| Message ID | 20121110154437.3061.76180.stgit@chazy-air (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Nov 10, 2012 at 03:44:37PM +0000, Christoffer Dall wrote: > From: Marc Zyngier <marc.zyngier@arm.com> > > Wire the basic framework code for VGIC support. Nothing to enable > yet. Again, not sure how useful this patch is. Might as well merge it with code that actually does something. Couple of comments inline anyway... > Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> > Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> > --- > arch/arm/include/asm/kvm_host.h | 7 ++++ > arch/arm/include/asm/kvm_vgic.h | 70 +++++++++++++++++++++++++++++++++++++++ > arch/arm/kvm/arm.c | 21 +++++++++++- > arch/arm/kvm/interrupts.S | 4 ++ > arch/arm/kvm/mmio.c | 3 ++ > virt/kvm/kvm_main.c | 5 ++- > 6 files changed, 107 insertions(+), 3 deletions(-) > create mode 100644 arch/arm/include/asm/kvm_vgic.h [...] > diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c > index 60b119a..426828a 100644 > --- a/arch/arm/kvm/arm.c > +++ b/arch/arm/kvm/arm.c > @@ -183,6 +183,9 @@ int kvm_dev_ioctl_check_extension(long ext) > { > int r; > switch (ext) { > +#ifdef CONFIG_KVM_ARM_VGIC > + case KVM_CAP_IRQCHIP: > +#endif > case KVM_CAP_USER_MEMORY: > case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: > case KVM_CAP_ONE_REG: > @@ -304,6 +307,10 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) > { > /* Force users to call KVM_ARM_VCPU_INIT */ > vcpu->arch.target = -1; > + > + /* Set up VGIC */ > + kvm_vgic_vcpu_init(vcpu); > + > return 0; > } > > @@ -363,7 +370,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, > */ > int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) > { > - return !!v->arch.irq_lines; > + return !!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v); > } So interrupt injection without the in-kernel GIC updates irq_lines, but the in-kernel GIC has its own separate data structures? Why can't the in-kernel GIC just use irq_lines instead of irq_pending_on_cpu? > > int kvm_arch_vcpu_in_guest_mode(struct kvm_vcpu *v) > @@ -633,6 +640,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) > > update_vttbr(vcpu->kvm); > > + kvm_vgic_sync_to_cpu(vcpu); > + > local_irq_disable(); > > /* > @@ -645,6 +654,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) > > if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { > local_irq_enable(); > + kvm_vgic_sync_from_cpu(vcpu); > continue; > } For VFP, we use different terminology (sync and flush). I don't think they're any clearer than what you have, but the consistency would be nice. Given that both these functions are run with interrupts enabled, why doesn't the second require a lock for updating dist->irq_pending_on_cpu? I notice there's a random smp_mb() over there... > > @@ -683,6 +693,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) > * Back from guest > *************************************************************/ > > + kvm_vgic_sync_from_cpu(vcpu); Likewise. > ret = handle_exit(vcpu, run, ret); > } > > @@ -965,6 +977,13 @@ static int init_hyp_mode(void) > } > } > > + /* > + * Init HYP view of VGIC > + */ > + err = kvm_vgic_hyp_init(); > + if (err) > + goto out_free_mappings; > + > return 0; > out_free_vfp: > free_percpu(kvm_host_vfp_state); [...] > diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c > index 2fb7319..665af96 100644 > --- a/virt/kvm/kvm_main.c > +++ b/virt/kvm/kvm_main.c > @@ -1880,12 +1880,13 @@ static long kvm_vcpu_ioctl(struct file *filp, > if (vcpu->kvm->mm != current->mm) > return -EIO; > > -#if defined(CONFIG_S390) || defined(CONFIG_PPC) > +#if defined(CONFIG_S390) || defined(CONFIG_PPC) || defined(CONFIG_ARM) > /* > * Special cases: vcpu ioctls that are asynchronous to vcpu execution, > * so vcpu_load() would break it. > */ > - if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT) > + if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT || > + ioctl == KVM_IRQ_LINE) > return kvm_arch_vcpu_ioctl(filp, ioctl, arg); > #endif Separate patch? Will -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 28/11/12 12:49, Will Deacon wrote: > On Sat, Nov 10, 2012 at 03:44:37PM +0000, Christoffer Dall wrote: >> From: Marc Zyngier <marc.zyngier@arm.com> >> >> Wire the basic framework code for VGIC support. Nothing to enable >> yet. > > Again, not sure how