diff mbox

[02/11] fsmc/nand: Rearrange the fsmc_nand_data structure and update comments

Message ID 2aa2a9c00bcfa62605edfab8fb4c29448612ced3.1349778820.git.vipin.kumar@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Vipin Kumar Oct. 9, 2012, 10:44 a.m. UTC
Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
---
 drivers/mtd/nand/fsmc_nand.c | 51 ++++++++++++++++++++++++++------------------
 1 file changed, 30 insertions(+), 21 deletions(-)

Comments

Jean-Christophe PLAGNIOL-VILLARD Oct. 9, 2012, 11:52 a.m. UTC | #1
On 16:14 Tue 09 Oct     , Vipin Kumar wrote:
> Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
> ---
>  drivers/mtd/nand/fsmc_nand.c | 51 ++++++++++++++++++++++++++------------------
>  1 file changed, 30 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
> index e96d7d1..bd89580 100644
> --- a/drivers/mtd/nand/fsmc_nand.c
> +++ b/drivers/mtd/nand/fsmc_nand.c
> @@ -278,52 +278,61 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = {
>   * struct fsmc_nand_data - structure for FSMC NAND device state
>   *
>   * @pid:		Part ID on the AMBA PrimeCell format
> - * @mtd:		MTD info for a NAND flash.
> - * @nand:		Chip related info for a NAND flash.
> - * @partitions:		Partition info for a NAND Flash.
> - * @nr_partitions:	Total number of partition of a NAND flash.
> - *
> - * @ecc_place:		ECC placing locations in oobfree type format.
> - * @bank:		Bank number for probed device.
> - * @clk:		Clock structure for FSMC.
> + * @mtd:		MTD info for a NAND flash
> + * @nand:		Chip related info for a NAND flash
> + * @dev:		Device structure pointer
> + * @clk:		Clock structure for FSMC
> + * @ecc_place:		ECC placing locations in oobfree type format
> + * @bank:		Bank number for probed device
>   *
>   * @read_dma_chan:	DMA channel for read access
>   * @write_dma_chan:	DMA channel for write access to NAND
>   * @dma_access_complete: Completion structure
>   *
> - * @data_pa:		NAND Physical port for Data.
> - * @data_va:		NAND port for Data.
> - * @cmd_va:		NAND port for Command.
> - * @addr_va:		NAND port for Address.
> - * @regs_va:		FSMC regs base address.
> + * @dev_timings:	Timings to be programmed in controller
> + * @partitions:		Partition info for a NAND Flash
> + * @nr_partitions:	Total number of partition of a NAND flash
> + * @mode:		Defines the NAND device access mode
> + *			Can be one of:
> + *			- DMA access
> + *			- Word access (CPU)
> + *			- None (Use driver default ie bus width specific
> + *			  CPU access)
> + * @select_chip:	Select a particular bank
> + *
> + * @data_pa:		NAND Physical port for Data
> + * @data_va:		NAND port for Data
> + * @cmd_va:		NAND port for Command
> + * @addr_va:		NAND port for Address
> + * @regs_va:		FSMC regs base address
>   */
>  struct fsmc_nand_data {
>  	u32			pid;
>  	struct mtd_info		mtd;
>  	struct nand_chip	nand;
> -	struct mtd_partition	*partitions;
> -	unsigned int		nr_partitions;
> -
> -	struct fsmc_eccplace	*ecc_place;
> -	unsigned int		bank;
>  	struct device		*dev;
> -	enum access_mode	mode;
>  	struct clk		*clk;
> +	struct fsmc_eccplace	*ecc_place;
> +	unsigned int		bank;
>  
>  	/* DMA related objects */
>  	struct dma_chan		*read_dma_chan;
>  	struct dma_chan		*write_dma_chan;
>  	struct completion	dma_access_complete;
>  
> +	/* Recieved from plat data */
>  	struct fsmc_nand_timings *dev_timings;
> +	struct mtd_partition	*partitions;
> +	unsigned int		nr_partitions;
where do you use those execpt at probe time
> +	enum access_mode	mode;
> +	void			(*select_chip)(uint32_t bank, uint32_t busw);
>  
> +	/* Virtual/Physical addresses for CPU/DMA access */
>  	dma_addr_t		data_pa;
>  	void __iomem		*data_va;
>  	void __iomem		*cmd_va;
>  	void __iomem		*addr_va;
>  	void __iomem		*regs_va;
> -
> -	void			(*select_chip)(uint32_t bank, uint32_t busw);
>  };
>  
>  /* Assert CS signal based on chipnr */
> -- 
> 1.7.11.4
>
Viresh Kumar Oct. 9, 2012, 5:15 p.m. UTC | #2
On Tue, Oct 9, 2012 at 4:14 PM, Vipin Kumar <vipin.kumar@st.com> wrote:
> Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
> ---
>  drivers/mtd/nand/fsmc_nand.c | 51 ++++++++++++++++++++++++++------------------
>  1 file changed, 30 insertions(+), 21 deletions(-)

