temp_len << 12) | temp_opt;
+
+		if (pcr->sgi < (HOST_SG_TBL_BUF_LEN / 8)) {
+			put_unaligned_le64(val, ptr);
+			ptr++;
+			pcr->sgi++;
+		}
+
+		len -= temp_len;
+		addr += temp_len;
+	} while (len);
+}
+
+static int rtsx_pci_transfer_sglist_adma(struct rtsx_pcr *pcr,
+		struct scatterlist *sg, int num_sg, int read, int timeout)
+{
+	struct completion trans_done;
+	u8 dir;
+	int buf_cnt, i;
+	int err = 0;
+	long timeleft;
+	unsigned long flags;
+	struct scatterlist *sg_ptr;
+	enum dma_data_direction dma_dir;
+
+	if ((sg == NULL) || (num_sg <= 0))
+		return -EINVAL;
+
+	if (read) {
+		dir = DEVICE_TO_HOST;
+		dma_dir = DMA_FROM_DEVICE;
+	} else {
+		dir = HOST_TO_DEVICE;
+		dma_dir = DMA_TO_DEVICE;
+	}
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	/* set up data structures for the wakeup system */
+	pcr->done = &trans_done;
+	pcr->trans_state = STATE_TRANS_SG;
+	pcr->trans_result = TRANS_NOT_READY;
+
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	buf_cnt = dma_map_sg(&(pcr->pci->dev), sg, num_sg, dma_dir);
+
+	sg_ptr = sg;
+	for (i = 0; i <= buf_cnt / (HOST_SG_TBL_BUF_LEN / 8); i++) {
+		u32 val = TRIG_DMA;
+		int sg_cnt, j;
+
+		if (i == buf_cnt / (HOST_SG_TBL_BUF_LEN / 8))
+			sg_cnt = buf_cnt % (HOST_SG_TBL_BUF_LEN / 8);
+		else
+			sg_cnt = (HOST_SG_TBL_BUF_LEN / 8);
+
+		pcr->sgi = 0;
+		for (j = 0; j < sg_cnt; j++) {
+			dma_addr_t addr = sg_dma_address(sg_ptr);
+			unsigned int len = sg_dma_len(sg_ptr);
+			u8 option;
+
+			dev_dbg(&(pcr->pci->dev),
+					"DMA addr: 0x%x, Len: 0x%x\n",
+					(unsigned int)addr, len);
+
+			if (j == (sg_cnt - 1))
+				option = SG_VALID | SG_END | SG_TRANS_DATA;
+			else
+				option = SG_VALID | SG_TRANS_DATA;
+
+			rtsx_pci_add_sg_tbl(pcr, (u32)addr, (u32)len, option);
+			sg_ptr = sg_next(sg_ptr);
+		}
+
+		dev_dbg(&(pcr->pci->dev), "SG table count = %d\n", pcr->sgi);
+
+		val |= (u32)(dir & 0x01) << 29;
+		val |= ADMA_MODE;
+
+		spin_lock_irqsave(&pcr->lock, flags);
+
+		init_completion(&trans_done);
+
+		rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr);
+		rtsx_pci_writel(pcr, RTSX_HDBCTLR, val);
+
+		spin_unlock_irqrestore(&pcr->lock, flags);
+
+		timeleft = wait_for_completion_interruptible_timeout(
+				&trans_done, msecs_to_jiffies(timeout));
+		if (timeleft <= 0) {
+			dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
+					__func__, __LINE__);
+			err = -ETIMEDOUT;
+			goto out;
+		}
+
+		spin_lock_irqsave(&pcr->lock, flags);
+		if (pcr->trans_result == TRANS_RESULT_FAIL) {
+			err = -EINVAL;
+			spin_unlock_irqrestore(&pcr->lock, flags);
+			goto out;
+		} else if (pcr->trans_result == TRANS_NO_DEVICE) {
+			err = -ENODEV;
+			spin_unlock_irqrestore(&pcr->lock, flags);
+			goto out;
+		}
+		spin_unlock_irqrestore(&pcr->lock, flags);
+
+		sg_ptr += sg_cnt;
+	}
+
+	/* Wait for TRANS_OK_INT */
+	spin_lock_irqsave(&pcr->lock, flags);
+	if (pcr->trans_result == TRANS_NOT_READY) {
+		init_completion(&trans_done);
+		spin_unlock_irqrestore(&pcr->lock, flags);
+		timeleft = wait_for_completion_interruptible_timeout(
+				&trans_done, msecs_to_jiffies(timeout));
+		if (timeleft <= 0) {
+			dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
+					__func__, __LINE__);
+			err = -ETIMEDOUT;
+			goto out;
+		}
+	} else {
+		spin_unlock_irqrestore(&pcr->lock, flags);
+	}
+
+	spin_lock_irqsave(&pcr->lock, flags);
+	if (pcr->trans_result == TRANS_RESULT_FAIL)
+		err = -EINVAL;
+	else if (pcr->trans_result == TRANS_RESULT_OK)
+		err = 0;
+	else if (pcr->trans_result == TRANS_NO_DEVICE)
+		err = -ENODEV;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+out:
+	spin_lock_irqsave(&pcr->lock, flags);
+	pcr->done = NULL;
+	pcr->trans_state = STATE_TRANS_NONE;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	dma_unmap_sg(&(pcr->pci->dev), sg, num_sg, dma_dir);
+
+	if ((err < 0) && (err != -ENODEV))
+		rtsx_pci_stop_cmd(pcr);
+
+	if (pcr->finish_me)
+		complete(pcr->finish_me);
+
+	return err;
+}
+
+static int rtsx_pci_transfer_buf(struct rtsx_pcr *pcr,
+		void *buf, size_t len, int read, int timeout)
+{
+	struct completion trans_done;
+	dma_addr_t addr;
+	u8 dir;
+	int err = 0;
+	u32 val = (1 << 31);
+	long timeleft;
+	unsigned long flags;
+	enum dma_data_direction dma_dir;
+
+	if ((buf == NULL) || (len <= 0))
+		return -EINVAL;
+
+	if (read) {
+		dir = DEVICE_TO_HOST;
+		dma_dir = DMA_FROM_DEVICE;
+	} else {
+		dir = HOST_TO_DEVICE;
+		dma_dir = DMA_TO_DEVICE;
+	}
+
+	addr = dma_map_single(&(pcr->pci->dev), buf, len, dma_dir);
+	if (!addr)
+		return -EINVAL;
+
+	val |= (u32)(dir & 0x01) << 29;
+	val |= (u32)(len & 0x00FFFFFF);
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	/* set up data structures for the wakeup system */
+	pcr->done = &trans_done;
+
+	init_completion(&trans_done);
+
+	pcr->trans_state = STATE_TRANS_BUF;
+	pcr->trans_result = TRANS_NOT_READY;
+
+	rtsx_pci_writel(pcr, RTSX_HDBAR, addr);
+	rtsx_pci_writel(pcr, RTSX_HDBCTLR, val);
+
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	/* Wait for TRANS_OK_INT */
+	timeleft = wait_for_completion_interruptible_timeout(&trans_done,
+			msecs_to_jiffies(timeout));
+	if (timeleft <= 0) {
+		dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
+				__func__, __LINE__);
+		err = -ETIMEDOUT;
+		goto out;
+	}
+
+	spin_lock_irqsave(&pcr->lock, flags);
+	if (pcr->trans_result == TRANS_RESULT_FAIL)
+		err = -EINVAL;
+	else if (pcr->trans_result == TRANS_RESULT_OK)
+		err = 0;
+	else if (pcr->trans_result == TRANS_NO_DEVICE)
+		err = -ENODEV;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+out:
+	spin_lock_irqsave(&pcr->lock, flags);
+	pcr->done = NULL;
+	pcr->trans_state = STATE_TRANS_NONE;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	dma_unmap_single(&(pcr->pci->dev), addr, len, dma_dir);
+
+	if ((err < 0) && (err != -ENODEV))
+		rtsx_pci_stop_cmd(pcr);
