| Message ID | 503F4E19.1050700@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Em Thu, 30 Aug 2012 13:27:21 +0200 Anders Thomson <aeriksson2@gmail.com> escreveu: > Hi, > > Ever since 2.6.26 or so (where there was a code reorg) I had to carry > this patch. > Without it the received signal is noisy, and the card worked fine prior > to the code > reorg. This patch is a hack, mostly as a result of my inability to > follow the code > paths (and bisect failing). I'd be more than willing to test whatever > the proper > patch might be prior to any mainlining. > > Thanks, > /Anders > > > > $ cat /TV_CARD.diff > diff --git a/drivers/media/common/tuners/tda8290.c > b/drivers/media/common/tuners/tda8290.c > index 064d14c..498cc7b 100644 > --- a/drivers/media/common/tuners/tda8290.c > +++ b/drivers/media/common/tuners/tda8290.c > @@ -635,7 +635,11 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) > > dvb_attach(tda827x_attach, fe, priv->tda827x_addr, > priv->i2c_props.adap, &priv->cfg); > + tuner_info("ANDERS: setting switch_addr. was 0x%02x, new > 0x%02x\n",priv->cfg.switch_addr,priv->i2c_props.addr); > priv->cfg.switch_addr = priv->i2c_props.addr; > + priv->cfg.switch_addr = 0xc2 / 2; No, this is wrong. The I2C address is passed by the bridge driver or by the tuner_core attachment, being stored at priv->i2c_props.addr. What's the driver and card you're using? > + tuner_info("ANDERS: new 0x%02x\n",priv->cfg.switch_addr); > + > } > if (fe->ops.tuner_ops.init) > fe->ops.tuner_ops.init(fe); > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2012-09-15 18:34, Mauro Carvalho Chehab wrote: > > $ cat /TV_CARD.diff > > diff --git a/drivers/media/common/tuners/tda8290.c > > b/drivers/media/common/tuners/tda8290.c > > index 064d14c..498cc7b 100644 > > --- a/drivers/media/common/tuners/tda8290.c > > +++ b/drivers/media/common/tuners/tda8290.c > > @@ -635,7 +635,11 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) > > > > dvb_attach(tda827x_attach, fe, priv->tda827x_addr, > > priv->i2c_props.adap,&priv->cfg); > > + tuner_info("ANDERS: setting switch_addr. was 0x%02x, new > > 0x%02x\n",priv->cfg.switch_addr,priv->i2c_props.addr); > > priv->cfg.switch_addr = priv->i2c_props.addr; > > + priv->cfg.switch_addr = 0xc2 / 2; > > No, this is wrong. The I2C address is passed by the bridge driver or by > the tuner_core attachment, being stored at priv->i2c_props.addr. > > What's the driver and card you're using? > lspci -vv: 03:06.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) Subsystem: Pinnacle Systems Inc. Device 002f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Kernel driver in use: saa7134 Kernel modules: saa7134 Without the patch I get a layer of noise added. Kind of like a weak aerial signal to an old analogue TV set. -Anders -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2012-09-15 19:39, Anders Thomson wrote: > On 2012-09-15 18:34, Mauro Carvalho Chehab wrote: > > > $ cat /TV_CARD.diff > > > diff --git a/drivers/media/common/tuners/tda8290.c > > > b/drivers/media/common/tuners/tda8290.c > > > index 064d14c..498cc7b 100644 > > > --- a/drivers/media/common/tuners/tda8290.c > > > +++ b/drivers/media/common/tuners/tda8290.c > > > @@ -635,7 +635,11 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) > > > > > > dvb_attach(tda827x_attach, fe, priv->tda827x_addr, > > > priv->i2c_props.adap,&priv->cfg); > > > + tuner_info("ANDERS: setting switch_addr. was 0x%02x, new > > > 0x%02x\n",priv->cfg.switch_addr,priv->i2c_props.addr); > > > priv->cfg.switch_addr = priv->i2c_props.addr; > > > + priv->cfg.switch_addr = 0xc2 / 2; > > > > No, this is wrong. The I2C address is passed by the bridge driver or by > > the tuner_core attachment, being stored at priv->i2c_props.addr. > > > > What's the driver and card you're using? > > > ...and here's the modules I'm using Module Size Used by hid_sunplus 1321 0 usbhid 29765 0 uinput 6426 2 saa7134_alsa 9359 0 tda1004x 12639 1 saa7134_dvb 22092 0 videobuf_dvb 4106 1 saa7134_dvb dvb_core 78773 1 videobuf_dvb ir_kbd_i2c 4473 0 tda827x 8291 2 tda8290 11906 1 tuner 13649 1 uvcvideo 54515 0 videobuf2_core 15467 1 uvcvideo snd_hda_codec_realtek 46581 1 saa7134 149350 2 saa7134_alsa,saa7134_dvb videobuf_dma_sg 6504 3 saa7134_alsa,saa7134_dvb,saa7134 videobuf_core 12866 3 videobuf_dvb,saa7134,videobuf_dma_sg snd_hda_intel 20144 1 snd_hda_codec 59409 2 snd_hda_codec_realtek,snd_hda_intel v4l2_common 4558 2 tuner,saa7134 videodev 68383 4 tuner,uvcvideo,saa7134,v4l2_common snd_usb_audio 81087 0 lirc_dev 9954 0 ir_mce_kbd_decoder 2838 0 parport_pc 27310 0 rc_imon_mce 1349 0 v4l2_compat_ioctl32 6796 1 videodev ir_rc6_decoder 1946 0 videobuf2_vmalloc 1812 1 uvcvideo snd_usbmidi_lib 15516 1 snd_usb_audio tveeprom 12721 1 saa7134 snd_hwdep 5006 2 snd_hda_codec,snd_usb_audio asus_atk0110 7054 0 parport 24807 1 parport_pc i2c_piix4 7680 0 videobuf2_memops 1638 1 videobuf2_vmalloc ir_rc5_decoder 1433 0 imon 18432 1 rc_core 10749 8 ir_kbd_i2c,saa7134,ir_mce_kbd_decoder,rc_imon_mce,ir_rc6_decoder,ir_rc5_decoder,imon pcspkr 1659 0 atiixp 2404 0 rtc_cmos 7570 0 sg 20980 0 snd_rawmidi 14984 1 snd_usbmidi_lib -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Em Sat, 15 Sep 2012 19:39:31 +0200 Anders Thomson <aeriksson2@gmail.com> escreveu: > On 2012-09-15 18:34, Mauro Carvalho Chehab wrote: > > > $ cat /TV_CARD.diff > > > diff --git a/drivers/media/common/tuners/tda8290.c > > > b/drivers/media/common/tuners/tda8290.c > > > index 064d14c..498cc7b 100644 > > > --- a/drivers/media/common/tuners/tda8290.c > > > +++ b/drivers/media/common/tuners/tda8290.c > > > @@ -635,7 +635,11 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) > > > > > > dvb_attach(tda827x_attach, fe, priv->tda827x_addr, > > > priv->i2c_props.adap,&priv->cfg); > > > + tuner_info("ANDERS: setting switch_addr. was 0x%02x, new > > > 0x%02x\n",priv->cfg.switch_addr,priv->i2c_props.addr); > > > priv->cfg.switch_addr = priv->i2c_props.addr; > > > + priv->cfg.switch_addr = 0xc2 / 2; > > > > No, this is wrong. The I2C address is passed by the bridge driver or by > > the tuner_core attachment, being stored at priv->i2c_props.addr. > > > > What's the driver and card you're using? > > > lspci -vv: > 03:06.0 Multimedia controller: Philips Semiconductors > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > Subsystem: Pinnacle Systems Inc. Device 002f There are lots of Pinnacle device supported by saa7134 driver. Without its PCI ID that's not much we can do. Also, please post the dmesg showing what happens without and with your patch. Regards, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2012-09-15 19:58, Mauro Carvalho Chehab wrote: > Em Sat, 15 Sep 2012 19:39:31 +0200 > Anders Thomson<aeriksson2@gmail.com> escreveu: > > > On 2012-09-15 18:34, Mauro Carvalho Chehab wrote: > > > > $ cat /TV_CARD.diff > > > > diff --git a/drivers/media/common/tuners/tda8290.c > > > > b/drivers/media/common/tuners/tda8290.c > > > > index 064d14c..498cc7b 100644 > > > > --- a/drivers/media/common/tuners/tda8290.c > > > > +++ b/drivers/media/common/tuners/tda8290.c > > > > @@ -635,7 +635,11 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) > > > > > > > > dvb_attach(tda827x_attach, fe, priv->tda827x_addr, > > > > priv->i2c_props.adap,&priv->cfg); > > > > + tuner_info("ANDERS: setting switch_addr. was 0x%02x, new > > > > 0x%02x\n",priv->cfg.switch_addr,priv->i2c_props.addr); > > > > priv->cfg.switch_addr = priv->i2c_props.addr; > > > > + priv->cfg.switch_addr = 0xc2 / 2; > > > > > > No, this is wrong. The I2C address is passed by the bridge driver or by > > > the tuner_core attachment, being stored at priv->i2c_props.addr. > > > > > > What's the driver and card you're using? > > > > > lspci -vv: > > 03:06.0 Multimedia controller: Philips Semiconductors > > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > > Subsystem: Pinnacle Systems Inc. Device 002f > > There are lots of Pinnacle device supported by saa7134 driver. Without its > PCI ID that's not much we can do. That here, right? lspci -nvv: 03:06.0 0480: 1131:7133 (rev d1) Subsystem: 11bd:002f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Kernel driver in use: saa7134 Kernel modules: saa7134 > Also, please post the dmesg showing what happens without and with your patch. Coming. Hold on... > Regards, > Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2012-09-15 19:58, Mauro Carvalho Chehab wrote: > Em Sat, 15 Sep 2012 19:39:31 +0200 > Anders Thomson<aeriksson2@gmail.com> escreveu: > > > On 2012-09-15 18:34, Mauro Carvalho Chehab wrote: > > > > $ cat /TV_CARD.diff > > > > diff --git a/drivers/media/common/tuners/tda8290.c > > > > b/drivers/media/common/tuners/tda8290.c > > > > index 064d14c..498cc7b 100644 > > > > --- a/drivers/media/common/tuners/tda8290.c > > > > +++ b/drivers/media/common/tuners/tda8290.c > > > > @@ -635,7 +635,11 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) > > > > > > > > dvb_attach(tda827x_attach, fe, priv->tda827x_addr, > > > > priv->i2c_props.adap,&priv->cfg); > > > > + tuner_info("ANDERS: setting switch_addr. was 0x%02x, new > > > > 0x%02x\n",priv->cfg.switch_addr,priv->i2c_props.addr); > > > > priv->cfg.switch_addr = priv->i2c_props.addr; > > > > + priv->cfg.switch_addr = 0xc2 / 2; > > > > > > No, this is wrong. The I2C address is passed by the bridge driver or by > > > the tuner_core attachment, being stored at priv->i2c_props.addr. > > > > > > What's the driver and card you're using? > > > > > lspci -vv: > > 03:06.0 Multimedia controller: Philips Semiconductors > > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > > Subsystem: Pinnacle Systems Inc. Device 002f > > There are lots of Pinnacle device supported by saa7134 driver. Without its > PCI ID that's not much we can do. > > Also, please post the dmesg showing what happens without and with your patch. dmesg, vanilla 3.3.8: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.8 (root@tv) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #70 SMP PREEMPT Sat Sep 15 20:22:03 CEST 2012 [ 0.000000] Command line: root=/dev/sda3 hpet=disable crashkernel=128M [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ee0000 (usable) [ 0.000000] BIOS-e820: 0000000077ee0000 - 0000000077ee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ee3000 - 0000000077ef0000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077f00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/M2A-VM HDMI, BIOS ASUS M2A-VM HDMI ACPI BIOS Revision 2201 10/22/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x77ee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 base 0077F00000 mask FFFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f6560] f6560 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-0000000077ee0000 [ 0.000000] 0000000000 - 0077e00000 page 2M [ 0.000000] 0077e00000 - 0077ee0000 page 4k [ 0.000000] kernel direct mapping tables up to 77ee0000 @ 1fffc000-20000000 [ 0.000000] Reserving 128MB of memory at 768MB for crashkernel (System RAM: 1918MB) [ 0.000000] ACPI: RSDP 00000000000f8210 00024 (v02 ATI ) [ 0.000000] ACPI: XSDT 0000000077ee3100 00044 (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0000000077ee8500 000F4 (v03 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0000000077ee3280 05210 (v01 ATI ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0000000077ee0000 00040 [ 0.000000] ACPI: SSDT 0000000077ee8740 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 0000000077ee8b00 0003C (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0000000077ee8640 00084 (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075800000-ffff8800773fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077ee0 [ 0.000000] On node 0 totalpages: 491119 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6661 pages used for memmap [ 0.000000] DMA32 zone: 480475 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 77f00000 (gap: 77f00000:68100000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880077c00000 s71424 r8192 d22784 u524288 [ 0.000000] pcpu-alloc: s71424 