| Message ID | 1348839609-10456-3-git-send-email-lokeshvutla@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Lokesh Vutla <lokeshvutla@ti.com> [120928 06:41]: > Move plat/dma.h header to platform_data/dma-omap.h as > part of the single zImage work. Hmm there's no platform data in this header, just exported things for drivers to use. So it should not be placed into platform_data. Maybe it should be #include <asm/mach/dma-omap.h> for now? Regards, Tony
On Fri, Sep 28, 2012 at 8:25 PM, Tony Lindgren <tony@atomide.com> wrote: > > * Lokesh Vutla <lokeshvutla@ti.com> [120928 06:41]: > > Move plat/dma.h header to platform_data/dma-omap.h as > > part of the single zImage work. > > Hmm there's no platform data in this header, just > exported things for drivers to use. So it should not > be placed into platform_data. > > Maybe it should be #include <asm/mach/dma-omap.h> for now? > I wasn't sure either when the file was placed under platform-data. I agree for now we can keep it mach layer but than means OMAP1 and OMAP2+ DMA header and source code needs to be split. That is not so straight forward. With DMA engine conversion hopefully, we might get rid of the header eventually, but for now not sure whether we should go ahead and follow the splitting part. Thoughts ? Regards Santosh
* Shilimkar, Santosh <santosh.shilimkar@ti.com> [120928 08:02]: > On Fri, Sep 28, 2012 at 8:25 PM, Tony Lindgren <tony@atomide.com> wrote: > > > > * Lokesh Vutla <lokeshvutla@ti.com> [120928 06:41]: > > > Move plat/dma.h header to platform_data/dma-omap.h as > > > part of the single zImage work. > > > > Hmm there's no platform data in this header, just > > exported things for drivers to use. So it should not > > be placed into platform_data. > > > > Maybe it should be #include <asm/mach/dma-omap.h> for now? > > > I wasn't sure either when the file was placed under platform-data. > I agree for now we can keep it mach layer but than means OMAP1 and > OMAP2+ DMA header and source code needs to be split. That > is not so straight forward. No need for that, the path I'm suggesting is located under arch/arm/include/asm/mach, it's not same as include <mach/dma-omap.h>. > With DMA engine conversion hopefully, we might get rid of the > header eventually, but for now not sure whether we should > go ahead and follow the splitting part. > > Thoughts ? No need for splitting anything :) The other possible location would be just include <linux/dma-omap.h>, but as we all know that will be going away, <asm/mach/dma-omap.h> is probably better. Tony
On Fri, Sep 28, 2012 at 8:35 PM, Tony Lindgren <tony@atomide.com> wrote: > * Shilimkar, Santosh <santosh.shilimkar@ti.com> [120928 08:02]: >> On Fri, Sep 28, 2012 at 8:25 PM, Tony Lindgren <tony@atomide.com> wrote: >> > >> > * Lokesh Vutla <lokeshvutla@ti.com> [120928 06:41]: >> > > Move plat/dma.h header to platform_data/dma-omap.h as >> > > part of the single zImage work. >> > >> > Hmm there's no platform data in this header, just >> > exported things for drivers to use. So it should not >> > be placed into platform_data. >> > >> > Maybe it should be #include <asm/mach/dma-omap.h> for now? >> > >> I wasn't sure either when the file was placed under platform-data. >> I agree for now we can keep it mach layer but than means OMAP1 and >> OMAP2+ DMA header and source code needs to be split. That >> is not so straight forward. > > No need for that, the path I'm suggesting is located under > arch/arm/include/asm/mach, it's not same as include <mach/dma-omap.h>. > That sound ok. >> With DMA engine conversion hopefully, we might get rid of the >> header eventually, but for now not sure whether we should >> go ahead and follow the splitting part. >> >> Thoughts ? > > No need for splitting anything :) > > The other possible location would be just include <linux/dma-omap.h>, > but as we all know that will be going away, <asm/mach/dma-omap.h> > is probably better. > Agree. I missed the "arch/arm/include/asm/mach" path. Thanks. Regards Santosh
