| Message ID | 200903262049.10425.vasily@scopicsoftware.com (mailing list archive) |
|---|---|
| State | RFC |
| Headers | show |
On Thursday 26 March 2009 19:49:10 Vasily wrote: > Hello, please review the new version of v4l2 loopback driver. > I fixed up comments to the previous submission, waiting for the new ones > :-), reposting for patchwork tool > > --- > This patch introduces v4l2 loopback module > > From: Vasily Levin <vasaka@gmail.com> > > This is v4l2 loopback driver which can be used to make available any > userspace video as v4l2 device. Initialy it was written to make > videoeffects available to Skype, but in fact it have many more uses. Hi Vasily, It's still on my todo list, but I have had very little time. If you still haven't seen a review in two weeks time, then please send me a reminder. Sorry about this, normally I review things like this much sooner but it has been very hectic lately. Regards, Hans > > Priority: normal > > Signed-off-by: Vasily Levin <vasaka@gmail.com> > > diff -uprN v4l-dvb.orig/linux/drivers/media/video/Kconfig > v4l-dvb.my/linux/drivers/media/video/Kconfig --- > v4l-dvb.orig/linux/drivers/media/video/Kconfig 2009-03-21 > 07:08:06.000000000 +0200 +++ > v4l-dvb.my/linux/drivers/media/video/Kconfig 2009-03-25 > 23:36:13.000000000 +0200 @@ -465,6 +465,13 @@ config VIDEO_VIVI > Say Y here if you want to test video apps or debug V4L devices. > In doubt, say N. > > +config VIDEO_V4L2_LOOPBACK > + tristate "v4l2 loopback driver" > + depends on VIDEO_V4L2 && VIDEO_DEV > + help > + Say Y if you want to use v4l2 loopback driver. > + This driver can be compiled as a module, called v4l2loopback. > + > source "drivers/media/video/bt8xx/Kconfig" > > config VIDEO_SAA6588 > diff -uprN v4l-dvb.orig/linux/drivers/media/video/Makefile > v4l-dvb.my/linux/drivers/media/video/Makefile --- > v4l-dvb.orig/linux/drivers/media/video/Makefile 2009-03-21 > 07:08:06.000000000 +0200 +++ > v4l-dvb.my/linux/drivers/media/video/Makefile 2009-03-24 > 12:54:59.000000000 +0200 @@ -132,6 +132,7 @@ obj-$(CONFIG_VIDEO_IVTV) += > ivtv/ > obj-$(CONFIG_VIDEO_CX18) += cx18/ > > obj-$(CONFIG_VIDEO_VIVI) += vivi.o > +obj-$(CONFIG_VIDEO_V4L2_LOOPBACK) += v4l2loopback.o > obj-$(CONFIG_VIDEO_CX23885) += cx23885/ > > obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o > diff -uprN v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.c > v4l-dvb.my/linux/drivers/media/video/v4l2loopback.c --- > v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.c 1970-01-01 > 03:00:00.000000000 +0300 +++ > v4l-dvb.my/linux/drivers/media/video/v4l2loopback.c 2009-03-25 > 23:01:35.000000000 +0200 @@ -0,0 +1,725 @@ > +/* > + * v4l2loopback.c -- video 4 linux loopback driver > + * > + * Copyright (C) 2005-2009 > + * Vasily Levin (vasaka@gmail.com) > + * > + * This program is free software; you can redistribute it and/or > modify + * it under the terms of the GNU General Public License as > published by + * the Free Software Foundation; either version 2 of > the License, or + * (at your option) any later version. > + * > + */ > +#include <linux/version.h> > +#include <linux/vmalloc.h> > +#include <linux/mm.h> > +#include <linux/time.h> > +#include <linux/module.h> > +#include <media/v4l2-ioctl.h> > +#include "v4l2loopback.h" > + > +/* #define DEBUG > +#define DEBUG_RW */ > +#define YAVLD_STREAMING > + > +#ifdef DEBUG > +#define dprintk(fmt, args...)\ > + do {\ > + printk(KERN_INFO "v4l2-loopback: " fmt, ##args);\ > + } while (0) > +#else > +#define dprintk(fmt, args...) > +#endif > + > +#ifdef DEBUG_RW > +#define dprintkrw(fmt, args...)\ > + do {\ > + printk(KERN_INFO "v4l2-loopback: " fmt, ##args);\ > + } while (0) > +#else > +#define dprintkrw(fmt, args...) > +#endif > + > +/* global module data */ > +struct v4l2_loopback_device *dev; > +/* forward declarations */ > +static void init_buffers(int buffer_size); > +static const struct v4l2_file_operations v4l2_loopback_fops; > +static const struct v4l2_ioctl_ops v4l2_loopback_ioctl_ops; > +/**************************************************************** > +**************** my queue helpers ******************************* > +****************************************************************/ > +/* next functions sets buffer flags and adjusts counters accordingly */ > +static void set_done(struct v4l2_buffer *buffer) > +{ > + buffer->flags |= V4L2_BUF_FLAG_DONE; > + buffer->flags &= ~V4L2_BUF_FLAG_QUEUED; > +} > + > +static void set_queued(struct v4l2_buffer *buffer) > +{ > + buffer->flags |= V4L2_BUF_FLAG_QUEUED; > + buffer->flags &= ~V4L2_BUF_FLAG_DONE; > +} > + > +static void unset_all(struct v4l2_buffer *buffer) > +{ > + buffer->flags &= ~V4L2_BUF_FLAG_QUEUED; > + buffer->flags &= ~V4L2_BUF_FLAG_DONE; > +} > +/**************************************************************** > +**************** V4L2 ioctl caps and params calls *************** > +****************************************************************/ > +/*********************************************************************** >*******/ +/* returns device capabilities, called on VIDIOC_QUERYCAP > ioctl*/ +static int vidioc_querycap(struct file *file, > + void *priv, struct v4l2_capability *cap) > +{ > + strcpy(cap->driver, "v4l2 loopback"); > + strcpy(cap->card, "Dummy video device"); > + cap->version = 1; > + cap->capabilities = > + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | > + V4L2_CAP_READWRITE > +#ifdef YAVLD_STREAMING > + | V4L2_CAP_STREAMING > +#endif > + ; > + return 0; > +} > + > +/*********************************************************************** >*******/ +/* returns device formats, called on VIDIOC_ENUM_FMT ioctl*/ > +static int vidioc_enum_fmt_cap(struct file *file, void *fh, > + struct v4l2_fmtdesc *f) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + if (f->index) > + return -EINVAL; > + strcpy(f->description, "current format"); > + f->pixelformat = dev->pix_format.pixelformat; > + return 0; > +}; > + > +/*********************************************************************** >*******/ +/* returns current video format format fmt, called on > VIDIOC_G_FMT ioctl */ +static int vidioc_g_fmt_cap(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + fmt->fmt.pix = dev->pix_format; > + return 0; > +} > + > +/*********************************************************************** >*******/ +/* checks if it is OK to change to format fmt, called on > VIDIOC_TRY_FMT ioctl + * with v4l2_buf_type set to > V4L2_BUF_TYPE_VIDEO_CAPTURE */ > +/* actual check is done by inner_try_fmt_cap */ > +/* just checking that pixelformat is OK and set other parameters, app > should + * obey this decidion */ > +static int vidioc_try_fmt_cap(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + struct v4l2_loopback_opener *opener = file->private_data; > + opener->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + if (fmt->fmt.pix.pixelformat != dev->pix_format.pixelformat) > + return -EINVAL; > + fmt->fmt.pix = dev->pix_format; > + return 0; > +} > + > +/*********************************************************************** >*******/ +/* checks if it is OK to change to format fmt, called on > VIDIOC_TRY_FMT ioctl + * with v4l2_buf_type set to > V4L2_BUF_TYPE_VIDEO_OUTPUT */ > +/* if format is negotiated do not change it */ > +static int vidioc_try_fmt_video_output(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + struct v4l2_loopback_opener *opener = file->private_data; > + opener->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; > + /* TODO(vasaka) loopback does not care about formats writer want to > set, + * maybe it is a good idea to restrict format somehow */ > + if (dev->ready_for_capture) { > + fmt->fmt.pix = dev->pix_format; > + } else { > + if (fmt->fmt.pix.sizeimage == 0) > + return -1; > + dev->pix_format = fmt->fmt.pix; > + } > + return 0; > +}; > + > +/*********************************************************************** >*******/ +/* sets new output format, if possible, called on VIDIOC_S_FMT > ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_CAPTURE */ > +/* actually format is set by input and we even do not check it, just > return + * current one, but it is possible to set subregions of input > TODO(vasaka) */ +static int vidioc_s_fmt_cap(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + return vidioc_try_fmt_cap(file, priv, fmt); > +} > + > +/*********************************************************************** >*******/ +/* sets new output format, if possible, called on VIDIOC_S_FMT > ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_OUTPUT */ > +/* allocate data here because we do not know if it will be streaming or > + * read/write IO */ > +static int vidioc_s_fmt_video_output(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + int ret = vidioc_try_fmt_video_output(file, priv, fmt); > + if (ret < 0) > + return ret; > + if (dev->ready_for_capture == 0) { > + dev->buffer_size = PAGE_ALIGN(dev->pix_format.sizeimage); > + fmt->fmt.pix.sizeimage = dev->buffer_size; > + /* vfree on close file operation in case no open handles left */ > + dev->image = > + vmalloc(dev->buffer_size * dev->buffers_number); > + if (dev->image == NULL) > + return -EFAULT; > + dprintk("vmallocated %ld bytes\n", > + dev->buffer_size * dev->buffers_number); > + init_buffers(dev->buffer_size); > + dev->ready_for_capture = 1; > + } > + return ret; > +} > + > +/*********************************************************************** >*******/ +/*get some data flaw parameters, only capability, fps and > readbuffers has effect + *on this driver, called on VIDIOC_G_PARM*/ > +static int vidioc_g_parm(struct file *file, void *priv, > + struct v4l2_streamparm *parm) > +{ > + /* do not care about type of opener, hope this enums would always be > + * compatible */ > + parm->parm.capture = dev->capture_param; > + return 0; > +} > + > +/*********************************************************************** >*******/ +/*get some data flaw parameters, only capability, fps and > readbuffers has effect + *on this driver, called on VIDIOC_S_PARM */ > +static int vidioc_s_parm(struct file *file, void *priv, > + struct v4l2_streamparm *parm) > +{ > + dprintk("vidioc_s_parm called frate=%d/%d\n", > + parm->parm.capture.timeperframe.numerator, > + parm->parm.capture.timeperframe.denominator); > + switch (parm->type) { > + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ > + parm->parm.capture = dev->capture_param; > + return 0; > + } > + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ > + /* TODO(vasaka) do nothing now, but should set fps if > + * needed */ > + parm->parm.capture = dev->capture_param; > + return 0; > + } > + default:{ > + return -1; > + } > + } > +} > + > +/* sets a tv standart, actually we do not need to handle this any > spetial way + * added to support effecttv, can not be inline as I need > pointer to it */ +static int vidioc_s_std(struct file *file, void > *private_data, > + v4l2_std_id *norm) > +{ > + return 0; > +} > + > +/* returns set of device inputs, in our case there is only one, but > later I may + * add more, called on VIDIOC_ENUMINPUT */ > +static int vidioc_enum_input(struct file *file, void *fh, > + struct v4l2_input *inp) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + if (inp->index == 0) { > + strcpy(inp->name, "loopback"); > + inp->type = V4L2_INPUT_TYPE_CAMERA; > + inp->audioset = 0; > + inp->tuner = 0; > + inp->std = V4L2_STD_PAL_B; > + inp->status = 0; > + return 0; > + } > + return -EINVAL; > +} > + > +/* which input is currently active, called on VIDIOC_G_INPUT */ > +int vidioc_g_input(struct file *file, void *fh, unsigned int *i) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + *i = 0; > + return 0; > +} > + > +/* set input, can make sense if we have more than one video src, > + * called on VIDIOC_S_INPUT */ > +int vidioc_s_input(struct file *file, void *fh, unsigned int i) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + if (i == 0) > + return 0; > + return -EINVAL; > +} > + > +/*************************************************************** > +**************** V4L2 ioctl buffer related calls *************** > +***************************************************************/ > +/* negotiate buffer type, called on VIDIOC_REQBUFS */ > +/* only mmap streaming supported */ > +static int vidioc_reqbufs(struct file *file, void *fh, > + struct v4l2_requestbuffers *b) > +{ > + switch (b->memory) { > + case V4L2_MEMORY_MMAP:{ > + /* do nothing here, buffers are always allocated*/ > + if (b->count == 0) > + return 0; > + b->count = dev->buffers_number; > + return 0; > + } > + default:{ > + return -EINVAL; > + } > + } > +} > + > +/* returns buffer asked for, called on VIDIOC_QUERYBUF */ > +/* give app as many buffers as it wants, if it less than 100 :-), > + * but map them in our inner buffers */ > +static int vidioc_querybuf(struct file *file, void *fh, > + struct v4l2_buffer *b) > +{ > + enum v4l2_buf_type type = b->type; > + int index = b->index; > + if ((b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && > + (b->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)) { > + return -EINVAL; > + } > + if (b->index > 100) > + return -EINVAL; > + *b = dev->buffers[b->index % dev->buffers_number]; > + b->type = type; > + b->index = index; > + return 0; > +} > + > +/* put buffer to queue, called on VIDIOC_QBUF */ > +static int vidioc_qbuf(struct file *file, void *private_data, > + struct v4l2_buffer *buf) > +{ > + int index = buf->index % dev->buffers_number; > + if (buf->index > 100) > + return -EINVAL; > + switch (buf->type) { > + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ > + set_queued(&dev->buffers[index]); > + return 0; > + } > + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ > + do_gettimeofday(&dev->buffers[index].timestamp); > + set_done(&dev->buffers[index]); > + wake_up_all(&dev->read_event); > + return 0; > + } > + default:{ > + return -EINVAL; > + } > + } > +} > + > +/* put buffer to dequeue, called on VIDIOC_DQBUF */ > +static int vidioc_dqbuf(struct file *file, void *private_data, > + struct v4l2_buffer *buf) > +{ > + int index; > + struct v4l2_loopback_opener *opener = file->private_data; > + switch (buf->type) { > + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ > + if ((dev->write_position <= opener->position) && > + (file->f_flags&O_NONBLOCK)) > + return -EAGAIN; > + wait_event_interruptible(dev->read_event, > + (dev->write_position > > + opener->position)); > + if (dev->write_position > opener->position+2) > + opener->position = dev->write_position - 1; > + index = opener->position % dev->buffers_number; > + if (!(dev->buffers[index].flags&V4L2_BUF_FLAG_MAPPED)) { > + printk(KERN_INFO "v4l2-loopback: " > + "trying to g\return not mapped buf\n"); > + return -EINVAL; > + } > + ++opener->position; > + unset_all(&dev->buffers[index]); > + *buf = dev->buffers[index]; > + return 0; > + } > + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ > + index = dev->write_position % dev->buffers_number; > + unset_all(&dev->buffers[index]); > + *buf = dev->buffers[index]; > + ++dev->write_position; > + return 0; > + } > + default:{ > + return -EINVAL; > + } > + } > +} > + > +static int vidioc_streamon(struct file *file, void *private_data, > + enum v4l2_buf_type type) > +{ > + return 0; > +} > + > +static int vidioc_streamoff(struct file *file, void *private_data, > + enum v4l2_buf_type type) > +{ > + return 0; > +} > + > +#ifdef CONFIG_VIDEO_V4L1_COMPAT > +int vidiocgmbuf(struct file *file, void *fh, struct video_mbuf *p) > +{ > + p->frames = dev->buffers_number; > + p->offsets[0] = 0; > + p->offsets[1] = 0; > + p->size = dev->buffer_size; > + return 0; > +} > +#endif > +/************************************************ > +**************** file operations *************** > +************************************************/ > +static void vm_open(struct vm_area_struct *vma) > +{ > + /* TODO(vasaka) do open counter here */ > +} > + > +static void vm_close(struct vm_area_struct *vma) > +{ > + /* TODO(vasaka) do open counter here */ > +} > + > +static struct vm_operations_struct vm_ops = { > + .open = vm_open, > + .close = vm_close, > +}; > + > +static int v4l2_loopback_mmap(struct file *file, > + struct vm_area_struct *vma) > +{ > + > + struct page *page = NULL; > + > + unsigned long addr; > + unsigned long start = (unsigned long) vma->vm_start; > + unsigned long size = (unsigned long) (vma->vm_end - vma->vm_start); > + > + dprintk("entering v4l_mmap(), offset: %lu\n", vma->vm_pgoff); > + if (size > dev->buffer_size) { > + printk(KERN_INFO "v4l2-loopback: " > + "userspace tries to mmap to much, fail\n"); > + return -EINVAL; > + } > + if ((vma->vm_pgoff << PAGE_SHIFT) > > + dev->buffer_size * (dev->buffers_number - 1)) { > + printk(KERN_INFO "v4l2-loopback: " > + "userspace tries to mmap to far, fail\n"); > + return -EINVAL; > + } > + addr = (unsigned long) dev->image + (vma->vm_pgoff << PAGE_SHIFT); > + > + while (size > 0) { > + page = (void *) vmalloc_to_page((void *) addr); > + > + if (vm_insert_page(vma, start, page) < 0) > + return -EAGAIN; > + > + start += PAGE_SIZE; > + addr += PAGE_SIZE; > + size -= PAGE_SIZE; > + } > + > + vma->vm_ops = &vm_ops; > + vma->vm_private_data = 0; > + dev->buffers[(vma->vm_pgoff<<PAGE_SHIFT)/dev->buffer_size].flags |= > + V4L2_BUF_FLAG_MAPPED; > + > + vm_open(vma); > + > + dprintk("leaving v4l_mmap()\n"); > + > + return 0; > +} > + > +static unsigned int v4l2_loopback_poll(struct file *file, > + struct poll_table_struct *pts) > +{ > + struct v4l2_loopback_opener *opener = file->private_data; > + int ret_mask = 0; > + switch (opener->type) { > + case WRITER: { > + ret_mask = POLLOUT | POLLWRNORM; > + } > + case READER: { > + poll_wait(file, &dev->read_event, pts); > + if (dev->write_position > opener->position) > + ret_mask = POLLIN | POLLRDNORM; > + } > + default: { > + ret_mask = -POLLERR; > + } > + } > + return ret_mask; > +} > + > +/* do not want to limit device opens, it can be as many readers as user > want, + * writers are limited by means of setting writer field */ > +static int v4l_loopback_open(struct file *file) > +{ > + struct v4l2_loopback_opener *opener; > + dprintk("entering v4l_open()\n"); > + if (dev->open_count == V4L2_LOOPBACK_MAX_OPENERS) > + return -EBUSY; > + /* kfree on close */ > + opener = kzalloc(sizeof(*opener), GFP_KERNEL); > + if (opener == NULL) > + return -ENOMEM; > + file->private_data = opener; > + ++dev->open_count; > + return 0; > +} > + > +static int v4l_loopback_close(struct file *file) > +{ > + struct v4l2_loopback_opener *opener = file->private_data; > + dprintk("entering v4l_close()\n"); > + --dev->open_count; > + /* TODO(vasaka) does the closed file means that mmaped buffers are > + * no more valid and one can free data? */ > + if (dev->open_count == 0) { > + vfree(dev->image); > + dev->image = NULL; > + dev->ready_for_capture = 0; > + } > + kfree(opener); > + return 0; > +} > + > +static ssize_t v4l_loopback_read(struct file *file, char __user *buf, > + size_t count, loff_t *ppos) > +{ > + int read_index; > + struct v4l2_loopback_opener *opener = file->private_data; > + if ((dev->write_position <= opener->position) && > + (file->f_flags&O_NONBLOCK)) { > + return -EAGAIN; > + } > + wait_event_interruptible(dev->read_event, > + (dev->write_position > opener->position)); > + if (count > dev->buffer_size) > + count = dev->buffer_size; > + if (dev->write_position > opener->position+2) > + opener->position = dev->write_position - 1; > + read_index = opener->position % dev->buffers_number; > + if (copy_to_user((void *) buf, (void *) (dev->image + > + dev->buffers[read_index].m.offset), count)) { > + printk(KERN_INFO "v4l2-loopback: " > + "failed copy_from_user() in write buf\n"); > + return -EFAULT; > + } > + ++opener->position; > + dprintkrw("leave v4l2_loopback_read()\n"); > + return count; > +} > + > +static ssize_t v4l_loopback_write(struct file *file, > + const char __user *buf, size_t count, > + loff_t *ppos) > +{ > + int write_index = dev->write_position % dev->buffers_number; > + dprintkrw("v4l2_loopback_write() trying to write %d bytes\n", count); > + if (count > dev->buffer_size) > + count = dev->buffer_size; > + if (copy_from_user( > + (void *) (dev->image + dev->buffers[write_index].m.offset), > + (void *) buf, count)) { > + printk(KERN_INFO "v4l2-loopback: " > + "failed copy_from_user() in write buf, could not write %d\n", > + count); > + return -EFAULT; > + } > + do_gettimeofday(&dev->buffers[write_index].timestamp); > + dev->buffers[write_index].sequence = dev->write_position++; > + wake_up_all(&dev->read_event); > + dprintkrw("leave v4l2_loopback_write()\n"); > + return count; > +} > + > +/************************************************ > +**************** init functions ***************** > +************************************************/ > +/* init inner buffers, they are capture mode and flags are set as > + * for capture mod buffers */ > +static void init_buffers(int buffer_size) > +{ > + int i; > + for (i = 0; i < dev->buffers_number; ++i) { > + dev->buffers[i].bytesused = buffer_size; > + dev->buffers[i].length = buffer_size; > + dev->buffers[i].field = V4L2_FIELD_NONE; > + dev->buffers[i].flags = 0; > + dev->buffers[i].index = i; > + dev->buffers[i].input = 0; > + dev->buffers[i].m.offset = i * buffer_size; > + dev->buffers[i].memory = V4L2_MEMORY_MMAP; > + dev->buffers[i].sequence = 0; > + dev->buffers[i].timestamp.tv_sec = 0; > + dev->buffers[i].timestamp.tv_usec = 0; > + dev->buffers[i].type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > + } > + dev->write_position = 0; > +} > + > +/* fills and register video device */ > +static void init_vdev(struct video_device *vdev) > +{ > + strcpy(vdev->name, "Dummy video device"); > + vdev->tvnorms = V4L2_STD_NTSC | V4L2_STD_SECAM | V4L2_STD_PAL;/* TODO > */ + vdev->current_norm = V4L2_STD_PAL_B, /* do not know what is best > here */ + vdev->vfl_type = VFL_TYPE_GRABBER; > + vdev->fops = &v4l2_loopback_fops; > + vdev->ioctl_ops = &v4l2_loopback_ioctl_ops; > + vdev->release = &video_device_release; > + vdev->minor = -1; > +#ifdef DEBUG > + vdev->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; > +#endif > +} > + > +/* init default capture paramete, only fps may be changed in future */ > +static void init_capture_param(struct v4l2_captureparm *capture_param) > +{ > + capture_param->capability = 0; > + capture_param->capturemode = 0; > + capture_param->extendedmode = 0; > + capture_param->readbuffers = V4L2_LOOPBACK_BUFFERS_NUMBER; > + capture_param->timeperframe.numerator = 1; > + capture_param->timeperframe.denominator = 30; > +} > + > +/* init loopback main structure */ > +static int v4l2_loopback_init(struct v4l2_loopback_device *dev) > +{ > + dev->vdev = video_device_alloc(); > + if (dev->vdev == NULL) > + return -ENOMEM; > + init_vdev(dev->vdev); > + init_capture_param(&dev->capture_param); > + dev->buffers_number = V4L2_LOOPBACK_BUFFERS_NUMBER; > + dev->open_count = 0; > + dev->ready_for_capture = 0; > + dev->buffer_size = 0; > + dev->image = NULL; > + /* kfree on module release */ > + dev->buffers = > + kzalloc(sizeof(*dev->buffers) * dev->buffers_number, > + GFP_KERNEL); > + if (dev->buffers == NULL) > + return -ENOMEM; > + init_waitqueue_head(&dev->read_event); > + return 0; > +}; > + > +/*********************************************** > +**************** LINUX KERNEL **************** > +************************************************/ > +static const struct v4l2_file_operations v4l2_loopback_fops = { > + .owner = THIS_MODULE, > + .open = v4l_loopback_open, > + .release = v4l_loopback_close, > + .read = v4l_loopback_read, > + .write = v4l_loopback_write, > + .poll = v4l2_loopback_poll, > + .mmap = v4l2_loopback_mmap, > + .ioctl = video_ioctl2, > +}; > + > +static const struct v4l2_ioctl_ops v4l2_loopback_ioctl_ops = { > + .vidioc_querycap = &vidioc_querycap, > + .vidioc_enum_fmt_vid_cap = &vidioc_enum_fmt_cap, > + .vidioc_enum_input = &vidioc_enum_input, > + .vidioc_g_input = &vidioc_g_input, > + .vidioc_s_input = &vidioc_s_input, > + .vidioc_g_fmt_vid_cap = &vidioc_g_fmt_cap, > + .vidioc_s_fmt_vid_cap = &vidioc_s_fmt_cap, > + .vidioc_s_fmt_vid_out = &vidioc_s_fmt_video_output, > + .vidioc_try_fmt_vid_cap = &vidioc_try_fmt_cap, > + .vidioc_try_fmt_vid_out = &vidioc_try_fmt_video_output, > + .vidioc_s_std = &vidioc_s_std, > + .vidioc_g_parm = &vidioc_g_parm, > + .vidioc_s_parm = &vidioc_s_parm, > + .vidioc_reqbufs = &vidioc_reqbufs, > + .vidioc_querybuf = &vidioc_querybuf, > + .vidioc_qbuf = &vidioc_qbuf, > + .vidioc_dqbuf = &vidioc_dqbuf, > + .vidioc_streamon = &vidioc_streamon, > + .vidioc_streamoff = &vidioc_streamoff, > +#ifdef CONFIG_VIDEO_V4L1_COMPAT > + .vidiocgmbuf = &vidiocgmbuf, > +#endif > +}; > + > +int __init init_module() > +{ > + int ret; > + dprintk("entering init_module()\n"); > + /* kfree on module release */ > + dev = kzalloc(sizeof(*dev), GFP_KERNEL); > + if (dev == NULL) > + return -ENOMEM; > + ret = v4l2_loopback_init(dev); > + if (ret < 0) > + return ret; > + /* register the device -> it creates /dev/video* */ > + if (video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1) < 0) { > + video_device_release(dev->vdev); > + printk(KERN_INFO "failed video_register_device()\n"); > + return -EFAULT; > + } > + printk(KERN_INFO "v4l2-loopback module installed\n"); > + return 0; > +} > + > +void __exit cleanup_module() > +{ > + dprintk("entering cleanup_module()\n"); > + /* unregister the device -> it deletes /dev/video* */ > + video_unregister_device(dev->vdev); > + kfree(dev->buffers); > + kfree(dev); > + printk(KERN_INFO "v4l2-loopback module removed\n"); > +} > + > + > +MODULE_DESCRIPTION("V4L2 loopback video device"); > +MODULE_VERSION("0.1.0"); > +MODULE_AUTHOR("Vasily Levin"); > +MODULE_LICENSE("GPL"); > diff -uprN v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.h > v4l-dvb.my/linux/drivers/media/video/v4l2loopback.h --- > v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.h 1970-01-01 > 03:00:00.000000000 +0300 +++ > v4l-dvb.my/linux/drivers/media/video/v4l2loopback.h 2009-03-24 > 18:21:58.000000000 +0200 @@ -0,0 +1,58 @@ > +/* > + * v4l2loopback.h -- video 4 linux loopback driver > + * > + * Copyright (C) 2005-2009 > + * Vasily Levin (vasaka@gmail.com) > + * > + * This program is free software; you can redistribute it and/or > modify + * it under the terms of the GNU General Public License as > published by + * the Free Software Foundation; either version 2 of > the License, or + * (at your option) any later version. > + * > + */ > + > +#ifndef _V4L2LOOPBACK_H > +#define _V4L2LOOPBACK_H > + > +#include <linux/videodev2.h> > +#include <media/v4l2-common.h> > + /* fixed inner buffers number */ > +/* TODO(vasaka) make this module parameter */ > +#define V4L2_LOOPBACK_BUFFERS_NUMBER 4 > +#define V4L2_LOOPBACK_MAX_OPENERS 10 > + > +/* TODO(vasaka) use typenames which are common to kernel, but first find > out if + * it is needed */ > +/* struct keeping state and settings of loopback device */ > +struct v4l2_loopback_device { > + struct video_device *vdev; > + /* pixel and stream format */ > + struct v4l2_pix_format pix_format; > + struct v4l2_captureparm capture_param; > + /* buffers stuff */ > + __u8 *image; /* pointer to actual buffers data */ > + int buffers_number; /* should not be big, 4 is a good choise */ > + struct v4l2_buffer *buffers; /* inner driver buffers */ > + int write_position; /* number of last written frame + 1 */ > + long buffer_size; > + /* sync stuff */ > + int open_count; > + int ready_for_capture;/* set to true when at least one writer opened > + * device and negotiated format */ > + wait_queue_head_t read_event; > +}; > +/* types of opener shows what opener wants to do with loopback */ > +enum opener_type { > + UNNEGOTIATED = 0, > + READER = 1, > + WRITER = 2, > +}; > +/* struct keeping state and type of opener */ > +struct v4l2_loopback_opener { > + enum opener_type type; > + int buffers_number; > + int position; /* number of last processed frame + 1 or > + * write_position - 1 if reader went out of sinc */ > + struct v4l2_buffer *buffers; > +}; > +#endif /* _V4L2LOOPBACK_H */ > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Apr 13, 2009 at 2:17 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote: > On Thursday 26 March 2009 19:49:10 Vasily wrote: >> Hello, please review the new version of v4l2 loopback driver. >> I fixed up comments to the previous submission, waiting for the new ones >> :-), reposting for patchwork tool >> >> --- >> This patch introduces v4l2 loopback module >> >> From: Vasily Levin <vasaka@gmail.com> >> >> This is v4l2 loopback driver which can be used to make available any >> userspace video as v4l2 device. Initialy it was written to make >> videoeffects available to Skype, but in fact it have many more uses. > > Hi Vasily, > > It's still on my todo list, but I have had very little time. If you still > haven't seen a review in two weeks time, then please send me a reminder. > > Sorry about this, normally I review things like this much sooner but it has > been very hectic lately. > > Regards, > >     Hans Hi Hans, Thanks for updating, driver is still waiting for review, I am glad to here that it is on a todo list :-) Vasily -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 14 Apr 2009 04:08:41 +0300 vasaka@gmail.com wrote: > On Mon, Apr 13, 2009 at 2:17 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote: > > On Thursday 26 March 2009 19:49:10 Vasily wrote: > >> Hello, please review the new version of v4l2 loopback driver. > >> I fixed up comments to the previous submission, waiting for the new ones > >> :-), reposting for patchwork tool > >> > >> --- > >> This patch introduces v4l2 loopback module > >> > >> From: Vasily Levin <vasaka@gmail.com> > >> > >> This is v4l2 loopback driver which can be used to make available any > >> userspace video as v4l2 device. Initialy it was written to make > >> videoeffects available to Skype, but in fact it have many more uses. > > > > Hi Vasily, > > > > It's still on my todo list, but I have had very little time. If you still > > haven't seen a review in two weeks time, then please send me a reminder. > > > > Sorry about this, normally I review things like this much sooner but it has > > been very hectic lately. > > > > Regards, > > > >     Hans > > Hi Hans, > > Thanks for updating, driver is still waiting for review, I am glad to > here that it is on a todo list :-) Vasily, It is on my todo list. I've postponed it since it is valuable to have some discussions about this driver. The issue I see is that the V4L drivers are meant to support real devices. This driver that is a loopback for some userspace driver. I don't discuss its value for testing purposes or other random usage, but I can't see why this should be at upstream kernel. So, I'm considering to add it at v4l-dvb tree, but as an out-of-tree driver only. For this to happen, probably, we'll need a few adjustments at v4l build. Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 14, 2009 at 3:12 PM, Mauro Carvalho Chehab <mchehab@infradead.org> wrote: > On Tue, 14 Apr 2009 04:08:41 +0300 > vasaka@gmail.com wrote: > >> On Mon, Apr 13, 2009 at 2:17 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote: >> > On Thursday 26 March 2009 19:49:10 Vasily wrote: >> >> Hello, please review the new version of v4l2 loopback driver. >> >> I fixed up comments to the previous submission, waiting for the new ones >> >> :-), reposting for patchwork tool >> >> >> >> --- >> >> This patch introduces v4l2 loopback module >> >> >> >> From: Vasily Levin <vasaka@gmail.com> >> >> >> >> This is v4l2 loopback driver which can be used to make available any >> >> userspace video as v4l2 device. Initialy it was written to make >> >> videoeffects available to Skype, but in fact it have many more uses. >> > >> > Hi Vasily, >> > >> > It's still on my todo list, but I have had very little time. If you still >> > haven't seen a review in two weeks time, then please send me a reminder. >> > >> > Sorry about this, normally I review things like this much sooner but it has >> > been very hectic lately. >> > >> > Regards, >> > >> >     Hans >> >> Hi Hans, >> >> Thanks for updating, driver is still waiting for review, I am glad to >> here that it is on a todo list :-) > > Vasily, > > It is on my todo list. I've postponed it since it is valuable to have some > discussions about this driver. > > The issue I see is that the V4L drivers are meant to support real devices. This > driver that is a loopback for some userspace driver. I don't discuss its value > for testing purposes or other random usage, but I can't see why this should be > at upstream kernel. > > So, I'm considering to add it at v4l-dvb tree, but as an out-of-tree driver > only. For this to happen, probably, we'll need a few adjustments at v4l build. > > Cheers, > Mauro > Mauro, ok, let it be out-of -tree driver, this is also good as I do not have to adapt the driver to each new kernel, but I want to argue alittle about Inclusion of the driver into upstream kernel. Main reason for inclusion to the kernel is ease of use, as I understand installing the out-of-tree driver for some kernel needs downloading of the whole v4l-dvb tree(am I right?). Loopback gives one opportunities to do many fun things with video streams and when it needs just one step to begin using it chances that someone will do something useful with the driver are higher. Awareness that there is such thing as loopback is also. If the driver is in upstream tree - more people will see it and more chances that more people will participate in loopback getiing better. vivi is an upstream driver :-) Vasily -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 14 Apr 2009 15:53:00 +0300 vasaka@gmail.com wrote: > On Tue, Apr 14, 2009 at 3:12 PM, Mauro Carvalho Chehab > <mchehab@infradead.org> wrote: > > > The issue I see is that the V4L drivers are meant to support real devices. This > > driver that is a loopback for some userspace driver. I don't discuss its value > > for testing purposes or other random usage, but I can't see why this should be > > at upstream kernel. > > > > So, I'm considering to add it at v4l-dvb tree, but as an out-of-tree driver > > only. For this to happen, probably, we'll need a few adjustments at v4l build. > > > > Cheers, > > Mauro > > > > Mauro, > > ok, let it be out-of -tree driver, this is also good as I do not have > to adapt the driver to each new kernel, but I want to argue alittle > about Inclusion of the driver into upstream kernel. > > Main reason for inclusion to the kernel is ease of use, as I > understand installing the out-of-tree driver for some kernel needs > downloading of the whole v4l-dvb tree(am I right?). > > Loopback gives one opportunities to do many fun things with video > streams and when it needs just one step to begin using it chances that > someone will do something useful with the driver are higher. > I, as a target user of vloopback, agree that having it in mainline would be really handy. Think that with a stable vloopback solution, with device detection and parameter setting, we can really make PTP digicams as webcams[1] useful, right now this is tricky and very uncomfortable on kernel update. > Awareness that there is such thing as loopback is also. If the driver > is in upstream tree - more people will see it and more chances that > more people will participate in loopback getiing better. > > vivi is an upstream driver :-) > Even vivi can be seen as a particular case of a vloopback device, can't it? Regards, Antonio [1] http://shell.studenti.unina.it/~ospite/section/it/dev/canoncam.html#English