+
+	if (pcr->finish_me)
+		complete(pcr->finish_me);
+
+	return err;
+}
+
+int rtsx_pci_transfer_data(struct rtsx_pcr *pcr,
+		void *buf, size_t len, int use_sg, int read, int timeout)
+{
+	int err = 0;
+
+	dev_dbg(&(pcr->pci->dev), "use_sg = %d\n", use_sg);
+
+	/* don't transfer data during abort processing */
+	if (pcr->remove_pci)
+		return -EINVAL;
+
+	if (use_sg) {
+		err = rtsx_pci_transfer_sglist_adma(pcr,
+				(struct scatterlist *)buf, use_sg,
+				read, timeout);
+	} else {
+		err = rtsx_pci_transfer_buf(pcr, buf, len, read, timeout);
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_transfer_data);
+
+int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len)
+{
+	int err;
+	int i, j;
+	u16 reg;
+	u8 *ptr;
+
+	if (buf_len > 512)
+		buf_len = 512;
+
+	ptr = buf;
+	reg = PPBUF_BASE2;
+	for (i = 0; i < buf_len / 256; i++) {
+		rtsx_pci_init_cmd(pcr);
+
+		for (j = 0; j < 256; j++)
+			rtsx_pci_add_cmd(pcr, READ_REG_CMD, reg++, 0, 0);
+
+		err = rtsx_pci_send_cmd(pcr, 250);
+		if (err < 0)
+			return err;
+
+		memcpy(ptr, rtsx_pci_get_cmd_data(pcr), 256);
+		ptr += 256;
+	}
+
+	if (buf_len % 256) {
+		rtsx_pci_init_cmd(pcr);
+
+		for (j = 0; j < buf_len % 256; j++)
+			rtsx_pci_add_cmd(pcr, READ_REG_CMD, reg++, 0, 0);
+
+		err = rtsx_pci_send_cmd(pcr, 250);
+		if (err < 0)
+			return err;
+	}
+
+	memcpy(ptr, rtsx_pci_get_cmd_data(pcr), buf_len % 256);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_ppbuf);
+
+int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len)
+{
+	int err;
+	int i, j;
+	u16 reg;
+	u8 *ptr;
+
+	if (buf_len > 512)
+		buf_len = 512;
+
+	ptr = buf;
+	reg = PPBUF_BASE2;
+	for (i = 0; i < buf_len / 256; i++) {
+		rtsx_pci_init_cmd(pcr);
+
+		for (j = 0; j < 256; j++) {
+			rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+					reg++, 0xFF, *ptr);
+			ptr++;
+		}
+
+		err = rtsx_pci_send_cmd(pcr, 250);
+		if (err < 0)
+			return err;
+	}
+
+	if (buf_len % 256) {
+		rtsx_pci_init_cmd(pcr);
+
+		for (j = 0; j < buf_len % 256; j++) {
+			rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+					reg++, 0xFF, *ptr);
+			ptr++;
+		}
+
+		err = rtsx_pci_send_cmd(pcr, 250);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_ppbuf);
+
+static int rtsx_pci_set_pull_ctl(struct rtsx_pcr *pcr, const u32 *tbl)
+{
+	int err;
+
+	rtsx_pci_init_cmd(pcr);
+
+	while (*tbl & 0xFFFF0000) {
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+				(u16)(*tbl >> 16), 0xFF, (u8)(*tbl));
+		tbl++;
+	}
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+int rtsx_pci_sd_pull_ctl_enable(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_set_pull_ctl(pcr, pcr->sd_pull_ctl_enable_tbl);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_sd_pull_ctl_enable);
+
+int rtsx_pci_sd_pull_ctl_disable(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_set_pull_ctl(pcr, pcr->sd_pull_ctl_disable_tbl);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_sd_pull_ctl_disable);
+
+static void rtsx_pci_enable_bus_int(struct rtsx_pcr *pcr)
+{
+	u32 reg = 0;
+
+	reg = TRANS_OK_INT_EN | TRANS_FAIL_INT_EN;
+
+	reg |= SD_INT_EN | SD_OC_INT_EN;
+
+	/* Enable Bus Interrupt */
+	rtsx_pci_writel(pcr, RTSX_BIER, reg);
+
+	dev_dbg(&(pcr->pci->dev), "RTSX_BIER: 0x%08x\n", reg);
+}
+
+static inline u8 double_ssc_depth(u8 depth)
+{
+	return ((depth > 1) ? (depth - 1) : depth);
+}
+
+static u8 revise_ssc_depth(u8 ssc_depth, u8 div)
+{
+	if (div > CLK_DIV_1) {
+		if (ssc_depth > (div - 1))
+			ssc_depth -= (div - 1);
+		else
+			ssc_depth = SSC_DEPTH_4M;
+	}
+
+	return ssc_depth;
+}
+
+int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
+{
+	int err, clk;
+	u8 N, min_N, max_N, clk_divider;
+	u8 mcu_cnt, div, max_div;
+	u8 depth[] = {
+		[RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M,
+		[RTSX_SSC_DEPTH_2M] = SSC_DEPTH_2M,
+		[RTSX_SSC_DEPTH_1M] = SSC_DEPTH_1M,
+		[RTSX_SSC_DEPTH_500K] = SSC_DEPTH_500K,
+		[RTSX_SSC_DEPTH_250K] = SSC_DEPTH_250K,
+	};
+
+	if (initial_mode) {
+		/* We use 250k(around) here, in initial stage */
+		clk_divider = SD_CLK_DIVIDE_128;
+		card_clock = 30000000;
+	} else {
+		clk_divider = SD_CLK_DIVIDE_0;
+	}
+	err = rtsx_pci_write_register(pcr, SD_CFG1,
+			SD_CLK_DIVIDE_MASK, clk_divider);
+	if (err < 0)
+		return err;
+
+	card_clock /= 1000000;
+	dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock);
+
+	min_N = 80;
+	max_N = 208;
+	max_div = CLK_DIV_8;
+
+	clk = card_clock;
+	if (!initial_mode && double_clk)
+		clk = card_clock * 2;
+	dev_dbg(&(pcr->pci->dev), "Internal SSC clock: %dMHz\n", clk);
+
+	N = (u8)(clk - 2);
+	if ((clk <= 2) || (N > max_N))
+		return -EINVAL;
+
+	mcu_cnt = (u8)(125/clk + 3);
+	if (mcu_cnt > 15)
+		mcu_cnt = 15;
+
+	/* Make sure that the SSC clock div_n is equal or greater than min_N */
+	div = CLK_DIV_1;
+	while ((N < min_N) && (div < max_div)) {
+		N = (N + 2) * 2 - 2;
+		div++;
+	}
+	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div);
+
+	ssc_depth = depth[ssc_depth];
+	if (double_clk)
+		ssc_depth = double_ssc_depth(ssc_depth);
+
+	ssc_depth = revise_ssc_depth(ssc_depth, div);
+	dev_dbg(&(pcr->pci->dev), "ssc_depth = %d\n", ssc_depth);
+
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
+			CLK_LOW_FREQ, CLK_LOW_FREQ);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV,
+			0xFF, (div << 4) | mcu_cnt);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2,
+			SSC_DEPTH_MASK, ssc_depth);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, N);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
+	if (vpclk) {
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+				PHASE_NOT_RESET, 0);
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+				PHASE_NOT_RESET, PHASE_NOT_RESET);
+	}
+
+	err = rtsx_pci_send_cmd(pcr, 2000);
+	if (err < 0)
+		return err;
+
+	/* Wait SSC clock stable */
+	udelay(10);
