diff mbox

pwm-imx: Fix config / enable / disable

Message ID 1305545087.2775440.1345755837651.JavaMail.root@advansee.com (mailing list archive)
State New, archived
Headers show

Commit Message

Benoît Thébaudeau Aug. 23, 2012, 9:03 p.m. UTC 
imx_pwm_config() did not enable the PWM IP clock while accessing the registers.
Hence, a call to pwm_config() had no effect before pwm_enable() had been called,
which does not comply to the PWM API.

Moreover, calling pwm_disable() then pwm_enable() must be a transparent
operation.

This fixes the first setting of brightness through sysfs that had no effect with
leds-pwm.

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: <linux-kernel@vger.kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
---
 .../drivers/pwm/pwm-imx.c                          |   55 +++++++++++++++-----
 1 file changed, 43 insertions(+), 12 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Sascha Hauer Aug. 28, 2012, 7:37 a.m. UTC | #1 
On Thu, Aug 23, 2012 at 11:03:57PM +0200, Benoît Thébaudeau wrote:
> imx_pwm_config() did not enable the PWM IP clock while accessing the registers.
> Hence, a call to pwm_config() had no effect before pwm_enable() had been called,
> which does not comply to the PWM API.
> 
> Moreover, calling pwm_disable() then pwm_enable() must be a transparent
> operation.
> 
> This fixes the first setting of brightness through sysfs that had no effect with
> leds-pwm.

I don't really like this patch. I'd like to have this one first, it
makes further cleanups easier:

https://lkml.org/lkml/2012/8/28/24

Simililarly, we should probably introduce a imx_pwm_[en|dis]able_v[12]

Then, the pwm core already makes sure that pwm_enable/disable are called
only once, so the if (imx->clk_enabled) in pwm_enable/disable is
unnecessary.

Sascha

> 
> Cc: Thierry Reding <thierry.reding@avionic-design.de>
> Cc: <linux-kernel@vger.kernel.org>
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: <linux-arm-kernel@lists.infradead.org>
> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
> ---
>  .../drivers/pwm/pwm-imx.c                          |   55 +++++++++++++++-----
>  1 file changed, 43 insertions(+), 12 deletions(-)
> 
> diff --git linux-next-c94456b.orig/drivers/pwm/pwm-imx.c linux-next-c94456b/drivers/pwm/pwm-imx.c
> index 2a0b353..0519bf2 100644
> --- linux-next-c94456b.orig/drivers/pwm/pwm-imx.c
> +++ linux-next-c94456b/drivers/pwm/pwm-imx.c
> @@ -55,6 +55,16 @@ static int imx_pwm_config(struct pwm_chip *chip,
>  {
>  	struct imx_chip *imx = to_imx_chip(chip);
>  
> +	/*
> +	 * If the PWM is disabled, make sure to turn on the clock before
> +	 * accessing the registers.
> +	 */
> +	if (!imx->clk_enabled) {
> +		int rc = clk_prepare_enable(imx->clk);
> +		if (rc)
> +			return rc;
> +	}
> +
>  	if (!(cpu_is_mx1() || cpu_is_mx21())) {
>  		unsigned long long c;
>  		unsigned long period_cycles, duty_cycles, prescale;
> @@ -85,8 +95,11 @@ static int imx_pwm_config(struct pwm_chip *chip,
>  		writel(period_cycles, imx->mmio_base + MX3_PWMPR);
>  
>  		cr = MX3_PWMCR_PRESCALER(prescale) |
> -			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
> -			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
> +			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | MX3_PWMCR_DBGEN;
> +
> +		/* If the PWM is enabled, keep it so. */
> +		if (imx->clk_enabled)
> +			cr |= MX3_PWMCR_EN;
>  
>  		if (cpu_is_mx25())
>  			cr |= MX3_PWMCR_CLKSRC_IPG;
> @@ -118,32 +131,50 @@ static int imx_pwm_config(struct pwm_chip *chip,
>  		BUG();
>  	}
>  
> +	/* If the PWM is disabled, turn the clock off again to save power. */
> +	if (!imx->clk_enabled)
> +		clk_disable_unprepare(imx->clk);
> +
>  	return 0;
>  }
>  
>  static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
>  {
>  	struct imx_chip *imx = to_imx_chip(chip);
> -	int rc = 0;
> +	int rc;
>  
> -	if (!imx->clk_enabled) {
> -		rc = clk_prepare_enable(imx->clk);
> -		if (!rc)
> -			imx->clk_enabled = 1;
> +	if (imx->clk_enabled)
> +		return 0;
> +
> +	rc = clk_prepare_enable(imx->clk);
> +	if (rc)
> +		return rc;
> +
> +	if (!(cpu_is_mx1() || cpu_is_mx21())) {
> +		u32 cr = readl(imx->mmio_base + MX3_PWMCR);
> +		cr |= MX3_PWMCR_EN;
> +		writel(cr, imx->mmio_base + MX3_PWMCR);
>  	}
> -	return rc;
> +
> +	imx->clk_enabled = 1;
> +	return 0;
>  }
>  
>  static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
>  {
>  	struct imx_chip *imx = to_imx_chip(chip);
>  
> -	writel(0, imx->mmio_base + MX3_PWMCR);
> +	if (!imx->clk_enabled)
> +		return;
>  
> -	if (imx->clk_enabled) {
> -		clk_disable_unprepare(imx->clk);
> -		imx->clk_enabled = 0;
> +	if (!(cpu_is_mx1() || cpu_is_mx21())) {
> +		u32 cr = readl(imx->mmio_base + MX3_PWMCR);
> +		cr &= ~MX3_PWMCR_EN;
> +		writel(cr, imx->mmio_base + MX3_PWMCR);
>  	}
> +
> +	clk_disable_unprepare(imx->clk);
> +	imx->clk_enabled = 0;
>  }
>  
>  static struct pwm_ops imx_pwm_ops = {
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
diff mbox

