@@ -6,6 +6,26 @@ Required properties:
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupt: Should contain the DMAC interrupt number
+- nr_channels: Number of channels supported by hardware
+- is_private: The device channels should be marked as private and not for by the
+ general purpose DMA channel allocator. False if not passed.
+- chan_allocation_order: order of allocation of channel, 0 (default): ascending,
+ 1: descending
+- chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1:
+ increase from chan n->0
+- block_size: Maximum block size supported by the controller
+- nr_masters: Number of AHB masters supported by the controller
+- data_width: Maximum data width supported by hardware per AHB master
+ (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
+- slave_info:
+ - bus_id: name of this device channel, not just a device name since
+ devices may have more than one channel e.g. "foo_tx". For using the
+ dw_generic_filter(), slave drivers must pass exactly this string as
+ param to filter function.
+ - cfg_hi: Platform-specific initializer for the CFG_HI register
+ - cfg_lo: Platform-specific initializer for the CFG_LO register
+ - src_master: src master for transfers on allocated channel.
+ - dst_master: dest master for transfers on allocated channel.
Example:
@@ -14,4 +34,28 @@ Example:
reg = <0xfc000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
+
+ nr_channels = <8>;
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+ block_size = <0xfff>;
+ nr_masters = <2>;
+ data_width = <3 3 0 0>;
+
+ slave_info {
+ uart0-tx {
+ bus_id = "uart0-tx";
+ cfg_hi = <0x4000>; /* 0x8 << 11 */
+ cfg_lo = <0>;
+ src_master = <0>;
+ dst_master = <1>;
+ };
+ spi0-tx {
+ bus_id = "spi0-tx";
+ cfg_hi = <0x2000>; /* 0x4 << 11 */
+ cfg_lo = <0>;
+ src_master = <0>;
+ dst_master = <0>;
+ };
+ };
};
@@ -1179,6 +1179,53 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
dev_vdbg(chan2dev(chan), "%s: done\n", __func__);
}
+bool dw_dma_generic_filter(struct dma_chan *chan, void *param)
+{
+ struct dw_dma *dw = to_dw_dma(chan->device);
+ static struct dw_dma *last_dw;
+ static char *last_bus_id;
+ int i = -1;
+
+ /*
+ * dmaengine framework calls this routine for all channels of all dma
+ * controller, until true is returned. If 'param' bus_id is not
+ * registered with a dma controller (dw), then there is no need of
+ * running below function for all channels of dw.
+ *
+ * This block of code does this by saving the parameters of last
+ * failure. If dw and param are same, i.e. trying on same dw with
+ * different channel, return false.
+ */
+ if (last_dw) {
+ if ((last_bus_id == param) && (last_dw == dw))
+ return false;
+ }
+
+ /*
+ * Return true:
+ * - If dw_dma's platform data is not filled with slave info, then all
+ * dma controllers are fine for transfer.
+ * - Or if param is NULL
+ */
+ if (!dw->sd || !param)
+ return true;
+
+ while (++i < dw->sd_count) {
+ if (!strcmp(dw->sd[i].bus_id, param)) {
+ chan->private = &dw->sd[i];
+ last_dw = NULL;
+ last_bus_id = NULL;
+
+ return true;
+ }
+ }
+
+ last_dw = dw;
+ last_bus_id = param;
+ return false;
+}
+EXPORT_SYMBOL(dw_dma_generic_filter);
+
/* --------------------- Cyclic DMA API extensions -------------------- */
/**
@@ -1462,6 +1509,91 @@ static void dw_dma_off(struct dw_dma *dw)
dw->chan[i].initialized = false;
}
+#ifdef CONFIG_OF
+static struct dw_dma_platform_data *
+__devinit dw_dma_parse_dt(struct platform_device *pdev)
+{
+ struct device_node *sn, *cn, *np = pdev->dev.of_node;
+ struct dw_dma_platform_data *pdata;
+ struct dw_dma_slave *sd;
+ u32 val, arr[4];
+
+ if (!np) {
+ dev_err(&pdev->dev, "Missing DT data\n");
+ return NULL;
+ }
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ if (of_property_read_u32(np, "nr_channels", &pdata->nr_channels))
+ return NULL;
+
+ if (of_property_read_bool(np, "is_private"))
+ pdata->is_private = true;
+
+ if (!of_property_read_u32(np, "chan_allocation_order", &val))
+ pdata->chan_allocation_order = (unsigned char)val;
+
+ if (!of_property_read_u32(np, "chan_priority", &val))
+ pdata->chan_priority = val;
+
+ if (!of_property_read_u32(np, "block_size", &val))
+ pdata->block_size = val;
+
+ if (!of_property_read_u32(np, "nr_masters", &val)) {
+ if (val > 4)
+ return NULL;
+
+ pdata->nr_masters = val;
+ }
+
+ if (!of_property_read_u32_array(np, "data_width", arr,
+ pdata->nr_masters))
+ for (val = 0; val < pdata->nr_masters; val++)
+ pdata->data_width[val] = arr[val];
+
+ /* parse slave data */
+ sn = of_find_node_by_name(np, "slave_info");
+ if (!sn)
+ return pdata;
+
+ /* calculate number of slaves */
+ val = of_get_child_count(sn);
+ if (!val)
+ return NULL;
+
+ sd = devm_kzalloc(&pdev->dev, sizeof(*sd) * val, GFP_KERNEL);
+ if (!sd)
+ return NULL;
+
+ pdata->sd = sd;
+ pdata->sd_count = val;
+
+ for_each_child_of_node(sn, cn) {
+ sd->dma_dev = &pdev->dev;
+ of_property_read_string(cn, "bus_id", &sd->bus_id);