On Tue, 14 Apr 2009 16:04:50 +0200 Antonio Ospite <ospite@studenti.unina.it> wrote: > On Tue, 14 Apr 2009 15:53:00 +0300 > vasaka@gmail.com wrote: > > > On Tue, Apr 14, 2009 at 3:12 PM, Mauro Carvalho Chehab > > <mchehab@infradead.org> wrote: > > > > > The issue I see is that the V4L drivers are meant to support real devices. This > > > driver that is a loopback for some userspace driver. I don't discuss its value > > > for testing purposes or other random usage, but I can't see why this should be > > > at upstream kernel. > > > > > > So, I'm considering to add it at v4l-dvb tree, but as an out-of-tree driver > > > only. For this to happen, probably, we'll need a few adjustments at v4l build. > > > > > > Cheers, > > > Mauro > > > > > > > Mauro, > > > > ok, let it be out-of -tree driver, this is also good as I do not have > > to adapt the driver to each new kernel, but I want to argue alittle > > about Inclusion of the driver into upstream kernel. > > > > Main reason for inclusion to the kernel is ease of use, as I > > understand installing the out-of-tree driver for some kernel needs > > downloading of the whole v4l-dvb tree(am I right?). > > > > Loopback gives one opportunities to do many fun things with video > > streams and when it needs just one step to begin using it chances that > > someone will do something useful with the driver are higher. > > > > I, as a target user of vloopback, agree that having it in mainline > would be really handy. Think that with a stable vloopback solution, > with device detection and parameter setting, we can really make PTP > digicams as webcams[1] useful, right now this is tricky and very > uncomfortable on kernel update. This is, in fact, a good reason why we shouldn't add it upstream: instead of adding proper V4L interface to PTP and other similar stuff, people could just do some userspace hack with a in-kernel loopback (or even worse: work against Open Source community, by writing binary-only drivers), and use the loopback to make it work with existing applications (ok, there are other forms to provide such things, but we shouldn't make it even easier). I can see the value of a video loopback for development and tests, but those people could easily download some tree with the video loopback driver and use it. > > Awareness that there is such thing as loopback is also. If the driver > > is in upstream tree - more people will see it and more chances that > > more people will participate in loopback getiing better. I'm afraid not. The contributions we generally receive on other drivers from developers that don't participate on v4l-dvb community are generally just API fixups and new board additions. In fact, the people that can help with this driver will be already developing using v4l-dvb tree, so, I doubt you'll have more contributions by having it on kernel. > > vivi is an upstream driver :-) > > > > Even vivi can be seen as a particular case of a vloopback device, can't > it? Vivi is just a driver skeleton. It could eventually be removed from upstream, without any real damage. Yet, it is the easiest way for a video app developer to test their driver. Also, vivi is very useful to test newer core improvements, before actually damag^Wchanging the internal API's at the real drivers. I used it with this objective during video_ioctl2() callback changes, during videobuf split into a core and a helper module, and on other similar situations. On the other hand, It is dubious that a distro would provide a kernel with this module enabled. So, even being at the kernel tree, for you to use it, you'll need to download the kernel and compile it by hand, or use v4l-dvb (it is the same case of the DVB dummy frontend, for example). Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Sorry for the delay, but here is my review: On Thursday 26 March 2009 19:49:10 Vasily wrote: > Hello, please review the new version of v4l2 loopback driver. > I fixed up comments to the previous submission, waiting for the new ones :-), > reposting for patchwork tool > > --- > This patch introduces v4l2 loopback module > > From: Vasily Levin <vasaka@gmail.com> > > This is v4l2 loopback driver which can be used to make available any userspace > video as v4l2 device. Initialy it was written to make videoeffects available > to Skype, but in fact it have many more uses. > > Priority: normal > > Signed-off-by: Vasily Levin <vasaka@gmail.com> > > diff -uprN v4l-dvb.orig/linux/drivers/media/video/Kconfig v4l-dvb.my/linux/drivers/media/video/Kconfig > --- v4l-dvb.orig/linux/drivers/media/video/Kconfig 2009-03-21 07:08:06.000000000 +0200 > +++ v4l-dvb.my/linux/drivers/media/video/Kconfig 2009-03-25 23:36:13.000000000 +0200 > @@ -465,6 +465,13 @@ config VIDEO_VIVI > Say Y here if you want to test video apps or debug V4L devices. > In doubt, say N. > > +config VIDEO_V4L2_LOOPBACK > + tristate "v4l2 loopback driver" > + depends on VIDEO_V4L2 && VIDEO_DEV > + help > + Say Y if you want to use v4l2 loopback driver. > + This driver can be compiled as a module, called v4l2loopback. > + > source "drivers/media/video/bt8xx/Kconfig" > > config VIDEO_SAA6588 > diff -uprN v4l-dvb.orig/linux/drivers/media/video/Makefile v4l-dvb.my/linux/drivers/media/video/Makefile > --- v4l-dvb.orig/linux/drivers/media/video/Makefile 2009-03-21 07:08:06.000000000 +0200 > +++ v4l-dvb.my/linux/drivers/media/video/Makefile 2009-03-24 12:54:59.000000000 +0200 > @@ -132,6 +132,7 @@ obj-$(CONFIG_VIDEO_IVTV) += ivtv/ > obj-$(CONFIG_VIDEO_CX18) += cx18/ > > obj-$(CONFIG_VIDEO_VIVI) += vivi.o > +obj-$(CONFIG_VIDEO_V4L2_LOOPBACK) += v4l2loopback.o > obj-$(CONFIG_VIDEO_CX23885) += cx23885/ > > obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o > diff -uprN v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.c v4l-dvb.my/linux/drivers/media/video/v4l2loopback.c > --- v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.c 1970-01-01 03:00:00.000000000 +0300 > +++ v4l-dvb.my/linux/drivers/media/video/v4l2loopback.c 2009-03-25 23:01:35.000000000 +0200 > @@ -0,0 +1,725 @@ > +/* > + * v4l2loopback.c -- video 4 linux loopback driver > + * > + * Copyright (C) 2005-2009 > + * Vasily Levin (vasaka@gmail.com) > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + */ > +#include <linux/version.h> > +#include <linux/vmalloc.h> > +#include <linux/mm.h> > +#include <linux/time.h> > +#include <linux/module.h> > +#include <media/v4l2-ioctl.h> > +#include "v4l2loopback.h" > + > +/* #define DEBUG > +#define DEBUG_RW */ > +#define YAVLD_STREAMING > + > +#ifdef DEBUG > +#define dprintk(fmt, args...)\ > + do {\ > + printk(KERN_INFO "v4l2-loopback: " fmt, ##args);\ > + } while (0) > +#else > +#define dprintk(fmt, args...) > +#endif > + > +#ifdef DEBUG_RW > +#define dprintkrw(fmt, args...)\ > + do {\ > + printk(KERN_INFO "v4l2-loopback: " fmt, ##args);\ > + } while (0) > +#else > +#define dprintkrw(fmt, args...) > +#endif It's better to use a debug module option instead. > + > +/* global module data */ > +struct v4l2_loopback_device *dev; > +/* forward declarations */ > +static void init_buffers(int buffer_size); > +static const struct v4l2_file_operations v4l2_loopback_fops; > +static const struct v4l2_ioctl_ops v4l2_loopback_ioctl_ops; > +/**************************************************************** > +**************** my queue helpers ******************************* > +****************************************************************/ Please avoid using such comment blocks. Just write: /* Queue helpers */ That's sufficient. > +/* next functions sets buffer flags and adjusts counters accordingly */ > +static void set_done(struct v4l2_buffer *buffer) > +{ > + buffer->flags |= V4L2_BUF_FLAG_DONE; > + buffer->flags &= ~V4L2_BUF_FLAG_QUEUED; > +} > + > +static void set_queued(struct v4l2_buffer *buffer) > +{ > + buffer->flags |= V4L2_BUF_FLAG_QUEUED; > + buffer->flags &= ~V4L2_BUF_FLAG_DONE; > +} > + > +static void unset_all(struct v4l2_buffer *buffer) > +{ > + buffer->flags &= ~V4L2_BUF_FLAG_QUEUED; > + buffer->flags &= ~V4L2_BUF_FLAG_DONE; > +} > +/**************************************************************** > +**************** V4L2 ioctl caps and params calls *************** > +****************************************************************/ > +/******************************************************************************/ > +/* returns device capabilities, called on VIDIOC_QUERYCAP ioctl*/ > +static int vidioc_querycap(struct file *file, > + void *priv, struct v4l2_capability *cap) > +{ > + strcpy(cap->driver, "v4l2 loopback"); > + strcpy(cap->card, "Dummy video device"); > + cap->version = 1; > + cap->capabilities = > + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | > + V4L2_CAP_READWRITE > +#ifdef YAVLD_STREAMING > + | V4L2_CAP_STREAMING > +#endif > + ; > + return 0; > +} > + > +/******************************************************************************/ Besides the fact that it is longer than 80 characters, these comment lines do not add anything. Just remove them. > +/* returns device formats, called on VIDIOC_ENUM_FMT ioctl*/ > +static int vidioc_enum_fmt_cap(struct file *file, void *fh, > + struct v4l2_fmtdesc *f) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + if (f->index) > + return -EINVAL; > + strcpy(f->description, "current format"); Please use strlcpy. It's safer. > + f->pixelformat = dev->pix_format.pixelformat; > + return 0; > +}; > + > +/******************************************************************************/ > +/* returns current video format format fmt, called on VIDIOC_G_FMT ioctl */ > +static int vidioc_g_fmt_cap(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + fmt->fmt.pix = dev->pix_format; > + return 0; > +} > + > +/******************************************************************************/ > +/* checks if it is OK to change to format fmt, called on VIDIOC_TRY_FMT ioctl > + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_CAPTURE */ > +/* actual check is done by inner_try_fmt_cap */ > +/* just checking that pixelformat is OK and set other parameters, app should > + * obey this decidion */ > +static int vidioc_try_fmt_cap(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + struct v4l2_loopback_opener *opener = file->private_data; Add empty line after declaring local variables. > + opener->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + if (fmt->fmt.pix.pixelformat != dev->pix_format.pixelformat) > + return -EINVAL; > + fmt->fmt.pix = dev->pix_format; > + return 0; > +} > + > +/******************************************************************************/ > +/* checks if it is OK to change to format fmt, called on VIDIOC_TRY_FMT ioctl > + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_OUTPUT */ > +/* if format is negotiated do not change it */ > +static int vidioc_try_fmt_video_output(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + struct v4l2_loopback_opener *opener = file->private_data; > + opener->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; ??? This does not match what is in v4l2loopback.h. > + /* TODO(vasaka) loopback does not care about formats writer want to set, > + * maybe it is a good idea to restrict format somehow */ > + if (dev->ready_for_capture) { > + fmt->fmt.pix = dev->pix_format; > + } else { > + if (fmt->fmt.pix.sizeimage == 0) > + return -1; > + dev->pix_format = fmt->fmt.pix; > + } > + return 0; > +}; > + > +/******************************************************************************/ > +/* sets new output format, if possible, called on VIDIOC_S_FMT ioctl > + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_CAPTURE */ > +/* actually format is set by input and we even do not check it, just return > + * current one, but it is possible to set subregions of input TODO(vasaka) */ > +static int