r8192 d22784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 484397 [ 0.000000] Kernel command line: root=/dev/sda3 hpet=disable crashkernel=128M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 1066000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1791420k/1964928k available (5100k kernel code, 452k absent, 173056k reserved, 3466k data, 456k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 7864320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2799.741 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.002038] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.48 BogoMIPS (lpj=2799741) [ 0.002109] pid_max: default: 32768 minimum: 301 [ 0.002215] Mount-cache hash table entries: 256 [ 0.002390] Initializing cgroup subsys cpuacct [ 0.002426] Initializing cgroup subsys memory [ 0.002474] Initializing cgroup subsys devices [ 0.003003] Initializing cgroup subsys freezer [ 0.003038] Initializing cgroup subsys blkio [ 0.003108] tseg: 0077f00000 [ 0.003110] CPU: Physical Processor ID: 0 [ 0.003145] CPU: Processor Core ID: 0 [ 0.003180] mce: CPU supports 5 MCE banks [ 0.003226] using AMD E400 aware idle routine [ 0.003299] ACPI: Core revision 20120111 [ 0.006535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.016582] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 [ 0.016998] Performance Events: AMD PMU driver. [ 0.016998] ... version: 0 [ 0.016998] ... bit width: 48 [ 0.016998] ... generic registers: 4 [ 0.016998] ... value mask: 0000ffffffffffff [ 0.016998] ... max period: 00007fffffffffff [ 0.016998] ... fixed-purpose events: 0 [ 0.016998] ... event mask: 000000000000000f [ 0.028011] Booting Node 0, Processors #1 [ 0.028073] smpboot cpu 1: start_ip = 9a000 [ 0.099087] Brought up 2 CPUs [ 0.099121] Total of 2 processors activated (11198.19 BogoMIPS). [ 0.099618] PM: Registering ACPI NVS region at 77ee0000 (12288 bytes) [ 0.100061] NET: Registered protocol family 16 [ 0.100114] node 0 link 0: io port [c000, ffff] [ 0.100114] TOM: 0000000080000000 aka 2048M [ 0.100114] node 0 link 0: mmio [a0000, bffff] [ 0.100114] node 0 link 0: mmio [80000000, dfffffff] [ 0.100114] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.100114] node 0 link 0: mmio [e0000000, e03fffff] [ 0.100114] bus: [00, 03] on node 0 link 0 [ 0.100114] bus: 00 index 0 [io 0x0000-0xffff] [ 0.100114] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.100114] bus: 00 index 2 [mem 0x80000000-0xefffffff] [ 0.100114] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] [ 0.100114] ACPI: bus type pci registered [ 0.100121] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.100121] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.118731] PCI: Using configuration type 1 for base access [ 0.126068] bio: create slab <bio-0> at 0 [ 0.126123] ACPI: Added _OSI(Module Device) [ 0.126123] ACPI: Added _OSI(Processor Device) [ 0.126123] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.126125] ACPI: Added _OSI(Processor Aggregator Device) [ 0.127242] ACPI: EC: Look up EC in DSDT [ 0.130804] ACPI: Interpreter enabled [ 0.130842] ACPI: (supports S0 S1 S3 S4 S5) [ 0.131024] ACPI: Using IOAPIC for interrupt routing [ 0.136096] ACPI: No dock devices found. [ 0.136139] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.136238] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.136344] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.136381] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.136418] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.136457] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.136497] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.137066] PCI host bridge to bus 0000:00 [ 0.137066] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.137078] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.137114] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.137150] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.137187] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.137233] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.137262] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 [ 0.137299] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604 [ 0.137328] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.137358] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.137377] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07] [ 0.137387] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03] [ 0.137398] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07] [ 0.137408] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03] [ 0.137418] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f] [ 0.137429] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.137450] pci 0000:00:12.0: set SATA to AHCI mode [ 0.137522] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.137536] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.137604] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.137619] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.137687] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.137702] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.137770] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.137784] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.137854] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.137868] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.138040] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.138060] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.138147] pci 0000:00:13.5: supports D1 D2 [ 0.138149] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.138174] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.138197] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.138284] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.138298] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.138309] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.138319] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.138329] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.138340] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f] [ 0.138380] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.138403] pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff 64bit] [ 0.138473] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.138489] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.138567] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.138616] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.138634] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.138647] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.138662] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.138705] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300 [ 0.138713] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.138719] pci 0000:01:05.0: reg 18: [mem 0xfdbe0000-0xfdbeffff 64bit] [ 0.138724] pci 0000:01:05.0: reg 20: [io 0xde00-0xdeff] [ 0.138729] pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff] [ 0.138744] pci 0000:01:05.0: supports D1 D2 [ 0.138755] pci 0000:01:05.2: [1002:7919] type 0 class 0x000403 [ 0.138763] pci 0000:01:05.2: reg 10: [mem 0xfdbfc000-0xfdbfffff 64bit] [ 0.138799] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.138836] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.138839] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.138843] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.138883] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.138897] pci 0000:02:00.0: reg 10: [io 0xee00-0xeeff] [ 0.138921] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit] [ 0.138950] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.139028] pci 0000:02:00.0: supports D1 D2 [ 0.139030] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.139047] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.139094] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.139131] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.139134] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.139138] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.139175] pci 0000:03:06.0: [1131:7133] type 0 class 0x000480 [ 0.139200] pci 0000:03:06.0: reg 10: [mem 0xfdeff000-0xfdeff7ff] [ 0.139302] pci 0000:03:06.0: supports D1 D2 [ 0.139325] pci 0000:03:07.0: [1106:3044] type 0 class 0x000c00 [ 0.139348] pci 0000:03:07.0: reg 10: [mem 0xfdefe000-0xfdefe7ff] [ 0.139362] pci 0000:03:07.0: reg 14: [io 0xcf00-0xcf7f] [ 0.139457] pci 0000:03:07.0: supports D2 [ 0.139459] pci 0000:03:07.0: PME# supported from D2 D3hot D3cold [ 0.139509] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.139547] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.139552] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.139556] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.139559] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.139562] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.139564] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.139567] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.139570] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.139581] pci_bus 0000:00: on NUMA node 0 [ 0.139584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.139730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.139801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.139828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.139859] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.139897] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.139936] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.154048] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.154443] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.155085] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.155482] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.155877] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.156289] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.156683] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) [ 0.157033] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.157418] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.157418] vgaarb: loaded [ 0.157418] vgaarb: bridge control possible 0000:01:05.0 [ 0.157418] SCSI subsystem initialized [ 0.158009] libata version 3.00 loaded. [ 0.158021] usbcore: registered new interface driver usbfs [ 0.158051] usbcore: registered new interface driver hub [ 0.158051] usbcore: registered new device driver usb [ 0.158051] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.158051] PCI: Using ACPI for IRQ routing [ 0.167908] PCI: pci_cache_line_size set to 64 bytes [ 0.167992] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.167994] reserve RAM buffer: 0000000077ee0000 - 0000000077ffffff [ 0.168064] Bluetooth: Core ver 2.16 [ 0.168068] NET: Registered protocol family 31 [ 0.168068] Bluetooth: HCI device and connection manager initialized [ 0.168070] Bluetooth: HCI socket layer initialized [ 0.168105] Bluetooth: L2CAP socket layer initialized [ 0.168985] Bluetooth: SCO socket layer initialized [ 0.169090] pnp: PnP ACPI init [ 0.169090] ACPI: bus type pnp registered [ 0.169150] pnp 00:00: [bus 00-ff] [ 0.169153] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.169155] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.169157] pnp 00:00: [io 0x0d00-0xffff window] [ 0.169160] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.169162] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.169165] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.169222] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.169222] pnp 00:01: [io 0x4100-0x411f] [ 0.169222] pnp 00:01: [io 0x0228-0x022f] [ 0.169222] pnp 00:01: [io 0x040b] [ 0.169222] pnp 00:01: [io 0x04d6] [ 0.169222] pnp 00:01: [io 0x0c00-0x0c01] [ 0.169222] pnp 00:01: [io 0x0c14] [ 0.169222] pnp 00:01: [io 0x0c50-0x0c52] [ 0.169222] pnp 00:01: [io 0x0c6c-0x0c6d] [ 0.169222] pnp 00:01: [io 0x0c6f] [ 0.169222] pnp 00:01: [io 0x0cd0-0x0cd1] [ 0.169222] pnp 00:01: [io 0x0cd2-0x0cd3] [ 0.169222] pnp 00:01: [io 