| Message ID | 1347958332-2205-8-git-send-email-j-pihet@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Tue, Sep 18, 2012 at 10:52:11AM +0200, Jean Pihet wrote: > Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat > API to the new PM QoS API. > Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY > class of PM QoS. The resulting MPU constraints are used by cpuidle to > decide the next power state of the MPU subsystem. > > The I2C device latency timing is derived from the FIFO size and the > clock speed and so is applicable to all OMAP SoCs. > > Signed-off-by: Jean Pihet <j-pihet@ti.com> this needs to be rebased on top of Wolfram's i2c-next branch which has a big series of patches on top of the i2c driver. Also, please keep Shubhro in Cc for any i2c and spi patches ;-) > --- > arch/arm/plat-omap/i2c.c | 21 --------------------- > drivers/i2c/busses/i2c-omap.c | 28 +++++++++++++++++----------- > include/linux/i2c-omap.h | 1 - > 3 files changed, 17 insertions(+), 33 deletions(-) > > diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c > index db071bc..dba8338 100644 > --- a/arch/arm/plat-omap/i2c.c > +++ b/arch/arm/plat-omap/i2c.c > @@ -26,7 +26,6 @@ > #include <linux/kernel.h> > #include <linux/platform_device.h> > #include <linux/i2c.h> > -#include <linux/i2c-omap.h> > #include <linux/slab.h> > #include <linux/err.h> > #include <linux/clk.h> > @@ -34,7 +33,6 @@ > #include <mach/irqs.h> > #include <plat/mux.h> > #include <plat/i2c.h> > -#include <plat/omap-pm.h> > #include <plat/omap_device.h> > > #define OMAP_I2C_SIZE 0x3f > @@ -129,16 +127,6 @@ static inline int omap1_i2c_add_bus(int bus_id) > > > #ifdef CONFIG_ARCH_OMAP2PLUS > -/* > - * XXX This function is a temporary compatibility wrapper - only > - * needed until the I2C driver can be converted to call > - * omap_pm_set_max_dev_wakeup_lat() and handle a return code. > - */ > -static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) > -{ > - omap_pm_set_max_mpu_wakeup_lat(dev, t); > -} > - > static inline int omap2_i2c_add_bus(int bus_id) > { > int l; > @@ -170,15 +158,6 @@ static inline int omap2_i2c_add_bus(int bus_id) > dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; > pdata->flags = dev_attr->flags; > > - /* > - * When waiting for completion of a i2c transfer, we need to > - * set a wake up latency constraint for the MPU. This is to > - * ensure quick enough wakeup from idle, when transfer > - * completes. > - * Only omap3 has support for constraints > - */ > - if (cpu_is_omap34xx()) > - pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; > pdev = omap_device_build(name, bus_id, oh, pdata, > sizeof(struct omap_i2c_bus_platform_data), > NULL, 0, 0); > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > index 5d19a49..bd45cee 100644 > --- a/drivers/i2c/busses/i2c-omap.c > +++ b/drivers/i2c/busses/i2c-omap.c > @@ -43,6 +43,7 @@ > #include <linux/slab.h> > #include <linux/i2c-omap.h> > #include <linux/pm_runtime.h> > +#include <linux/pm_qos.h> > > /* I2C controller revisions */ > #define OMAP_I2C_OMAP1_REV_2 0x20 > @@ -183,8 +184,7 @@ struct omap_i2c_dev { > struct completion cmd_complete; > struct resource *ioarea; > u32 latency; /* maximum mpu wkup latency */ > - void (*set_mpu_wkup_lat)(struct device *dev, > - long latency); > + struct pm_qos_request pm_qos_request; > u32 speed; /* Speed of bus in kHz */ > u32 dtrev; /* extra revision from DT */ > u32 flags; > @@ -590,8 +590,16 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > if (r < 0) > goto out; > > - if (dev->set_mpu_wkup_lat != NULL) > - dev->set_mpu_wkup_lat(dev->dev, dev->latency); > + /* > + * When waiting for completion of a i2c transfer, we need to > + * set a wake up latency constraint for the MPU. This is to > + * ensure quick enough wakeup from idle, when transfer > + * completes. > + */ > + if (dev->latency) > + pm_qos_add_request(&dev->pm_qos_request, > + PM_QOS_CPU_DMA_LATENCY, > + dev->latency); > > for (i = 0; i < num; i++) { > r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); > @@ -599,8 +607,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > break; > } > > - if (dev->set_mpu_wkup_lat != NULL) > - dev->set_mpu_wkup_lat(dev->dev, -1); > + if (dev->latency) > + pm_qos_remove_request(&dev->pm_qos_request); > > if (r == 0) > r = num; > @@ -989,7 +997,6 @@ omap_i2c_probe(struct platform_device *pdev) > } else if (pdata != NULL) { > dev->speed = pdata->clkrate; > dev->flags = pdata->flags; > - dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; > dev->dtrev = pdata->rev; > } > > @@ -1046,10 +1053,9 @@ omap_i2c_probe(struct platform_device *pdev) > else > dev->b_hw = 1; /* Enable hardware fixes */ > > - /* calculate wakeup latency constraint for MPU */ > - if (dev->set_mpu_wkup_lat != NULL) > - dev->latency = (1000000 * dev->fifo_size) / > - (1000 * dev->speed / 8); > + /* calculate wakeup latency constraint */ > + dev->latency = (1000000 * dev->fifo_size) / > + (1000 * dev->speed / 8); > } > > /* reset ASAP, clearing any IRQs */ > diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h > index 92a0dc7..df804ba 100644 > --- a/include/linux/i2c-omap.h > +++ b/include/linux/i2c-omap.h > @@ -34,7 +34,6 @@ struct omap_i2c_bus_platform_data { > u32 clkrate; > u32 rev; > u32 flags; > - void (*set_mpu_wkup_lat)(struct device *dev, long set); > }; > > #endif > -- > 1.7.7.6 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tuesday 18 September 2012 02:22 PM, Jean Pihet wrote: > Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat > API to the new PM QoS API. > Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY > class of PM QoS. The resulting MPU constraints are used by cpuidle to > decide the next power state of the MPU subsystem. > > The I2C device latency timing is derived from the FIFO size and the > clock speed and so is applicable to all OMAP SoCs. agree thanks, > > Signed-off-by: Jean Pihet <j-pihet@ti.com> > --- > arch/arm/plat-omap/i2c.c | 21 --------------------- > drivers/i2c/busses/i2c-omap.c | 28 +++++++++++++++++----------- > include/linux/i2c-omap.h | 1 - > 3 files changed, 17 insertions(+), 33 deletions(-) > > diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c > index db071bc..dba8338 100644 > --- a/arch/arm/plat-omap/i2c.c > +++ b/arch/arm/plat-omap/i2c.c > @@ -26,7 +26,6 @@ > #include <linux/kernel.h> > #include <linux/platform_device.h> > #include <linux/i2c.h> > -#include <linux/i2c-omap.h> > #include <linux/slab.h> > #include <linux/err.h> > #include <linux/clk.h> > @@ -34,7 +33,6 @@ > #include <mach/irqs.h> > #include <plat/mux.h> > #include <plat/i2c.h> > -#include <plat/omap-pm.h> > #include <plat/omap_device.h> > > #define OMAP_I2C_SIZE 0x3f > @@ -129,16 +127,6 @@ static inline int omap1_i2c_add_bus(int bus_id) > > > #ifdef CONFIG_ARCH_OMAP2PLUS > -/* > - * XXX This function is a temporary compatibility wrapper - only > - * needed until the I2C driver can be converted to call > - * omap_pm_set_max_dev_wakeup_lat() and handle a return code. > - */ > -static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) > -{ > - omap_pm_set_max_mpu_wakeup_lat(dev, t); > -} > - > static inline int omap2_i2c_add_bus(int bus_id) > { > int l; > @@ -170,15 +158,6 @@ static inline int omap2_i2c_add_bus(int bus_id) > dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; > pdata->flags = dev_attr->flags; > > - /* > - * When waiting for completion of a i2c transfer, we need to > - * set a wake up latency constraint for the MPU. This is to > - * ensure quick enough wakeup from idle, when transfer > - * completes. > - * Only omap3 has support for constraints > - */ > - if (cpu_is_omap34xx()) > - pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; > pdev = omap_device_build(name, bus_id, oh, pdata, > sizeof(struct omap_i2c_bus_platform_data), > NULL, 0, 0); > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > index 5d19a49..bd45cee 100644 > --- a/drivers/i2c/busses/i2c-omap.c > +++ b/drivers/i2c/busses/i2c-omap.c > @@ -43,6 +43,7 @@ > #include <linux/slab.h> > #include <linux/i2c-omap.h> > #include <linux/pm_runtime.h> > +#include <linux/pm_qos.h> > > /* I2C controller revisions */ > #define OMAP_I2C_OMAP1_REV_2 0x20 > @@ -183,8 +184,7 @@ struct omap_i2c_dev { > struct completion cmd_complete; > struct resource *ioarea; > u32 latency; /* maximum mpu wkup latency */ > - void (*set_mpu_wkup_lat)(struct device *dev, > - long latency); > + struct pm_qos_request pm_qos_request; > u32 speed; /* Speed of bus in kHz */ > u32 dtrev; /* extra revision from DT */ > u32 flags; > @@ -590,8 +590,16 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > if (r < 0) > goto out; > > - if (dev->set_mpu_wkup_lat != NULL) > - dev->set_mpu_wkup_lat(dev->dev, dev->latency); > + /* > + * When waiting for completion of a i2c transfer, we need to > + * set a wake up latency constraint for the MPU. This is to > + * ensure quick enough wakeup from idle, when transfer > + * completes. > + */ > + if (dev->latency) > + pm_qos_add_request(&dev->pm_qos_request, > + PM_QOS_CPU_DMA_LATENCY, > + dev->latency); > > for (i = 0; i < num; i++) { > r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); > @@ -599,8 +607,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > break; > } > > - if (dev->set_mpu_wkup_lat != NULL) > - dev->set_mpu_wkup_lat(dev->dev, -1); > + if (dev->latency) > + pm_qos_remove_request(&dev->pm_qos_request); > > if (r == 0) > r = num; > @@ -989,7 +997,6 @@ omap_i2c_probe(struct platform_device *pdev) > } else if (pdata != NULL) { > dev->speed = pdata->clkrate; > dev->flags = pdata->flags; > - dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; > dev->dtrev = pdata->rev; > } > > @@ -1046,10 +1053,9 @@ omap_i2c_probe(struct platform_device *pdev) > else > dev->b_hw = 1; /* Enable hardware fixes */ > > - /* calculate wakeup latency constraint for MPU */ > - if (dev->set_mpu_wkup_lat != NULL) > - dev->latency = (1000000 * dev->fifo_size) / > - (1000 * dev->speed / 8); > + /* calculate wakeup latency constraint */ > + dev->latency = (1000000 * dev->fifo_size) / > + (1000 * dev->speed / 8); > } > > /* reset ASAP, clearing any IRQs */ > diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h > index 92a0dc7..df804ba 100644 > --- a/include/linux/i2c-omap.h > +++ b/include/linux/i2c-omap.h > @@ -34,7 +34,6 @@ struct omap_i2c_bus_platform_data { > u32 clkrate; > u32 rev; > u32 flags; > - void (*set_mpu_wkup_lat)(struct device *dev, long set); > }; > > #endif
Hi! On Wed, Sep 19, 2012 at 8:11 PM, Shubhrajyoti <shubhrajyoti@ti.com> wrote: > On Tuesday 18 September 2012 02:22 PM, Jean Pihet wrote: >> Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat >> API to the new PM QoS API. >> Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY >> class of PM QoS. The resulting MPU constraints are used by cpuidle to >> decide the next power state of the MPU subsystem. >> >> The I2C device latency timing is derived from the FIFO size and the >> clock speed and so is applicable to all OMAP SoCs. > agree > thanks, The I2C patch will be rebased and submitted separately. Thanks! Jean >> >> Signed-off-by: Jean Pihet <j-pihet@ti.com> >> --- >> arch/arm/plat-omap/i2c.c | 21 --------------------- >> drivers/i2c/busses/i2c-omap.c | 28 +++++++++++++++++----------- >> include/linux/i2c-omap.h | 1 - >> 3 files changed, 17 insertions(+), 33 deletions(-) >> >> diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c >> index db071bc..dba8338 100644 >> --- a/arch/arm/plat-omap/i2c.c >> +++ b/arch/arm/plat-omap/i2c.c >> @@ -26,7 +26,6 @@ >> #include <linux/kernel.h> >> #include <linux/platform_device.h> >> #include <linux/i2c.h> >> -#include <linux/i2c-omap.h> >> #include <linux/slab.h> >> #include <linux/err.h> >> #include <linux/clk.h> >> @@ -34,7 +33,6 @@ >> #include <mach/irqs.h> >> #include <plat/mux.h> >> #include <plat/i2c.h> >> -#include <plat/omap-pm.h> >> #include <plat/omap_device.h> >> >> #define OMAP_I2C_SIZE 0x3f >> @@ -129,16 +127,6 @@ static inline int omap1_i2c_add_bus(int bus_id) >> >> >> #ifdef CONFIG_ARCH_OMAP2PLUS >> -/* >> - * XXX This function