vidioc_s_fmt_cap(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + return vidioc_try_fmt_cap(file, priv, fmt); > +} > + > +/******************************************************************************/ > +/* sets new output format, if possible, called on VIDIOC_S_FMT ioctl > + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_OUTPUT */ > +/* allocate data here because we do not know if it will be streaming or > + * read/write IO */ Hmm. Wouldn't it be better to postpone allocating memory until either write or streamon is called? This call also doesn't handle the case were the application called this more than once with different pixel formats. > +static int vidioc_s_fmt_video_output(struct file *file, > + void *priv, struct v4l2_format *fmt) > +{ > + int ret = vidioc_try_fmt_video_output(file, priv, fmt); > + if (ret < 0) > + return ret; > + if (dev->ready_for_capture == 0) { > + dev->buffer_size = PAGE_ALIGN(dev->pix_format.sizeimage); > + fmt->fmt.pix.sizeimage = dev->buffer_size; > + /* vfree on close file operation in case no open handles left */ > + dev->image = > + vmalloc(dev->buffer_size * dev->buffers_number); > + if (dev->image == NULL) > + return -EFAULT; > + dprintk("vmallocated %ld bytes\n", > + dev->buffer_size * dev->buffers_number); > + init_buffers(dev->buffer_size); > + dev->ready_for_capture = 1; > + } > + return ret; > +} > + > +/******************************************************************************/ > +/*get some data flaw parameters, only capability, fps and readbuffers has effect > + *on this driver, called on VIDIOC_G_PARM*/ > +static int vidioc_g_parm(struct file *file, void *priv, > + struct v4l2_streamparm *parm) > +{ > + /* do not care about type of opener, hope this enums would always be > + * compatible */ > + parm->parm.capture = dev->capture_param; > + return 0; > +} > + > +/******************************************************************************/ > +/*get some data flaw parameters, only capability, fps and readbuffers has effect > + *on this driver, called on VIDIOC_S_PARM */ > +static int vidioc_s_parm(struct file *file, void *priv, > + struct v4l2_streamparm *parm) > +{ > + dprintk("vidioc_s_parm called frate=%d/%d\n", > + parm->parm.capture.timeperframe.numerator, > + parm->parm.capture.timeperframe.denominator); > + switch (parm->type) { > + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ > + parm->parm.capture = dev->capture_param; > + return 0; > + } > + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ > + /* TODO(vasaka) do nothing now, but should set fps if > + * needed */ > + parm->parm.capture = dev->capture_param; > + return 0; > + } > + default:{ > + return -1; > + } > + } > +} > + > +/* sets a tv standart, actually we do not need to handle this any spetial way typos: standard, special. > + * added to support effecttv, can not be inline as I need pointer to it */ > +static int vidioc_s_std(struct file *file, void *private_data, > + v4l2_std_id *norm) > +{ > + return 0; > +} > + > +/* returns set of device inputs, in our case there is only one, but later I may > + * add more, called on VIDIOC_ENUMINPUT */ > +static int vidioc_enum_input(struct file *file, void *fh, > + struct v4l2_input *inp) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; > + if (inp->index == 0) { > + strcpy(inp->name, "loopback"); strlcpy. > + inp->type = V4L2_INPUT_TYPE_CAMERA; > + inp->audioset = 0; > + inp->tuner = 0; > + inp->std = V4L2_STD_PAL_B; STD_ALL is probably more appropriate. > + inp->status = 0; > + return 0; > + } > + return -EINVAL; > +} > + > +/* which input is currently active, called on VIDIOC_G_INPUT */ > +int vidioc_g_input(struct file *file, void *fh, unsigned int *i) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; The 'ready_for_capture' test is unnecessary. > + *i = 0; > + return 0; > +} > + > +/* set input, can make sense if we have more than one video src, > + * called on VIDIOC_S_INPUT */ > +int vidioc_s_input(struct file *file, void *fh, unsigned int i) > +{ > + if (dev->ready_for_capture == 0) > + return -EINVAL; Ditto. > + if (i == 0) > + return 0; > + return -EINVAL; > +} > + > +/*************************************************************** > +**************** V4L2 ioctl buffer related calls *************** > +***************************************************************/ > +/* negotiate buffer type, called on VIDIOC_REQBUFS */ > +/* only mmap streaming supported */ > +static int vidioc_reqbufs(struct file *file, void *fh, > + struct v4l2_requestbuffers *b) > +{ > + switch (b->memory) { > + case V4L2_MEMORY_MMAP:{ > + /* do nothing here, buffers are always allocated*/ > + if (b->count == 0) > + return 0; > + b->count = dev->buffers_number; > + return 0; > + } > + default:{ > + return -EINVAL; > + } > + } > +} > + > +/* returns buffer asked for, called on VIDIOC_QUERYBUF */ > +/* give app as many buffers as it wants, if it less than 100 :-), > + * but map them in our inner buffers */ > +static int vidioc_querybuf(struct file *file, void *fh, > + struct v4l2_buffer *b) > +{ > + enum v4l2_buf_type type = b->type; > + int index = b->index; > + if ((b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && > + (b->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)) { > + return -EINVAL; > + } > + if (b->index > 100) > + return -EINVAL; > + *b = dev->buffers[b->index % dev->buffers_number]; > + b->type = type; > + b->index = index; > + return 0; > +} > + > +/* put buffer to queue, called on VIDIOC_QBUF */ > +static int vidioc_qbuf(struct file *file, void *private_data, > + struct v4l2_buffer *buf) > +{ > + int index = buf->index % dev->buffers_number; > + if (buf->index > 100) > + return -EINVAL; > + switch (buf->type) { > + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ > + set_queued(&dev->buffers[index]); > + return 0; > + } > + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ > + do_gettimeofday(&dev->buffers[index].timestamp); > + set_done(&dev->buffers[index]); > + wake_up_all(&dev->read_event); > + return 0; > + } > + default:{ > + return -EINVAL; > + } > + } > +} > + > +/* put buffer to dequeue, called on VIDIOC_DQBUF */ > +static int vidioc_dqbuf(struct file *file, void *private_data, > + struct v4l2_buffer *buf) > +{ > + int index; > + struct v4l2_loopback_opener *opener = file->private_data; > + switch (buf->type) { > + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ There are no local variables inside this case, so there is no need for the curly brackets. > + if ((dev->write_position <= opener->position) && > + (file->f_flags&O_NONBLOCK)) > + return -EAGAIN; > + wait_event_interruptible(dev->read_event, > + (dev->write_position > > + opener->position)); > + if (dev->write_position > opener->position+2) > + opener->position = dev->write_position - 1; > + index = opener->position % dev->buffers_number; > + if (!(dev->buffers[index].flags&V4L2_BUF_FLAG_MAPPED)) { > + printk(KERN_INFO "v4l2-loopback: " > + "trying to g\return not mapped buf\n"); > + return -EINVAL; > + } > + ++opener->position; > + unset_all(&dev->buffers[index]); > + *buf = dev->buffers[index]; > + return 0; > + } > + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ > + index = dev->write_position % dev->buffers_number; > + unset_all(&dev->buffers[index]); > + *buf = dev->buffers[index]; > + ++dev->write_position; > + return 0; > + } > + default:{ > + return -EINVAL; > + } > + } > +} > + > +static int vidioc_streamon(struct file *file, void *private_data, > + enum v4l2_buf_type type) > +{ > + return 0; > +} > + > +static int vidioc_streamoff(struct file *file, void *private_data, > + enum v4l2_buf_type type) > +{ > + return 0; > +} > + > +#ifdef CONFIG_VIDEO_V4L1_COMPAT > +int vidiocgmbuf(struct file *file, void *fh, struct video_mbuf *p) > +{ > + p->frames = dev->buffers_number; > + p->offsets[0] = 0; > + p->offsets[1] = 0; > + p->size = dev->buffer_size; > + return 0; > +} > +#endif > +/************************************************ > +**************** file operations *************** > +************************************************/ > +static void vm_open(struct vm_area_struct *vma) > +{ > + /* TODO(vasaka) do open counter here */ > +} > + > +static void vm_close(struct vm_area_struct *vma) > +{ > + /* TODO(vasaka) do open counter here */ > +} > + > +static struct vm_operations_struct vm_ops = { > + .open = vm_open, > + .close = vm_close, > +}; > + > +static int v4l2_loopback_mmap(struct file *file, > + struct vm_area_struct *vma) > +{ > + > + struct page *page = NULL; > + > + unsigned long addr; > + unsigned long start = (unsigned long) vma->vm_start; > + unsigned long size = (unsigned long) (vma->vm_end - vma->vm_start); > + > + dprintk("entering v4l_mmap(), offset: %lu\n", vma->vm_pgoff); > + if (size > dev->buffer_size) { > + printk(KERN_INFO "v4l2-loopback: " > + "userspace tries to mmap to much, fail\n"); > + return -EINVAL; > + } > + if ((vma->vm_pgoff << PAGE_SHIFT) > > + dev->buffer_size * (dev->buffers_number - 1)) { > + printk(KERN_INFO "v4l2-loopback: " > + "userspace tries to mmap to far, fail\n"); > + return -EINVAL; > + } > + addr = (unsigned long) dev->image + (vma->vm_pgoff << PAGE_SHIFT); > + > + while (size > 0) { > + page = (void *) vmalloc_to_page((void *) addr); > + > + if (vm_insert_page(vma, start, page) < 0) > + return -EAGAIN; > + > + start += PAGE_SIZE; > + addr += PAGE_SIZE; > + size -= PAGE_SIZE; > + } > + > + vma->vm_ops = &vm_ops; > + vma->vm_private_data = 0; > + dev->buffers[(vma->vm_pgoff<<PAGE_SHIFT)/dev->buffer_size].flags |= > + V4L2_BUF_FLAG_MAPPED; > + > + vm_open(vma); > + > + dprintk("leaving v4l_mmap()\n"); > + > + return 0; > +} > + > +static unsigned int v4l2_loopback_poll(struct file *file, > + struct poll_table_struct *pts) > +{ > + struct v4l2_loopback_opener *opener = file->private_data; > + int ret_mask = 0; > + switch (opener->type) { > + case WRITER: { > + ret_mask = POLLOUT | POLLWRNORM; > + } > + case READER: { > + poll_wait(file, &dev->read_event, pts); > + if (dev->write_position > opener->position) > + ret_mask = POLLIN | POLLRDNORM; > + } > + default: { > + ret_mask = -POLLERR; > + } > + } > + return ret_mask; > +} > + > +/* do not want to limit device opens, it can be as many readers as user want, > + * writers are limited by means of setting writer field */ > +static int v4l_loopback_open(struct file *file) > +{ > + struct v4l2_loopback_opener *opener; > + dprintk("entering v4l_open()\n"); > + if (dev->open_count == V4L2_LOOPBACK_MAX_OPENERS) > + return -EBUSY; > + /* kfree on close */ > + opener = kzalloc(sizeof(*opener), GFP_KERNEL); > + if (opener == NULL) > + return -ENOMEM; > + file->private_data = opener; > + ++dev->open_count; Should be of atomic_t type. > + return 0; > +} > + > +static int v4l_loopback_close(struct file *file) > +{ > + struct v4l2_loopback_opener *opener = file->private_data; > + dprintk("entering v4l_close()\n"); > + --dev->open_count; > + /* TODO(vasaka) does the closed file means that mmaped buffers are > + * no more valid and one can free data? */ > + if (dev->open_count == 0) { > + vfree(dev->image); > + dev->image = NULL; > + dev->ready_for_capture = 0; > + } > + kfree(opener); > + return 0; > +} > + > +static ssize_t v4l_loopback_read(struct file *file, char __user *buf, > + size_t count, loff_t *ppos) > +{ > + int read_index; > + struct v4l2_loopback_opener *opener = file->private_data; > + if ((dev->write_position <= opener->position) && > + (file->f_flags&O_NONBLOCK)) { > + return -EAGAIN; > + } > + wait_event_interruptible(dev->read_event, > + (dev->write_position > opener->position)); > + if (count > dev->buffer_size) > + count = dev->buffer_size; > + if (dev->write_position > opener->position+2) > + opener->position = dev->write_position - 1; > + read_index = opener->position % dev->buffers_number; > + if (copy_to_user((void *) buf, (void *) (dev->image + > + dev->buffers[read_index].m.offset), count)) { > + printk(KERN_INFO "v4l2-loopback: " > + "failed copy_from_user() in write buf\n"); > + return -EFAULT; > + } > + ++opener->position; > + dprintkrw("leave v4l2_loopback_read()\n"); > + return count; > +} > + > +static ssize_t v4l_loopback_write(struct file *file, > + const char __user *buf, size_t count, > + loff_t *ppos) > +{ > + int write_index = dev->write_position % dev->buffers_number; > + dprintkrw("v4l2_loopback_write() trying to write %d bytes\n", count); > + if (count > dev->buffer_size) > + count = dev->buffer_size; > + if (copy_from_user( > + (void *) (dev->image + dev->buffers[write_index].m.offset), > + (void *) buf, count)) { > + printk(KERN_INFO "v4l2-loopback: " > + "failed copy_from_user() in write buf, could not write %d\n", > + count); > + return -EFAULT; > + } > + do_gettimeofday(&dev->buffers[write_index].timestamp); > + dev->buffers[write_index].sequence = dev->write_position++; > + wake_up_all(&dev->read_event); > + dprintkrw("leave v4l2_loopback_write()\n"); > + return count; > +} > + > +/************************************************ > +**************** init functions ***************** > +************************************************/ > +/* init inner buffers, they are capture mode and flags are set as > + * for capture mod buffers */ > +static void init_buffers(int buffer_size) > +{ > + int i; > + for (i = 0; i < dev->buffers_number; ++i) { > + dev->buffers[i].bytesused = buffer_size; > + dev->buffers[i].length = buffer_size; > + dev->buffers[i].field = V4L2_FIELD_NONE; > + dev->buffers[i].flags = 0; > + dev->buffers[i].index = i; > + dev->buffers[i].input = 0; > + dev->buffers[i].m.offset = i * buffer_size; > + dev->buffers[i].memory = V4L2_MEMORY_MMAP; > + dev->buffers[i].sequence = 0; > + dev->buffers[i].timestamp.tv_sec = 0; > + dev->buffers[i].timestamp.tv_usec = 0; > + dev->buffers[i].type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > + } > + dev->write_position = 0; > +} > + > +/* fills and register video device */ > +static void init_vdev(struct video_device *vdev) > +{ > + strcpy(vdev->name, "Dummy video device"); strlcpy. Also rename as 'Loopback video device'. > + vdev->tvnorms = V4L2_STD_NTSC | V4L2_STD_SECAM | V4L2_STD_PAL;/* TODO */ > + vdev->current_norm = V4L2_STD_PAL_B, /* do not know what is best here */ > + vdev->vfl_type = VFL_TYPE_GRABBER; > + vdev->fops = &v4l2_loopback_fops; > + vdev->ioctl_ops = &v4l2_loopback_ioctl_ops; > + vdev->release = &video_device_release; > + vdev->minor = -1; > +#ifdef DEBUG > + vdev->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; > +#endif > +} > + > +/* init default capture paramete, only fps may be changed in future */ > +static void init_capture_param(struct v4l2_captureparm *capture_param) > +{ > + capture_param->capability = 0; > + capture_param->capturemode = 0; > + capture_param->extendedmode = 0; > + capture_param->readbuffers = V4L2_LOOPBACK_BUFFERS_NUMBER; > + capture_param->timeperframe.numerator = 1; > + capture_param->timeperframe.denominator = 30; > +} > + > +/* init loopback main structure */ > +static int v4l2_loopback_init(struct v4l2_loopback_device *dev) > +{ > + dev->vdev = video_device_alloc(); > + if (dev->vdev == NULL) > + return -ENOMEM; > + init_vdev(dev->vdev); > + init_capture_param(&dev->capture_param); > + dev->buffers_number = V4L2_LOOPBACK_BUFFERS_NUMBER; > + dev->open_count = 0; > + dev->ready_for_capture = 0; > + dev->buffer_size = 0; > + dev->image = NULL; > + /* kfree on module release */ > + dev->buffers = > + kzalloc(sizeof(*dev->buffers) * dev->buffers_number, > + GFP_KERNEL); > + if (dev->buffers == NULL) > + return -ENOMEM; > + init_waitqueue_head(&dev->read_event); > + return 0; > +}; > + > +/*********************************************** > +**************** LINUX KERNEL **************** > +************************************************/ > +static const struct v4l2_file_operations v4l2_loopback_fops = { > + .owner = THIS_MODULE, > + .open = v4l_loopback_open, > + .release = v4l_loopback_close, > + .read = v4l_loopback_read, > + .write = v4l_loopback_write, > + .poll = v4l2_loopback_poll, > + .mmap = v4l2_loopback_mmap, > + .ioctl = video_ioctl2, > +}; > + > +static const struct v4l2_ioctl_ops v4l2_loopback_ioctl_ops = { > + .vidioc_querycap = &vidioc_querycap, > + .vidioc_enum_fmt_vid_cap = &vidioc_enum_fmt_cap, > + .vidioc_enum_input = &vidioc_enum_input, > + .vidioc_g_input = &vidioc_g_input, > + .vidioc_s_input = &vidioc_s_input, > + .vidioc_g_fmt_vid_cap = &vidioc_g_fmt_cap, > + .vidioc_s_fmt_vid_cap = &vidioc_s_fmt_cap, > + .vidioc_s_fmt_vid_out = &vidioc_s_fmt_video_output, > + .vidioc_try_fmt_vid_cap = &vidioc_try_fmt_cap, > + .vidioc_try_fmt_vid_out = &vidioc_try_fmt_video_output, > + .vidioc_s_std = &vidioc_s_std, > + .vidioc_g_parm = &vidioc_g_parm, > + .vidioc_s_parm = &vidioc_s_parm, > + .vidioc_reqbufs = &vidioc_reqbufs, > + .vidioc_querybuf = &vidioc_querybuf, > + .vidioc_qbuf = &vidioc_qbuf, > + .vidioc_dqbuf = &vidioc_dqbuf, > + .vidioc_streamon = &vidioc_streamon, > + .vidioc_streamoff = &vidioc_streamoff, > +#ifdef CONFIG_VIDEO_V4L1_COMPAT > + .vidiocgmbuf = &vidiocgmbuf, > +#endif > +}; > + > +int __init init_module() > +{ > + int ret; > + dprintk("entering init_module()\n"); > + /* kfree on module release */ > + dev = kzalloc(sizeof(*dev), GFP_KERNEL); > + if (dev == NULL) > + return -ENOMEM; > + ret = v4l2_loopback_init(dev); > + if (ret < 0) > + return ret; > + /* register the device -> it creates /dev/video* */ > + if (video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1) < 0) { > + video_device_release(dev->vdev); > + printk(KERN_INFO "failed video_register_device()\n"); > + return -EFAULT; > + } > + printk(KERN_INFO "v4l2-loopback module installed\n"); > + return 0; > +} > + > +void __exit cleanup_module() > +{ > + dprintk("entering cleanup_module()\n"); > + /* unregister the device -> it deletes /dev/video* */ > + video_unregister_device(dev->vdev); > + kfree(dev->buffers); > + kfree(dev); > + printk(KERN_INFO "v4l2-loopback module removed\n"); > +} > + > + > +MODULE_DESCRIPTION("V4L2 loopback video device"); > +MODULE_VERSION("0.1.0"); > +MODULE_AUTHOR("Vasily Levin"); > +MODULE_LICENSE("GPL"); > diff -uprN v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.h v4l-dvb.my/linux/drivers/media/video/v4l2loopback.h > --- v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.h 1970-01-01 03:00:00.000000000 +0300 > +++ v4l-dvb.my/linux/drivers/media/video/v4l2loopback.h 2009-03-24 18:21:58.000000000 +0200 > @@ -0,0 +1,58 @@ > +/* > + * v4l2loopback.h -- video 4 linux loopback driver > + * > + * Copyright (C) 2005-2009 > + * Vasily Levin (vasaka@gmail.com) > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + */ > + > +#ifndef _V4L2LOOPBACK_H > +#define _V4L2LOOPBACK_H > + > +#include <linux/videodev2.h> > +#include <media/v4l2-common.h> > + /* fixed inner buffers number */ > +/* TODO(vasaka) make this module parameter */ Right :-) Doing this as module parameters is much nicer. > +#define V4L2_LOOPBACK_BUFFERS_NUMBER 4 > +#define V4L2_LOOPBACK_MAX_OPENERS 10 > + > +/* TODO(vasaka) use typenames which are common to kernel, but first find out if > + * it is needed */ > +/* struct keeping state and settings of loopback device */ > +struct v4l2_loopback_device { > + struct video_device *vdev; > + /* pixel and stream format */ > + struct v4l2_pix_format pix_format; > + struct v4l2_captureparm capture_param; > + /* buffers stuff */ > + __u8 *image; /* pointer to actual buffers data */ Use u8 for kernel drivers instead of __u8. > + int buffers_number; /* should not be big, 4 is a good choise */ typo: choice > + struct v4l2_buffer *buffers; /* inner driver buffers */ > + int write_position; /* number of last written frame + 1 */ > + long buffer_size; > + /* sync stuff */ > + int open_count; > + int ready_for_capture;/* set to true when at least one writer opened > + * device and negotiated format */ > + wait_queue_head_t read_event; > +}; Add empty lines between types. > +/* types of opener shows what opener wants to do with loopback */ > +enum opener_type { > + UNNEGOTIATED = 0, > + READER = 1, > + WRITER = 2, > +}; Ditto. > +/* struct keeping state and type of opener */ > +struct v4l2_loopback_opener { > + enum opener_type type; > + int buffers_number; > + int position; /* number of last processed frame + 1 or > + * write_position - 1 if reader went out of sinc */ typo: sync. > + struct v4l2_buffer *buffers; > +}; > +#endif /* _V4L2LOOPBACK_H */ > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please also use struct v4l2_device in this driver. See vivi.c and Documentation/video4linux/v4l2-framework.txt. New drivers should use this so that they can take advantage of future framework improvements. I'm sure there is more to be done here, but let's first fix these issues. Quite a few of the comments I made concern codingstyle. It may seem silly, but having all drivers conform to the kernel codingstyle as much as is possible will make them a lot more readable and thus much easier to review. Thanks! Hans
In this patch revision fixed complains from checkpatch.pl spell check of comments done --- This patch introduces v4l2 loopback module From: Vasily Levin <vasaka@gmail.com> This is v4l2 loopback driver which can be used to make available any userspace video as v4l2 device. Initially it was written to make videoeffects available to Skype, but in fact it have many more uses. Priority: normal Signed-off-by: Vasily Levin <vasaka@gmail.com> diff -uprN v4l-dvb.orig/linux/drivers/media/video/Kconfig v4l- dvb.my/linux/drivers/media/video/Kconfig --- v4l-dvb.orig/linux/drivers/media/video/Kconfig 2009-05-17 22:39:41.000000000 +0300 +++ v4l-dvb.my/linux/drivers/media/video/Kconfig 2009-05-17 22:41:22.000000000 +0300 @@ -497,6 +497,17 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. +config VIDEO_V4L2_LOOPBACK + tristate "v4l2 loopback driver" + depends on VIDEO_V4L2 && VIDEO_DEV + help + Say Y if you want to use v4l2 loopback driver. + Looback driver allows its user to present any userspace + video as a v4l2 device that can be handy for testing purpose, + or for fixing bugs like upside down image, or for adding + nice effects to video chats + This driver can be compiled as a module, called v4l2loopback. + source "drivers/media/video/bt8xx/Kconfig" config VIDEO_PMS diff -uprN v4l-dvb.orig/linux/drivers/media/video/Makefile v4l- dvb.my/linux/drivers/media/video/Makefile --- v4l-dvb.orig/linux/drivers/media/video/Makefile 2009-05-17 22:39:41.000000000 +0300 +++ v4l-dvb.my/linux/drivers/media/video/Makefile 2009-05-17 22:41:22.000000000 +0300 @@ -134,6 +134,7 @@ obj-$(CONFIG_VIDEO_IVTV) += ivtv/ obj-$(CONFIG_VIDEO_CX18) += cx18/ obj-$(CONFIG_VIDEO_VIVI) += vivi.o +obj-$(CONFIG_VIDEO_V4L2_LOOPBACK) += v4l2loopback.o obj-$(CONFIG_VIDEO_CX23885) += cx23885/ obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o diff -uprN v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.c v4l- dvb.my/linux/drivers/media/video/v4l2loopback.c --- v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.c 1970-01-01 03:00:00.000000000 +0300 +++ v4l-dvb.my/linux/drivers/media/video/v4l2loopback.c 2009-05-17 23:41:07.000000000 +0300 @@ -0,0 +1,774 @@ +/* + * v4l2loopback.c -- video 4 linux loopback driver + * + * Copyright (C) 2005-2009 + * Vasily Levin (vasaka@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <linux/version.h> +#include <linux/vmalloc.h> +#include <linux/mm.h> +#include <linux/time.h> +#include <linux/module.h> +#include <linux/videodev2.