0x0cd4-0x0cdf] [ 0.169222] pnp 00:01: [io 0x4000-0x40fe] [ 0.169222] pnp 00:01: [io 0x4210-0x4217] [ 0.169222] pnp 00:01: [io 0x0b10-0x0b1f] [ 0.169222] pnp 00:01: [mem 0x00000000-0x00000fff window] [ 0.169222] pnp 00:01: [mem 0xfee00400-0xfee00fff window] [ 0.169222] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.169222] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.169222] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.169985] system 00:01: [io 0x040b] has been reserved [ 0.170022] system 00:01: [io 0x04d6] has been reserved [ 0.170058] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.170094] system 00:01: [io 0x0c14] has been reserved [ 0.170130] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.170166] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.170201] system 00:01: [io 0x0c6f] has been reserved [ 0.170237] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.170273] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.170309] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.170345] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.170381] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.170417] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.170454] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.170494] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170587] pnp 00:02: [dma 4] [ 0.170589] pnp 00:02: [io 0x0000-0x000f] [ 0.170592] pnp 00:02: [io 0x0080-0x0090] [ 0.170594] pnp 00:02: [io 0x0094-0x009f] [ 0.170596] pnp 00:02: [io 0x00c0-0x00df] [ 0.170634] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.170634] pnp 00:03: [io 0x0070-0x0073] [ 0.170634] pnp 00:03: [irq 8] [ 0.170634] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.170634] pnp 00:04: [io 0x0061] [ 0.170634] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.170634] pnp 00:05: [io 0x00f0-0x00ff] [ 0.170634] pnp 00:05: [irq 13] [ 0.170634] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.170634] pnp 00:06: [io 0x0010-0x001f] [ 0.170634] pnp 00:06: [io 0x0022-0x003f] [ 0.170634] pnp 00:06: [io 0x0044-0x005f] [ 0.170634] pnp 00:06: [io 0x0062-0x0063] [ 0.170634] pnp 00:06: [io 0x0065-0x006f] [ 0.170634] pnp 00:06: [io 0x0074-0x007f] [ 0.170634] pnp 00:06: [io 0x0091-0x0093] [ 0.170634] pnp 00:06: [io 0x00a2-0x00bf] [ 0.170634] pnp 00:06: [io 0x00e0-0x00ef] [ 0.170634] pnp 00:06: [io 0x04d0-0x04d1] [ 0.170984] pnp 00:06: [io 0x0220-0x0225] [ 0.171042] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.171042] system 00:06: [io 0x0220-0x0225] has been reserved [ 0.171076] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.171200] pnp 00:07: [io 0x03f0-0x03f5] [ 0.171203] pnp 00:07: [io 0x03f7] [ 0.171212] pnp 00:07: [irq 6] [ 0.171214] pnp 00:07: [dma 2] [ 0.171262] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.171262] pnp 00:08: [io 0x03f8-0x03ff] [ 0.171262] pnp 00:08: [irq 4] [ 0.171262] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.171262] pnp 00:09: [io 0x0378-0x037f] [ 0.171265] pnp 00:09: [irq 7] [ 0.171320] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.172084] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.172138] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.172138] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.172162] pnp 00:0b: [mem 0x000cd600-0x000cffff] [ 0.172165] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.172167] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.172169] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.172171] pnp 00:0b: [mem 0x77ef0000-0x77feffff] [ 0.172174] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.172176] pnp 00:0b: [mem 0x77ee0000-0x77efffff] [ 0.172179] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.172181] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.172183] pnp 00:0b: [mem 0x00100000-0x77edffff] [ 0.172185] pnp 00:0b: [mem 0x77ff0000-0x7ffeffff] [ 0.172188] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.172190] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.172192] pnp 00:0b: [mem 0xfff80000-0xfffeffff] [ 0.172259] system 00:0b: [mem 0x000cd600-0x000cffff] has been reserved [ 0.172259] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.172259] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.172259] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.172259] system 00:0b: [mem 0x77ef0000-0x77feffff] could not be reserved [ 0.172259] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.172259] system 00:0b: [mem 0x77ee0000-0x77efffff] could not be reserved [ 0.172260] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.172297] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.172334] system 00:0b: [mem 0x00100000-0x77edffff] could not be reserved [ 0.172371] system 00:0b: [mem 0x77ff0000-0x7ffeffff] could not be reserved [ 0.172407] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.172444] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.172480] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.172517] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.172524] pnp: PnP ACPI: found 12 devices [ 0.172984] ACPI: ACPI bus type pnp unregistered [ 0.181330] Switching to clocksource acpi_pm [ 0.181399] PCI: max bus depth: 1 pci_try_num: 2 [ 0.181419] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.181455] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.181492] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.181529] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.181573] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.181612] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.181648] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.181684] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.181721] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.181762] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.181799] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.181838] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.181877] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.181933] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.181935] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.181937] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.181940] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.181943] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff] [ 0.181945] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.181948] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff] [ 0.181950] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.181953] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.181955] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.181958] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.181960] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.181963] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.181965] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref] [ 0.181968] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.181970] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.181972] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.181975] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.181977] pci_bus 0000:03: resource 8 [mem 0x80000000-0xfebfffff] [ 0.181977] NET: Registered protocol family 2 [ 0.181977] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.182269] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.184768] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.185422] TCP: Hash tables configured (established 262144 bind 65536) [ 0.185459] TCP reno registered [ 0.185497] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.185551] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.185695] NET: Registered protocol family 1 [ 0.185858] RPC: Registered named UNIX socket transport module. [ 0.185904] RPC: Registered udp transport module. [ 0.185939] RPC: Registered tcp transport module. [ 0.185973] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.463071] pci 0000:01:05.0: Boot video device [ 0.463083] PCI: CLS 32 bytes, default 64 [ 0.463218] kvm: Nested Virtualization enabled [ 0.464192] audit: initializing netlink socket (disabled) [ 0.464241] type=2000 audit(1347733502.464:1): initialized [ 0.465367] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.465695] msgmni has been set to 3498 [ 0.466202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.466245] io scheduler noop registered [ 0.466306] io scheduler cfq registered (default) [ 0.466502] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X [ 0.467202] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.467246] ACPI: Power Button [PWRB] [ 0.467394] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.467436] ACPI: Power Button [PWRF] [ 0.467614] ACPI: Fan [FAN] (on) [ 0.469243] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20120111/nspredef-463) [ 0.469346] ACPI: [Package] has zero elements (ffff880074b6ae80) [ 0.469381] ACPI: Invalid passive threshold [ 0.469659] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.469695] ACPI: Thermal Zone [THRM] (40 C) [ 0.469960] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.490721] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.511850] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.512309] [drm] Initialized drm 1.1.0 20060810 [ 0.512402] [drm] radeon defaulting to kernel modesetting. [ 0.512438] [drm] radeon kernel modesetting enabled. [ 0.512724] [drm] initializing kernel modesetting (RS690 0x1002:0x791E 0x1043:0x826D). [ 0.512780] [drm] register mmio base: 0xFDBE0000 [ 0.512814] [drm] register mmio size: 65536 [ 0.514392] ATOM BIOS: ATI [ 0.514444] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) [ 0.514486] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 0.514526] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.514562] [drm] Driver supports precise vblank timestamp query. [ 0.514623] [drm] radeon: irq initialized. [ 0.515278] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.515318] [drm] RAM width 128bits DDR [ 0.515437] [TTM] Zone kernel: Available graphics memory: 895710 kiB. [ 0.515477] [TTM] Initializing pool allocator. [ 0.515519] [TTM] Initializing DMA pool allocator. [ 0.515583] [drm] radeon: 128M of VRAM memory ready [ 0.515618] [drm] radeon: 512M of GTT memory ready. [ 0.515655] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.522364] [drm] radeon: ib pool ready. [ 0.523410] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 0.529504] [drm] PCIE GART of 512M enabled (table at 0x0000000074680000). [ 0.529559] radeon 0000:01:05.0: WB enabled [ 0.529595] [drm] fence driver on ring 0 use gpu addr 0x80000000 and cpu addr 0xffff8800744c8000 [ 0.529754] [drm] Loading RS690/RS740 Microcode [ 0.529971] [drm] radeon: ring at 0x0000000080001000 [ 0.530031] [drm] ring test succeeded in 1 usecs [ 0.530178] [drm] ib test succeeded in 0 usecs [ 0.530978] [drm] Radeon Display Connectors [ 0.531023] [drm] Connector 0: [ 0.531058] [drm] VGA [ 0.531092] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 0.531130] [drm] Encoders: [ 0.531164] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.531199] [drm] Connector 1: [ 0.531232] [drm] S-video [ 0.531265] [drm] Encoders: [ 0.531299] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 0.531333] [drm] Connector 2: [ 0.531367] [drm] HDMI-A [ 0.531400] [drm] HPD2 [ 0.531434] [drm] DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c [ 0.531472] [drm] Encoders: [ 0.531506] [drm] DFP2: INTERNAL_DDI [ 0.531539] [drm] Connector 3: [ 0.531573] [drm] DVI-D [ 0.531607] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 0.531645] [drm] Encoders: [ 0.531678] [drm] DFP3: INTERNAL_LVTM1 [ 0.788240] [drm] fb mappable at 0xF0040000 [ 0.788275] [drm] vram apper at 0xF0000000 [ 0.788309] [drm] size 8294400 [ 0.788343] [drm] fb depth is 24 [ 0.788376] [drm] pitch is 7680 [ 0.788497] fbcon: radeondrmfb (fb0) is primary device [ 0.816768] Console: switching to colour frame buffer device 240x67 [ 0.826047] fb0: radeondrmfb frame buffer device [ 0.826081] drm: