diff mbox

[RFC,00/13] DMA Engine support for AM33xx

Message ID 1BAFE6F6C881BF42822005164F1491C33EA8FDA9@DBDE01.ent.ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hebbar, Gururaja Sept. 26, 2012, 8:26 a.m. UTC
On Fri, Sep 21, 2012 at 23:52:11, Porter, Matt wrote:
> On Fri, Sep 21, 2012 at 08:27:07AM +0000, Hebbar, Gururaja wrote:

> > On Thu, Sep 20, 2012 at 20:13:33, Porter, Matt wrote:

> > > This series adds DMA Engine support for AM33xx, which uses

> > > an EDMA DMAC. The EDMA DMAC has been previously supported by only

> > > a private API implementation (much like the situation with OMAP

> > > DMA) found on the DaVinci family of SoCs.

> > > 

> > > There are a mind-boggling number of dependencies for this series:

> > > 

> > > 	- Jon Hunter's OF DMA helpers series

> > > 	  https://patchwork.kernel.org/patch/1461061/

> > > 	  https://patchwork.kernel.org/patch/1461051/

> > > 	- Patch to address OF DMA helpers naming issues:

> > > 	  https://patchwork.kernel.org/patch/1477921/

> > > 	- EDMA DMA Engine wrapper driver in linux-next

> > > 	  c2dde5f8f2095d7c623ff3565c1462e190272273

> > > 	- EDMA DMA Engine wrapper driver bug fix:

> > > 	  https://patchwork.kernel.org/patch/1474411/  

> > > 	- A huge number of patches in linux-next for AM33xx boot

> > > 	  (too numerous to list)

> > > 

> > > The approach taken is similar to how OMAP DMA is being converted to

> > > DMA Engine support. With the functional EDMA private API already

> > > existing in mach-davinci/dma.c, we first move that to an ARM common

> > > area so it can be shared. Adding DT and runtime PM support to the

> > > private EDMA API implementation allows it to run on AM33xx. AM33xx

> > > *only* boots using DT so we leverage Jon's generic DT DMA helpers to

> > > register EDMA DMAC with the of_dma framework and then add support

> > > for calling the dma_request_slave_channel() API to both the mmc

> > > and spi drivers.

> > > 

> > > What works? Well, with this series we now have MMC and SPI support

> > > on AM33xx. The only caveat for MMC is that the mmc3 controller has

> > > its events on the crossbar and is not usable right now.

> > > 

> > > This is tested on BeagleBone with a SPI framebuffer driver and SD

> > > card.

> > > 

> > > After this series, the plan is to convert the last in-tree user

> > > of the private EDMA API (davinci-pcm/mcasp) and then eliminate

> > > the private EDMA API by folding its functionality into

> > > drivers/dma/edma.c.

> > > 

> > > TODO:

> > > 	add AM33xx crossbar support to the private EDMA API

> > > 	(any EDMA events on the crossbar are not supported)

> > > 

> > 

> > 

> > Can you please mention the base repo you have taken as starting point.

> > (repo + extra patches ...).

> 

> It's mainline 3.6-rc6 and you can see the complete set of patches

> at https://github.com/ohporter/linux/tree/edma-dmaengine-am33xx-rfc-v1

> after commit 5698bd757d55b1bb87edd1a9744ab09c142abfc2

> 

> > This will help us to test the code.

> > 

> > This is because I looked at the patch 12/13 and I see that mmc

> > device-node is modified. But in mainline I don’t see device 

> > node for mmc (yet).

> 

> Oops. You'll need e62a3333ae450bcdefbe22229d7bc277ae0ef645 and

> fe97304557d2c6f7d0aaf1ea028ea48ffca366a9 which I forgot to include

> in this series. I'll have them in for v2.