On Fri, Sep 28, 2012 at 08:05:38AM -0700, Tony Lindgren wrote: > * Shilimkar, Santosh <santosh.shilimkar@ti.com> [120928 08:02]: > > On Fri, Sep 28, 2012 at 8:25 PM, Tony Lindgren <tony@atomide.com> wrote: > > > > > > * Lokesh Vutla <lokeshvutla@ti.com> [120928 06:41]: > > > > Move plat/dma.h header to platform_data/dma-omap.h as > > > > part of the single zImage work. > > > > > > Hmm there's no platform data in this header, just > > > exported things for drivers to use. So it should not > > > be placed into platform_data. > > > > > > Maybe it should be #include <asm/mach/dma-omap.h> for now? > > > > > I wasn't sure either when the file was placed under platform-data. > > I agree for now we can keep it mach layer but than means OMAP1 and > > OMAP2+ DMA header and source code needs to be split. That > > is not so straight forward. > > No need for that, the path I'm suggesting is located under > arch/arm/include/asm/mach, it's not same as include <mach/dma-omap.h>. > > > With DMA engine conversion hopefully, we might get rid of the > > header eventually, but for now not sure whether we should > > go ahead and follow the splitting part. > > > > Thoughts ? > > No need for splitting anything :) > > The other possible location would be just include <linux/dma-omap.h>, > but as we all know that will be going away, <asm/mach/dma-omap.h> > is probably better. No, not asm/mach/anything, please. Let's try to get headers into the right place second time around. This header appears to contain: 1. definitions for DMA signals, used by drivers. This can be eliminated by using DT, platform data, or IORESOURCE_DMA (that's in preference order) which then means that these definitions can live in a header file in arch/arm/mach-omap*/ if at all. 2. data definitions and structures used by drivers using the legacy OMAP DMA API. So, it doesn't contain platform data (as said above). It's not an API definition between core ARM code and ARM platform code, so that rules out arch/arm/include/asm/mach. Obviously arch/arm/include/asm is out of the question too. I don't think we have a clear cut place for this to live - and lets be clear that this file will eventually be going away _anyway_ when OMAP is converted 100% to DMA engine. So, where to put the file? At the moment, I don't know, it doesn't seem to have an obvious home other than where it currently is, which then gets in the way of the single kernel work.
On 09/28/2012 10:54 AM, Russell King - ARM Linux wrote: > On Fri, Sep 28, 2012 at 08:05:38AM -0700, Tony Lindgren wrote: >> * Shilimkar, Santosh <santosh.shilimkar@ti.com> [120928 08:02]: >>> On Fri, Sep 28, 2012 at 8:25 PM, Tony Lindgren <tony@atomide.com> wrote: >>>> >>>> * Lokesh Vutla <lokeshvutla@ti.com> [120928 06:41]: >>>>> Move plat/dma.h header to platform_data/dma-omap.h as >>>>> part of the single zImage work. >>>> >>>> Hmm there's no platform data in this header, just >>>> exported things for drivers to use. So it should not >>>> be placed into platform_data. >>>> >>>> Maybe it should be #include <asm/mach/dma-omap.h> for now? >>>> >>> I wasn't sure either when the file was placed under platform-data. >>> I agree for now we can keep it mach layer but than means OMAP1 and >>> OMAP2+ DMA header and source code needs to be split. That >>> is not so straight forward. >> >> No need for that, the path I'm suggesting is located under >> arch/arm/include/asm/mach, it's not same as include <mach/dma-omap.h>. >> >>> With DMA engine conversion hopefully, we might get rid of the >>> header eventually, but for now not sure whether we should >>> go ahead and follow the splitting part. >>> >>> Thoughts ? >> >> No need for splitting anything :) >> >> The other possible location would be just include <linux/dma-omap.h>, >> but as we all know that will be going away, <asm/mach/dma-omap.h> >> is probably better. > > No, not asm/mach/anything, please. Let's try to get headers into the > right place second time around. > > This header appears to contain: > > 1. definitions for DMA signals, used by drivers. > > This can be eliminated by using DT, platform data, or IORESOURCE_DMA > (that's in preference order) which then means that these definitions > can live in a header file in arch/arm/mach-omap*/ if at all. > > 2. data definitions and structures used by drivers using the legacy OMAP > DMA API. > > So, it doesn't contain platform data (as said above). It's not an > API definition between core ARM code and ARM platform code, so that > rules out arch/arm/include/asm/mach. Obviously arch/arm/include/asm > is out of the question too. > > I don't think we have a clear cut place for this to live - and lets > be clear that this file will eventually be going away _anyway_ when > OMAP is converted 100% to DMA engine. > > So, where to put the file? At the moment, I don't know, it doesn't > seem to have an obvious home other than where it currently is, which > then gets in the way of the single kernel work. I am having the same problem with the OMAP dmtimer platform driver that the legacy DMA driver has. It is slightly worse as currently it is pure custom platform driver. Obviously long-term it would be best to create a generic timer driver in drivers/timer/ that other devices and architectures could use but we are a long way from that. I know that this is ugly and has probably already been shot-down, but as a short-term fix, has creating arch/arm/plat-omap/include/plat-omap been NAK'ed for such problematic drivers? Cheers Jon