registered panic notifier [ 0.826115] [drm] Initialized radeon 2.13.0 20080528 for 0000:01:05.0 on minor 0 [ 0.829054] brd: module loaded [ 0.830587] loop: module loaded [ 0.830669] Uniform Multi-Platform E-IDE driver [ 0.830841] ide-gd driver 1.18 [ 0.831164] ahci 0000:00:12.0: version 3.0 [ 0.831213] ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA [ 0.831378] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.831442] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.833119] scsi0 : ahci [ 0.833451] scsi1 : ahci [ 0.833680] scsi2 : ahci [ 0.833903] scsi3 : ahci [ 0.834164] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.834221] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.834277] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.834333] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.834643] tun: Universal TUN/TAP device driver, 1.6 [ 0.834682] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.834813] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.834948] r8169 0000:02:00.0: irq 41 for MSI/MSI-X [ 0.835349] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000000c000, 00:1b:fc:89:fa:a2, XID 18000000 IRQ 41 [ 0.835427] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 0.835552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.835624] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.835669] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.835749] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.835819] ehci_hcd 0000:00:13.5: debug port 1 [ 0.835883] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 0.841023] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 0.841309] hub 1-0:1.0: USB hub found [ 0.841343] hub 1-0:1.0: 10 ports detected [ 0.841527] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.841596] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.841638] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.841726] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 0.896247] hub 2-0:1.0: USB hub found [ 0.896282] hub 2-0:1.0: 2 ports detected [ 0.896386] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.896429] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.896515] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 0.951240] hub 3-0:1.0: USB hub found [ 0.953009] hub 3-0:1.0: 2 ports detected [ 0.954826] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 0.956591] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.958365] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 1.015242] hub 4-0:1.0: USB hub found [ 1.016984] hub 4-0:1.0: 2 ports detected [ 1.018772] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.020537] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.022346] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.079252] hub 5-0:1.0: USB hub found [ 1.080925] hub 5-0:1.0: 2 ports detected [ 1.082754] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.084523] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.086322] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.143028] usb 1-3: new high-speed USB device number 2 using ehci_hcd [ 1.143252] hub 6-0:1.0: USB hub found [ 1.143260] hub 6-0:1.0: 2 ports detected [ 1.143525] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.143978] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.143983] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.144220] mousedev: PS/2 mouse device common for all mice [ 1.144450] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 1.144564] md: linear personality registered for level -1 [ 1.158755] device-mapper: uevent: version 1.0.3 [ 1.160668] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.162540] usbcore: registered new interface driver btusb [ 1.164313] cpuidle: using governor ladder [ 1.166130] cpuidle: using governor menu [ 1.168397] ALSA device list: [ 1.170193] No soundcards found. [ 1.171953] TCP cubic registered [ 1.173781] NET: Registered protocol family 10 [ 1.175735] NET: Registered protocol family 17 [ 1.177491] Bridge firewalling registered [ 1.179277] Bluetooth: RFCOMM TTY layer initialized [ 1.180977] Bluetooth: RFCOMM socket layer initialized [ 1.182769] Bluetooth: RFCOMM ver 1.11 [ 1.184554] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.186338] Bluetooth: BNEP filters: protocol multicast [ 1.188111] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.189953] 8021q: 802.1Q VLAN Support v1.8 [ 1.191910] PM: Checking hibernation image partition /dev/sda2 [ 1.309022] ata4: softreset failed (device not ready) [ 1.310741] ata4: applying PMP SRST workaround and retrying [ 1.312429] ata3: softreset failed (device not ready) [ 1.314065] ata3: applying PMP SRST workaround and retrying [ 1.315762] ata1: softreset failed (device not ready) [ 1.317498] ata1: applying PMP SRST workaround and retrying [ 1.319217] ata2: softreset failed (device not ready) [ 1.320928] ata2: applying PMP SRST workaround and retrying [ 1.473036] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.474818] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.476574] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.478232] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100 [ 1.479949] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.481558] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.483860] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.485565] ata4.00: configured for UDMA/100 [ 1.487445] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 1.489196] ata2.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.490948] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.496101] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.497742] ata2.00: configured for UDMA/133 [ 1.499609] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 [ 1.501364] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.503116] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.504975] ata3.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max UDMA/133 [ 1.506724] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.508508] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.510425] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.512150] ata1.00: configured for UDMA/133 [ 1.513976] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.514166] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.514168] ata3.00: configured for UDMA/133 [ 1.519607] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.521549] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 1.521559] sd 0:0:0:0: [sda] Write Protect is off [ 1.521562] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.521578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.527299] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.529178] sd 1:0:0:0: [sdb] Write Protect is off [ 1.529275] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 11.0 PQ: 0 ANSI: 5 [ 1.529521] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.529560] sd 2:0:0:0: [sdc] Write Protect is off [ 1.529562] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.529580] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.530467] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5 [ 1.532395] sr0: scsi3-mmc drive: 8x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.532397] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.532538] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.541566] sda: sda1 sda2 sda3 sda4 [ 1.545999] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.546031] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.546295] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.560610] sdb: sdb1 sdb2 sdb3 sdb4 [ 1.562828] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.597293] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 > [ 1.600228] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.602242] PM: Hibernation image partition 8:2 present [ 1.602244] PM: Looking for hibernation image. [ 1.602378] PM: Image not found (code -22) [ 1.602380] PM: Hibernation image not present or could not be loaded. [ 1.602388] registered taskstats version 1 [ 1.604688] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.606693] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00) [ 1.608823] powernow-k8: fid 0x14 (2800 MHz), vid 0x8 [ 1.610873] powernow-k8: fid 0x12 (2600 MHz), vid 0xa [ 1.612849] powernow-k8: fid 0x10 (2400 MHz), vid 0xc [ 1.614800] powernow-k8: fid 0xe (2200 MHz), vid 0xe [ 1.616810] powernow-k8: fid 0xc (2000 MHz), vid 0x10 [ 1.618809] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 1.620776] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 1.622869] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 1.648118] kjournald starting. Commit interval 5 seconds [ 1.648148] EXT3-fs (sda3): mounted filesystem with writeback data mode [ 1.648165] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 1.654755] Freeing unused kernel memory: 456k freed [ 1.657047] Write protecting the kernel read-only data: 8192k [ 1.662058] Freeing unused kernel memory: 1024k freed [ 1.673039] usb 3-2: new full-speed USB device number 2 using ohci_hcd [ 2.075047] usb 5-1: new low-speed USB device number 2 using ohci_hcd [ 3.986226] udevd[871]: starting version 171 [ 5.003771] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.003859] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.003945] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.004051] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 5.137890] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 5.166303] rtc_cmos 00:03: RTC can wake from S4 [ 5.166425] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 5.166460] rtc0: alarms up to one month, 242 bytes nvram [ 5.227481] atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) [ 5.227511] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later [ 5.227517] ide0: BM-DMA at 0xf900-0xf907 [ 5.227523] Probing IDE interface ide0... [ 5.323772] input: iMON Panel, Knob and Mouse(15c2:ffdc) as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/input/input3 [ 5.330528] IR RC5(x) protocol handler initialized [ 5.345028] imon 5-1:1.0: 0xffdc iMON VFD, MCE IR (id 0x9e) [ 5.356252] IR RC6 protocol handler initialized [ 5.488675] IR MCE Keyboard/mouse protocol handler initialized [ 5.500657] IT8716 SuperIO detected. [ 5.501152] parport_pc 00:09: reported by Plug and Play ACPI [ 5.501198] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 5.514421] lirc_dev: IR Remote Control driver registered, major 252 [ 5.521282] IR LIRC bridge handler initialized [ 5.534033] Registered IR keymap rc-imon-mce [ 5.534336] input: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/rc/rc0/input4 [ 5.534437] rc0: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/rc/rc0 [ 5.545139] imon 5-1:1.0: iMON device (15c2:ffdc, intf0) on usb<5:2> initialized [ 5.545196] usbcore: registered new interface driver imon [ 5.679564] Linux video capture interface: v2.00 [ 5.742627] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 5.742791] saa7133[0]: found at 0000:03:06.0, rev: 209, irq: 21, latency: 64, mmio: 0xfdeff000 [ 5.742807] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] [ 5.742852] saa7133[0]: board init: gpio is 600c000 [ 5.743251] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.743445] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 5.752592] uvcvideo: Unable to create debugfs directory [ 5.773782] usbcore: registered new interface driver snd-usb-audio [ 5.773797] uvcvideo: Found UVC 1.00 device VF0700 Live! Cam Chat HD (041e:4088) [ 5.778989] input: VF0700 Live! Cam Chat HD as /devices/pci0000:00/0000:00:13.5/usb1/1-3/1-3:1.0/input/input5 [ 5.779228] usbcore: registered new interface driver uvcvideo [ 5.779234] USB Video Class driver (1.1.1) [ 5.845168] saa7133[0]: i2c eeprom read error (err=-5) [ 6.030890] hda_codec: ALC883: BIOS auto-probing. [ 6.052822] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 [ 6.053095] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 [ 