is a temporary compatibility wrapper - only >> - * needed until the I2C driver can be converted to call >> - * omap_pm_set_max_dev_wakeup_lat() and handle a return code. >> - */ >> -static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) >> -{ >> - omap_pm_set_max_mpu_wakeup_lat(dev, t); >> -} >> - >> static inline int omap2_i2c_add_bus(int bus_id) >> { >> int l; >> @@ -170,15 +158,6 @@ static inline int omap2_i2c_add_bus(int bus_id) >> dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; >> pdata->flags = dev_attr->flags; >> >> - /* >> - * When waiting for completion of a i2c transfer, we need to >> - * set a wake up latency constraint for the MPU. This is to >> - * ensure quick enough wakeup from idle, when transfer >> - * completes. >> - * Only omap3 has support for constraints >> - */ >> - if (cpu_is_omap34xx()) >> - pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; >> pdev = omap_device_build(name, bus_id, oh, pdata, >> sizeof(struct omap_i2c_bus_platform_data), >> NULL, 0, 0); >> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c >> index 5d19a49..bd45cee 100644 >> --- a/drivers/i2c/busses/i2c-omap.c >> +++ b/drivers/i2c/busses/i2c-omap.c >> @@ -43,6 +43,7 @@ >> #include <linux/slab.h> >> #include <linux/i2c-omap.h> >> #include <linux/pm_runtime.h> >> +#include <linux/pm_qos.h> >> >> /* I2C controller revisions */ >> #define OMAP_I2C_OMAP1_REV_2 0x20 >> @@ -183,8 +184,7 @@ struct omap_i2c_dev { >> struct completion cmd_complete; >> struct resource *ioarea; >> u32 latency; /* maximum mpu wkup latency */ >> - void (*set_mpu_wkup_lat)(struct device *dev, >> - long latency); >> + struct pm_qos_request pm_qos_request; >> u32 speed; /* Speed of bus in kHz */ >> u32 dtrev; /* extra revision from DT */ >> u32 flags; >> @@ -590,8 +590,16 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) >> if (r < 0) >> goto out; >> >> - if (dev->set_mpu_wkup_lat != NULL) >> - dev->set_mpu_wkup_lat(dev->dev, dev->latency); >> + /* >> + * When waiting for completion of a i2c transfer, we need to >> + * set a wake up latency constraint for the MPU. This is to >> + * ensure quick enough wakeup from idle, when transfer >> + * completes. >> + */ >> + if (dev->latency) >> + pm_qos_add_request(&dev->pm_qos_request, >> + PM_QOS_CPU_DMA_LATENCY, >> + dev->latency); >> >> for (i = 0; i < num; i++) { >> r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); >> @@ -599,8 +607,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) >> break; >> } >> >> - if (dev->set_mpu_wkup_lat != NULL) >> - dev->set_mpu_wkup_lat(dev->dev, -1); >> + if (dev->latency) >> + pm_qos_remove_request(&dev->pm_qos_request); >> >> if (r == 0) >> r = num; >> @@ -989,7 +997,6 @@ omap_i2c_probe(struct platform_device *pdev) >> } else if (pdata != NULL) { >> dev->speed = pdata->clkrate; >> dev->flags = pdata->flags; >> - dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; >> dev->dtrev = pdata->rev; >> } >> >> @@ -1046,10 +1053,9 @@ omap_i2c_probe(struct platform_device *pdev) >> else >> dev->b_hw = 1; /* Enable hardware fixes */ >> >> - /* calculate wakeup latency constraint for MPU */ >> - if (dev->set_mpu_wkup_lat != NULL) >> - dev->latency = (1000000 * dev->fifo_size) / >> - (1000 * dev->speed / 8); >> + /* calculate wakeup latency constraint */ >> + dev->latency = (1000000 * dev->fifo_size) / >> + (1000 * dev->speed / 8); >> } >> >> /* reset ASAP, clearing any IRQs */ >> diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h >> index 92a0dc7..df804ba 100644 >> --- a/include/linux/i2c-omap.h >> +++ b/include/linux/i2c-omap.h >> @@ -34,7 +34,6 @@ struct omap_i2c_bus_platform_data { >> u32 clkrate; >> u32 rev; >> u32 flags; >> - void (*set_mpu_wkup_lat)(struct device *dev, long set); >> }; >> >> #endif >