+	err = rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_switch_clock);
+
+void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr)
+{
+	struct completion finish;
+
+	pcr->finish_me = &finish;
+	init_completion(&finish);
+
+	if (pcr->done)
+		complete(pcr->done);
+
+	if (!pcr->remove_pci)
+		rtsx_pci_stop_cmd(pcr);
+
+	wait_for_completion_interruptible_timeout(&finish,
+			msecs_to_jiffies(2));
+	pcr->finish_me = NULL;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_complete_unfinished_transfer);
+
+static struct platform_device *rtsx_pci_create_subdev(struct rtsx_pcr *pcr,
+		const char *name, int slot_id)
+{
+	struct platform_device *p_dev;
+	int err;
+
+	p_dev = platform_device_alloc(name, pcr->id);
+	if (p_dev == NULL) {
+		dev_dbg(&(pcr->pci->dev), "alloc platform device fail!\n");
+		return NULL;
+	}
+
+	p_dev->dev.parent = &(pcr->pci->dev);
+	platform_set_drvdata(p_dev, pcr);
+	pcr->slots[slot_id].p_dev = p_dev;
+
+	err = platform_device_add(p_dev);
+	if (err) {
+		dev_dbg(&(pcr->pci->dev), "add platform device fail!\n");
+		pcr->slots[slot_id].p_dev = NULL;
+		platform_device_put(p_dev);
+		return NULL;
+	}
+
+	return p_dev;
+}
+
+static void rtsx_pci_card_detect(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct rtsx_pcr *pcr;
+	unsigned long flags;
+	u32 irq_status;
+
+	dwork = to_delayed_work(work);
+	pcr = container_of(dwork, struct rtsx_pcr, carddet_work);
+
+	dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__);
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	irq_status = rtsx_pci_readl(pcr, RTSX_BIPR);
+	dev_dbg(&(pcr->pci->dev), "irq_status: 0x%08x\n", irq_status);
+
+	if (pcr->need_release) {
+		/* Card unplugged */
+		dev_dbg(&(pcr->pci->dev), "need_release: 0x%x\n",
+				pcr->need_release);
+
+		if (pcr->need_release & SD_EXIST) {
+			pcr->need_release &= ~SD_EXIST;
+			spin_unlock_irqrestore(&pcr->lock, flags);
+			if (pcr->slots[RTSX_SD_SLOT].p_dev) {
+				platform_device_unregister(
+					pcr->slots[RTSX_SD_SLOT].p_dev);
+				pcr->slots[RTSX_SD_SLOT].p_dev = NULL;
+			}
+			spin_lock_irqsave(&pcr->lock, flags);
+		}
+	}
+
+	if (pcr->need_reset) {
+		/* Card plugged in */
+		pcr->need_reset &= irq_status;
+		if (!pcr->need_reset)
+			goto out;
+
+		dev_dbg(&(pcr->pci->dev), "need_reset: 0x%x\n",
+				pcr->need_reset);
+
+		if (pcr->need_reset & SD_EXIST) {
+			pcr->need_reset &= ~SD_EXIST;
+			spin_unlock_irqrestore(&pcr->lock, flags);
+
+			pcr->slots[RTSX_SD_SLOT].p_dev =
+				rtsx_pci_create_subdev(pcr,
+					DRV_NAME_RTSX_PCI_SDMMC, RTSX_SD_SLOT);
+
+			spin_lock_irqsave(&pcr->lock, flags);
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&pcr->lock, flags);
+}
+
+static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
+{
+	struct rtsx_pcr *pcr = dev_id;
+	u32 int_enable, int_reg;
+
+	if (!pcr)
+		return IRQ_NONE;
+
+	spin_lock(&pcr->lock);
+
+	int_enable = rtsx_pci_readl(pcr, RTSX_BIER);
+	int_reg = rtsx_pci_readl(pcr, RTSX_BIPR);
+	/* Clear interrupt flag */
+	rtsx_pci_writel(pcr, RTSX_BIPR, int_reg);
+	if ((int_reg & int_enable) == 0) {
+		spin_unlock(&pcr->lock);
+		return IRQ_NONE;
+	}
+	if (int_reg == 0xFFFFFFFF) {
+		spin_unlock(&pcr->lock);
+		return IRQ_HANDLED;
+	}
+
+	int_reg &= (int_enable | 0x7FFFFF);
+
+	if (int_reg & SD_INT) {
+		if (int_reg & SD_EXIST) {
+			pcr->need_reset |= SD_EXIST;
+		} else {
+			pcr->need_release |= SD_EXIST;
+			pcr->need_reset &= ~SD_EXIST;
+		}
+	}
+
+	if (pcr->need_reset || pcr->need_release)
+		queue_delayed_work(workqueue, &pcr->carddet_work,
+				msecs_to_jiffies(200));
+
+	if (int_reg & (NEED_COMPLETE_INT | DELINK_INT)) {
+		if (int_reg & (TRANS_FAIL_INT | DELINK_INT)) {
+			pcr->trans_result = TRANS_RESULT_FAIL;
+			if (pcr->done)
+				complete(pcr->done);
+		} else if (int_reg & TRANS_OK_INT) {
+			pcr->trans_result = TRANS_RESULT_OK;
+			if (pcr->done)
+				complete(pcr->done);
+		} else if (int_reg & DATA_DONE_INT) {
+			pcr->trans_result = TRANS_NOT_READY;
+			if (pcr->done && (pcr->trans_state == STATE_TRANS_SG))
+				complete(pcr->done);
+		}
+	}
+
+	spin_unlock(&pcr->lock);
+	return IRQ_HANDLED;
+}
+
+static int rtsx_pci_acquire_irq(struct rtsx_pcr *pcr)
+{
+	dev_info(&(pcr->pci->dev), "%s: pcr->msi_en = %d, pci->irq = %d\n",
+			__func__, pcr->msi_en, pcr->pci->irq);
+
+	if (request_irq(pcr->pci->irq, rtsx_pci_isr,
+			pcr->msi_en ? 0 : IRQF_SHARED,
+			DRV_NAME_RTSX_PCR, pcr)) {
+		dev_err(&(pcr->pci->dev),
+			"rtsx_sdmmc: unable to grab IRQ %d, disabling device\n",
+			pcr->pci->irq);
+		return -1;
+	}
+
+	pcr->irq = pcr->pci->irq;
+	pci_intx(pcr->pci, !pcr->msi_en);
+
+	return 0;
+}
+
+static void rtsx_pci_enter_idle(unsigned long __data)
+{
+	struct rtsx_pcr *pcr = (struct rtsx_pcr *)__data;
+
+	queue_work(workqueue, &pcr->idle_work);
+}
+
+static void rtsx_pci_idle_work(struct work_struct *work)
+{
+	struct rtsx_pcr *pcr = container_of(work, struct rtsx_pcr, idle_work);
+
+	dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__);
+
+	mutex_lock(&pcr->pcr_mutex);
+
+	pcr->state = PDEV_STAT_IDLE;
+
+	pcr->ops->disable_auto_blink(pcr);
+	pcr->ops->turn_off_led(pcr);
+
+	mutex_unlock(&pcr->pcr_mutex);
+}
+
+static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+	rtsx_pci_enable_bus_int(pcr);
+
+	/* Power on SSC */
+	err = rtsx_pci_write_register(pcr, FPDCTL, SSC_POWER_DOWN, 0);
+	if (err < 0)
+		return err;
+
+	/* Wait SSC power stable */
+	udelay(200);
+
+	err = pcr->ops->optimize_phy(pcr);
+	if (err < 0)
+		return err;
+
+	rtsx_pci_init_cmd(pcr);
+
+	/* Set mcu_cnt to 7 to ensure data can be sampled properly */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV, 0x07, 0x07);
+
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, HOST_SLEEP_STATE, 0x03, 0x00);
+	/* Disable card clock */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, 0x1E, 0);
