diff mbox

[1/8] arm: sam9_l9260_defconfig: adjust UBI bad eraseblocks limit

Message ID 1345214124-5478-2-git-send-email-richard.genoud@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Richard Genoud Aug. 17, 2012, 2:35 p.m. UTC 
From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI has changed the MTD_UBI_BEB_LIMIT semantics. It used to be a percent of
total amount of eraseblock in the partition, and now it is the maximum
amount of bad eraseblocks on the entire devise per 1024 eraseblocks. So not
only the units changed, but also the meaning. But anyway, old 3% roughly
correspond to new 30, so change the defconfig correspondingly.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
---
 arch/arm/configs/sam9_l9260_defconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Comments

Artem Bityutskiy Aug. 19, 2012, 7:21 p.m. UTC | #1 
On Fri, 2012-08-17 at 16:35 +0200, Richard Genoud wrote:
> diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
> index da276f9..d11fea5 100644
> --- a/arch/arm/configs/sam9_l9260_defconfig
> +++ b/arch/arm/configs/sam9_l9260_defconfig
> @@ -39,7 +39,7 @@ CONFIG_MTD_NAND=y
>  CONFIG_MTD_NAND_ATMEL=y
>  CONFIG_MTD_NAND_PLATFORM=y
>  CONFIG_MTD_UBI=y
> -CONFIG_MTD_UBI_BEB_LIMIT=3
> +CONFIG_MTD_UBI_BEB_LIMIT=30

I'll just remove this from from the defconfig and make it use the
default, which is more sensible for this device, as your research
showed.
Jean-Christophe PLAGNIOL-VILLARD Aug. 20, 2012, 7:56 a.m. UTC | #2 
On 16:35 Fri 17 Aug     , Richard Genoud wrote:
> From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
> 
> UBI has changed the MTD_UBI_BEB_LIMIT semantics. It used to be a percent of
> total amount of eraseblock in the partition, and now it is the maximum
> amount of bad eraseblocks on the entire devise per 1024 eraseblocks. So not
> only the units changed, but also the meaning. But anyway, old 3% roughly
> correspond to new 30, so change the defconfig correspondingly.
> 
> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
simply drop this defconfig

Best Regards,
J.
diff mbox

Patch

diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index da276f9..d11fea5 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -39,7 +39,7 @@  CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=3
+CONFIG_MTD_UBI_BEB_LIMIT=30
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y