useful this patch is. Might as well merge it with code > that actually does something. Couple of comments inline anyway... > >> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> >> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> >> --- >> arch/arm/include/asm/kvm_host.h | 7 ++++ >> arch/arm/include/asm/kvm_vgic.h | 70 +++++++++++++++++++++++++++++++++++++++ >> arch/arm/kvm/arm.c | 21 +++++++++++- >> arch/arm/kvm/interrupts.S | 4 ++ >> arch/arm/kvm/mmio.c | 3 ++ >> virt/kvm/kvm_main.c | 5 ++- >> 6 files changed, 107 insertions(+), 3 deletions(-) >> create mode 100644 arch/arm/include/asm/kvm_vgic.h > > [...] > >> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c >> index 60b119a..426828a 100644 >> --- a/arch/arm/kvm/arm.c >> +++ b/arch/arm/kvm/arm.c >> @@ -183,6 +183,9 @@ int kvm_dev_ioctl_check_extension(long ext) >> { >> int r; >> switch (ext) { >> +#ifdef CONFIG_KVM_ARM_VGIC >> + case KVM_CAP_IRQCHIP: >> +#endif >> case KVM_CAP_USER_MEMORY: >> case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: >> case KVM_CAP_ONE_REG: >> @@ -304,6 +307,10 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) >> { >> /* Force users to call KVM_ARM_VCPU_INIT */ >> vcpu->arch.target = -1; >> + >> + /* Set up VGIC */ >> + kvm_vgic_vcpu_init(vcpu); >> + >> return 0; >> } >> >> @@ -363,7 +370,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, >> */ >> int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) >> { >> - return !!v->arch.irq_lines; >> + return !!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v); >> } > > So interrupt injection without the in-kernel GIC updates irq_lines, but the > in-kernel GIC has its own separate data structures? Why can't the in-kernel GIC > just use irq_lines instead of irq_pending_on_cpu? They serve very different purposes: - irq_lines directly controls the IRQ and FIQ lines (it is or-ed into the HCR register before entering the guest) - irq_pending_on_cpu deals with the CPU interface, and only that. Plus, it is a kernel only thing. What triggers the interrupt on the guest is the presence of list registers with a pending state. You signal interrupts one way or the other. > >> >> int kvm_arch_vcpu_in_guest_mode(struct kvm_vcpu *v) >> @@ -633,6 +640,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> >> update_vttbr(vcpu->kvm); >> >> + kvm_vgic_sync_to_cpu(vcpu); >> + >> local_irq_disable(); >> >> /* >> @@ -645,6 +654,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> >> if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { >> local_irq_enable(); >> + kvm_vgic_sync_from_cpu(vcpu); >> continue; >> } > > For VFP, we use different terminology (sync and flush). I don't think they're > any clearer than what you have, but the consistency would be nice. Which one maps to which? > Given that both these functions are run with interrupts enabled, why doesn't > the second require a lock for updating dist->irq_pending_on_cpu? I notice > there's a random smp_mb() over there... Updating *only* irq_pending_on_cpu doesn't require the lock (set_bit() should be safe, and I think the smp_mb() is a leftover of some debugging hack). kvm_vgic_to_cpu() does a lot more (it picks interrupt from the distributor, hence requires the lock to be taken). >> >> @@ -683,6 +693,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> * Back from guest >> *************************************************************/ >> >> + kvm_vgic_sync_from_cpu(vcpu); > > Likewise. > >> ret = handle_exit(vcpu, run, ret); >> } >> >> @@ -965,6 +977,13 @@ static int init_hyp_mode(void) >> } >> } >> >> + /* >> + * Init HYP view of VGIC >> + */ >> + err = kvm_vgic_hyp_init(); >> + if (err) >> + goto out_free_mappings; >> + >> return 0; >> out_free_vfp: >> free_percpu(kvm_host_vfp_state); > > [...] > >> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c >> index 2fb7319..665af96 100644 >> --- a/virt/kvm/kvm_main.c >> +++ b/virt/kvm/kvm_main.c >> @@ -1880,12 +1880,13 @@ static long kvm_vcpu_ioctl(struct file *filp, >> if (vcpu->kvm->mm != current->mm) >> return -EIO; >> >> -#if defined(CONFIG_S390) || defined(CONFIG_PPC) >> +#if defined(CONFIG_S390) || defined(CONFIG_PPC) || defined(CONFIG_ARM) >> /* >> * Special cases: vcpu ioctls that are asynchronous to vcpu execution, >> * so vcpu_load() would break it. >> */ >> - if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT) >> + if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT || >> + ioctl == KVM_IRQ_LINE) >> return kvm_arch_vcpu_ioctl(filp, ioctl, arg); >> #endif > > Separate patch? Probably, yes. M.