+	/* Reset ASPM state to default value */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+	/* Card driving select */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+			SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D);
+	/* Enlarge the estimation window of PERST# glitch
+	 * to reduce the chance of invalid card interrupt
+	 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PERST_GLITCH_WIDTH, 0xFF, 0x80);
+	/* Update RC oscillator to 400k
+	 * bit[0] F_HIGH: for RC oscillator, Rst_value is 1'b1
+	 *                1: 2M  0: 400k
+	 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, RCCTL, 0x01, 0x00);
+	/* Set interrupt write clear
+	 * bit 1: U_elbi_if_rd_clr_en
+	 *	1: Enable ELBI interrupt[31:22] & [7:0] flag read clear
+	 *	0: ELBI interrupt flag[31:22] & [7:0] only can be write clear
+	 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, NFTS_TX_CTRL, 0x02, 0);
+	/* Force CLKREQ# PIN to drive 0 to request clock */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	err = pcr->ops->extra_init_hw(pcr);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+/* SD Pull Control Enable:
+ *     SD_DAT[3:0] ==> pull up
+ *     SD_CD       ==> pull up
+ *     SD_WP       ==> pull up
+ *     SD_CMD      ==> pull up
+ *     SD_CLK      ==> pull down
+ */
+static const u32 rts5209_sd_pull_ctl_enable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL1, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+	0,
+};
+
+static const u32 rts5229_sd_pull_ctl_enable_tbl1[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+	0,
+};
+
+/* For RTS5229 version C */
+static const u32 rts5229_sd_pull_ctl_enable_tbl2[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD9),
+	0,
+};
+
+/* SD Pull Control Disable:
+ *     SD_DAT[3:0] ==> pull down
+ *     SD_CD       ==> pull up
+ *     SD_WP       ==> pull down
+ *     SD_CMD      ==> pull down
+ *     SD_CLK      ==> pull down
+ */
+static const u32 rts5209_sd_pull_ctl_disable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL1, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+	0,
+};
+
+static const u32 rts5229_sd_pull_ctl_disable_tbl1[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+	0,
+};
+
+/* For RTS5229 version C */
+static const u32 rts5229_sd_pull_ctl_disable_tbl2[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE5),
+	0,
+};
+
+static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
+{
+	int err;
+	u32 irq_status;
+
+	spin_lock_init(&pcr->lock);
+	mutex_init(&pcr->pcr_mutex);
+
+	switch (PCI_PID(pcr)) {
+	default:
+	case 0x5209:
+		pcr->extra_caps = EXTRA_CAPS_SD_SDR50 |
+			EXTRA_CAPS_SD_SDR104 | EXTRA_CAPS_MMC_8BIT;
+
+		pcr->rval.ldo_pwr_on = 0x00;
+		pcr->rval.ldo_pwr_off = 0x06;
+		pcr->rval.ldo_pwr_suspend = 0x04;
+
+		pcr->num_slots = 1;
+		pcr->ops = &rts5209_pcr_ops;
+
+		pcr->ic_version = pcr->ops->get_ic_version(pcr);
+		pcr->sd_pull_ctl_enable_tbl = rts5209_sd_pull_ctl_enable_tbl;
+		pcr->sd_pull_ctl_disable_tbl =	rts5209_sd_pull_ctl_disable_tbl;
+
+		break;
+
+	case 0x5229:
+		pcr->extra_caps = EXTRA_CAPS_SD_SDR50 |
+			EXTRA_CAPS_SD_SDR104;
+
+		pcr->rval.ldo_pwr_on = 0x06;
+		pcr->rval.ldo_pwr_off = 0x00;
+		pcr->rval.ldo_pwr_suspend = 0x02;
+
+		pcr->num_slots = 1;
+		pcr->ops = &rts5229_pcr_ops;
+
+		pcr->ic_version = pcr->ops->get_ic_version(pcr);
+		if (pcr->ic_version == IC_VER_C) {
+			pcr->sd_pull_ctl_enable_tbl =
+				rts5229_sd_pull_ctl_enable_tbl2;
+			pcr->sd_pull_ctl_disable_tbl =
+				rts5229_sd_pull_ctl_disable_tbl2;
+		} else {
+			pcr->sd_pull_ctl_enable_tbl =
+				rts5229_sd_pull_ctl_enable_tbl1;
+			pcr->sd_pull_ctl_disable_tbl =
+				rts5229_sd_pull_ctl_disable_tbl1;
+		}
+
+		break;
+	}
+
+	dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",
+			PCI_PID(pcr), pcr->ic_version);
+
+	pcr->slots = kzalloc(sizeof(struct rtsx_slot) * pcr->num_slots,
+			GFP_KERNEL);
+	if (!pcr->slots)
+		return -ENOMEM;
+
+	pcr->state = PDEV_STAT_IDLE;
+	err = rtsx_pci_init_hw(pcr);
+	if (err < 0) {
+		kfree(pcr->slots);
+		return err;
+	}
+
+	irq_status = rtsx_pci_readl(pcr, RTSX_BIPR);
+	/* Clear interrupt flag */
+	rtsx_pci_writel(pcr, RTSX_BIPR, irq_status);
+	if (irq_status & SD_EXIST)
+		pcr->need_reset |= SD_EXIST;
+
+	if (pcr->need_reset)
+		queue_delayed_work(workqueue, &pcr->carddet_work, 0);
+
+	return 0;
+}
+
+static int __devinit rtsx_pci_probe(struct pci_dev *pcidev,
+				    const struct pci_device_id *id)
+{
+	struct rtsx_pcr *pcr;
+	u32 base, len;
+	int ret;
+
+	dev_dbg(&(pcidev->dev),
+		": Realtek PCI-E Card Reader found at %s [%04x:%04x] (rev %x)\n",
+		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
+		(int)pcidev->revision);
+
+	ret = pci_enable_device(pcidev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pcidev, DRV_NAME_RTSX_PCR);
+	if (ret)
+		goto disable;
+
+	pcr = kzalloc(sizeof(*pcr), GFP_KERNEL);
+	if (!pcr) {
+		ret = -ENOMEM;
+		goto release_pci;
+	}
+
+	if (!idr_pre_get(&rtsx_pci_idr, GFP_KERNEL)) {
+		ret = -ENOMEM;
+		goto free_pcr;
+	}
+
+	spin_lock(&rtsx_pci_lock);
+	ret = idr_get_new(&rtsx_pci_idr, pcr, &pcr->id);
+	spin_unlock(&rtsx_pci_lock);
+	if (ret)
+		goto free_pcr;
+
+	pcr->pci = pcidev;
+	dev_set_drvdata(&pcidev->dev, pcr);
+
+	len = pci_resource_len(pcidev, 0);
+	base = pci_resource_start(pcidev, 0);
+	pcr->remap_addr = ioremap_nocache(base, len);
+	if (!pcr->remap_addr) {
+		ret = -ENOMEM;
+		goto free_host;
+	}
+
+	pcr->rtsx_resv_buf = dma_alloc_coherent(&(pcidev->dev),
+			RTSX_RESV_BUF_LEN, &(pcr->rtsx_resv_buf_addr),
+			GFP_KERNEL);
+	if (pcr->rtsx_resv_buf == NULL) {
+		ret = -ENXIO;
+		goto unmap;
+	}
+	pcr->host_cmds_ptr = pcr->rtsx_resv_buf;
+	pcr->host_cmds_addr = pcr->rtsx_resv_buf_addr;
+	pcr->host_sg_tbl_ptr = pcr->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
+	pcr->host_sg_tbl_addr = pcr->rtsx_resv_buf_addr + HOST_CMDS_BUF_LEN;
+