* Jon Hunter <jon-hunter@ti.com> [120928 12:36]: > > On 09/28/2012 10:54 AM, Russell King - ARM Linux wrote: > > On Fri, Sep 28, 2012 at 08:05:38AM -0700, Tony Lindgren wrote: > >> * Shilimkar, Santosh <santosh.shilimkar@ti.com> [120928 08:02]: > >>> On Fri, Sep 28, 2012 at 8:25 PM, Tony Lindgren <tony@atomide.com> wrote: > >>>> > >>>> * Lokesh Vutla <lokeshvutla@ti.com> [120928 06:41]: > >>>>> Move plat/dma.h header to platform_data/dma-omap.h as > >>>>> part of the single zImage work. > >>>> > >>>> Hmm there's no platform data in this header, just > >>>> exported things for drivers to use. So it should not > >>>> be placed into platform_data. > >>>> > >>>> Maybe it should be #include <asm/mach/dma-omap.h> for now? > >>>> > >>> I wasn't sure either when the file was placed under platform-data. > >>> I agree for now we can keep it mach layer but than means OMAP1 and > >>> OMAP2+ DMA header and source code needs to be split. That > >>> is not so straight forward. > >> > >> No need for that, the path I'm suggesting is located under > >> arch/arm/include/asm/mach, it's not same as include <mach/dma-omap.h>. > >> > >>> With DMA engine conversion hopefully, we might get rid of the > >>> header eventually, but for now not sure whether we should > >>> go ahead and follow the splitting part. > >>> > >>> Thoughts ? > >> > >> No need for splitting anything :) > >> > >> The other possible location would be just include <linux/dma-omap.h>, > >> but as we all know that will be going away, <asm/mach/dma-omap.h> > >> is probably better. > > > > No, not asm/mach/anything, please. Let's try to get headers into the > > right place second time around. > > > > This header appears to contain: > > > > 1. definitions for DMA signals, used by drivers. > > > > This can be eliminated by using DT, platform data, or IORESOURCE_DMA > > (that's in preference order) which then means that these definitions > > can live in a header file in arch/arm/mach-omap*/ if at all. > > > > 2. data definitions and structures used by drivers using the legacy OMAP > > DMA API. > > > > So, it doesn't contain platform data (as said above). It's not an > > API definition between core ARM code and ARM platform code, so that > > rules out arch/arm/include/asm/mach. Obviously arch/arm/include/asm > > is out of the question too. > > > > I don't think we have a clear cut place for this to live - and lets > > be clear that this file will eventually be going away _anyway_ when > > OMAP is converted 100% to DMA engine. > > > > So, where to put the file? At the moment, I don't know, it doesn't > > seem to have an obvious home other than where it currently is, which > > then gets in the way of the single kernel work. > > I am having the same problem with the OMAP dmtimer platform driver that > the legacy DMA driver has. It is slightly worse as currently it is pure > custom platform driver. Obviously long-term it would be best to create a > generic timer driver in drivers/timer/ that other devices and > architectures could use but we are a long way from that. > > I know that this is ugly and has probably already been shot-down, but as > a short-term fix, has creating arch/arm/plat-omap/include/plat-omap been > NAK'ed for such problematic drivers? Sounds like that's the way to go then. What we did not want to do is just move all the files blindly there, but for these files that seems like the way to go until they are just regular device drivers. Regards, Tony