6.053321] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 6.053550] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [ 6.053785] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 [ 6.055663] snd_hda_intel 0000:01:05.2: irq 42 for MSI/MSI-X [ 6.062440] i2c-core: driver [tuner] using legacy suspend method [ 6.062447] i2c-core: driver [tuner] using legacy resume method [ 6.149032] tuner 5-004b: Tuner -1 found with type(s) Radio TV. [ 6.184028] tda829x 5-004b: setting tuner address to 61 [ 6.435025] tda829x 5-004b: type set to tda8290+75a [ 9.067029] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 9.456159] saa7133[0]: registered device video1 [v4l2] [ 9.456234] saa7133[0]: registered device vbi0 [ 9.456305] saa7133[0]: registered device radio0 [ 9.510095] dvb_init() allocating 1 frontend [ 9.532052] DVB: registering new adapter (saa7133[0]) [ 9.532064] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 9.574037] tda1004x: setting up plls for 48MHz sampling clock [ 9.780038] tda1004x: found firmware revision 0 -- invalid [ 9.780048] tda1004x: trying to boot from eeprom [ 10.068029] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000 [ 11.069045] hda-intel: Codec #0 probe error; disabling it... [ 12.087023] tda1004x: timeout waiting for DSP ready [ 12.097024] tda1004x: found firmware revision 0 -- invalid [ 12.097029] tda1004x: waiting for firmware upload... [ 13.180031] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503 [ 13.185372] hda-codec: No codec parser is available [ 19.706153] EXT3-fs (sda3): using internal journal [ 19.904880] kjournald starting. Commit interval 5 seconds [ 19.905091] EXT3-fs (sda1): using internal journal [ 19.905098] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 19.939997] kjournald starting. Commit interval 5 seconds [ 19.940128] EXT3-fs (dm-2): using internal journal [ 19.940134] EXT3-fs (dm-2): mounted filesystem with writeback data mode [ 20.028599] kjournald starting. Commit interval 5 seconds [ 20.028823] EXT3-fs (dm-3): using internal journal [ 20.028830] EXT3-fs (dm-3): mounted filesystem with writeback data mode [ 20.052466] kjournald starting. Commit interval 5 seconds [ 20.052772] EXT3-fs (dm-4): using internal journal [ 20.052778] EXT3-fs (dm-4): mounted filesystem with writeback data mode [ 20.099494] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 20.223180] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 20.254644] kjournald starting. Commit interval 5 seconds [ 20.254973] EXT3-fs (dm-6): using internal journal [ 20.254980] EXT3-fs (dm-6): mounted filesystem with writeback data mode [ 20.304321] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 20.368320] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) [ 20.477077] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 22.181037] tda1004x: timeout waiting for DSP ready [ 22.191051] tda1004x: found firmware revision 0 -- invalid [ 22.191059] tda1004x: firmware upload failed [ 22.316459] saa7134 ALSA driver for DMA sound loaded [ 22.316521] saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 21 registered as card -1 [ 22.954074] Adding 10490440k swap on /dev/sda2. Priority:-1 extents:1 across:10490440k [ 24.137485] r8169 0000:02:00.0: eth0: link down [ 24.138371] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.636526] ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 25.888644] r8169 0000:02:00.0: eth0: link up [ 25.889461] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.890216] ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 32.921380] input: lircmd as /devices/virtual/input/input11 [ 36.226025] eth0.2: no IPv6 routers present [ 36.810028] eth0: no IPv6 routers present [ 37.025048] input: iMON Panel, Knob and Mouse(15c2:ffdc) (lircd bypass) as /devices/virtual/input/input12 dmesg, patched: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.8-dirty (anders@tv) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #68 SMP PREEMPT Fri Jul 6 19:39:29 CEST 2012 [ 0.000000] Command line: root=/dev/sda3 hpet=disable crashkernel=128M [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ee0000 (usable) [ 0.000000] BIOS-e820: 0000000077ee0000 - 0000000077ee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ee3000 - 0000000077ef0000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077f00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/M2A-VM HDMI, BIOS ASUS M2A-VM HDMI ACPI BIOS Revision 2201 10/22/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x77ee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 base 0077F00000 mask FFFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f6560] f6560 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-0000000077ee0000 [ 0.000000] 0000000000 - 0077e00000 page 2M [ 0.000000] 0077e00000 - 0077ee0000 page 4k [ 0.000000] kernel direct mapping tables up to 77ee0000 @ 1fffc000-20000000 [ 0.000000] Reserving 128MB of memory at 768MB for crashkernel (System RAM: 1918MB) [ 0.000000] ACPI: RSDP 00000000000f8210 00024 (v02 ATI ) [ 0.000000] ACPI: XSDT 0000000077ee3100 00044 (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0000000077ee8500 000F4 (v03 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0000000077ee3280 05210 (v01 ATI ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0000000077ee0000 00040 [ 0.000000] ACPI: SSDT 0000000077ee8740 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 0000000077ee8b00 0003C (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0000000077ee8640 00084 (v01 ATI ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075800000-ffff8800773fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077ee0 [ 0.000000] On node 0 totalpages: 491119 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6661 pages used for memmap [ 0.000000] DMA32 zone: 480475 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 77f00000 (gap: 77f00000:68100000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880077c00000 s71424 r8192 d22784 u524288 [ 0.000000] pcpu-alloc: s71424 r8192 d22784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 484397 [ 0.000000] Kernel command line: root=/dev/sda3 hpet=disable crashkernel=128M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 1066000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1791420k/1964928k available (5100k kernel code, 452k absent, 173056k reserved, 3466k data, 456k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 7864320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2799.805 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.002039] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.61 BogoMIPS (lpj=2799805) [ 0.002110] pid_max: default: 32768 minimum: 301 [ 0.002216] Mount-cache hash table entries: 256 [ 0.003098] Initializing cgroup subsys cpuacct [ 0.003134] Initializing cgroup subsys memory [ 0.003180] Initializing cgroup subsys devices [ 0.003214] Initializing cgroup subsys freezer [ 0.003250] Initializing cgroup subsys blkio [ 0.003313] tseg: 0077f00000 [ 0.003315] CPU: Physical Processor ID: 0 [ 0.003349] CPU: Processor Core ID: 0 [ 0.003384] mce: CPU supports 5 MCE banks [ 0.003427] using AMD E400 aware idle routine [ 0.003490] ACPI: Core revision 20120111 [ 0.006669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.016866] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 [ 0.016998] Performance Events: AMD PMU driver. [ 0.016998] ... version: 0 [ 0.016998] ... bit width: 48 [ 0.016998] ... generic registers: 4 [ 0.016998] ... value mask: 0000ffffffffffff [ 0.016998] ... max period: 00007fffffffffff [ 0.016998] ... fixed-purpose events: 0 [ 0.016998] ... event mask: 000000000000000f [ 0.028011] Booting Node 0, Processors #1 [ 0.028072] smpboot cpu 1: start_ip = 9a000 [ 0.099086] Brought up 2 CPUs [ 0.099121] Total of 2 processors activated (11198.38 BogoMIPS). [ 0.099618] PM: Registering ACPI NVS region at 77ee0000 (12288 bytes) [ 0.100060] NET: Registered protocol family 16 [ 0.100113] node 0 link 0: io port [c000, ffff] [ 0.100113] TOM: 0000000080000000 aka 2048M [ 0.100113] node 0 link 0: mmio [a0000, bffff] [ 0.100113] node 0 link 0: mmio [80000000, dfffffff] [ 0.100113] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.100113] node 0 link 0: mmio [e0000000, e03fffff] [ 0.100113] bus: [00, 03] on node 0 link 0 [ 0.100113] bus: 00 index 0 [io 0x0000-0xffff] [ 0.100113] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.100113] bus: 00 index 2 [mem 0x80000000-0xefffffff] [ 0.100113] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] [ 0.100113] ACPI: bus type pci registered [ 0.100126] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.100126] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.118729] PCI: Using configuration type 1 for base access [ 0.126035] bio: create slab <bio-0> at 0 [ 0.126133] ACPI: Added _OSI(Module Device) [ 0.126133] ACPI: Added _OSI(Processor Device) [ 0.126133] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.126133] ACPI: Added _OSI(Processor Aggregator Device) [ 0.127170] ACPI: EC: Look up EC in DSDT [ 0.130793] ACPI: Interpreter enabled [ 0.130833] ACPI: (supports S0 S1 S3 S4 S5) [ 0.131029] ACPI: Using IOAPIC for interrupt routing [ 0.136087] ACPI: No dock devices found. [ 0.136126] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.136218] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.136323] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.136359] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.136395] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.136435] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.136474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.137057] PCI host bridge to bus 0000:00 [ 0.137057] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.137073] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.137109] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.137144] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.137180] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.137224] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.137249] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 [ 0.137285] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604 [ 0.137314] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.137344] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.137362] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07] [ 0.137373] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03] [ 0.137383] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07] [ 0.137393] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03] [ 0.137403] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f] [ 0.137414] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.137435] pci 0000:00:12.0: set SATA to AHCI mode [ 0.137508] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.137523] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.137590] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.137605] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.137673] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.137687] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.137755] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.137769] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.137840] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.137854] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.138006] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.138026] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.138113] pci 0000:00:13.5: supports D1 D2 [ 0.138115] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.138140] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.138163] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.138250] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.138264] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.138274] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.138285] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.138295] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.138306] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f] [ 