+	pcr->need_reset = 0;
+	pcr->need_release = 0;
+	INIT_DELAYED_WORK(&pcr->carddet_work, rtsx_pci_card_detect);
+	INIT_WORK(&pcr->idle_work, rtsx_pci_idle_work);
+	init_timer(&pcr->idle_timer);
+
+	pcr->msi_en = msi_en;
+	if (pcr->msi_en) {
+		ret = pci_enable_msi(pcidev);
+		if (ret < 0)
+			pcr->msi_en = false;
+	}
+
+	ret = rtsx_pci_acquire_irq(pcr);
+	if (ret < 0)
+		goto free_dma;
+
+	pci_set_master(pcidev);
+	synchronize_irq(pcr->irq);
+
+	ret = rtsx_pci_init_chip(pcr);
+	if (ret < 0)
+		goto disable_irq;
+
+	pcr->idle_timer.expires = jiffies + msecs_to_jiffies(200);
+	pcr->idle_timer.data = (unsigned long)pcr;
+	pcr->idle_timer.function = rtsx_pci_enter_idle;
+	add_timer(&pcr->idle_timer);
+
+	return 0;
+
+disable_irq:
+	free_irq(pcr->irq, (void *)pcr);
+free_dma:
+	dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
+			pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
+unmap:
+	iounmap(pcr->remap_addr);
+free_host:
+	dev_set_drvdata(&pcidev->dev, NULL);
+free_pcr:
+	kfree(pcr);
+release_pci:
+	pci_release_regions(pcidev);
+disable:
+	pci_disable_device(pcidev);
+
+	return ret;
+}
+
+static void __devexit rtsx_pci_remove(struct pci_dev *pcidev)
+{
+	struct rtsx_pcr *pcr = pci_get_drvdata(pcidev);
+	int i;
+
+	pcr->remove_pci = true;
+
+	flush_workqueue(workqueue);
+	cancel_delayed_work(&pcr->carddet_work);
+	del_timer_sync(&pcr->idle_timer);
+
+	for (i = 0; i < pcr->num_slots; i++) {
+		if (pcr->slots[i].p_dev) {
+			platform_device_unregister(pcr->slots[i].p_dev);
+			pcr->slots[i].p_dev = NULL;
+		}
+	}
+
+	dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
+			pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
+	free_irq(pcr->irq, (void *)pcr);
+	if (pcr->msi_en)
+		pci_disable_msi(pcr->pci);
+	iounmap(pcr->remap_addr);
+
+	dev_set_drvdata(&pcidev->dev, NULL);
+	pci_release_regions(pcidev);
+	pci_disable_device(pcidev);
+
+	spin_lock(&rtsx_pci_lock);
+	idr_remove(&rtsx_pci_idr, pcr->id);
+	spin_unlock(&rtsx_pci_lock);
+
+	kfree(pcr->slots);
+	kfree(pcr);
+
+	dev_dbg(&(pcidev->dev),
+		": Realtek PCI-E Card Reader at %s [%04x:%04x] has been removed\n",
+		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
+}
+
+#ifdef CONFIG_PM
+
+static int rtsx_pci_suspend(struct pci_dev *pcidev, pm_message_t state)
+{
+	struct rtsx_pcr *pcr;
+	int ret = 0;
+
+	pcr = pci_get_drvdata(pcidev);
+
+	pci_save_state(pcidev);
+	pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
+	pci_disable_device(pcidev);
+	pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+
+	return ret;
+}
+
+static int rtsx_pci_resume(struct pci_dev *pcidev)
+{
+	struct rtsx_pcr *pcr;
+	int ret = 0;
+
+	pcr = pci_get_drvdata(pcidev);
+
+	pci_set_power_state(pcidev, PCI_D0);
+	pci_restore_state(pcidev);
+	ret = pci_enable_device(pcidev);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+#else /* CONFIG_PM */
+
+#define rtsx_pci_suspend NULL
+#define rtsx_pci_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver rtsx_pci_driver = {
+	.name = DRV_NAME_RTSX_PCR,
+	.id_table = rtsx_pci_ids,
+	.probe = rtsx_pci_probe,
+	.remove = __devexit_p(rtsx_pci_remove),
+	.suspend = rtsx_pci_suspend,
+	.resume = rtsx_pci_resume,
+};
+
+static int __init rtsx_pci_drv_init(void)
+{
+	workqueue = create_freezable_workqueue("rtsx_pci_wq");
+	if (!workqueue)
+		return -ENOMEM;
+
+	return pci_register_driver(&rtsx_pci_driver);
+}
+
+static void __exit rtsx_pci_drv_exit(void)
+{
+	pci_unregister_driver(&rtsx_pci_driver);
+	destroy_workqueue(workqueue);
+}
+
+module_init(rtsx_pci_drv_init);
+module_exit(rtsx_pci_drv_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Realtek Corp.");
+MODULE_DESCRIPTION("Realtek PCI-E Card Reader Adapter Driver");
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
new file mode 100644
index 0000000..8fbc471
--- /dev/null
+++ b/drivers/mfd/rtsx_pcr.h
@@ -0,0 +1,31 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#ifndef __RTSX_PCR_H
+#define __RTSX_PCR_H
+
+#include <linux/mfd/rtsx_pci.h>
+
+extern const struct pcr_ops rts5209_pcr_ops;
+extern const struct pcr_ops rts5229_pcr_ops;
+
+#endif
diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h
new file mode 100644
index 0000000..b200efc
--- /dev/null
+++ b/include/linux/mfd/rtsx_common.h
@@ -0,0 +1,47 @@ 
+/* Driver for Realtek driver-based card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#ifndef __RTSX_COMMON_H
+#define __RTSX_COMMON_H
+
+#define DRV_NAME_RTSX_PCR		"rtsx_pcr"
+#define DRV_NAME_RTSX_PCI_SDMMC		"rtsx_pci_sdmmc"
+
+#define RTSX_REG_PAIR(addr, val)	(((u32)(addr) << 16) | (u8)(val))
+
+#define RTSX_SSC_DEPTH_4M		0x01
+#define RTSX_SSC_DEPTH_2M		0x02
+#define RTSX_SSC_DEPTH_1M		0x03
+#define RTSX_SSC_DEPTH_500K		0x04
+#define RTSX_SSC_DEPTH_250K		0x05
+
+#define RTSX_SD_SLOT			0
+#define RTSX_MS_SLOT			1
+#define RTSX_XD_SLOT			2
+
+struct platform_device;
+
+struct rtsx_slot {
+	struct platform_device		*p_dev;
+};
+
+#endif
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
new file mode 100644
index 0000000..b91ca83
--- /dev/null
+++ b/include/linux/mfd/rtsx_pci.h
@@ -0,0 +1,692 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#ifndef __RTSX_PCI_H
+#define __RTSX_PCI_H
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+
+#include "rtsx_common.h"
+
+#define MAX_RW_REG_CNT			1024
+
+#define RTSX_MAX_BLOCK_COUNT		65536
+#define RTSX_MAX_BLOCK_LENGTH		2048
+
+/* PCI Operation Register Address */
+#define RTSX_HCBAR			0x00
+#define RTSX_HCBCTLR			0x04
+#define RTSX_HDBAR			0x08
+#define RTSX_HDBCTLR			0x0C
+#define RTSX_HAIMR			0x10
+#define RTSX_BIPR			0x14
+#define RTSX_BIER			0x18
+
+/* Host command buffer control register */
+#define STOP_CMD			(0x01 << 28)
+
+/* Host data buffer control register */
+#define SDMA_MODE			0x00
+#define ADMA_MODE			(0x02 << 26)
+#define STOP_DMA			(0x01 << 28)
+#define TRIG_DMA			(0x01 << 31)