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index db071bc..dba8338 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,7 +26,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/i2c-omap.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> @@ -34,7 +33,6 @@ #include <mach/irqs.h> #include <plat/mux.h> #include <plat/i2c.h> -#include <plat/omap-pm.h> #include <plat/omap_device.h> #define OMAP_I2C_SIZE 0x3f @@ -129,16 +127,6 @@ static inline int omap1_i2c_add_bus(int bus_id) #ifdef CONFIG_ARCH_OMAP2PLUS -/* - * XXX This function is a temporary compatibility wrapper - only - * needed until the I2C driver can be converted to call - * omap_pm_set_max_dev_wakeup_lat() and handle a return code. - */ -static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) -{ - omap_pm_set_max_mpu_wakeup_lat(dev, t); -} - static inline int omap2_i2c_add_bus(int bus_id) { int l; @@ -170,15 +158,6 @@ static inline int omap2_i2c_add_bus(int bus_id) dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; pdata->flags = dev_attr->flags; - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - * Only omap3 has support for constraints - */ - if (cpu_is_omap34xx()) - pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), NULL, 0, 0); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 5d19a49..bd45cee 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -43,6 +43,7 @@ #include <linux/slab.h> #include <linux/i2c-omap.h> #include <linux/pm_runtime.h> +#include <linux/pm_qos.h> /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -183,8 +184,7 @@ struct omap_i2c_dev { struct completion cmd_complete; struct resource *ioarea; u32 latency; /* maximum mpu wkup latency */ - void (*set_mpu_wkup_lat)(struct device *dev, - long latency); + struct pm_qos_request pm_qos_request; u32 speed; /* Speed of bus in kHz */ u32 dtrev; /* extra revision from DT */ u32 flags; @@ -590,8 +590,16 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (r < 0) goto out; - if (dev->set_mpu_wkup_lat != NULL) - dev->set_mpu_wkup_lat(dev->dev, dev->latency); + /* + * When waiting for completion of a i2c transfer, we need to + * set a wake up latency constraint for the MPU. This is to + * ensure quick enough wakeup from idle, when transfer + * completes. + */ + if (dev->latency) + pm_qos_add_request(&dev->pm_qos_request, + PM_QOS_CPU_DMA_LATENCY, + dev->latency); for (i = 0; i < num; i++) { r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); @@ -599,8 +607,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) break; } - if (dev->set_mpu_wkup_lat != NULL) - dev->set_mpu_wkup_lat(dev->dev, -1); + if (dev->latency) + pm_qos_remove_request(&dev->pm_qos_request); if (r == 0) r = num; @@ -989,7 +997,6 @@ omap_i2c_probe(struct platform_device *pdev) } else if (pdata != NULL) { dev->speed = pdata->clkrate; dev->flags = pdata->flags; - dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; dev->dtrev = pdata->rev; } @@ -1046,10 +1053,9 @@ omap_i2c_probe(struct platform_device *pdev) else dev->b_hw = 1; /* Enable hardware fixes */ - /* calculate wakeup latency constraint for MPU */ - if (dev->set_mpu_wkup_lat != NULL) - dev->latency = (1000000 * dev->fifo_size) / - (1000 * dev->speed / 8); + /* calculate wakeup latency constraint */ + dev->latency = (1000000 * dev->fifo_size) / + (1000 * dev->speed / 8); } /* reset ASAP, clearing any IRQs */ diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h index 92a0dc7..df804ba 100644 --- a/include/linux/i2c-omap.h +++ b/include/linux/i2c-omap.h @@ -34,7 +34,6 @@ struct omap_i2c_bus_platform_data { u32 clkrate; u32 rev; u32 flags; - void (*set_mpu_wkup_lat)(struct device *dev, long set); }; #endif
Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat API to the new PM QoS API. Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY class of PM QoS. The resulting MPU constraints are used by cpuidle to decide the next power state of the MPU subsystem. The I2C device latency timing is derived from the FIFO size and the clock speed and so is applicable to all OMAP SoCs. Signed-off-by: Jean Pihet <j-pihet@ti.com> --- arch/arm/plat-omap/i2c.c | 21 --------------------- drivers/i2c/busses/i2c-omap.c | 28 +++++++++++++++++----------- include/linux/i2c-omap.h | 1 - 3 files changed, 17 insertions(+), 33 deletions(-)