On Sat, Sep 29, 2012 at 10:27 PM, Tony Lindgren <tony@atomide.com> wrote: > * Jon Hunter <jon-hunter@ti.com> [120928 12:36]: >> >> On 09/28/2012 10:54 AM, Russell King - ARM Linux wrote: >> > On Fri, Sep 28, 2012 at 08:05:38AM -0700, Tony Lindgren wrote: >> >> * Shilimkar, Santosh <santosh.shilimkar@ti.com> [120928 08:02]: >> >>> On Fri, Sep 28, 2012 at 8:25 PM, Tony Lindgren <tony@atomide.com> wrote: >> >>>> >> >>>> * Lokesh Vutla <lokeshvutla@ti.com> [120928 06:41]: >> >>>>> Move plat/dma.h header to platform_data/dma-omap.h as >> >>>>> part of the single zImage work. >> >>>> >> >>>> Hmm there's no platform data in this header, just >> >>>> exported things for drivers to use. So it should not >> >>>> be placed into platform_data. >> >>>> >> >>>> Maybe it should be #include <asm/mach/dma-omap.h> for now? >> >>>> >> >>> I wasn't sure either when the file was placed under platform-data. >> >>> I agree for now we can keep it mach layer but than means OMAP1 and >> >>> OMAP2+ DMA header and source code needs to be split. That >> >>> is not so straight forward. >> >> >> >> No need for that, the path I'm suggesting is located under >> >> arch/arm/include/asm/mach, it's not same as include <mach/dma-omap.h>. >> >> >> >>> With DMA engine conversion hopefully, we might get rid of the >> >>> header eventually, but for now not sure whether we should >> >>> go ahead and follow the splitting part. >> >>> >> >>> Thoughts ? >> >> >> >> No need for splitting anything :) >> >> >> >> The other possible location would be just include <linux/dma-omap.h>, >> >> but as we all know that will be going away, <asm/mach/dma-omap.h> >> >> is probably better. >> > >> > No, not asm/mach/anything, please. Let's try to get headers into the >> > right place second time around. >> > >> > This header appears to contain: >> > >> > 1. definitions for DMA signals, used by drivers. >> > >> > This can be eliminated by using DT, platform data, or IORESOURCE_DMA >> > (that's in preference order) which then means that these definitions >> > can live in a header file in arch/arm/mach-omap*/ if at all. >> > >> > 2. data definitions and structures used by drivers using the legacy OMAP >> > DMA API. >> > >> > So, it doesn't contain platform data (as said above). It's not an >> > API definition between core ARM code and ARM platform code, so that >> > rules out arch/arm/include/asm/mach. Obviously arch/arm/include/asm >> > is out of the question too. >> > >> > I don't think we have a clear cut place for this to live - and lets >> > be clear that this file will eventually be going away _anyway_ when >> > OMAP is converted 100% to DMA engine. >> > >> > So, where to put the file? At the moment, I don't know, it doesn't >> > seem to have an obvious home other than where it currently is, which >> > then gets in the way of the single kernel work. >> >> I am having the same problem with the OMAP dmtimer platform driver that >> the legacy DMA driver has. It is slightly worse as currently it is pure >> custom platform driver. Obviously long-term it would be best to create a >> generic timer driver in drivers/timer/ that other devices and >> architectures could use but we are a long way from that. >> >> I know that this is ugly and has probably already been shot-down, but as >> a short-term fix, has creating arch/arm/plat-omap/include/plat-omap been >> NAK'ed for such problematic drivers? > > Sounds like that's the way to go then. What we did not want to do is > just move all the files blindly there, but for these files that > seems like the way to go until they are just regular device drivers. Ok, Ill follow this. ll move plat/dma.h to plat-omap/dma-omap.h Thanks Lokesh > > Regards, > > Tony
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index a2e53e1..d567bf2 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -33,13 +33,13 @@ #include <linux/omapfb.h> #include <linux/leds.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/dma.h> #include <plat/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index fa98327..ad533bd 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -33,6 +33,7 @@ #include <linux/omapfb.h> #include <linux/leds.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/dma-omap.h> #include <asm/setup.h> #include <asm/page.h> @@ -43,7 +44,6 @@ #include <mach/mux.h> #include <plat/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/dma.h> #include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 1c578d5..8018ed9 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -29,6 +29,7 @@ #include <linux/apm-emulation.h> #include <linux/omapfb.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,7 +38,6 @@ #include <mach/flash.h> #include <mach/mux.h> #include <plat/tc.h> -#include <plat/dma.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 9715809..2ecb8d5 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -28,6 +28,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -36,7 +37,6 @@ #include <plat/led.