Patch

diff --git linux-next-c94456b.orig/drivers/pwm/pwm-imx.c linux-next-c94456b/drivers/pwm/pwm-imx.c
index 2a0b353..0519bf2 100644
--- linux-next-c94456b.orig/drivers/pwm/pwm-imx.c
+++ linux-next-c94456b/drivers/pwm/pwm-imx.c
@@ -55,6 +55,16 @@  static int imx_pwm_config(struct pwm_chip *chip,
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 
+	/*
+	 * If the PWM is disabled, make sure to turn on the clock before
+	 * accessing the registers.
+	 */
+	if (!imx->clk_enabled) {
+		int rc = clk_prepare_enable(imx->clk);
+		if (rc)
+			return rc;
+	}
+
 	if (!(cpu_is_mx1() || cpu_is_mx21())) {
 		unsigned long long c;
 		unsigned long period_cycles, duty_cycles, prescale;
@@ -85,8 +95,11 @@  static int imx_pwm_config(struct pwm_chip *chip,
 		writel(period_cycles, imx->mmio_base + MX3_PWMPR);
 
 		cr = MX3_PWMCR_PRESCALER(prescale) |
-			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
-			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
+			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | MX3_PWMCR_DBGEN;
+
+		/* If the PWM is enabled, keep it so. */
+		if (imx->clk_enabled)
+			cr |= MX3_PWMCR_EN;
 
 		if (cpu_is_mx25())
 			cr |= MX3_PWMCR_CLKSRC_IPG;
@@ -118,32 +131,50 @@  static int imx_pwm_config(struct pwm_chip *chip,
 		BUG();
 	}
 
+	/* If the PWM is disabled, turn the clock off again to save power. */
+	if (!imx->clk_enabled)
+		clk_disable_unprepare(imx->clk);
+
 	return 0;
 }
 
 static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
-	int rc = 0;
+	int rc;
 
-	if (!imx->clk_enabled) {
-		rc = clk_prepare_enable(imx->clk);
-		if (!rc)
-			imx->clk_enabled = 1;
+	if (imx->clk_enabled)
+		return 0;
+
+	rc = clk_prepare_enable(imx->clk);
+	if (rc)
+		return rc;
+
+	if (!(cpu_is_mx1() || cpu_is_mx21())) {
+		u32 cr = readl(imx->mmio_base + MX3_PWMCR);
+		cr |= MX3_PWMCR_EN;
+		writel(cr, imx->mmio_base + MX3_PWMCR);
 	}
-	return rc;
+
+	imx->clk_enabled = 1;
+	return 0;
 }
 
 static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 
-	writel(0, imx->mmio_base + MX3_PWMCR);
+	if (!imx->clk_enabled)
+		return;
 
-	if (imx->clk_enabled) {
-		clk_disable_unprepare(imx->clk);
-		imx->clk_enabled = 0;
+	if (!(cpu_is_mx1() || cpu_is_mx21())) {
+		u32 cr = readl(imx->mmio_base + MX3_PWMCR);
+		cr &= ~MX3_PWMCR_EN;
+		writel(cr, imx->mmio_base + MX3_PWMCR);
 	}
+
+	clk_disable_unprepare(imx->clk);
+	imx->clk_enabled = 0;
 }
 
 static struct pwm_ops imx_pwm_ops = {