0.138346] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.138369] pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff 64bit] [ 0.138438] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.138455] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.138533] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.138581] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.138598] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.138612] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.138628] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.138669] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300 [ 0.138678] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.138684] pci 0000:01:05.0: reg 18: [mem 0xfdbe0000-0xfdbeffff 64bit] [ 0.138689] pci 0000:01:05.0: reg 20: [io 0xde00-0xdeff] [ 0.138693] pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff] [ 0.138708] pci 0000:01:05.0: supports D1 D2 [ 0.138718] pci 0000:01:05.2: [1002:7919] type 0 class 0x000403 [ 0.138726] pci 0000:01:05.2: reg 10: [mem 0xfdbfc000-0xfdbfffff 64bit] [ 0.138762] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.138799] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.138802] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.138806] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.138845] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.138860] pci 0000:02:00.0: reg 10: [io 0xee00-0xeeff] [ 0.138884] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit] [ 0.138912] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.138973] pci 0000:02:00.0: supports D1 D2 [ 0.138975] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.139017] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.139064] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.139100] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.139103] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.139107] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.139142] pci 0000:03:06.0: [1131:7133] type 0 class 0x000480 [ 0.139165] pci 0000:03:06.0: reg 10: [mem 0xfdeff000-0xfdeff7ff] [ 0.139266] pci 0000:03:06.0: supports D1 D2 [ 0.139289] pci 0000:03:07.0: [1106:3044] type 0 class 0x000c00 [ 0.139313] pci 0000:03:07.0: reg 10: [mem 0xfdefe000-0xfdefe7ff] [ 0.139326] pci 0000:03:07.0: reg 14: [io 0xcf00-0xcf7f] [ 0.139422] pci 0000:03:07.0: supports D2 [ 0.139424] pci 0000:03:07.0: PME# supported from D2 D3hot D3cold [ 0.139473] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.139511] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.139516] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.139521] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.139523] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.139526] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.139529] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.139532] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.139534] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.139546] pci_bus 0000:00: on NUMA node 0 [ 0.139548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.139698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.139769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.139796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.139825] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.139861] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.139901] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.154036] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.154429] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.154820] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.155318] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.155709] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.156112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.156504] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) [ 0.156833] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.157228] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.157228] vgaarb: loaded [ 0.157228] vgaarb: bridge control possible 0000:01:05.0 [ 0.157228] SCSI subsystem initialized [ 0.157228] libata version 3.00 loaded. [ 0.157228] usbcore: registered new interface driver usbfs [ 0.157997] usbcore: registered new interface driver hub [ 0.158037] usbcore: registered new device driver usb [ 0.158049] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.158049] PCI: Using ACPI for IRQ routing [ 0.167425] PCI: pci_cache_line_size set to 64 bytes [ 0.167512] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.167514] reserve RAM buffer: 0000000077ee0000 - 0000000077ffffff [ 0.167533] Bluetooth: Core ver 2.16 [ 0.167533] NET: Registered protocol family 31 [ 0.167533] Bluetooth: HCI device and connection manager initialized [ 0.167533] Bluetooth: HCI socket layer initialized [ 0.167533] Bluetooth: L2CAP socket layer initialized [ 0.169985] Bluetooth: SCO socket layer initialized [ 0.170997] pnp: PnP ACPI init [ 0.170997] ACPI: bus type pnp registered [ 0.171109] pnp 00:00: [bus 00-ff] [ 0.171111] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.171114] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.171116] pnp 00:00: [io 0x0d00-0xffff window] [ 0.171119] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.171121] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.171124] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.171181] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.171181] pnp 00:01: [io 0x4100-0x411f] [ 0.171181] pnp 00:01: [io 0x0228-0x022f] [ 0.171181] pnp 00:01: [io 0x040b] [ 0.171181] pnp 00:01: [io 0x04d6] [ 0.171181] pnp 00:01: [io 0x0c00-0x0c01] [ 0.171181] pnp 00:01: [io 0x0c14] [ 0.171181] pnp 00:01: [io 0x0c50-0x0c52] [ 0.171181] pnp 00:01: [io 0x0c6c-0x0c6d] [ 0.171181] pnp 00:01: [io 0x0c6f] [ 0.171181] pnp 00:01: [io 0x0cd0-0x0cd1] [ 0.171181] pnp 00:01: [io 0x0cd2-0x0cd3] [ 0.171181] pnp 00:01: [io 0x0cd4-0x0cdf] [ 0.171181] pnp 00:01: [io 0x4000-0x40fe] [ 0.171181] pnp 00:01: [io 0x4210-0x4217] [ 0.171181] pnp 00:01: [io 0x0b10-0x0b1f] [ 0.171181] pnp 00:01: [mem 0x00000000-0x00000fff window] [ 0.171181] pnp 00:01: [mem 0xfee00400-0xfee00fff window] [ 0.171181] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.171203] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.171203] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.171203] system 00:01: [io 0x040b] has been reserved [ 0.171203] system 00:01: [io 0x04d6] has been reserved [ 0.171203] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.171203] system 00:01: [io 0x0c14] has been reserved [ 0.171219] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.171256] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.171291] system 00:01: [io 0x0c6f] has been reserved [ 0.171327] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.171363] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.171399] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.171434] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.171470] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.171506] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.171993] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.172033] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.172125] pnp 00:02: [dma 4] [ 0.172127] pnp 00:02: [io 0x0000-0x000f] [ 0.172130] pnp 00:02: [io 0x0080-0x0090] [ 0.172132] pnp 00:02: [io 0x0094-0x009f] [ 0.172134] pnp 00:02: [io 0x00c0-0x00df] [ 0.172171] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.172171] pnp 00:03: [io 0x0070-0x0073] [ 0.172171] pnp 00:03: [irq 8] [ 0.172171] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.172171] pnp 00:04: [io 0x0061] [ 0.172171] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.172171] pnp 00:05: [io 0x00f0-0x00ff] [ 0.172171] pnp 00:05: [irq 13] [ 0.172171] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.172171] pnp 00:06: [io 0x0010-0x001f] [ 0.172171] pnp 00:06: [io 0x0022-0x003f] [ 0.172171] pnp 00:06: [io 0x0044-0x005f] [ 0.172171] pnp 00:06: [io 0x0062-0x0063] [ 0.172171] pnp 00:06: [io 0x0065-0x006f] [ 0.172171] pnp 00:06: [io 0x0074-0x007f] [ 0.172171] pnp 00:06: [io 0x0091-0x0093] [ 0.172171] pnp 00:06: [io 0x00a2-0x00bf] [ 0.172171] pnp 00:06: [io 0x00e0-0x00ef] [ 0.172171] pnp 00:06: [io 0x04d0-0x04d1] [ 0.172171] pnp 00:06: [io 0x0220-0x0225] [ 0.172171] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.172171] system 00:06: [io 0x0220-0x0225] has been reserved [ 0.172171] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.172198] pnp 00:07: [io 0x03f0-0x03f5] [ 0.172200] pnp 00:07: [io 0x03f7] [ 0.172208] pnp 00:07: [irq 6] [ 0.172210] pnp 00:07: [dma 2] [ 0.172259] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.173030] pnp 00:08: [io 0x03f8-0x03ff] [ 0.173038] pnp 00:08: [irq 4] [ 0.173103] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.173256] pnp 00:09: [io 0x0378-0x037f] [ 0.173264] pnp 00:09: [irq 7] [ 0.173321] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.173321] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.173321] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.173321] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.173321] pnp 00:0b: [mem 0x000cd600-0x000cffff] [ 0.173321] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.173321] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.173321] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.173321] pnp 00:0b: [mem 0x77ef0000-0x77feffff] [ 0.173321] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.173321] pnp 00:0b: [mem 0x77ee0000-0x77efffff] [ 0.173321] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.173321] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.173321] pnp 00:0b: [mem 0x00100000-0x77edffff] [ 0.173321] pnp 00:0b: [mem 0x77ff0000-0x7ffeffff] [ 0.173321] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.173321] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.173321] pnp 00:0b: [mem 0xfff80000-0xfffeffff] [ 0.174001] system 00:0b: [mem 0x000cd600-0x000cffff] has been reserved [ 0.174001] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.174030] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.174066] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.174103] system 00:0b: [mem 0x77ef0000-0x77feffff] could not be reserved [ 0.174140] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.174176] system 00:0b: [mem 0x77ee0000-0x77efffff] could not be reserved [ 0.174212] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.174248] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.174285] system 00:0b: [mem 0x00100000-0x77edffff] could not be reserved [ 0.174321] system 00:0b: [mem 0x77ff0000-0x7ffeffff] could not be reserved [ 0.174357] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.174393] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.174430] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.174466] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.174474] pnp: PnP ACPI: found 12 devices [ 0.174508] ACPI: ACPI bus type pnp unregistered [ 0.182882] Switching to clocksource acpi_pm [ 0.182959] PCI: max bus depth: 1 pci_try_num: 2 [ 0.182979] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.182979] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.182979] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.182979] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.182979] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.182979] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.182979] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.182979] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.182979] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.182979] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.182979] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.182979] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.182979] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.182979] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.182979] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.182979] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.182979] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.182979] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff] [ 