+
+/* Bus interrupt pending register */
+#define CMD_DONE_INT			(1 << 31)
+#define DATA_DONE_INT			(1 << 30)
+#define TRANS_OK_INT			(1 << 29)
+#define TRANS_FAIL_INT			(1 << 28)
+#define XD_INT				(1 << 27)
+#define MS_INT				(1 << 26)
+#define SD_INT				(1 << 25)
+#define GPIO0_INT			(1 << 24)
+#define OC_INT				(1 << 23)
+#define SD_WRITE_PROTECT		(1 << 19)
+#define XD_EXIST			(1 << 18)
+#define MS_EXIST			(1 << 17)
+#define SD_EXIST			(1 << 16)
+#define DELINK_INT			GPIO0_INT
+#define MS_OC_INT			(1 << 23)
+#define SD_OC_INT			(1 << 22)
+
+#define CARD_INT		(XD_INT | MS_INT | SD_INT)
+#define NEED_COMPLETE_INT	(DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)
+#define RTSX_INT		(CMD_DONE_INT | NEED_COMPLETE_INT | \
+					CARD_INT | GPIO0_INT | OC_INT)
+
+#define CARD_EXIST		(XD_EXIST | MS_EXIST | SD_EXIST)
+
+/* Bus interrupt enable register */
+#define CMD_DONE_INT_EN		(1 << 31)
+#define DATA_DONE_INT_EN	(1 << 30)
+#define TRANS_OK_INT_EN		(1 << 29)
+#define TRANS_FAIL_INT_EN	(1 << 28)
+#define XD_INT_EN		(1 << 27)
+#define MS_INT_EN		(1 << 26)
+#define SD_INT_EN		(1 << 25)
+#define GPIO0_INT_EN		(1 << 24)
+#define OC_INT_EN		(1 << 23)
+#define DELINK_INT_EN		GPIO0_INT_EN
+#define MS_OC_INT_EN		(1 << 23)
+#define SD_OC_INT_EN		(1 << 22)
+
+#define READ_REG_CMD		0
+#define WRITE_REG_CMD		1
+#define CHECK_REG_CMD		2
+
+/*
+ * macros for easy use
+ */
+#define rtsx_pci_writel(pcr, reg, value) \
+	iowrite32(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readl(pcr, reg) \
+	ioread32((pcr)->remap_addr + reg)
+#define rtsx_pci_writew(pcr, reg, value) \
+	iowrite16(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readw(pcr, reg) \
+	ioread16((pcr)->remap_addr + reg)
+#define rtsx_pci_writeb(pcr, reg, value) \
+	iowrite8(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readb(pcr, reg) \
+	ioread8((pcr)->remap_addr + reg)
+
+#define rtsx_pci_read_config_byte(pcr, where, val) \
+	pci_read_config_byte((pcr)->pci, where, val)
+
+#define rtsx_pci_write_config_byte(pcr, where, val) \
+	pci_write_config_byte((pcr)->pci, where, val)
+
+#define rtsx_pci_read_config_dword(pcr, where, val) \
+	pci_read_config_dword((pcr)->pci, where, val)
+
+#define rtsx_pci_write_config_dword(pcr, where, val) \
+	pci_write_config_dword((pcr)->pci, where, val)
+
+#define STATE_TRANS_NONE	0
+#define STATE_TRANS_CMD		1
+#define STATE_TRANS_BUF		2
+#define STATE_TRANS_SG		3
+
+#define TRANS_NOT_READY		0
+#define TRANS_RESULT_OK		1
+#define TRANS_RESULT_FAIL	2
+#define TRANS_NO_DEVICE		3
+
+#define RTSX_RESV_BUF_LEN	4096
+#define HOST_CMDS_BUF_LEN	1024
+#define HOST_SG_TBL_BUF_LEN	(RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
+
+#define HOST_TO_DEVICE		0
+#define DEVICE_TO_HOST		1
+
+#define MAX_PHASE		31
+#define RX_TUNING_CNT		3
+
+/* SG descriptor */
+#define SG_INT			0x04
+#define SG_END			0x02
+#define SG_VALID		0x01
+
+#define SG_NO_OP		0x00
+#define SG_TRANS_DATA		(0x02 << 4)
+#define SG_LINK_DESC		(0x03 << 4)
+
+/* SD bank voltage */
+#define SD_IO_3V3		0
+#define SD_IO_1V8		1
+
+
+/* Card Clock Enable Register */
+#define SD_CLK_EN			0x04
+
+/* Card Select Register */
+#define SD_MOD_SEL			2
+
+/* Card Output Enable Register */
+#define SD_OUTPUT_EN			0x04
+
+/* CARD_SHARE_MODE */
+#define CARD_SHARE_MASK			0x0F
+#define CARD_SHARE_MULTI_LUN		0x00
+#define	CARD_SHARE_NORMAL		0x00
+#define	CARD_SHARE_48_SD		0x04
+/* CARD_SHARE_MODE for barossa */
+#define CARD_SHARE_BAROSSA_SD		0x01
+
+/* SD30_DRIVE_SEL */
+#define DRIVER_TYPE_A			0x05
+#define DRIVER_TYPE_B			0x03
+#define DRIVER_TYPE_C			0x02
+#define DRIVER_TYPE_D			0x01
+
+/* FPDCTL */
+#define SSC_POWER_DOWN			0x01
+#define SD_OC_POWER_DOWN		0x02
+#define ALL_POWER_DOWN			0x07
+#define OC_POWER_DOWN			0x06
+
+/* CLK_CTL */
+#define CHANGE_CLK			0x01
+
+/* SD_STAT1 */
+#define	SD_CRC7_ERR			0x80
+#define	SD_CRC16_ERR			0x40
+#define	SD_CRC_WRITE_ERR		0x20
+#define	SD_CRC_WRITE_ERR_MASK		0x1C
+#define	GET_CRC_TIME_OUT		0x02
+#define	SD_TUNING_COMPARE_ERR		0x01
+
+/* SD_STAT2 */
+#define	SD_RSP_80CLK_TIMEOUT		0x01
+
+/* SD_BUS_STAT */
+#define	SD_CLK_TOGGLE_EN		0x80
+#define	SD_CLK_FORCE_STOP	        0x40
+#define	SD_DAT3_STATUS		        0x10
+#define	SD_DAT2_STATUS		        0x08
+#define	SD_DAT1_STATUS		        0x04
+#define	SD_DAT0_STATUS		        0x02
+#define	SD_CMD_STATUS			0x01
+
+/* SD_PAD_CTL */
+#define	SD_IO_USING_1V8		        0x80
+#define	SD_IO_USING_3V3		        0x7F
+#define	TYPE_A_DRIVING		        0x00
+#define	TYPE_B_DRIVING			0x01
+#define	TYPE_C_DRIVING			0x02
+#define	TYPE_D_DRIVING		        0x03
+
+/* SD_SAMPLE_POINT_CTL */
+#define	DDR_FIX_RX_DAT			0x00
+#define	DDR_VAR_RX_DAT			0x80
+#define	DDR_FIX_RX_DAT_EDGE		0x00
+#define	DDR_FIX_RX_DAT_14_DELAY		0x40
+#define	DDR_FIX_RX_CMD			0x00
+#define	DDR_VAR_RX_CMD			0x20
+#define	DDR_FIX_RX_CMD_POS_EDGE		0x00
+#define	DDR_FIX_RX_CMD_14_DELAY		0x10
+#define	SD20_RX_POS_EDGE		0x00
+#define	SD20_RX_14_DELAY		0x08
+#define SD20_RX_SEL_MASK		0x08
+
+/* SD_PUSH_POINT_CTL */
+#define	DDR_FIX_TX_CMD_DAT		0x00
+#define	DDR_VAR_TX_CMD_DAT		0x80
+#define	DDR_FIX_TX_DAT_14_TSU		0x00
+#define	DDR_FIX_TX_DAT_12_TSU		0x40
+#define	DDR_FIX_TX_CMD_NEG_EDGE		0x00
+#define	DDR_FIX_TX_CMD_14_AHEAD		0x20
+#define	SD20_TX_NEG_EDGE		0x00
+#define	SD20_TX_14_AHEAD		0x10
+#define SD20_TX_SEL_MASK		0x10
+#define	DDR_VAR_SDCLK_POL_SWAP		0x01
+
+/* SD_TRANSFER */
+#define	SD_TRANSFER_START		0x80
+#define	SD_TRANSFER_END			0x40
+#define SD_STAT_IDLE			0x20
+#define	SD_TRANSFER_ERR			0x10
+/* SD Transfer Mode definition */
+#define	SD_TM_NORMAL_WRITE		0x00
+#define	SD_TM_AUTO_WRITE_3		0x01
+#define	SD_TM_AUTO_WRITE_4		0x02
+#define	SD_TM_AUTO_READ_3		0x05
+#define	SD_TM_AUTO_READ_4		0x06
+#define	SD_TM_CMD_RSP			0x08
+#define	SD_TM_AUTO_WRITE_1		0x09
+#define	SD_TM_AUTO_WRITE_2		0x0A