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Vipin Kumar Oct. 11, 2012, 4:24 a.m. UTC | #3
On 10/9/2012 5:22 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 16:14 Tue 09 Oct     , Vipin Kumar wrote:
>> Signed-off-by: Vipin Kumar<vipin.kumar@st.com>
>> ---
>>   drivers/mtd/nand/fsmc_nand.c | 51 ++++++++++++++++++++++++++------------------
>>   1 file changed, 30 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
>> index e96d7d1..bd89580 100644
>> --- a/drivers/mtd/nand/fsmc_nand.c
>> +++ b/drivers/mtd/nand/fsmc_nand.c
>> @@ -278,52 +278,61 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = {
>>    * struct fsmc_nand_data - structure for FSMC NAND device state
>>    *
>>    * @pid:		Part ID on the AMBA PrimeCell format
>> - * @mtd:		MTD info for a NAND flash.
>> - * @nand:		Chip related info for a NAND flash.
>> - * @partitions:		Partition info for a NAND Flash.
>> - * @nr_partitions:	Total number of partition of a NAND flash.
>> - *
>> - * @ecc_place:		ECC placing locations in oobfree type format.
>> - * @bank:		Bank number for probed device.
>> - * @clk:		Clock structure for FSMC.
>> + * @mtd:		MTD info for a NAND flash
>> + * @nand:		Chip related info for a NAND flash
>> + * @dev:		Device structure pointer
>> + * @clk:		Clock structure for FSMC
>> + * @ecc_place:		ECC placing locations in oobfree type format
>> + * @bank:		Bank number for probed device
>>    *
>>    * @read_dma_chan:	DMA channel for read access
>>    * @write_dma_chan:	DMA channel for write access to NAND
>>    * @dma_access_complete: Completion structure
>>    *
>> - * @data_pa:		NAND Physical port for Data.
>> - * @data_va:		NAND port for Data.
>> - * @cmd_va:		NAND port for Command.
>> - * @addr_va:		NAND port for Address.
>> - * @regs_va:		FSMC regs base address.
>> + * @dev_timings:	Timings to be programmed in controller
>> + * @partitions:		Partition info for a NAND Flash
>> + * @nr_partitions:	Total number of partition of a NAND flash
>> + * @mode:		Defines the NAND device access mode
>> + *			Can be one of:
>> + *			- DMA access
>> + *			- Word access (CPU)
>> + *			- None (Use driver default ie bus width specific
>> + *			  CPU access)
>> + * @select_chip:	Select a particular bank
>> + *
>> + * @data_pa:		NAND Physical port for Data
>> + * @data_va:		NAND port for Data
>> + * @cmd_va:		NAND port for Command
>> + * @addr_va:		NAND port for Address
>> + * @regs_va:		FSMC regs base address
>>    */
>>   struct fsmc_nand_data {
>>   	u32			pid;
>>   	struct mtd_info		mtd;
>>   	struct nand_chip	nand;
>> -	struct mtd_partition	*partitions;
>> -	unsigned int		nr_partitions;
>> -
>> -	struct fsmc_eccplace	*ecc_place;
>> -	unsigned int		bank;
>>   	struct device		*dev;
>> -	enum access_mode	mode;
>>   	struct clk		*clk;
>> +	struct fsmc_eccplace	*ecc_place;
>> +	unsigned int		bank;
>>
>>   	/* DMA related objects */
>>   	struct dma_chan		*read_dma_chan;
>>   	struct dma_chan		*write_dma_chan;
>>   	struct completion	dma_access_complete;
>>
>> +	/* Recieved from plat data */
>>   	struct fsmc_nand_timings *dev_timings;
>> +	struct mtd_partition	*partitions;
>> +	unsigned int		nr_partitions;
> where do you use those execpt at probe time