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> #include <plat/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e311032..a48a941 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -31,6 +31,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,7 +39,6 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> #include <plat/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 13bf2cc..dcc63ee 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -29,6 +29,7 @@ #include <linux/export.h> #include <linux/omapfb.h> #include <linux/platform_data/keypad-omap.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -36,7 +37,6 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> #include <mach/irda.h> #include <plat/tc.h> #include <mach/board-sx1.h> diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 0cc54dd..b050980 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -16,12 +16,12 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach/map.h> #include <plat/tc.h> #include <mach/mux.h> -#include <plat/dma.h> #include <plat/mmc.h> #include <mach/omap7xx.h> diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 29007fe..a81a659 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -24,8 +24,8 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/io.h> +#include <linux/platform_data/dma-omap.h> -#include <plat/dma.h> #include <plat/tc.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 6a5baab..1b129c9 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -12,13 +12,13 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/platform_data/dma-omap.h> #include <asm/tlb.h> #include <asm/mach/map.h> #include <mach/mux.h> #include <plat/tc.h> -#include <plat/dma.h> #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index ed42628..b5cc8c8 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -26,8 +26,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/io.h> - -#include <plat/dma.h> +#include <linux/platform_data/dma-omap.h> #include <mach/hardware.h> #include <mach/lcdc.h> diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index bdc2e75..5e65d4a 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -18,8 +18,8 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/platform_data/dma-omap.h> -#include <plat/dma.h> #include <mach/mux.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-ti-mcbsp.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 47ec161..223c748 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -43,6 +43,7 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/atomic.h> +#include <linux/platform_data/dma-omap.h> #include <asm/system_misc.h> #include <asm/irq.h> @@ -54,7 +55,6 @@ #include <plat/sram.h> #include <plat/tc.h> #include <mach/mux.h> -#include <plat/dma.h> #include <plat/dmtimer.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 96cd369..a05e9aa 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/mmc/host.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -32,7 +33,6 @@ #include <plat/usb.h> #include "common.h" -#include <plat/dma.h> #include <plat/gpmc.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index f6c48dd..4b6d000 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -26,13 +26,13 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/input/matrix_keypad.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/menelaus.h> -#include <plat/dma.h> #include <plat/gpmc.h> #include "debug-devices.h" diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ed85fb8..7393361 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -27,11 +27,11 @@ #include <linux/power/isp1704_charger.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/platform_data/dma-omap.h> #include <asm/system_info.h> #include "common.h" -#include <plat/dma.h> #include <plat/gpmc.h> #include <plat/omap-pm.h> #include "gpmc-smc91x.h" diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 7bbb05d..351f249 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -18,13 +18,13 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" -#include <plat/dma.h> #include <plat/gpmc.h> #include <plat/usb.h> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d092d2a8..6979ee5 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,12 +19,12 @@ #include <linux/of.