+ of_property_read_u32(cn, "cfg_hi", &sd->cfg_hi);
+ of_property_read_u32(cn, "cfg_lo", &sd->cfg_lo);
+ if (!of_property_read_u32(cn, "src_master", &val))
+ sd->src_master = val;
+
+ if (!of_property_read_u32(cn, "dst_master", &val))
+ sd->dst_master = val;
+ sd++;
+ }
+
+ return pdata;
+}
+#else
+static inline struct dw_dma_platform_data *
+dw_dma_parse_dt(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif
+
static int __devinit dw_probe(struct platform_device *pdev)
{
struct dw_dma_platform_data *pdata;
@@ -1478,6 +1610,9 @@ static int __devinit dw_probe(struct platform_device *pdev)
int i;
pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata)
+ pdata = dw_dma_parse_dt(pdev);
+
if (!pdata || pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS)
return -EINVAL;
@@ -1512,6 +1647,8 @@ static int __devinit dw_probe(struct platform_device *pdev)
clk_prepare_enable(dw->clk);
dw->regs = regs;
+ dw->sd = pdata->sd;
+ dw->sd_count = pdata->sd_count;
/* get hardware configuration parameters */
if (autocfg) {
@@ -231,6 +231,10 @@ struct dw_dma {
struct tasklet_struct tasklet;
struct clk *clk;
+ /* slave information */
+ struct dw_dma_slave *sd;
+ unsigned int sd_count;
+
u8 all_chan_mask;
/* hardware configuration */
@@ -15,6 +15,26 @@
#include <linux/dmaengine.h>
/**
+ * struct dw_dma_slave - Controller-specific information about a slave
+ *
+ * @dma_dev: required DMA master device. Depricated.
+ * @bus_id: name of this device channel, not just a device name since
+ * devices may have more than one channel e.g. "foo_tx"
+ * @cfg_hi: Platform-specific initializer for the CFG_HI register
+ * @cfg_lo: Platform-specific initializer for the CFG_LO register
+ * @src_master: src master for transfers on allocated channel.
+ * @dst_master: dest master for transfers on allocated channel.
+ */
+struct dw_dma_slave {
+ struct device *dma_dev;
+ const char *bus_id;
+ u32 cfg_hi;
+ u32 cfg_lo;
+ u8 src_master;
+ u8 dst_master;
+};
+
+/**
* struct dw_dma_platform_data - Controller configuration parameters
* @nr_channels: Number of channels supported by hardware (max 8)
* @is_private: The device channels should be marked as private and not for
@@ -25,6 +45,8 @@
* @nr_masters: Number of AHB masters supported by the controller
* @data_width: Maximum data width supported by hardware per AHB master
* (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
+ * @sd: slave specific data. Used for configuring channels
+ * @sd_count: count of slave data structures passed.
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
@@ -38,6 +60,9 @@ struct dw_dma_platform_data {
unsigned short block_size;
unsigned char nr_masters;
unsigned char data_width[4];
+
+ struct dw_dma_slave *sd;
+ unsigned int sd_count;
};
/* bursts size */
@@ -52,23 +77,6 @@ enum dw_dma_msize {
DW_DMA_MSIZE_256,
};
-/**
- * struct dw_dma_slave - Controller-specific information about a slave
- *
- * @dma_dev: required DMA master device
- * @cfg_hi: Platform-specific initializer for the CFG_HI register
- * @cfg_lo: Platform-specific initializer for the CFG_LO register
- * @src_master: src master for transfers on allocated channel.
- * @dst_master: dest master for transfers on allocated channel.
- */
-struct dw_dma_slave {
- struct device *dma_dev;
- u32 cfg_hi;
- u32 cfg_lo;
- u8 src_master;
- u8 dst_master;
-};
-
/* Platform-configurable bits in CFG_HI */
#define DWC_CFGH_FCMODE (1 << 0)
#define DWC_CFGH_FIFO_MODE (1 << 1)
@@ -106,5 +114,6 @@ void dw_dma_cyclic_stop(struct dma_chan *chan);
dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan);
dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan);
+bool dw_dma_generic_filter(struct dma_chan *chan, void *param);
#endif /* DW_DMAC_H */
dw_dmac driver already supports device tree but it used to have its platform data passed the non-DT way. This patch does following changes: - pass platform data via DT, non-DT way still takes precedence if both are used. - create generic filter routine - Earlier slave information was made available by slave specific filter routines in chan->private field. Now, this information would be passed from within dmac DT node. Slave drivers would now be required to pass bus_id (a string) as parameter to this generic filter(), which would be compared against the slave data passed from DT, by the generic filter routine. - Update binding document Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- V1->V2: ------ - Optimized filter & DT parsing routine - Removed unnecessary casts from changes - renamed filter function - Fixed function prototype and return value of DT parsing routine for !CONFIG_OF case - use of_get_child_count() Documentation/devicetree/bindings/dma/snps-dma.txt | 44 +++++++ drivers/dma/dw_dmac.c | 137 +++++++++++++++++++++ drivers/dma/dw_dmac_regs.h | 4 + include/linux/dw_dmac.h | 43 ++++--- 4 files changed, 211 insertions(+), 17 deletions(-)