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-common.h> + +#define YAVLD_STREAMING + +MODULE_DESCRIPTION("V4L2 loopback video device"); +MODULE_VERSION("0.1.1"); +MODULE_AUTHOR("Vasily Levin"); +MODULE_LICENSE("GPL"); + +/* module structures */ +/* TODO(vasaka) use typenames which are common to kernel, but first find out if + * it is needed */ +/* struct keeping state and settings of loopback device */ +struct v4l2_loopback_device { + struct video_device *vdev; + /* pixel and stream format */ + struct v4l2_pix_format pix_format; + struct v4l2_captureparm capture_param; + /* buffers stuff */ + u8 *image; /* pointer to actual buffers data */ + int buffers_number; /* should not be big, 4 is a good choice */ + struct v4l2_buffer *buffers; /* inner driver buffers */ + int write_position; /* number of last written frame + 1 */ + long buffer_size; + /* sync stuff */ + atomic_t open_count; + int ready_for_capture;/* set to true when at least one writer opened + * device and negotiated format */ + wait_queue_head_t read_event; +}; + +/* types of opener shows what opener wants to do with loopback */ +enum opener_type { + UNNEGOTIATED = 0, + READER = 1, + WRITER = 2, +}; + +/* struct keeping state and type of opener */ +struct v4l2_loopback_opener { + enum opener_type type; + int buffers_number; + int position; /* number of last processed frame + 1 or + * write_position - 1 if reader went out of sync */ + struct v4l2_buffer *buffers; +}; + +/* module parameters */ +static int debug = 1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "if debug output is enabled, values are 0, 2 or 3"); + +static int max_buffers_number = 4; +module_param(max_buffers_number, int, 0); +MODULE_PARM_DESC(max_buffers_number, "how many buffers should be allocated"); + +static int max_openers = 10; +module_param(max_openers, int, 0); +MODULE_PARM_DESC(max_openers, "how many users can open loopback device"); + +/* module constants */ +#define MAX_MMAP_BUFFERS 100 /* max buffers that can be mapped, actually they + * are all mapped to max_buffers_number buffers*/ + +#define dprintk(fmt, args...)\ + if (debug > 1) {\ + printk(KERN_INFO "v4l2-loopback: " fmt, ##args);\ + } + + +#define dprintkrw(fmt, args...)\ + if (debug > 2) {\ + printk(KERN_INFO "v4l2-loopback: " fmt, ##args);\ + } + +/* global module data */ +struct v4l2_loopback_device *dev; +/* forward declarations */ +static void init_buffers(int buffer_size); +static int allocate_buffers(void); +static const struct v4l2_file_operations v4l2_loopback_fops; +static const struct v4l2_ioctl_ops v4l2_loopback_ioctl_ops; +/* Queue helpers */ +/* next functions sets buffer flags and adjusts counters accordingly */ +static inline void set_done(struct v4l2_buffer *buffer) +{ + buffer->flags &= ~V4L2_BUF_FLAG_QUEUED; + buffer->flags |= V4L2_BUF_FLAG_DONE; +} + +static inline void set_queued(struct v4l2_buffer *buffer) +{ + buffer->flags &= ~V4L2_BUF_FLAG_DONE; + buffer->flags |= V4L2_BUF_FLAG_QUEUED; +} + +static inline void unset_flags(struct v4l2_buffer *buffer) +{ + buffer->flags &= ~V4L2_BUF_FLAG_QUEUED; + buffer->flags &= ~V4L2_BUF_FLAG_DONE; +} +/* V4L2 ioctl caps and params calls */ +/* returns device capabilities, called on VIDIOC_QUERYCAP ioctl*/ +static int vidioc_querycap(struct file *file, + void *priv, struct v4l2_capability *cap) +{ + strlcpy(cap->driver, "v4l2 loopback", sizeof(cap->driver)); + strlcpy(cap->card, "Dummy video device", sizeof(cap->card)); + cap->version = 1; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | + V4L2_CAP_READWRITE +#ifdef YAVLD_STREAMING + | V4L2_CAP_STREAMING +#endif + ; + return 0; +} + +/* returns device formats, called on VIDIOC_ENUM_FMT ioctl*/ +static int vidioc_enum_fmt_cap(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + if (dev->ready_for_capture == 0) + return -EINVAL; + if (f->index) + return -EINVAL; + strlcpy(f->description, "current format", sizeof(f->description)); + f->pixelformat = dev->pix_format.pixelformat; + return 0; +}; + +/* returns current video format format fmt, called on VIDIOC_G_FMT ioctl */ +static int vidioc_g_fmt_cap(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + if (dev->ready_for_capture == 0) + return -EINVAL; + fmt->fmt.pix = dev->pix_format; + return 0; +} + +/* checks if it is OK to change to format fmt, called on VIDIOC_TRY_FMT ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_CAPTURE + * actual check is done by inner_try_fmt_cap + * just checking that pixelformat is OK and set other parameters, app should + * obey this decision */ +static int vidioc_try_fmt_cap(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + struct v4l2_loopback_opener *opener = file->private_data; + + opener->type = READER; + if (dev->ready_for_capture == 0) + return -EINVAL; + if (fmt->fmt.pix.pixelformat != dev->pix_format.pixelformat) + return -EINVAL; + fmt->fmt.pix = dev->pix_format; + return 0; +} + +/* checks if it is OK to change to format fmt, called on VIDIOC_TRY_FMT ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_OUTPUT + * if format is negotiated do not change it */ +static int vidioc_try_fmt_video_output(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + struct v4l2_loopback_opener *opener = file->private_data; + + opener->type = WRITER; + /* TODO(vasaka) loopback does not care about formats writer want to set, + * maybe it is a good idea to restrict format somehow */ + if (dev->ready_for_capture) { + fmt->fmt.pix = dev->pix_format; + } else { + if (fmt->fmt.pix.sizeimage == 0) + return -1; + dev->pix_format = fmt->fmt.pix; + } + return 0; +}; + +/* sets new output format, if possible, called on VIDIOC_S_FMT ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_CAPTURE + * actually format is set by input and we even do not check it, just return + * current one, but it is possible to set subregions of input TODO(vasaka) */ +static int vidioc_s_fmt_cap(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + return vidioc_try_fmt_cap(file, priv, fmt); +} + +/* sets new output format, if possible, called on VIDIOC_S_FMT ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_OUTPUT + * allocate data here because we do not know if it will be streaming or + * read/write IO */ +static int vidioc_s_fmt_video_output(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + int ret = vidioc_try_fmt_video_output(file, priv, fmt); + + if (ret < 0) + return ret; + if (dev->ready_for_capture == 0) { + dev->buffer_size = PAGE_ALIGN(dev->pix_format.sizeimage); + fmt->fmt.pix.sizeimage = dev->buffer_size; + } + return ret; +} + +/* get some data flaw parameters, only capability, fps and readbuffers has + * effect on this driver, called on VIDIOC_G_PARM */ +static int vidioc_g_parm(struct file *file, void *priv, + struct v4l2_streamparm *parm) +{ + /* do not care about type of opener, hope this enums would always be + * compatible */ + parm->parm.capture = dev->capture_param; + return 0; +} + +/* get some data flaw parameters, only capability, fps and readbuffers has + * effect on this driver, called on VIDIOC_S_PARM */ +static int vidioc_s_parm(struct file *file, void *priv, + struct v4l2_streamparm *parm) +{ + dprintk("vidioc_s_parm called frate=%d/%d\n", + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator); + switch (parm->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + parm->parm.capture = dev->capture_param; + return 0; + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + /* TODO(vasaka) do nothing now, but should set fps if + * needed */ + parm->parm.capture = dev->capture_param; + return 0; + default: + return -1; + } +} + +/* sets a tv standard, actually we do not need to handle this any special way + * added to support effecttv, can not be inline as I need pointer to it */ +static int vidioc_s_std(struct file *file, void *private_data, + v4l2_std_id *norm) +{ + return 0; +} + +/* returns set of device inputs, in our case there is only one, but later I may + * add more, called on VIDIOC_ENUMINPUT */ +static int vidioc_enum_input(struct file *file, void *fh, + struct v4l2_input *inp) +{ + if (dev->ready_for_capture == 0) + return -EINVAL; + if (inp->index == 0) { + strlcpy(inp->name, "loopback", sizeof(inp->name)); + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->audioset = 0; + inp->tuner = 0; + inp->std = V4L2_STD_ALL; + inp->status = 0; + return 0; + } + return -EINVAL; +} + +/* which input is currently active, called on VIDIOC_G_INPUT */ +int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + *i = 0; + return 0; +} + +/* set input, can make sense if we have more than one video src, + * called on VIDIOC_S_INPUT */ +int vidioc_s_input(struct file *file, void *fh, unsigned int i) +{ + if (i == 0) + return 0; + return -EINVAL; +} + +/* V4L2 ioctl buffer related calls */ +/* negotiate buffer type, called on VIDIOC_REQBUFS + * only mmap streaming supported */ +static int vidioc_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *b) +{ + switch (b->memory) { + case V4L2_MEMORY_MMAP: + /* do nothing here, buffers are always allocated*/ + if (b->count == 0) + return 0; + b->count = dev->buffers_number; + return 0; + default: + return -EINVAL; + } +} + +/* returns buffer asked for, called on VIDIOC_QUERYBUF + give app as many buffers as it wants, if it less than MAX, + but map them in our inner buffers */ +static int vidioc_querybuf(struct file *file, void *fh, + struct v4l2_buffer *b) +{ + enum v4l2_buf_type type = b->type; + int index = b->index; + + if ((b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (b->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)) { + return -EINVAL; + } + if (b->index > MAX_MMAP_BUFFERS) + return -EINVAL; + *b = dev->buffers[b->index % dev->buffers_number]; + b->type = type; + b->index = index; + return 0; +} + +/* put buffer to queue, called on VIDIOC_QBUF */ +static int vidioc_qbuf(struct file *file, void *private_data, + struct v4l2_buffer *buf) +{ + int index = buf->index % dev->buffers_number; + + if (buf->index > MAX_MMAP_BUFFERS) + return -EINVAL; + switch (buf->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + set_queued(&dev->buffers[index]); + return 0; + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + do_gettimeofday(&dev->buffers[index].timestamp); + set_done(&dev->buffers[index]); + wake_up_all(&dev->read_event); + return 0; + default: + return -EINVAL; + } +} + +/* put buffer to dequeue, called on VIDIOC_DQBUF */ +static int vidioc_dqbuf(struct file *file, void *private_data, + struct v4l2_buffer *buf) +{ + int index; + struct v4l2_loopback_opener *opener = file->private_data; + + switch (buf->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if ((dev->write_position <= opener->position) && + (file->f_flags&O_NONBLOCK)) + return -EAGAIN; + wait_event_interruptible(dev->read_event, (dev->write_position > + opener->position)); + if (dev->write_position > opener->position+2) + opener->position = dev->write_position - 1; + index = opener->position % dev->buffers_number; + if (!