0.182979] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.182979] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff] [ 0.182979] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.182979] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.182979] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.182979] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.182979] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.182979] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.182979] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref] [ 0.182979] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.182979] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.182979] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.182979] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.182979] pci_bus 0000:03: resource 8 [mem 0x80000000-0xfebfffff] [ 0.182979] NET: Registered protocol family 2 [ 0.182979] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.183272] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.185158] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.185689] TCP: Hash tables configured (established 262144 bind 65536) [ 0.185727] TCP reno registered [ 0.185763] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.185816] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.185961] NET: Registered protocol family 1 [ 0.186147] RPC: Registered named UNIX socket transport module. [ 0.186193] RPC: Registered udp transport module. [ 0.186227] RPC: Registered tcp transport module. [ 0.186262] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.463080] pci 0000:01:05.0: Boot video device [ 0.463092] PCI: CLS 32 bytes, default 64 [ 0.463220] kvm: Nested Virtualization enabled [ 0.464180] audit: initializing netlink socket (disabled) [ 0.464227] type=2000 audit(1347732948.463:1): initialized [ 0.465327] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.465646] msgmni has been set to 3498 [ 0.466119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.466162] io scheduler noop registered [ 0.466220] io scheduler cfq registered (default) [ 0.466402] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X [ 0.467042] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.467085] ACPI: Power Button [PWRB] [ 0.467222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.467262] ACPI: Power Button [PWRF] [ 0.467426] ACPI: Fan [FAN] (on) [ 0.469041] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20120111/nspredef-463) [ 0.469143] ACPI: [Package] has zero elements (ffff880074b409c0) [ 0.469178] ACPI: Invalid passive threshold [ 0.469443] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.469479] ACPI: Thermal Zone [THRM] (40 C) [ 0.469742] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.490475] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.511604] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.512070] [drm] Initialized drm 1.1.0 20060810 [ 0.512162] [drm] radeon defaulting to kernel modesetting. [ 0.512198] [drm] radeon kernel modesetting enabled. [ 0.512484] [drm] initializing kernel modesetting (RS690 0x1002:0x791E 0x1043:0x826D). [ 0.512538] [drm] register mmio base: 0xFDBE0000 [ 0.512572] [drm] register mmio size: 65536 [ 0.514171] ATOM BIOS: ATI [ 0.514224] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) [ 0.514264] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 0.514306] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.514342] [drm] Driver supports precise vblank timestamp query. [ 0.514403] [drm] radeon: irq initialized. [ 0.515085] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.515124] [drm] RAM width 128bits DDR [ 0.515235] [TTM] Zone kernel: Available graphics memory: 895710 kiB. [ 0.515275] [TTM] Initializing pool allocator. [ 0.515313] [TTM] Initializing DMA pool allocator. [ 0.515381] [drm] radeon: 128M of VRAM memory ready [ 0.515417] [drm] radeon: 512M of GTT memory ready. [ 0.515454] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.522330] [drm] radeon: ib pool ready. [ 0.523376] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 0.529478] [drm] PCIE GART of 512M enabled (table at 0x0000000074680000). [ 0.529532] radeon 0000:01:05.0: WB enabled [ 0.529568] [drm] fence driver on ring 0 use gpu addr 0x80000000 and cpu addr 0xffff880074b46000 [ 0.529724] [drm] Loading RS690/RS740 Microcode [ 0.529940] [drm] radeon: ring at 0x0000000080001000 [ 0.529989] [drm] ring test succeeded in 1 usecs [ 0.530147] [drm] ib test succeeded in 0 usecs [ 0.530935] [drm] Radeon Display Connectors [ 0.530970] [drm] Connector 0: [ 0.531013] [drm] VGA [ 0.531047] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 0.531085] [drm] Encoders: [ 0.531119] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.531153] [drm] Connector 1: [ 0.531186] [drm] S-video [ 0.531219] [drm] Encoders: [ 0.531252] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 0.531286] [drm] Connector 2: [ 0.531319] [drm] HDMI-A [ 0.531352] [drm] HPD2 [ 0.531386] [drm] DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c [ 0.531424] [drm] Encoders: [ 0.531457] [drm] DFP2: INTERNAL_DDI [ 0.531490] [drm] Connector 3: [ 0.531524] [drm] DVI-D [ 0.531558] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 0.531596] [drm] Encoders: [ 0.531629] [drm] DFP3: INTERNAL_LVTM1 [ 0.788229] [drm] fb mappable at 0xF0040000 [ 0.788263] [drm] vram apper at 0xF0000000 [ 0.788297] [drm] size 8294400 [ 0.788330] [drm] fb depth is 24 [ 0.788364] [drm] pitch is 7680 [ 0.788487] fbcon: radeondrmfb (fb0) is primary device [ 0.816877] Console: switching to colour frame buffer device 240x67 [ 0.826222] fb0: radeondrmfb frame buffer device [ 0.826256] drm: registered panic notifier [ 0.826291] [drm] Initialized radeon 2.13.0 20080528 for 0000:01:05.0 on minor 0 [ 0.829192] brd: module loaded [ 0.830680] loop: module loaded [ 0.830760] Uniform Multi-Platform E-IDE driver [ 0.830928] ide-gd driver 1.18 [ 0.831250] ahci 0000:00:12.0: version 3.0 [ 0.831301] ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA [ 0.831468] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.831531] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.833190] scsi0 : ahci [ 0.833520] scsi1 : ahci [ 0.833748] scsi2 : ahci [ 0.833973] scsi3 : ahci [ 0.834237] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.834296] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.834354] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.834411] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.834699] tun: Universal TUN/TAP device driver, 1.6 [ 0.834738] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.834874] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.835051] r8169 0000:02:00.0: irq 41 for MSI/MSI-X [ 0.835336] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000000c000, 00:1b:fc:89:fa:a2, XID 18000000 IRQ 41 [ 0.835415] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 0.835551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.835624] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.835670] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.835748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.835818] ehci_hcd 0000:00:13.5: debug port 1 [ 0.835882] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 0.841024] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 0.841320] hub 1-0:1.0: USB hub found [ 0.841351] hub 1-0:1.0: 10 ports detected [ 0.841536] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.841607] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.841649] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.841737] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 0.896251] hub 2-0:1.0: USB hub found [ 0.896291] hub 2-0:1.0: 2 ports detected [ 0.896439] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.896486] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.896580] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 0.951252] hub 3-0:1.0: USB hub found [ 0.953016] hub 3-0:1.0: 2 ports detected [ 0.954833] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 0.956599] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.958385] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 1.015230] hub 4-0:1.0: USB hub found [ 1.016980] hub 4-0:1.0: 2 ports detected [ 1.018802] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.020562] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.022370] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.079228] hub 5-0:1.0: USB hub found [ 1.080897] hub 5-0:1.0: 2 ports detected [ 1.082725] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.084501] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.086279] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.143032] usb 1-3: new high-speed USB device number 2 using ehci_hcd [ 1.143185] hub 6-0:1.0: USB hub found [ 1.143191] hub 6-0:1.0: 2 ports detected [ 1.143437] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.150211] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.152106] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.154048] mousedev: PS/2 mouse device common for all mice [ 1.156117] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 1.158076] md: linear personality registered for level -1 [ 1.159986] device-mapper: uevent: version 1.0.3 [ 1.161805] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.163693] usbcore: registered new interface driver btusb [ 1.165442] cpuidle: using governor ladder [ 1.167252] cpuidle: using governor menu [ 1.169525] ALSA device list: [ 1.171312] No soundcards found. [ 1.173092] TCP cubic registered [ 1.174949] NET: Registered protocol family 10 [ 1.176904] NET: Registered protocol family 17 [ 1.178629] Bridge firewalling registered [ 1.180410] Bluetooth: RFCOMM TTY layer initialized [ 1.182144] Bluetooth: RFCOMM socket layer initialized [ 1.183937] Bluetooth: RFCOMM ver 1.11 [ 1.185721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.187521] Bluetooth: BNEP filters: protocol multicast [ 1.189319] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.191179] 8021q: 802.1Q VLAN Support v1.8 [ 1.193154] PM: Checking hibernation image partition /dev/sda2 [ 1.294030] ata1: softreset failed (device not ready) [ 1.295711] ata1: applying PMP SRST workaround and retrying [ 1.297355] ata3: softreset failed (device not ready) [ 1.299075] ata3: applying PMP SRST workaround and retrying [ 1.300850] ata4: softreset failed (device not ready) [ 1.302563] ata4: applying PMP SRST workaround and retrying [ 1.304269] ata2: softreset failed (device not ready) [ 1.305988] ata2: applying PMP SRST workaround and retrying [ 1.458035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.459802] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.461490] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.463265] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.464860] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100 [ 1.466559] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.468262] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 [ 1.469961] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.471668] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.473555] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 1.475331] ata2.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.477072] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.478752] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.480460] ata4.00: configured for UDMA/100 [ 1.482198] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.483912] ata1.00: configured for UDMA/133 [ 1.485770] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.485983] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.485986] ata2.00: configured for UDMA/133 [ 1.491337] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.492329] ata3.