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include "iomap.h" -#include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include "omap4-keypad.h" diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index ff75abe..0d35896 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -27,10 +27,10 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/platform_data/dma-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -#include <plat/dma.h> #define OMAP2_DMA_STRIDE 0x60 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4234d28..b837e31 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/platform_data/dma-omap.h> #include <asm/tlb.h> #include <asm/mach/map.h> @@ -31,7 +32,6 @@ #include <plat/omap-pm.h> #include <plat/omap_hwmod.h> #include <plat/multi.h> -#include <plat/dma.h> #include "soc.h" #include "iomap.h" diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 37f8f94..a6cada4 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -19,8 +19,8 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/platform_data/asoc-ti-mcbsp.h> +#include <linux/platform_data/dma-omap.h> -#include <plat/dma.h> #include <plat/omap_device.h> #include <linux/pm_runtime.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 10575a1..e1b437b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -13,9 +13,9 @@ * XXX these should be marked initdata for multi-OMAP kernels */ #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/dma-omap.h> #include <plat/omap_hwmod.h> -#include <plat/dma.h> #include <plat/serial.h> #include <plat/i2c.h> #include <plat/dmtimer.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 60de70f..c69a109 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -14,9 +14,9 @@ */ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/dma-omap.h> #include <plat/omap_hwmod.h> -#include <plat/dma.h> #include <plat/serial.h> #include <plat/i2c.h> #include <plat/dmtimer.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 8851bbb..a0d1153 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -9,9 +9,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/platform_data/dma-omap.h> + #include <plat/omap_hwmod.h> #include <plat/serial.h> -#include <plat/dma.h> #include <plat/common.h> #include "hdq1w.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index feeb401..7941119 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -11,9 +11,9 @@ #include <plat/omap_hwmod.h> #include <plat/serial.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/dma.h> #include <plat/dmtimer.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/dma-omap.h> #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 59d5c1c..8a182aa 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -13,12 +13,12 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#include <linux/platform_data/dma-omap.h> #include <plat/omap_hwmod.h> #include <plat/cpu.h> #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/dma.h> #include <plat/mmc.h> #include <plat/i2c.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 94b38af..ab85cdd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -16,9 +16,9 @@ */ #include <linux/power/smartreflex.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/dma-omap.h> #include <plat/omap_hwmod.h> -#include <plat/dma.h> #include <plat/serial.h> #include "l3_3xxx.h" #include "l4_3xxx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 4c92f23..b361380 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,10 +21,10 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> +#include <linux/platform_data/dma-omap.h> #include <plat/omap_hwmod.h> #include <plat/i2c.h> -#include <plat/dma.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <plat/mmc.h> diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 8af6cd6..37c6392 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -30,6 +30,7 @@ #include <linux/time.h> #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -38,7 +39,6 @@ #include <plat/clock.h> #include <plat/sram.h> -#include <plat/dma.h> #include "common.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ba670db..3eba16c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -29,6 +29,7 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/dma-omap.h> #include <trace/events/power.h> @@ -41,7 +42,6 @@ #include <plat/sdrc.h> #include <plat/prcm.h> #include <plat/gpmc.h> -#include <plat/dma.h> #include "common.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0405c81..014dff7 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -26,10 +26,10 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> #include <linux/console.h> +#include <linux/platform_data/dma-omap.h> #include <plat/omap-serial.h> #include "common.h" -#include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap-pm.h> diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 111315a..18a837f 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -15,11 +15,11 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/dma-omap.h> #include <plat/common.h> #include <plat/vram.h> #include <linux/platform_data/dsp-omap.h> -#include <plat/dma.h> #include <plat/omap-secure.