Yesterday I tested edma patches on latest linux-next/master + merge of 
linux-omap/for_3.7/dts_part2. Below are my observations

1. baseline = linux-next/master + merge of linux-omap/for_3.7/dts_part2
2. on top of above branch, I applied patches [1-9]/13 of your edma 
   patches
3. few patches required trivial changes before applying
4. Applied dma of patches as you mentioned
5. add custom patch (ARM: CUSTOM: Build a uImage with dtb already 
   appended)
   From https://github.com/hvaibhav/am335x-linux/commit/
        7e72f5ed4b702c9373d19f7626f07ae31a381d53#arch/arm/Makefile

6. Modified 9/13 patch to apply properly on latest am33xx.dtsi.
	a. Edma portion as it is
	b. mmc portion as below
		mmc1: mmc@48060000 {
			compatible = "ti,omap3-hsmmc";
			ti,hwmods = "mmc1";
			ti,dual-volt;
			ti,needs-special-reset;
			bus-width = <4>;
			vmmc-supply = <&vmmc_reg>;
			dmas = <&edma 24
				&edma 25>;
			dma-names = "tx", "rx";
		};
	c. added mmc pinmux as-well

7. make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm distclean
   make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm 
   omap2plus_defconfig

8. enabled TI_EDMA from menuconfig (since it was not enabled for 
   omap2plus_defconfig

9. make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm uImage
   make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm 
   uImage-dtb.am335x-evm

With above changes, edma probe was failing at request_mem_region() 
Inside linux-next/arch/arm/common/edma.c --> edma_probe()

I had to modify edma_probe as below




With this I was able to boot on am335x-evm and do a successful MMC 
copy-md5sum-compare test.

I believe you are looking into above issue in your v2 version.

> 

> -Matt

> 


...snip...
...snip...
...snip...


Regards, 
Gururaja

Comments

Matt Porter Sept. 26, 2012, 1:01 p.m. UTC | #1
On Wed, Sep 26, 2012 at 08:26:19AM +0000, Hebbar, Gururaja wrote:
> On Fri, Sep 21, 2012 at 23:52:11, Porter, Matt wrote:
> > On Fri, Sep 21, 2012 at 08:27:07AM +0000, Hebbar, Gururaja wrote:
> > > On Thu, Sep 20, 2012 at 20:13:33, Porter, Matt wrote:
> > > > This series adds DMA Engine support for AM33xx, which uses
> > > > an EDMA DMAC. The EDMA DMAC has been previously supported by only
> > > > a private API implementation (much like the situation with OMAP
> > > > DMA) found on the DaVinci family of SoCs.
> > > > 
> > > > There are a mind-boggling number of dependencies for this series:
> > > > 
> > > > 	- Jon Hunter's OF DMA helpers series
> > > > 	  https://patchwork.kernel.org/patch/1461061/
> > > > 	  https://patchwork.kernel.org/patch/1461051/
> > > > 	- Patch to address OF DMA helpers naming issues:
> > > > 	  https://patchwork.kernel.org/patch/1477921/
> > > > 	- EDMA DMA Engine wrapper driver in linux-next
> > > > 	  c2dde5f8f2095d7c623ff3565c1462e190272273
> > > > 	- EDMA DMA Engine wrapper driver bug fix:
> > > > 	  https://patchwork.kernel.org/patch/1474411/  
> > > > 	- A huge number of patches in linux-next for AM33xx boot
> > > > 	  (too numerous to list)
> > > > 
> > > > The approach taken is similar to how OMAP DMA is being converted to
> > > > DMA Engine support. With the functional EDMA private API already
> > > > existing in mach-davinci/dma.c, we first move that to an ARM common
> > > > area so it can be shared. Adding DT and runtime PM support to the
> > > > private EDMA API implementation allows it to run on AM33xx. AM33xx
> > > > *only* boots using DT so we leverage Jon's generic DT DMA helpers to
> > > > register EDMA DMAC with the of_dma framework and then add support
> > > > for calling the dma_request_slave_channel() API to both the mmc
> > > > and spi drivers.
> > > > 
> > > > What works? Well, with this series we now have MMC and SPI support
> > > > on AM33xx. The only caveat for MMC is that the mmc3 controller has
> > > > its events on the crossbar and is not usable right now.
> > > > 
> > > > This is tested on BeagleBone with a SPI framebuffer driver and SD
> > > > card.
> > > > 
> > > > After this series, the plan is to convert the last in-tree user
> > > > of the private EDMA API (davinci-pcm/mcasp) and then eliminate
> > > > the private EDMA API by folding its functionality into
> > > > drivers/dma/edma.c.
> > > > 
> > > > TODO:
> > > > 	add AM33xx crossbar support to the private EDMA API
> > > > 	(any EDMA events on the crossbar are not supported)
> > > > 
> > > 
> > > 
> > > Can you please mention the base repo you have taken as starting point.
> > > (repo + extra patches ...).
> > 
> > It's mainline 3.6-rc6 and you can see the complete set of patches
> > at https://github.com/ohporter/linux/tree/edma-dmaengine-am33xx-rfc-v1
> > after commit 5698bd757d55b1bb87edd1a9744ab09c142abfc2
> > 
> > > This will help us to test the code.
> > > 
> > > This is because I looked at the patch 12/13 and I see that mmc
> > > device-node is modified. But in mainline I don’t see device 
> > > node for mmc (yet).
> > 
> > Oops. You'll need e62a3333ae450bcdefbe22229d7bc277ae0ef645 and
> > fe97304557d2c6f7d0aaf1ea028ea48ffca366a9 which I forgot to include
> > in this series. I'll have them in for v2.
> 
> Yesterday I tested edma patches on latest linux-next/master + merge of 
> linux-omap/for_3.7/dts_part2. Below are my observations
> 
> 1. baseline = linux-next/master + merge of linux-omap/for_3.7/dts_part2
> 2. on top of above branch, I applied patches [1-9]/13 of your edma 
>    patches
> 3. few patches required trivial changes before applying
> 4. Applied dma of patches as you mentioned
> 5. add custom patch (ARM: CUSTOM: Build a uImage with dtb already 
>    appended)
>    From https://github.com/hvaibhav/am335x-linux/commit/
>         7e72f5ed4b702c9373d19f7626f07ae31a381d53#arch/arm/Makefile