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max UDMA/133 [ 1.492331] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.492335] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.493287] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.493290] ata3.00: configured for UDMA/133 [ 1.496102] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 1.496315] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.496355] sd 1:0:0:0: [sdb] Write Protect is off [ 1.496358] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.496374] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.506240] sdb: sdb1 sdb2 sdb3 sdb4 [ 1.511092] sd 0:0:0:0: [sda] Write Protect is off [ 1.511124] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 11.0 PQ: 0 ANSI: 5 [ 1.511419] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.511456] sd 2:0:0:0: [sdc] Write Protect is off [ 1.511458] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.511474] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.520249] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.520285] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.520638] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.524200] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5 [ 1.528046] sr0: scsi3-mmc drive: 8x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.529903] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.530825] sda: sda1 sda2 sda3 sda4 [ 1.533742] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.534035] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.596783] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 > [ 1.599583] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.601542] PM: Hibernation image partition 8:2 present [ 1.601544] PM: Looking for hibernation image. [ 1.601676] PM: Image not found (code -22) [ 1.601678] PM: Hibernation image not present or could not be loaded. [ 1.601687] registered taskstats version 1 [ 1.603907] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.605848] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00) [ 1.607910] powernow-k8: fid 0x14 (2800 MHz), vid 0x8 [ 1.609904] powernow-k8: fid 0x12 (2600 MHz), vid 0xa [ 1.611836] powernow-k8: fid 0x10 (2400 MHz), vid 0xc [ 1.613752] powernow-k8: fid 0xe (2200 MHz), vid 0xe [ 1.615692] powernow-k8: fid 0xc (2000 MHz), vid 0x10 [ 1.617646] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 1.619578] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 1.621622] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 1.645665] kjournald starting. Commit interval 5 seconds [ 1.645699] EXT3-fs (sda3): mounted filesystem with writeback data mode [ 1.645715] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 1.652041] Freeing unused kernel memory: 456k freed [ 1.654290] Write protecting the kernel read-only data: 8192k [ 1.659253] Freeing unused kernel memory: 1024k freed [ 1.669040] usb 3-2: new full-speed USB device number 2 using ohci_hcd [ 2.072042] usb 5-1: new low-speed USB device number 2 using ohci_hcd [ 3.979588] udevd[872]: starting version 171 [ 5.070436] atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) [ 5.070502] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later [ 5.070520] ide0: BM-DMA at 0xf900-0xf907 [ 5.070534] Probing IDE interface ide0... [ 5.195189] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 5.223764] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.223850] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.223928] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.224032] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 5.237442] input: iMON Panel, Knob and Mouse(15c2:ffdc) as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/input/input3 [ 5.257039] imon 5-1:1.0: 0xffdc iMON VFD, MCE IR (id 0x9e) [ 5.308271] IT8716 SuperIO detected. [ 5.309299] parport_pc 00:09: reported by Plug and Play ACPI [ 5.309344] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 5.348300] IR RC5(x) protocol handler initialized [ 5.391188] rtc_cmos 00:03: RTC can wake from S4 [ 5.391501] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 5.391554] rtc0: alarms up to one month, 242 bytes nvram [ 5.404400] Linux video capture interface: v2.00 [ 5.406857] IR RC6 protocol handler initialized [ 5.429034] Registered IR keymap rc-imon-mce [ 5.429339] input: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/rc/rc0/input4 [ 5.429441] rc0: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/rc/rc0 [ 5.441151] imon 5-1:1.0: iMON device (15c2:ffdc, intf0) on usb<5:2> initialized [ 5.441212] usbcore: registered new interface driver imon [ 5.445549] uvcvideo: Unable to create debugfs directory [ 5.583247] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.583447] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 5.587445] IR MCE Keyboard/mouse protocol handler initialized [ 5.612856] lirc_dev: IR Remote Control driver registered, major 61 [ 5.617640] ir_lirc_codec: disagrees about version of symbol lirc_dev_fop_poll [ 5.617648] ir_lirc_codec: Unknown symbol lirc_dev_fop_poll (err -22) [ 5.617664] ir_lirc_codec: disagrees about version of symbol lirc_dev_fop_open [ 5.617671] ir_lirc_codec: Unknown symbol lirc_dev_fop_open (err -22) [ 5.617683] ir_lirc_codec: disagrees about version of symbol lirc_get_pdata [ 5.617689] ir_lirc_codec: Unknown symbol lirc_get_pdata (err -22) [ 5.617703] ir_lirc_codec: disagrees about version of symbol lirc_dev_fop_close [ 5.617709] ir_lirc_codec: Unknown symbol lirc_dev_fop_close (err -22) [ 5.617720] ir_lirc_codec: disagrees about version of symbol lirc_dev_fop_read [ 5.617726] ir_lirc_codec: Unknown symbol lirc_dev_fop_read (err -22) [ 5.617734] ir_lirc_codec: disagrees about version of symbol lirc_register_driver [ 5.617740] ir_lirc_codec: Unknown symbol lirc_register_driver (err -22) [ 5.617769] ir_lirc_codec: disagrees about version of symbol lirc_dev_fop_ioctl [ 5.617775] ir_lirc_codec: Unknown symbol lirc_dev_fop_ioctl (err -22) [ 5.678523] hda_codec: ALC883: BIOS auto-probing. [ 5.701422] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5 [ 5.701660] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 [ 5.701870] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 [ 5.702100] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 5.702345] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [ 5.704117] snd_hda_intel 0000:01:05.2: irq 42 for MSI/MSI-X [ 5.733517] usbcore: registered new interface driver snd-usb-audio [ 5.733529] uvcvideo: Found UVC 1.00 device VF0700 Live! Cam Chat HD (041e:4088) [ 5.735727] input: VF0700 Live! Cam Chat HD as /devices/pci0000:00/0000:00:13.5/usb1/1-3/1-3:1.0/input/input10 [ 5.735866] usbcore: registered new interface driver uvcvideo [ 5.735871] USB Video Class driver (1.1.1) [ 5.758334] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 5.758498] saa7133[0]: found at 0000:03:06.0, rev: 209, irq: 21, latency: 64, mmio: 0xfdeff000 [ 5.758514] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] [ 5.758569] saa7133[0]: board init: gpio is 600c000 [ 5.861175] saa7133[0]: i2c eeprom read error (err=-5) [ 6.063369] i2c-core: driver [tuner] using legacy suspend method [ 6.063382] i2c-core: driver [tuner] using legacy resume method [ 6.487041] tuner 5-004b: Tuner -1 found with type(s) Radio TV. [ 6.523079] tda829x 5-004b: setting tuner address to 61 [ 6.565254] tda829x 5-004b: ANDERS: setting switch_addr. was 0x00, new 0x4b [ 6.565265] tda829x 5-004b: ANDERS: new 0x61 [ 6.571031] tda829x 5-004b: type set to tda8290+75a [ 8.715040] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 9.568135] saa7133[0]: registered device video1 [v4l2] [ 9.568213] saa7133[0]: registered device vbi0 [ 9.568285] saa7133[0]: registered device radio0 [ 9.597534] dvb_init() allocating 1 frontend [ 9.615047] DVB: registering new adapter (saa7133[0]) [ 9.615060] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 9.667056] tda1004x: setting up plls for 48MHz sampling clock [ 9.716022] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000 [ 10.717036] hda-intel: Codec #0 probe error; disabling it... [ 11.851032] tda1004x: timeout waiting for DSP ready [ 11.861026] tda1004x: found firmware revision 0 -- invalid [ 11.861032] tda1004x: trying to boot from eeprom [ 12.828031] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503 [ 12.833029] hda-codec: No codec parser is available [ 14.169029] tda1004x: timeout waiting for DSP ready [ 14.179024] tda1004x: found firmware revision 0 -- invalid [ 14.179047] tda1004x: waiting for firmware upload... [ 24.195035] tda1004x: timeout waiting for DSP ready [ 24.205025] tda1004x: found firmware revision 0 -- invalid [ 24.205031] tda1004x: firmware upload failed [ 24.327099] saa7134 ALSA driver for DMA sound loaded [ 24.327166] saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 21 registered as card -1 [ 86.067258] EXT3-fs (sda3): using internal journal [ 86.282706] kjournald starting. Commit interval 5 seconds [ 86.283033] EXT3-fs (sda1): using internal journal [ 86.283057] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 86.317804] kjournald starting. Commit interval 5 seconds [ 86.318048] EXT3-fs (dm-2): using internal journal [ 86.318055] EXT3-fs (dm-2): mounted filesystem with writeback data mode [ 86.414727] kjournald starting. Commit interval 5 seconds [ 86.415075] EXT3-fs (dm-3): using internal journal [ 86.415082] EXT3-fs (dm-3): mounted filesystem with writeback data mode [ 86.439344] kjournald starting. Commit interval 5 seconds [ 86.439857] EXT3-fs (dm-4): using internal journal [ 86.439864] EXT3-fs (dm-4): mounted filesystem with writeback data mode [ 86.502842] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 86.664276] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 86.719547] kjournald starting. Commit interval 5 seconds [ 86.719916] EXT3-fs (dm-6): using internal journal [ 86.719924] EXT3-fs (dm-6): mounted filesystem with writeback data mode [ 86.745408] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 86.805303] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) [ 86.892045] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 89.622234] Adding 10490440k swap on /dev/sda2. Priority:-1 extents:1 across:10490440k [ 90.770896] r8169 0000:02:00.0: eth0: link down [ 90.771780] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 91.263841] ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 92.469649] r8169 0000:02:00.0: eth0: link up [ 92.470545] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 92.471305] ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 99.765095] input: lircmd as /devices/virtual/input/input11 [ 102.962022] eth0: no IPv6 routers present [ 102.962033] eth0.2: no IPv6 routers present [ 103.857743] input: iMON Panel, Knob and Mouse(15c2:ffdc) (lircd bypass) as /devices/virtual/input/input12 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 064d14c..498cc7b 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -635,7 +635,11 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) dvb_attach(tda827x_attach, fe, priv->tda827x_addr, priv->i2c_props.adap, &priv->cfg); + tuner_info("ANDERS: setting switch_addr. was 0x%02x, new 0x%02x\n",priv->cfg.switch_addr,priv->i2c_props.addr); priv->cfg.switch_addr = priv->i2c_props.addr; + priv->cfg.switch_addr = 0xc2 / 2; + tuner_info("ANDERS: new 0x%02x\n",priv->cfg.switch_addr); + } if (fe->ops.tuner_ops.init)
Hi, Ever since 2.6.26 or so (where there was a code reorg) I had to carry this patch. Without it the received signal is noisy, and the card worked fine prior to the code reorg. This patch is a hack, mostly as a result of my inability to follow the code paths (and bisect failing). I'd be more than willing to test whatever the proper patch might be prior to any mainlining. Thanks, /Anders $ cat /TV_CARD.diff fe->ops.tuner_ops.init(fe); -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html