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c76ed8b..aa12fc4 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -35,9 +35,9 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/platform_data/dma-omap.h> #include <plat/cpu.h> -#include <plat/dma.h> #include <plat/tc.h> /* diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c index 093a8af..91fbc56 100644 --- a/drivers/crypto/omap-aes.c +++ b/drivers/crypto/omap-aes.c @@ -26,11 +26,11 @@ #include <linux/io.h> #include <linux/crypto.h> #include <linux/interrupt.h> +#include <linux/platform_data/dma-omap.h> #include <crypto/scatterwalk.h> #include <crypto/aes.h> #include <plat/cpu.h> -#include <plat/dma.h> /* OMAP TRM gives bitfields as start:end, where start is the higher bit number. For example 7:0 */ diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c index a3fd6fc..f523337 100644 --- a/drivers/crypto/omap-sham.c +++ b/drivers/crypto/omap-sham.c @@ -31,6 +31,8 @@ #include <linux/delay.h> #include <linux/crypto.h> #include <linux/cryptohash.h> +#include <linux/platform_data/dma-omap.h> + #include <crypto/scatterwalk.h> #include <crypto/algapi.h> #include <crypto/sha.h> @@ -38,7 +40,6 @@ #include <crypto/internal/hash.h> #include <plat/cpu.h> -#include <plat/dma.h> #include <mach/irqs.h> #define SHA_REG_DIGEST(x) (0x00 + ((x) * 0x04)) diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index bb2d8e7..b87cf89 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -16,11 +16,11 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/platform_data/dma-omap.h> #include "virt-dma.h" #include <plat/cpu.h> -#include <plat/dma.h> struct omap_dmadev { struct dma_device ddev; diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index c9783fb..54340c7 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -39,13 +39,13 @@ #include <linux/videodev2.h> #include <linux/dma-mapping.h> #include <linux/slab.h> +#include <linux/platform_data/dma-omap.h> #include <media/videobuf-dma-contig.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <plat/cpu.h> -#include <plat/dma.h> #include <plat/vrfb.h> #include <video/omapdss.h> diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c index 4be26abf6c..cb1ec32 100644 --- a/drivers/media/platform/omap/omap_vout_vrfb.c +++ b/drivers/media/platform/omap/omap_vout_vrfb.c @@ -12,11 +12,11 @@ #include <linux/sched.h> #include <linux/platform_device.h> #include <linux/videodev2.h> +#include <linux/platform_data/dma-omap.h> #include <media/videobuf-dma-contig.h> #include <media/v4l2-device.h> -#include <plat/dma.h> #include <plat/vrfb.h> #include "omap_voutdef.h" diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h index 9b7c865..e36b939 100644 --- a/drivers/media/platform/omap3isp/ispstat.h +++ b/drivers/media/platform/omap3isp/ispstat.h @@ -30,7 +30,8 @@ #include <linux/types.h> #include <linux/omap3isp.h> -#include <plat/dma.h> +#include <linux/platform_data/dma-omap.h> + #include <media/v4l2-event.h> #include "isp.h" diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index fa08c76..46c22c2 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -27,6 +27,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/platform_data/dma-omap.h> #include <media/omap1_camera.h> #include <media/soc_camera.h> @@ -34,9 +35,6 @@ #include <media/videobuf-dma-contig.h> #include <media/videobuf-dma-sg.h> -#include <plat/dma.h> - - #define DRIVER_NAME "omap1-camera" #define DRIVER_VERSION "0.0.2" diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 48ad361..fe0765b 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -28,9 +28,9 @@ #include <linux/clk.h> #include <linux/scatterlist.h> #include <linux/slab.h> +#include <linux/platform_data/dma-omap.h> #include <plat/mmc.h> -#include <plat/dma.h> #define OMAP_MMC_REG_CMD 0x00 #define OMAP_MMC_REG_ARGL 0x01 diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 5b31386..b885c6b 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -22,12 +22,12 @@ #include <linux/omap-dma.