On Wed, Nov 28, 2012 at 01:09:37PM +0000, Marc Zyngier wrote: > On 28/11/12 12:49, Will Deacon wrote: > > On Sat, Nov 10, 2012 at 03:44:37PM +0000, Christoffer Dall wrote: > >> @@ -363,7 +370,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, > >> */ > >> int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) > >> { > >> - return !!v->arch.irq_lines; > >> + return !!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v); > >> } > > > > So interrupt injection without the in-kernel GIC updates irq_lines, but the > > in-kernel GIC has its own separate data structures? Why can't the in-kernel GIC > > just use irq_lines instead of irq_pending_on_cpu? > > They serve very different purposes: > - irq_lines directly controls the IRQ and FIQ lines (it is or-ed into > the HCR register before entering the guest) > - irq_pending_on_cpu deals with the CPU interface, and only that. Plus, > it is a kernel only thing. What triggers the interrupt on the guest is > the presence of list registers with a pending state. > > You signal interrupts one way or the other. Ok, thanks for the explanation. I suspect that we could use (another) cosmetic change then. How about cpui_irq_pending and hcr_irq_pending? > >> int kvm_arch_vcpu_in_guest_mode(struct kvm_vcpu *v) > >> @@ -633,6 +640,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) > >> > >> update_vttbr(vcpu->kvm); > >> > >> + kvm_vgic_sync_to_cpu(vcpu); > >> + > >> local_irq_disable(); > >> > >> /* > >> @@ -645,6 +654,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) > >> > >> if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { > >> local_irq_enable(); > >> + kvm_vgic_sync_from_cpu(vcpu); > >> continue; > >> } > > > > For VFP, we use different terminology (sync and flush). I don't think they're > > any clearer than what you have, but the consistency would be nice. > > Which one maps to which? sync: hardware -> data structure flush: data structure -> hardware > > Given that both these functions are run with interrupts enabled, why doesn't > > the second require a lock for updating dist->irq_pending_on_cpu? I notice > > there's a random smp_mb() over there... > > Updating *only* irq_pending_on_cpu doesn't require the lock (set_bit() > should be safe, and I think the smp_mb() is a leftover of some debugging > hack). kvm_vgic_to_cpu() does a lot more (it picks interrupt from the > distributor, hence requires the lock to be taken). Ok, if the barrier is just a hangover from something else and you don't have any races with test/clear operations then you should be alright. Will -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[...] >> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c >> index 2fb7319..665af96 100644 >> --- a/virt/kvm/kvm_main.c >> +++ b/virt/kvm/kvm_main.c >> @@ -1880,12 +1880,13 @@ static long kvm_vcpu_ioctl(struct file *filp, >> if (vcpu->kvm->mm != current->mm) >> return -EIO; >> >> -#if defined(CONFIG_S390) || defined(CONFIG_PPC) >> +#if defined(CONFIG_S390) || defined(CONFIG_PPC) || defined(CONFIG_ARM) >> /* >> * Special cases: vcpu ioctls that are asynchronous to vcpu execution, >> * so vcpu_load() would break it. >> */ >> - if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT) >> + if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT || >> + ioctl == KVM_IRQ_LINE) >> return kvm_arch_vcpu_ioctl(filp, ioctl, arg); >> #endif > > Separate patch? > KVM_IRQ_LINE is a VM ioctl, not a vcpu ioctl, so this is leftover from the duplicate VCPU/VM same ioctl mess. It's gone! -Christoffer -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index e66cd56..49ba25a 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -23,6 +23,7 @@ #include <asm/kvm_asm.h> #include <asm/fpstate.h> #include <asm/kvm_decode.h> +#include <asm/kvm_vgic.h> #define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS #define KVM_MEMORY_SLOTS 32 @@ -58,6 +59,9 @@ struct kvm_arch { /* Stage-2 page table */ pgd_t *pgd; + + /* Interrupt controller */ + struct vgic_dist vgic; }; #define KVM_NR_MEM_OBJS 40 @@ -92,6 +96,9 @@ struct kvm_vcpu_arch { struct vfp_hard_struct vfp_guest; struct vfp_hard_struct *vfp_host; + /* VGIC state */ + struct vgic_cpu vgic_cpu; + /* * Anything that is not used directly from assembly code goes * here. diff --git a/arch/arm/include/asm/kvm_vgic.h b/arch/arm/include/asm/kvm_vgic.h new file mode 100644 index 0000000..d75540a --- /dev/null +++ b/arch/arm/include/asm/kvm_vgic.