+#define	SD_TM_NORMAL_READ		0x0C
+#define	SD_TM_AUTO_READ_1		0x0D
+#define	SD_TM_AUTO_READ_2		0x0E
+#define	SD_TM_AUTO_TUNING		0x0F
+
+/* SD_VPTX_CTL / SD_VPRX_CTL */
+#define PHASE_CHANGE			0x80
+#define PHASE_NOT_RESET			0x40
+
+/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */
+#define DCMPS_CHANGE			0x80
+#define DCMPS_CHANGE_DONE		0x40
+#define DCMPS_ERROR			0x20
+#define DCMPS_CURRENT_PHASE		0x1F
+
+/* SD Configure 1 Register */
+#define SD_CLK_DIVIDE_0			0x00
+#define	SD_CLK_DIVIDE_256		0xC0
+#define	SD_CLK_DIVIDE_128		0x80
+#define	SD_BUS_WIDTH_1BIT		0x00
+#define	SD_BUS_WIDTH_4BIT		0x01
+#define	SD_BUS_WIDTH_8BIT		0x02
+#define	SD_ASYNC_FIFO_NOT_RST		0x10
+#define	SD_20_MODE			0x00
+#define	SD_DDR_MODE			0x04
+#define	SD_30_MODE			0x08
+
+#define SD_CLK_DIVIDE_MASK		0xC0
+
+/* SD_CMD_STATE */
+#define SD_CMD_IDLE			0x80
+
+/* SD_DATA_STATE */
+#define SD_DATA_IDLE			0x80
+
+/* DCM_DRP_CTL */
+#define DCM_RESET			0x08
+#define DCM_LOCKED			0x04
+#define DCM_208M			0x00
+#define DCM_TX			        0x01
+#define DCM_RX			        0x02
+
+/* DCM_DRP_TRIG */
+#define DRP_START			0x80
+#define DRP_DONE			0x40
+
+/* DCM_DRP_CFG */
+#define DRP_WRITE			0x80
+#define DRP_READ			0x00
+#define DCM_WRITE_ADDRESS_50		0x50
+#define DCM_WRITE_ADDRESS_51		0x51
+#define DCM_READ_ADDRESS_00		0x00
+#define DCM_READ_ADDRESS_51		0x51
+
+/* IRQSTAT0 */
+#define DMA_DONE_INT			0x80
+#define SUSPEND_INT			0x40
+#define LINK_RDY_INT			0x20
+#define LINK_DOWN_INT			0x10
+
+/* DMACTL */
+#define DMA_RST				0x80
+#define DMA_BUSY			0x04
+#define DMA_DIR_TO_CARD			0x00
+#define DMA_DIR_FROM_CARD		0x02
+#define DMA_EN				0x01
+#define DMA_128				(0 << 4)
+#define DMA_256				(1 << 4)
+#define DMA_512				(2 << 4)
+#define DMA_1024			(3 << 4)
+#define DMA_PACK_SIZE_MASK		0x30
+
+/* SSC_CTL1 */
+#define SSC_RSTB			0x80
+#define SSC_8X_EN			0x40
+#define SSC_FIX_FRAC			0x20
+#define SSC_SEL_1M			0x00
+#define SSC_SEL_2M			0x08
+#define SSC_SEL_4M			0x10
+#define SSC_SEL_8M			0x18
+
+/* SSC_CTL2 */
+#define SSC_DEPTH_MASK			0x07
+#define SSC_DEPTH_DISALBE		0x00
+#define SSC_DEPTH_4M			0x01
+#define SSC_DEPTH_2M			0x02
+#define SSC_DEPTH_1M			0x03
+#define SSC_DEPTH_500K			0x04
+#define SSC_DEPTH_250K			0x05
+
+/* System Clock Control Register */
+#define CLK_LOW_FREQ			0x01
+
+/* System Clock Divider Register */
+#define CLK_DIV_1			0x01
+#define CLK_DIV_2			0x02
+#define CLK_DIV_4			0x03
+#define CLK_DIV_8			0x04
+
+/* SD Configure 2 Register */
+#define	SD_CALCULATE_CRC7		0x00
+#define	SD_NO_CALCULATE_CRC7		0x80
+#define	SD_CHECK_CRC16			0x00
+#define	SD_NO_CHECK_CRC16		0x40
+#define SD_NO_CHECK_WAIT_CRC_TO		0x20
+#define	SD_WAIT_BUSY_END		0x08
+#define	SD_NO_WAIT_BUSY_END		0x00
+#define	SD_CHECK_CRC7			0x00
+#define	SD_NO_CHECK_CRC7		0x04
+#define	SD_RSP_LEN_0			0x00
+#define	SD_RSP_LEN_6			0x01
+#define	SD_RSP_LEN_17			0x02
+/* SD/MMC Response Type Definition */
+#define	SD_RSP_TYPE_R0			0x04
+#define	SD_RSP_TYPE_R1			0x01
+#define	SD_RSP_TYPE_R1b			0x09
+#define	SD_RSP_TYPE_R2			0x02
+#define	SD_RSP_TYPE_R3			0x05
+#define	SD_RSP_TYPE_R4			0x05
+#define	SD_RSP_TYPE_R5			0x01
+#define	SD_RSP_TYPE_R6			0x01
+#define	SD_RSP_TYPE_R7			0x01
+
+/* SD_CONFIURE3 */
+#define	SD_RSP_80CLK_TIMEOUT_EN		0x01
+
+/* Card Transfer Reset Register */
+#define SPI_STOP			0x01
+#define XD_STOP				0x02
+#define SD_STOP				0x04
+#define MS_STOP				0x08
+#define SPI_CLR_ERR			0x10
+#define XD_CLR_ERR			0x20
+#define SD_CLR_ERR			0x40
+#define MS_CLR_ERR			0x80
+
+/* Card Data Source Register */
+#define PINGPONG_BUFFER			0x01
+#define RING_BUFFER			0x00
+
+/* Card Power Control Register */
+#define PMOS_STRG_MASK			0x10
+#define PMOS_STRG_800mA			0x10
+#define PMOS_STRG_400mA			0x00
+#define SD_POWER_OFF			0x03
+#define SD_PARTIAL_POWER_ON		0x01
+#define SD_POWER_ON			0x00
+#define SD_POWER_MASK			0x03
+
+/* PWR_GATE_CTRL */
+#define PWR_GATE_EN			0x01
+#define LDO3318_PWR_MASK		0x06
+#define LDO_ON				0x00
+#define LDO_SUSPEND			0x04
+#define LDO_OFF				0x06
+
+/* CARD_CLK_SOURCE */
+#define CRC_FIX_CLK			(0x00 << 0)
+#define CRC_VAR_CLK0			(0x01 << 0)
+#define CRC_VAR_CLK1			(0x02 << 0)
+#define SD30_FIX_CLK			(0x00 << 2)
+#define SD30_VAR_CLK0			(0x01 << 2)
+#define SD30_VAR_CLK1			(0x02 << 2)
+#define SAMPLE_FIX_CLK			(0x00 << 4)
+#define SAMPLE_VAR_CLK0			(0x01 << 4)
+#define SAMPLE_VAR_CLK1			(0x02 << 4)
+
+#define SD_CFG1				0xFDA0
+#define SD_CFG2				0xFDA1
+#define SD_CFG3				0xFDA2
+#define SD_STAT1			0xFDA3
+#define SD_STAT2			0xFDA4
+#define SD_BUS_STAT			0xFDA5
+#define SD_PAD_CTL			0xFDA6
+#define SD_SAMPLE_POINT_CTL		0xFDA7
+#define SD_PUSH_POINT_CTL		0xFDA8
+#define SD_CMD0				0xFDA9
+#define SD_CMD1				0xFDAA
+#define SD_CMD2				0xFDAB
+#define SD_CMD3				0xFDAC
+#define SD_CMD4				0xFDAD
+#define SD_CMD5				0xFDAE
+#define SD_BYTE_CNT_L			0xFDAF
+#define SD_BYTE_CNT_H			0xFDB0
+#define SD_BLOCK_CNT_L			0xFDB1
+#define SD_BLOCK_CNT_H			0xFDB2
+#define SD_TRANSFER			0xFDB3
+#define SD_CMD_STATE			0xFDB5
+#define SD_DATA_STATE			0xFDB6
+
+#define SRCTL				0xFC13
+
+#define	DCM_DRP_CTL			0xFC23
+#define	DCM_DRP_TRIG			0xFC24
+#define	DCM_DRP_CFG			0xFC25
+#define	DCM_DRP_WR_DATA_L		0xFC26
+#define	DCM_DRP_WR_DATA_H		0xFC27
+#define	DCM_DRP_RD_DATA_L		0xFC28
+#define	DCM_DRP_RD_DATA_H		0xFC29
+#define SD_VPCLK0_CTL			0xFC2A
+#define SD_VPCLK1_CTL			0xFC2B
+#define SD_DCMPS0_CTL			0xFC2C
+#define SD_DCMPS1_CTL			0xFC2D
+#define SD_VPTX_CTL			SD_VPCLK0_CTL
+#define SD_VPRX_CTL			SD_VPCLK1_CTL
+#define SD_DCMPS_TX_CTL			SD_DCMPS0_CTL
+#define SD_DCMPS_RX_CTL			SD_DCMPS1_CTL
+#define CARD_CLK_SOURCE			0xFC2E
+
+#define CARD_PWR_CTL			0xFD50
+#define CARD_CLK_SWITCH			0xFD51
+#define CARD_SHARE_MODE			0xFD52
+#define CARD_DRIVE_SEL			0xFD53
+#define CARD_STOP			0xFD54
+#define CARD_OE				0xFD55
+#define CARD_AUTO_BLINK			0xFD56
+#define CARD_GPIO_DIR			0xFD57
