| Message ID | 20120915153502.21241.13218.stgit@ubuntu (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Sep 15, 2012 at 04:35:02PM +0100, Christoffer Dall wrote: > From: Rusty Russell <rusty.russell@linaro.org> > > We want some of these for use in KVM, so pull them out of > arch/arm/kernel/perf_event_v7.c into their own asm/perf_bits.h. > > Signed-off-by: Rusty Russell <rusty.russell@linaro.org> > Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> > --- > arch/arm/include/asm/perf_bits.h | 56 ++++++++++++++++++++++++++++++++++++++ > arch/arm/kernel/perf_event_v7.c | 51 +---------------------------------- > 2 files changed, 57 insertions(+), 50 deletions(-) > create mode 100644 arch/arm/include/asm/perf_bits.h I don't like this I'm afraid. These bit definitions, although useful for kvm, are only applicable to ARMv7 PMUs. Perf does a reasonable job of separating the low-level CPU-specific code and adding the v7 definitions into their own global header feels like a step backwards. I also want to move a load of this into drivers/ at some point and this won't help with that effort. Is KVM just using this for world switch? If so, why does it care about the bit definitions (and what do you do for things like debug regs)? Is there anything I could add to perf that you could call instead? Will -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 18, 2012 at 9:08 AM, Will Deacon <will.deacon@arm.com> wrote: > On Sat, Sep 15, 2012 at 04:35:02PM +0100, Christoffer Dall wrote: >> From: Rusty Russell <rusty.russell@linaro.org> >> >> We want some of these for use in KVM, so pull them out of >> arch/arm/kernel/perf_event_v7.c into their own asm/perf_bits.h. >> >> Signed-off-by: Rusty Russell <rusty.russell@linaro.org> >> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> >> --- >> arch/arm/include/asm/perf_bits.h | 56 ++++++++++++++++++++++++++++++++++++++ >> arch/arm/kernel/perf_event_v7.c | 51 +---------------------------------- >> 2 files changed, 57 insertions(+), 50 deletions(-) >> create mode 100644 arch/arm/include/asm/perf_bits.h > > I don't like this I'm afraid. These bit definitions, although useful for > kvm, are only applicable to ARMv7 PMUs. Perf does a reasonable job of > separating the low-level CPU-specific code and adding the v7 definitions > into their own global header feels like a step backwards. I also want to > move a load of this into drivers/ at some point and this won't help with > that effort. > > Is KVM just using this for world switch? If so, why does it care about the > bit definitions (and what do you do for things like debug regs)? Is there > anything I could add to perf that you could call instead? > I'm going to let Rusty reply to this one... -Christoffer -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Will Deacon <will.deacon@arm.com> writes: > On Sat, Sep 15, 2012 at 04:35:02PM +0100, Christoffer Dall wrote: >> From: Rusty Russell <rusty.russell@linaro.org> >> >> We want some of these for use in KVM, so pull them out of >> arch/arm/kernel/perf_event_v7.c into their own asm/perf_bits.h. >> >> Signed-off-by: Rusty Russell <rusty.russell@linaro.org> >> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> >> --- >> arch/arm/include/asm/perf_bits.h | 56 ++++++++++++++++++++++++++++++++++++++ >> arch/arm/kernel/perf_event_v7.c | 51 +---------------------------------- >> 2 files changed, 57 insertions(+), 50 deletions(-) >> create mode 100644 arch/arm/include/asm/perf_bits.h > > I don't like this I'm afraid. These bit definitions, although useful for > kvm, are only applicable to ARMv7 PMUs. Perf does a reasonable job of > separating the low-level CPU-specific code and adding the v7 definitions > into their own global header feels like a step backwards. I also want to > move a load of this into drivers/ at some point and this won't help with > that effort. > > Is KVM just using this for world switch? If so, why does it care about the > bit definitions (and what do you do for things like debug regs)? Is there > anything I could add to perf that you could call instead? No, we need these definitions if we ever want to actually implement PMU for the guest.[1] But we don't do this yet, so you can defer this patch until then if you want. Cheers, Rusty. [1] Which we should do, since you NAKed the patch which would allow the guest to detect that we don't have a PMU, insisting that "all A15s have a PMU", despite the fact that we don't. I assume this means you're busy implementing it right now :) -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Sep 19, 2012 at 05:09:34AM +0100, Rusty Russell wrote: > Will Deacon <will.deacon@arm.com> writes: > > On Sat, Sep 15, 2012 at 04:35:02PM +0100, Christoffer Dall wrote: > >> From: Rusty Russell <rusty.russell@linaro.org> > >> > >> We want some of these for use in KVM, so pull them out of > >> arch/arm/kernel/perf_event_v7.c into their own asm/perf_bits.h. > >> > >> Signed-off-by: Rusty Russell <rusty.russell@linaro.org> > >> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> > >> --- > >> arch/arm/include/asm/perf_bits.h | 56 ++++++++++++++++++++++++++++++++++++++ > >> arch/arm/kernel/perf_event_v7.c | 51 +---------------------------------- > >> 2 files changed, 57 insertions(+), 50 deletions(-) > >> create mode 100644 arch/arm/include/asm/perf_bits.h > > > > I don't like this I'm afraid. These bit definitions, although useful for > > kvm, are only applicable to ARMv7 PMUs. Perf does a reasonable job of > > separating the low-level CPU-specific code and adding the v7 definitions > > into their own global header feels like a step backwards. I also want to > > move a load of this into drivers/ at some point and this won't help with > > that effort. > > > > Is KVM just using this for world switch? If so, why does it care about the > > bit definitions (and what do you do for things like debug regs)? Is there > > anything I could add to perf that you could call instead? > > No, we need these definitions if we ever want to actually implement > PMU for the guest.[1] > > But we don't do this yet, so you can defer this patch until then if you > want. Ok, let's postpone the pain for the moment. > [1] Which we should do, since you NAKed the patch which would allow the > guest to detect that we don't have a PMU, insisting that "all A15s have > a PMU", despite the fact that we don't. I assume this means you're > busy implementing it right now :) Yeah, right! Happy to add hooks to perf if you need them though, rather than expose the raw bit definitions. Will -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/include/asm/perf_bits.h b/arch/arm/include/asm/perf_bits.h new file mode 100644 index 0000000..eeb266a --- /dev/null +++ b/arch/arm/include/asm/perf_bits.h @@ -0,0 +1,56 @@ +#ifndef __ARM_PERF_BITS_H__ +#define __ARM_PERF_BITS_H__ + +/* + * ARMv7 low level PMNC access + */ + +/* + * Per-CPU PMNC: config reg + */ +#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ +#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ +#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ +#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ +#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ +#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ +#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ +#define ARMV7_PMNC_N_MASK 0x1f +#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ + +/* + * FLAG: counters overflow flag status reg + */ +#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ +#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK + +/* + * PMXEVTYPER: Event selection reg + */ +#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */ +#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */ + +/* + * Event filters for PMUv2 + */ +#define ARMV7_EXCLUDE_PL1 (1 << 31) +#define ARMV7_EXCLUDE_USER (1 << 30) +#define ARMV7_INCLUDE_HYP (1 << 27) + +#ifndef __ASSEMBLY__ +static inline u32 armv7_pmnc_read(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); + return val; +} + +static inline void armv7_pmnc_write(u32 val) +{ + val &= ARMV7_PMNC_MASK; + isb(); + asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); +} +#endif + +#endif /* __ARM_PERF_BITS_H__ */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index f04070b..09851b3 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -17,6 +17,7 @@ */ #ifdef CONFIG_CPU_V7 +#include <asm/perf_bits.h> static struct arm_pmu armv7pmu; @@ -744,61 +745,11 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] #define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1) /* - * ARMv7 low level PMNC access - */ - -/* * Perf Event to low level counters mapping */ #define ARMV7_IDX_TO_COUNTER(x) \ (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK) -/* - * Per-CPU PMNC: config reg - */ -#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ -#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ -#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ -#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ -#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ -#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ -#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ -#define ARMV7_PMNC_N_MASK 0x1f -#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ - -/* - * FLAG: counters overflow flag status reg - */ -#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ -#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK - -/* - * PMXEVTYPER: Event selection reg - */ -#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */ -#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */ - -/* - * Event filters for PMUv2 - */ -#define ARMV7_EXCLUDE_PL1 (1 << 31) -#define ARMV7_EXCLUDE_USER (1 << 30) -#define ARMV7_INCLUDE_HYP (1 << 27) - -static inline u32 armv7_pmnc_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); - return val; -} - -static inline void armv7_pmnc_write(u32 val) -{ - val &= ARMV7_PMNC_MASK; - isb(); - asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); -} - static inline int armv7_pmnc_has_overflowed(u32 pmnc) { return pmnc & ARMV7_OVERFLOWED_MASK;