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_KVM_VGIC_H +#define __ASM_ARM_KVM_VGIC_H + +struct vgic_dist { +}; + +struct vgic_cpu { +}; + +struct kvm; +struct kvm_vcpu; +struct kvm_run; +struct kvm_exit_mmio; + +#ifndef CONFIG_KVM_ARM_VGIC +static inline int kvm_vgic_hyp_init(void) +{ + return 0; +} + +static inline int kvm_vgic_init(struct kvm *kvm) +{ + return 0; +} + +static inline int kvm_vgic_create(struct kvm *kvm) +{ + return 0; +} + +static inline void kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu) {} +static inline void kvm_vgic_sync_to_cpu(struct kvm_vcpu *vcpu) {} +static inline void kvm_vgic_sync_from_cpu(struct kvm_vcpu *vcpu) {} + +static inline int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu) +{ + return 0; +} + +static inline bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run, + struct kvm_exit_mmio *mmio) +{ + return false; +} + +static inline int irqchip_in_kernel(struct kvm *kvm) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 60b119a..426828a 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -183,6 +183,9 @@ int kvm_dev_ioctl_check_extension(long ext) { int r; switch (ext) { +#ifdef CONFIG_KVM_ARM_VGIC + case KVM_CAP_IRQCHIP: +#endif case KVM_CAP_USER_MEMORY: case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: case KVM_CAP_ONE_REG: @@ -304,6 +307,10 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { /* Force users to call KVM_ARM_VCPU_INIT */ vcpu->arch.target = -1; + + /* Set up VGIC */ + kvm_vgic_vcpu_init(vcpu); + return 0; } @@ -363,7 +370,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, */ int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) { - return !!v->arch.irq_lines; + return !!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v); } int kvm_arch_vcpu_in_guest_mode(struct kvm_vcpu *v) @@ -633,6 +640,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) update_vttbr(vcpu->kvm); + kvm_vgic_sync_to_cpu(vcpu); + local_irq_disable(); /* @@ -645,6 +654,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { local_irq_enable(); + kvm_vgic_sync_from_cpu(vcpu); continue; } @@ -683,6 +693,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) * Back from guest *************************************************************/ + kvm_vgic_sync_from_cpu(vcpu); + ret = handle_exit(vcpu, run, ret); } @@ -965,6 +977,13 @@ static int init_hyp_mode(void) } } + /* + * Init HYP view of VGIC + */ + err = kvm_vgic_hyp_init(); + if (err) + goto out_free_mappings; + return 0; out_free_vfp: free_percpu(kvm_host_vfp_state); diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 7c89708..e418c9b 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -91,6 +91,8 @@ ENTRY(__kvm_vcpu_run) save_host_regs + restore_vgic_state r0 + @ Store hardware CP15 state and load guest state read_cp15_state write_cp15_state 1, r0 @@ -184,6 +186,8 @@ after_vfp_restore: read_cp15_state 1, r1 write_cp15_state + save_vgic_state r1 + restore_host_regs clrex @ Clear exclusive monitor bx lr @ return to IOCTL diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index d6a4ca0..eadec78a 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -149,6 +149,9 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, if (mmio.is_write) memcpy(mmio.data, vcpu_reg(vcpu, rt), mmio.len); + if (vgic_handle_mmio(vcpu, run, &mmio)) + return 1; + kvm_prepare_mmio(run, &mmio); return 0; } diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 2fb7319..665af96 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1880,12 +1880,13 @@ static long kvm_vcpu_ioctl(struct file *filp, if (vcpu->kvm->mm != current->mm) return -EIO; -#if defined(CONFIG_S390) || defined(CONFIG_PPC) +#if defined(CONFIG_S390) || defined(CONFIG_PPC) || defined(CONFIG_ARM) /* * Special cases: vcpu ioctls that are asynchronous to vcpu execution, * so vcpu_load() would break it. */ - if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT) + if (ioctl == KVM_S390_INTERRUPT || ioctl == KVM_INTERRUPT || + ioctl == KVM_IRQ_LINE) return kvm_arch_vcpu_ioctl(filp, ioctl, arg); #endif