| Message ID | 1348070666-9153-3-git-send-email-ryan.harkin@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 2012-09-19 at 17:04 +0100, Ryan Harkin wrote: > Add support for device tree in the amba-clcd PL111 video driver. > > Special case support is added for the A9 CoreTile which uses the "legacy" > address map and has a PL111 device on-board. The default case is to configure > the device on the motherboard. > > Oscillator support is added for the A9 CoreTile's CLCD driver. > > Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> > --- > arch/arm/mach-vexpress/v2m.c | 58 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 58 insertions(+) > > diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c > index 37608f2..799e00e 100644 > --- a/arch/arm/mach-vexpress/v2m.c > +++ b/arch/arm/mach-vexpress/v2m.c > @@ -3,6 +3,7 @@ > */ > #include <linux/device.h> > #include <linux/amba/bus.h> > +#include <linux/amba/clcd.h> > #include <linux/amba/mmci.h> > #include <linux/io.h> > #include <linux/init.h> > @@ -37,6 +38,7 @@ > #include <mach/ct-ca9x4.h> > #include <mach/motherboard.h> > > +#include <plat/clcd.h> > #include <plat/sched_clock.h> > > #include "core.h" > @@ -541,6 +543,54 @@ MACHINE_END > > #if defined(CONFIG_ARCH_VEXPRESS_DT) > > +static struct v2m_osc v2m_dt_clcd_osc = { > + .rate_min = 10000000, > + .rate_max = 165000000, > + .rate_default = 23750000, > +}; > + > +static int v2m_dt_clcd_init(void) > +{ > + struct device_node *node; > + u32 osc; > + u32 clcd_site; > + u32 dvimode; > + const __be32 *prop; > + int len, na, ns; > + phys_addr_t reg_base; > + > + node = of_find_compatible_node(NULL, NULL, "arm,pl111"); > + if (!node) > + return -ENODEV; > + > + na = of_n_addr_cells(node); > + ns = of_n_size_cells(node); > + > + prop = of_get_property(node, "reg", &len); > + if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop))) > + return -EINVAL; > + reg_base = of_read_number(prop, na); > + > + switch (reg_base) { > + case CT_CA9X4_CLCDC: > + clcd_site = v2m_get_master_site(); > + dvimode = 2; > + break; > + default: > + clcd_site = SYS_CFG_SITE_MB; > + dvimode = 0; > + break; > + } > + > + if (of_property_read_u32(node, "arm,vexpress-osc", &osc) != 0) > + return -EINVAL; > + v2m_dt_clcd_osc.site = clcd_site; > + v2m_dt_clcd_osc.osc = osc; > + v2m_cfg_write(SYS_CFG_MUXFPGA | clcd_site, clcd_site); > + v2m_cfg_write(SYS_CFG_DVIMODE | clcd_site, dvimode); > + return 0; > +} > + > static struct map_desc v2m_rs1_io_desc __initdata = { > .virtual = V2M_PERIPH, > .pfn = __phys_to_pfn(0x1c000000), > @@ -598,6 +648,8 @@ void __init v2m_dt_init_early(void) > pr_warning("vexpress: DT HBI (%x) is not matching " > "hardware (%x)!\n", dt_hbi, hbi); > } > + > + v2m_dt_clcd_init(); > } > > static struct of_device_id vexpress_irq_match[] __initdata = { > @@ -631,6 +683,12 @@ static void __init v2m_dt_timer_init(void) > > if (arch_timer_sched_clock_init() != 0) > versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); > + > + if (v2m_dt_clcd_osc.site) { > + /* core tile clcd controller for A9 */ > + clk = v2m_osc_register("10020000.clcd", &v2m_dt_clcd_osc); > + clk_register_clkdev(clk, NULL, "10020000.clcd"); > + } > } > > static struct sys_timer v2m_dt_timer = { When (if ;-) the changes I proposed recently make their way into mainline, all this stuff will not be necessary - both clocking and display control are sorted there. Pawel -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 37608f2..799e00e 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -3,6 +3,7 @@ */ #include <linux/device.h> #include <linux/amba/bus.h> +#include <linux/amba/clcd.h> #include <linux/amba/mmci.h> #include <linux/io.h> #include <linux/init.h> @@ -37,6 +38,7 @@ #include <mach/ct-ca9x4.h> #include <mach/motherboard.h> +#include <plat/clcd.h> #include <plat/sched_clock.h> #include "core.h" @@ -541,6 +543,54 @@ MACHINE_END #if defined(CONFIG_ARCH_VEXPRESS_DT) +static struct v2m_osc v2m_dt_clcd_osc = { + .rate_min = 10000000, + .rate_max = 165000000, + .rate_default = 23750000, +}; + +static int v2m_dt_clcd_init(void) +{ + struct device_node *node; + u32 osc; + u32 clcd_site; + u32 dvimode; + const __be32 *prop; + int len, na, ns; + phys_addr_t reg_base; + + node = of_find_compatible_node(NULL, NULL, "arm,pl111"); + if (!node) + return -ENODEV; + + na = of_n_addr_cells(node); + ns = of_n_size_cells(node); + + prop = of_get_property(node, "reg", &len); + if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop))) + return -EINVAL; + reg_base = of_read_number(prop, na); + + switch (reg_base) { + case CT_CA9X4_CLCDC: + clcd_site = v2m_get_master_site(); + dvimode = 2; + break; + default: + clcd_site = SYS_CFG_SITE_MB; + dvimode = 0; + break; + } + + if (of_property_read_u32(node, "arm,vexpress-osc", &osc) != 0) + return -EINVAL; + v2m_dt_clcd_osc.site = clcd_site; + v2m_dt_clcd_osc.osc = osc; + v2m_cfg_write(SYS_CFG_MUXFPGA | clcd_site, clcd_site); + v2m_cfg_write(SYS_CFG_DVIMODE | clcd_site, dvimode); + return 0; +} + static struct map_desc v2m_rs1_io_desc __initdata = { .virtual = V2M_PERIPH, .pfn = __phys_to_pfn(0x1c000000), @@ -598,6 +648,8 @@ void __init v2m_dt_init_early(void) pr_warning("vexpress: DT HBI (%x) is not matching " "hardware (%x)!\n", dt_hbi, hbi); } + + v2m_dt_clcd_init(); } static struct of_device_id vexpress_irq_match[] __initdata = { @@ -631,6 +683,12 @@ static void __init v2m_dt_timer_init(void) if (arch_timer_sched_clock_init() != 0) versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); + + if (v2m_dt_clcd_osc.site) { + /* core tile clcd controller for A9 */ + clk = v2m_osc_register("10020000.clcd", &v2m_dt_clcd_osc); + clk_register_clkdev(clk, NULL, "10020000.clcd"); + } } static struct sys_timer v2m_dt_timer = {
Add support for device tree in the amba-clcd PL111 video driver. Special case support is added for the A9 CoreTile which uses the "legacy" address map and has a PL111 device on-board. The default case is to configure the device on the motherboard. Oscillator support is added for the A9 CoreTile's CLCD driver. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> --- arch/arm/mach-vexpress/v2m.c | 58 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)