Alternatively you can run a current u-boot master build for am335x and
the appended dtb is no longer required.

> 6. Modified 9/13 patch to apply properly on latest am33xx.dtsi.
> 	a. Edma portion as it is
> 	b. mmc portion as below
> 		mmc1: mmc@48060000 {
> 			compatible = "ti,omap3-hsmmc";
> 			ti,hwmods = "mmc1";
> 			ti,dual-volt;
> 			ti,needs-special-reset;
> 			bus-width = <4>;
> 			vmmc-supply = <&vmmc_reg>;
> 			dmas = <&edma 24
> 				&edma 25>;
> 			dma-names = "tx", "rx";
> 		};
> 	c. added mmc pinmux as-well
> 
> 7. make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm distclean
>    make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm 
>    omap2plus_defconfig
> 
> 8. enabled TI_EDMA from menuconfig (since it was not enabled for 
>    omap2plus_defconfig
> 
> 9. make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm uImage
>    make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm 
>    uImage-dtb.am335x-evm
> 
> With above changes, edma probe was failing at request_mem_region() 
> Inside linux-next/arch/arm/common/edma.c --> edma_probe()
> 
> I had to modify edma_probe as below
> 
> 
> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
> index f337f81..efe2673 100644
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> @@ -1589,11 +1589,11 @@ static int __init edma_probe(struct platform_device *pdev)
>         for (j = 0; j < EDMA_MAX_CC; j++) {
>                 if (node) {
>                         int err;
> -                       err = of_address_to_resource(node, 0, &res[j]);
> +                       err = of_address_to_resource(node, j, &res[j]);
>                         if (err) {
>                                 dev_err(dev,
>                                         "unable to find 'reg' property\n");
> -                               return -EIO;
> +                               //return -EIO;
>                         }
>                         r[j] = &res[j];

Hrm, looks like a dts issue if it can't find the reg resource on your
integration of this. In any case, I'll look at it in v2.

> With this I was able to boot on am335x-evm and do a successful MMC 
> copy-md5sum-compare test.

Great! Thanks for testing this.

> I believe you are looking into above issue in your v2 version.

Yes.

-Matt
diff mbox

Patch

diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index f337f81..efe2673 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -1589,11 +1589,11 @@  static int __init edma_probe(struct platform_device *pdev)
        for (j = 0; j < EDMA_MAX_CC; j++) {
                if (node) {
                        int err;
-                       err = of_address_to_resource(node, 0, &res[j]);
+                       err = of_address_to_resource(node, j, &res[j]);
                        if (err) {
                                dev_err(dev,
                                        "unable to find 'reg' property\n");
-                               return -EIO;
+                               //return -EIO;
                        }
                        r[j] = &res[j];