+#define CARD_GPIO			0xFD58
+
+#define CARD_DATA_SOURCE		0xFD5B
+#define CARD_SELECT			0xFD5C
+#define SD30_DRIVE_SEL			0xFD5E
+
+#define CARD_CLK_EN			0xFD69
+
+#define SDIO_CTRL			0xFD6B
+
+#define FPDCTL				0xFC00
+#define PDINFO				0xFC01
+
+#define CLK_CTL				0xFC02
+#define CLK_DIV				0xFC03
+#define CLK_SEL				0xFC04
+
+#define SSC_DIV_N_0			0xFC0F
+#define SSC_DIV_N_1			0xFC10
+#define SSC_CTL1			0xFC11
+#define SSC_CTL2			0xFC12
+
+#define RCCTL				0xFC14
+
+#define FPGA_PULL_CTL			0xFC1D
+
+#define CARD_PULL_CTL1			0xFD60
+#define CARD_PULL_CTL2			0xFD61
+#define CARD_PULL_CTL3			0xFD62
+#define CARD_PULL_CTL4			0xFD63
+#define CARD_PULL_CTL5			0xFD64
+#define CARD_PULL_CTL6			0xFD65
+
+/* PCI Express Related Registers */
+#define IRQEN0				0xFE20
+#define IRQSTAT0			0xFE21
+#define IRQEN1				0xFE22
+#define IRQSTAT1			0xFE23
+#define TLPRIEN				0xFE24
+#define TLPRISTAT			0xFE25
+#define TLPTIEN				0xFE26
+#define TLPTISTAT			0xFE27
+#define DMATC0				0xFE28
+#define DMATC1				0xFE29
+#define DMATC2				0xFE2A
+#define DMATC3				0xFE2B
+#define DMACTL				0xFE2C
+#define BCTL				0xFE2D
+#define RBBC0				0xFE2E
+#define RBBC1				0xFE2F
+#define RBDAT				0xFE30
+#define RBCTL				0xFE34
+#define CFGADDR0			0xFE35
+#define CFGADDR1			0xFE36
+#define CFGDATA0			0xFE37
+#define CFGDATA1			0xFE38
+#define CFGDATA2			0xFE39
+#define CFGDATA3			0xFE3A
+#define CFGRWCTL			0xFE3B
+#define PHYRWCTL			0xFE3C
+#define PHYDATA0			0xFE3D
+#define PHYDATA1			0xFE3E
+#define PHYADDR				0xFE3F
+#define MSGRXDATA0			0xFE40
+#define MSGRXDATA1			0xFE41
+#define MSGRXDATA2			0xFE42
+#define MSGRXDATA3			0xFE43
+#define MSGTXDATA0			0xFE44
+#define MSGTXDATA1			0xFE45
+#define MSGTXDATA2			0xFE46
+#define MSGTXDATA3			0xFE47
+#define MSGTXCTL			0xFE48
+#define PETXCFG				0xFE49
+
+#define CDRESUMECTL			0xFE52
+#define WAKE_SEL_CTL			0xFE54
+#define PME_FORCE_CTL			0xFE56
+#define ASPM_FORCE_CTL			0xFE57
+#define PM_CLK_FORCE_CTL		0xFE58
+#define PERST_GLITCH_WIDTH		0xFE5C
+#define CHANGE_LINK_STATE		0xFE5B
+#define RESET_LOAD_REG			0xFE5E
+#define EFUSE_CONTENT			0xFE5F
+#define HOST_SLEEP_STATE		0xFE60
+#define MAIN_PWR_OFF_CTL		0xFE70 /* RTS5208 */
+#define SDIO_CFG			0xFE70 /* RTS5209 */
+
+#define NFTS_TX_CTRL			0xFE72
+
+#define PWR_GATE_CTRL			0xFE75
+#define PWD_SUSPEND_EN			0xFE76
+
+/* Memory mapping */
+#define SRAM_BASE			0xE600
+#define RBUF_BASE			0xF400
+#define PPBUF_BASE1			0xF800
+#define PPBUF_BASE2			0xFA00
+#define IMAGE_FLAG_ADDR0		0xCE80
+#define IMAGE_FLAG_ADDR1		0xCE81
+
+#define rtsx_pci_init_cmd(pcr)		((pcr)->ci = 0)
+
+struct reg_val {
+	/* Enable signal for regulator3318 */
+	u8 ldo_pwr_on;
+	u8 ldo_pwr_off;
+	u8 ldo_pwr_suspend;
+};
+
+struct rtsx_pcr;
+
+struct pcr_ops {
+	u8		(*get_ic_version)(struct rtsx_pcr *pcr);
+	int		(*extra_init_hw)(struct rtsx_pcr *pcr);
+	int		(*optimize_phy)(struct rtsx_pcr *pcr);
+	int		(*turn_on_led)(struct rtsx_pcr *pcr);
+	int		(*turn_off_led)(struct rtsx_pcr *pcr);
+	int		(*enable_auto_blink)(struct rtsx_pcr *pcr);
+	int		(*disable_auto_blink)(struct rtsx_pcr *pcr);
+};
+
+enum PDEV_STAT  {PDEV_STAT_IDLE, PDEV_STAT_RUN};
+
+struct rtsx_pcr {
+	struct pci_dev			*pci;
+	unsigned int			id;
+
+	/* pci resources */
+	unsigned long			addr;
+	void __iomem			*remap_addr;
+	int				irq;
+
+	/* host reserved buffer */
+	void				*rtsx_resv_buf;
+	dma_addr_t			rtsx_resv_buf_addr;
+
+	void				*host_cmds_ptr;
+	dma_addr_t			host_cmds_addr;
+	int				ci;
+
+	void				*host_sg_tbl_ptr;
+	dma_addr_t			host_sg_tbl_addr;
+	int				sgi;
+
+	u32				int_reg;
+	char				trans_result;
+	char				trans_state;
+
+	int				need_reset;
+	int				need_release;
+
+	struct delayed_work		carddet_work;
+	struct timer_list		idle_timer;
+	struct work_struct		idle_work;
+
+	spinlock_t			lock;
+	struct mutex			pcr_mutex;
+	struct completion		*done;
+	struct completion		*finish_me;
+
+	bool				remove_pci;
+	bool				msi_en;
+
+#define EXTRA_CAPS_SD_SDR50		(1 << 0)
+#define EXTRA_CAPS_SD_SDR104		(1 << 1)
+#define EXTRA_CAPS_SD_DDR50		(1 << 2)
+#define EXTRA_CAPS_MMC_HSDDR		(1 << 3)
+#define EXTRA_CAPS_MMC_HS200		(1 << 4)
+#define EXTRA_CAPS_MMC_8BIT		(1 << 5)
+	u32				extra_caps;
+
+#define IC_VER_A			0
+#define IC_VER_B			1
+#define IC_VER_C			2
+#define IC_VER_D			3
+	u8				ic_version;
+
+	struct reg_val			rval;
+	const u32			*sd_pull_ctl_enable_tbl;
+	const u32			*sd_pull_ctl_disable_tbl;
+
+	const struct pcr_ops		*ops;
+	enum PDEV_STAT			state;
+
+	int				num_slots;
+	struct rtsx_slot		*slots;
+};
+
+#define CHK_PCI_PID(pcr, pid)		((pcr)->pci->device == (pid))
+#define PCI_VID(pcr)			((pcr)->pci->vendor)
+#define PCI_PID(pcr)			((pcr)->pci->device)
+
+void rtsx_pci_start_run(struct rtsx_pcr *pcr);
+int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data);
+int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data);
+int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
+int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
+void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr);
+void rtsx_pci_add_cmd(struct rtsx_pcr *pcr,
+		u8 cmd_type, u16 reg_addr, u8 mask, u8 data);
+void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr);
+int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout);
+int rtsx_pci_transfer_data(struct rtsx_pcr *pcr,
+		void *buf, size_t len, int use_sg, int read, int timeout);
+int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
+int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
+int rtsx_pci_sd_pull_ctl_enable(struct rtsx_pcr *pcr);
+int rtsx_pci_sd_pull_ctl_disable(struct rtsx_pcr *pcr);
+int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
+void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr);
+
+static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr)
+{
+	return (u8 *)(pcr->host_cmds_ptr);
+}
+
+#endif