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/platform_data/dma-omap.h> #ifdef CONFIG_MTD_NAND_OMAP_BCH #include <linux/bch.h> #endif -#include <plat/dma.h> #include <plat/gpmc.h> #include <linux/platform_data/mtd-nand-omap2.h> diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 1961be9..9c474b0 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -36,13 +36,13 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/regulator/consumer.h> +#include <linux/platform_data/dma-omap.h> #include <asm/mach/flash.h> #include <plat/gpmc.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include <asm/gpio.h> -#include <plat/dma.h> #include <plat/cpu.h> #define DRIVER_NAME "omap2-onenand" diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 2a4749c..fc28da8 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -38,14 +38,13 @@ #include <linux/err.h> #include <linux/prefetch.h> #include <linux/io.h> +#include <linux/platform_data/dma-omap.h> #include <asm/byteorder.h> #include <asm/irq.h> #include <asm/unaligned.h> #include <asm/mach-types.h> -#include <plat/dma.h> - #include <mach/usb.h> #include "omap_udc.h" diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 7a62b95..b8c5828 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -16,7 +16,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <plat/dma.h> +#include <linux/platform_data/dma-omap.h> #include "musb_core.h" #include "tusb6010.h" diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 7767338..c6f82b3 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -29,9 +29,9 @@ #include <linux/vmalloc.h> #include <linux/clk.h> #include <linux/gfp.h> +#include <linux/platform_data/dma-omap.h> #include <mach/lcdc.h> -#include <plat/dma.h> #include <asm/mach-types.h> diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 4351c43..22e321b 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -29,8 +29,7 @@ #include <linux/slab.h> #include <linux/uaccess.h> #include <linux/module.h> - -#include <plat/dma.h> +#include <linux/platform_data/dma-omap.h> #include "omapfb.h" #include "lcdc.h" diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c index f79c137..f857574 100644 --- a/drivers/video/omap/sossi.c +++ b/drivers/video/omap/sossi.c @@ -24,8 +24,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/interrupt.h> - -#include <plat/dma.h> +#include <linux/platform_data/dma-omap.h> #include "omapfb.h" #include "lcdc.h" diff --git a/arch/arm/plat-omap/include/plat/dma.h b/include/linux/platform_data/dma-omap.h similarity index 99% rename from arch/arm/plat-omap/include/plat/dma.h rename to include/linux/platform_data/dma-omap.h index e413bd8..366ca27 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/include/linux/platform_data/dma-omap.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/dma.h + * OMAP DMA handling defines and function * * Copyright (C) 2003 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com>
Move plat/dma.h header to platform_data/dma-omap.h as part of the single zImage work. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by : Santosh Shilimkar <santosh.shilimkar@ti.com> --- arch/arm/mach-omap1/board-h2.c | 2 +- arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 2 +- arch/arm/mach-omap1/devices.c | 2 +- arch/arm/mach-omap1/dma.c | 2 +- arch/arm/mach-omap1/io.c | 2 +- arch/arm/mach-omap1/lcd_dma.c | 3 +-- arch/arm/mach-omap1/mcbsp.c | 2 +- arch/arm/mach-omap1/pm.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-rx51.c | 2 +- arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/dma.c | 2 +- arch/arm/mach-omap2/io.c | 2 +- arch/arm/mach-omap2/mcbsp.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 3 ++- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 2 +- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/plat-omap/common.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- drivers/crypto/omap-aes.c | 2 +- drivers/crypto/omap-sham.c | 3 ++- drivers/dma/omap-dma.c | 2 +- drivers/media/platform/omap/omap_vout.c | 2 +- drivers/media/platform/omap/omap_vout_vrfb.c | 2 +- drivers/media/platform/omap3isp/ispstat.h | 3 ++- drivers/media/platform/soc_camera/omap1_camera.c | 4 +--- drivers/mmc/host/omap.c | 2 +- drivers/mtd/nand/omap2.c | 2 +- drivers/mtd/onenand/omap2.c | 2 +- drivers/usb/gadget/omap_udc.c | 3 +-- drivers/usb/musb/tusb6010_omap.c | 2 +- drivers/video/omap/lcdc.c | 2 +- drivers/video/omap/omapfb_main.c | 3 +-- drivers/video/omap/sossi.c | 3 +-- .../include/plat/dma.h => include/linux/platform_data/dma-omap.h | 2 +- 48 files changed, 51 insertions(+), 54 deletions(-) rename arch/arm/plat-omap/include/plat/dma.h => include/linux/platform_data/dma-omap.h (99%)