Yes, I can remove it completely. Thanks for that
diff mbox

Patch

diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index e96d7d1..bd89580 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -278,52 +278,61 @@  static struct fsmc_eccplace fsmc_ecc4_sp_place = {
  * struct fsmc_nand_data - structure for FSMC NAND device state
  *
  * @pid:		Part ID on the AMBA PrimeCell format
- * @mtd:		MTD info for a NAND flash.
- * @nand:		Chip related info for a NAND flash.
- * @partitions:		Partition info for a NAND Flash.
- * @nr_partitions:	Total number of partition of a NAND flash.
- *
- * @ecc_place:		ECC placing locations in oobfree type format.
- * @bank:		Bank number for probed device.
- * @clk:		Clock structure for FSMC.
+ * @mtd:		MTD info for a NAND flash
+ * @nand:		Chip related info for a NAND flash
+ * @dev:		Device structure pointer
+ * @clk:		Clock structure for FSMC
+ * @ecc_place:		ECC placing locations in oobfree type format
+ * @bank:		Bank number for probed device
  *
  * @read_dma_chan:	DMA channel for read access
  * @write_dma_chan:	DMA channel for write access to NAND
  * @dma_access_complete: Completion structure
  *
- * @data_pa:		NAND Physical port for Data.
- * @data_va:		NAND port for Data.
- * @cmd_va:		NAND port for Command.
- * @addr_va:		NAND port for Address.
- * @regs_va:		FSMC regs base address.
+ * @dev_timings:	Timings to be programmed in controller
+ * @partitions:		Partition info for a NAND Flash
+ * @nr_partitions:	Total number of partition of a NAND flash
+ * @mode:		Defines the NAND device access mode
+ *			Can be one of:
+ *			- DMA access
+ *			- Word access (CPU)
+ *			- None (Use driver default ie bus width specific
+ *			  CPU access)
+ * @select_chip:	Select a particular bank
+ *
+ * @data_pa:		NAND Physical port for Data
+ * @data_va:		NAND port for Data
+ * @cmd_va:		NAND port for Command
+ * @addr_va:		NAND port for Address
+ * @regs_va:		FSMC regs base address
  */
 struct fsmc_nand_data {
 	u32			pid;
 	struct mtd_info		mtd;
 	struct nand_chip	nand;
-	struct mtd_partition	*partitions;
-	unsigned int		nr_partitions;
-
-	struct fsmc_eccplace	*ecc_place;
-	unsigned int		bank;
 	struct device		*dev;
-	enum access_mode	mode;
 	struct clk		*clk;
+	struct fsmc_eccplace	*ecc_place;
+	unsigned int		bank;
 
 	/* DMA related objects */
 	struct dma_chan		*read_dma_chan;
 	struct dma_chan		*write_dma_chan;
 	struct completion	dma_access_complete;
 
+	/* Recieved from plat data */
 	struct fsmc_nand_timings *dev_timings;
+	struct mtd_partition	*partitions;
+	unsigned int		nr_partitions;
+	enum access_mode	mode;
+	void			(*select_chip)(uint32_t bank, uint32_t busw);
 
+	/* Virtual/Physical addresses for CPU/DMA access */
 	dma_addr_t		data_pa;
 	void __iomem		*data_va;
 	void __iomem		*cmd_va;
 	void __iomem		*addr_va;
 	void __iomem		*regs_va;
-
-	void			(*select_chip)(uint32_t bank, uint32_t busw);
 };
 
 /* Assert CS signal based on chipnr */