| Message ID | 1346845260-10978-3-git-send-email-anilkumar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* AnilKumar Ch <anilkumar@ti.com> [120905 04:42]: > Adds GPIO pinctrl nodes to am3358_pinmux master node to control > user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. > > [koen@dominion.thruhere.net: led0, led1 suggested by koen] > Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > --- > arch/arm/boot/dts/am335x-bone.dts | 43 +++++++++++++++++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts > index c634f87..822efe6 100644 > --- a/arch/arm/boot/dts/am335x-bone.dts > +++ b/arch/arm/boot/dts/am335x-bone.dts > @@ -18,11 +18,54 @@ > reg = <0x80000000 0x10000000>; /* 256 MB */ > }; > > + am3358_pinmux: pinmux@44e10800 { > + userled_pins: pinmux_userled_pins { > + pinctrl-single,pins = < > + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ > + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ > + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ > + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ > + >; > + }; > + }; > + Just checking.. am3358_pinmux should be am33xx_pinmux in this patch too as discussed. Regards, Tony
Tony, On Fri, Sep 07, 2012 at 02:28:12, Tony Lindgren wrote: > * AnilKumar Ch <anilkumar@ti.com> [120905 04:42]: > > Adds GPIO pinctrl nodes to am3358_pinmux master node to control > > user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. > > > > [koen@dominion.thruhere.net: led0, led1 suggested by koen] > > Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > > --- > > arch/arm/boot/dts/am335x-bone.dts | 43 +++++++++++++++++++++++++++++++++++++ > > 1 file changed, 43 insertions(+) > > > > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts > > index c634f87..822efe6 100644 > > --- a/arch/arm/boot/dts/am335x-bone.dts > > +++ b/arch/arm/boot/dts/am335x-bone.dts > > @@ -18,11 +18,54 @@ > > reg = <0x80000000 0x10000000>; /* 256 MB */ > > }; > > > > + am3358_pinmux: pinmux@44e10800 { > > + userled_pins: pinmux_userled_pins { > > + pinctrl-single,pins = < > > + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ > > + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ > > + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ > > + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ > > + >; > > + }; > > + }; > > + > > Just checking.. am3358_pinmux should be am33xx_pinmux in this patch > too as discussed. > Yes, this is also changed in v7. Thanks AnilKumar
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87..822efe6 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -18,11 +18,54 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am3358_pinmux: pinmux@44e10800 { + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + heartbeat { + label = "beaglebone:green:usr0"; + gpios = <&gpio2 21 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + mmc { + label = "beaglebone:green:usr1"; + gpios = <&gpio2 22 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led2 { + label = "beaglebone:green:usr2"; + gpios = <&gpio2 23 0>; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr3"; + gpios = <&gpio2 24 0>; + default-state = "off"; + }; + }; + i2c1: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>;
Adds GPIO pinctrl nodes to am3358_pinmux master node to control user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. [koen@dominion.thruhere.net: led0, led1 suggested by koen] Signed-off-by: AnilKumar Ch <anilkumar@ti.com> --- arch/arm/boot/dts/am335x-bone.dts | 43 +++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)