(dev->buffers[index].flags&V4L2_BUF_FLAG_MAPPED)) { + printk(KERN_INFO "v4l2-loopback: " + "trying to return not mapped buf\n"); + return -EINVAL; + } + ++opener->position; + unset_flags(&dev->buffers[index]); + *buf = dev->buffers[index]; + return 0; + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + index = dev->write_position % dev->buffers_number; + unset_flags(&dev->buffers[index]); + *buf = dev->buffers[index]; + ++dev->write_position; + return 0; + default: + return -EINVAL; + } +} + +static int vidioc_streamon(struct file *file, void *private_data, + enum v4l2_buf_type type) +{ + int ret; + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + if (dev->ready_for_capture == 0) { + ret = allocate_buffers(); + if (ret < 0) + return ret; + init_buffers(dev->buffer_size); + dev->ready_for_capture = 1; + } + return 0; + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (dev->ready_for_capture == 0) + return -EIO; + return 0; + default: + return -EINVAL; + } +} + +static int vidioc_streamoff(struct file *file, void *private_data, + enum v4l2_buf_type type) +{ + return 0; +} + +#ifdef CONFIG_VIDEO_V4L1_COMPAT +int vidiocgmbuf(struct file *file, void *fh, struct video_mbuf *p) +{ + p->frames = dev->buffers_number; + p->offsets[0] = 0; + p->offsets[1] = 0; + p->size = dev->buffer_size; + return 0; +} +#endif +/* file operations */ +static void vm_open(struct vm_area_struct *vma) +{ + /* TODO(vasaka) do open counter here */ +} + +static void vm_close(struct vm_area_struct *vma) +{ + /* TODO(vasaka) do open counter here */ +} + +static struct vm_operations_struct vm_ops = { + .open = vm_open, + .close = vm_close, +}; + +static int v4l2_loopback_mmap(struct file *file, + struct vm_area_struct *vma) +{ + + struct page *page = NULL; + unsigned long addr; + unsigned long start = (unsigned long) vma->vm_start; + unsigned long size = (unsigned long) (vma->vm_end - vma->vm_start); + + dprintk("entering v4l_mmap(), offset: %lu\n", vma->vm_pgoff); + if (size > dev->buffer_size) { + printk(KERN_INFO "v4l2-loopback: " + "userspace tries to mmap to much, fail\n"); + return -EINVAL; + } + if ((vma->vm_pgoff << PAGE_SHIFT) > + dev->buffer_size * (dev->buffers_number - 1)) { + printk(KERN_INFO "v4l2-loopback: " + "userspace tries to mmap to far, fail\n"); + return -EINVAL; + } + addr = (unsigned long) dev->image + (vma->vm_pgoff << PAGE_SHIFT); + + while (size > 0) { + page = (void *) vmalloc_to_page((void *) addr); + + if (vm_insert_page(vma, start, page) < 0) + return -EAGAIN; + + start += PAGE_SIZE; + addr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &vm_ops; + vma->vm_private_data = 0; + dev->buffers[(vma->vm_pgoff<<PAGE_SHIFT)/dev->buffer_size].flags |= + V4L2_BUF_FLAG_MAPPED; + + vm_open(vma); + + dprintk("leaving v4l_mmap()\n"); + + return 0; +} + +static unsigned int v4l2_loopback_poll(struct file *file, + struct poll_table_struct *pts) +{ + struct v4l2_loopback_opener *opener = file->private_data; + int ret_mask = 0; + + switch (opener->type) { + case WRITER: + ret_mask = POLLOUT | POLLWRNORM; + break; + case READER: + poll_wait(file, &dev->read_event, pts); + if (dev->write_position > opener->position) + ret_mask = POLLIN | POLLRDNORM; + break; + default: + ret_mask = -POLLERR; + } + return ret_mask; +} + +/* do not want to limit device opens, it can be as many readers as user want, + * writers are limited by means of setting writer field */ +static int v4l_loopback_open(struct file *file) +{ + struct v4l2_loopback_opener *opener; + + dprintk("entering v4l_open()\n"); + if (dev->open_count.counter == max_openers) + return -EBUSY; + /* kfree on close */ + opener = kzalloc(sizeof(*opener), GFP_KERNEL); + if (opener == NULL) + return -ENOMEM; + file->private_data = opener; + atomic_inc(&dev->open_count); + return 0; +} + +static int v4l_loopback_close(struct file *file) +{ + struct v4l2_loopback_opener *opener = file->private_data; + + dprintk("entering v4l_close()\n"); + atomic_dec(&dev->open_count); + /* TODO(vasaka) does the closed file means that mapped buffers are + * no more valid and one can free data? */ + if (dev->open_count.counter == 0) { + vfree(dev->image); + dev->image = NULL; + dev->ready_for_capture = 0; + dev->buffer_size = 0; + } + kfree(opener); + return 0; +} + +static ssize_t v4l_loopback_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int read_index; + struct v4l2_loopback_opener *opener = file->private_data; + + if ((dev->write_position <= opener->position) && + (file->f_flags&O_NONBLOCK)) { + return -EAGAIN; + } + wait_event_interruptible(dev->read_event, + (dev->write_position > opener->position)); + if (count > dev->buffer_size) + count = dev->buffer_size; + if (dev->write_position > opener->position+2) + opener->position = dev->write_position - 1; + read_index = opener->position % dev->buffers_number; + if (copy_to_user((void *) buf, (void *) (dev->image + + dev->buffers[read_index].m.offset), count)) { + printk(KERN_ERR "v4l2-loopback: " + "failed copy_from_user() in write buf\n"); + return -EFAULT; + } + ++opener->position; + dprintkrw("leave v4l2_loopback_read()\n"); + return count; +} + +static ssize_t v4l_loopback_write(struct file *file, + const char __user *buf, size_t count, + loff_t *ppos) +{ + int write_index = dev->write_position % dev->buffers_number; + int ret; + + if (dev->ready_for_capture == 0) { + ret = allocate_buffers(); + if (ret < 0) + return ret; + init_buffers(dev->buffer_size); + dev->ready_for_capture = 1; + } + dprintkrw("v4l2_loopback_write() trying to write %d bytes\n", count); + if (count > dev->buffer_size) + count = dev->buffer_size; + if (copy_from_user( + (void *) (dev->image + dev->buffers[write_index].m.offset), + (void *) buf, count)) { + printk(KERN_ERR "v4l2-loopback: " + "failed copy_from_user() in write buf, could not write %d\n", + count); + return -EFAULT; + } + do_gettimeofday(&dev->buffers[write_index].timestamp); + dev->buffers[write_index].sequence = dev->write_position++; + wake_up_all(&dev->read_event); + dprintkrw("leave v4l2_loopback_write()\n"); + return count; +} + +/* init functions */ +/* allocates buffers, if buffer_size is set */ +static int allocate_buffers(void) +{ + /* vfree on close file operation in case no open handles left */ + if (dev->buffer_size == 0) + return -EINVAL; + dev->image = vmalloc(dev->buffer_size * dev->buffers_number); + if (dev->image == NULL) + return -ENOMEM; + dprintk("vmallocated %ld bytes\n", + dev->buffer_size * dev->buffers_number); + return 0; +} +/* init inner buffers, they are capture mode and flags are set as + * for capture mod buffers */ +static void init_buffers(int buffer_size) +{ + int i; + for (i = 0; i < dev->buffers_number; ++i) { + dev->buffers[i].bytesused = buffer_size; + dev->buffers[i].length = buffer_size; + dev->buffers[i].field = V4L2_FIELD_NONE; + dev->buffers[i].flags = 0; + dev->buffers[i].index = i; + dev->buffers[i].input = 0; + dev->buffers[i].m.offset = i * buffer_size; + dev->buffers[i].memory = V4L2_MEMORY_MMAP; + dev->buffers[i].sequence = 0; + dev->buffers[i].timestamp.tv_sec = 0; + dev->buffers[i].timestamp.tv_usec = 0; + dev->buffers[i].type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + dev->write_position = 0; +} + +/* fills and register video device */ +static void init_vdev(struct video_device *vdev) +{ + strlcpy(vdev->name, "Loopback video device", sizeof(vdev->name)); + vdev->tvnorms = V4L2_STD_ALL; + vdev->current_norm = V4L2_STD_ALL, + vdev->vfl_type = VFL_TYPE_GRABBER; + vdev->fops = &v4l2_loopback_fops; + vdev->ioctl_ops = &v4l2_loopback_ioctl_ops; + vdev->release = &video_device_release; + vdev->minor = -1; + if (debug > 1) + vdev->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; +} + +/* init default capture parameters, only fps may be changed in future */ +static void init_capture_param(struct v4l2_captureparm *capture_param) +{ + capture_param->capability = 0; + capture_param->capturemode = 0; + capture_param->extendedmode = 0; + capture_param->readbuffers = max_buffers_number; + capture_param->timeperframe.numerator = 1; + capture_param->timeperframe.denominator = 30; +} + +/* init loopback main structure */ +static int v4l2_loopback_init(struct v4l2_loopback_device *dev) +{ + dev->vdev = video_device_alloc(); + if (dev->vdev == NULL) + return -ENOMEM; + init_vdev(dev->vdev); + init_capture_param(&dev->capture_param); + dev->buffers_number = max_buffers_number; + atomic_set(&dev->open_count, 0); + dev->ready_for_capture = 0; + dev->buffer_size = 0; + dev->image = NULL; + /* kfree on module release */ + dev->buffers = + kzalloc(sizeof(*dev->buffers) * dev->buffers_number, + GFP_KERNEL); + if (dev->buffers == NULL) + return -ENOMEM; + init_waitqueue_head(&dev->read_event); + return 0; +}; + +/* LINUX KERNEL */ +static const struct v4l2_file_operations v4l2_loopback_fops = { + .owner = THIS_MODULE, + .open = v4l_loopback_open, + .release = v4l_loopback_close, + .read = v4l_loopback_read, + .write = v4l_loopback_write, + .poll = v4l2_loopback_poll, + .mmap = v4l2_loopback_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops v4l2_loopback_ioctl_ops = { + .vidioc_querycap = &vidioc_querycap, + .vidioc_enum_fmt_vid_cap = &vidioc_enum_fmt_cap, + .vidioc_enum_input = &vidioc_enum_input, + .vidioc_g_input = &vidioc_g_input, + .vidioc_s_input = &vidioc_s_input, + .vidioc_g_fmt_vid_cap = &vidioc_g_fmt_cap, + .vidioc_s_fmt_vid_cap = &vidioc_s_fmt_cap, + .vidioc_s_fmt_vid_out = &vidioc_s_fmt_video_output, + .vidioc_try_fmt_vid_cap = &vidioc_try_fmt_cap, + .vidioc_try_fmt_vid_out = &vidioc_try_fmt_video_output, + .vidioc_s_std = &vidioc_s_std, + .vidioc_g_parm = &vidioc_g_parm, + .vidioc_s_parm = &vidioc_s_parm, + .vidioc_reqbufs = &vidioc_reqbufs, + .vidioc_querybuf = &vidioc_querybuf, + .vidioc_qbuf = &vidioc_qbuf, + .vidioc_dqbuf = &vidioc_dqbuf, + .vidioc_streamon = &vidioc_streamon, + .vidioc_streamoff = &vidioc_streamoff, +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = &vidiocgmbuf, +#endif +}; + +int __init init_module() +{ + int ret; + + dprintk("entering init_module()\n"); + /* kfree on module release */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) + return -ENOMEM; + ret = v4l2_loopback_init(dev); + if (ret < 0) + return ret; + /* register the device -> it creates /dev/video* */ + if (video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1) < 0) { + video_device_release(dev->vdev); + printk(KERN_ERR "failed video_register_device()\n"); + return -EFAULT; + } + printk(KERN_INFO "v4l2-loopback module installed\n"); + return 0; +} + +void __exit cleanup_module() +{ + dprintk("entering cleanup_module()\n"); + /* unregister the device -> it deletes /dev/video* */ + video_unregister_device(dev->vdev); + kfree(dev->buffers); + kfree(dev); + printk(KERN_INFO "v4l2-loopback module removed\n"); +} -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff -uprN v4l-dvb.orig/linux/drivers/media/video/Kconfig v4l-dvb.my/linux/drivers/media/video/Kconfig --- v4l-dvb.orig/linux/drivers/media/video/Kconfig 2009-03-21 07:08:06.000000000 +0200 +++ v4l-dvb.my/linux/drivers/media/video/Kconfig 2009-03-25 23:36:13.000000000 +0200 @@ -465,6 +465,13 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. +config VIDEO_V4L2_LOOPBACK + tristate "v4l2 loopback driver" + depends on VIDEO_V4L2 && VIDEO_DEV + help + Say Y if you want to use v4l2 loopback driver. + This driver can be compiled as a module, called v4l2loopback. + source "drivers/media/video/bt8xx/Kconfig" config VIDEO_SAA6588 diff -uprN v4l-dvb.orig/linux/drivers/media/video/Makefile v4l-dvb.my/linux/drivers/media/video/Makefile --- v4l-dvb.orig/linux/drivers/media/video/Makefile 2009-03-21 07:08:06.000000000 +0200 +++ v4l-dvb.my/linux/drivers/media/video/Makefile 2009-03-24 12:54:59.000000000 +0200 @@ -132,6 +132,7 @@ obj-$(CONFIG_VIDEO_IVTV) += ivtv/ obj-$(CONFIG_VIDEO_CX18) += cx18/ obj-$(CONFIG_VIDEO_VIVI) += vivi.o +obj-$(CONFIG_VIDEO_V4L2_LOOPBACK) += v4l2loopback.o obj-$(CONFIG_VIDEO_CX23885) += cx23885/ obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o diff -uprN v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.c v4l-dvb.my/linux/drivers/media/video/v4l2loopback.c --- v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.c 1970-01-01 03:00:00.000000000 +0300 +++ v4l-dvb.my/linux/drivers/media/video/v4l2loopback.c 2009-03-25 23:01:35.000000000 +0200 @@ -0,0 +1,725 @@ +/* + * v4l2loopback.c -- video 4 linux loopback driver + * + * Copyright (C) 2005-2009 + * Vasily Levin (vasaka@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <linux/version.h> +#include <linux/vmalloc.h> +#include <linux/mm.h> +#include <linux/time.h> +#include <linux/module.h> +#include <media/v4l2-ioctl.h> +#include "v4l2loopback.h" + +/* #define DEBUG +#define DEBUG_RW */ +#define YAVLD_STREAMING + +#ifdef DEBUG +#define dprintk(fmt, args...)\ + do {\ + printk(KERN_INFO "v4l2-loopback: " fmt, ##args);\ + } while (0) +#else +#define dprintk(fmt, args...) +#endif + +#ifdef DEBUG_RW +#define dprintkrw(fmt, args...)\ + do {\ + printk(KERN_INFO "v4l2-loopback: " fmt, ##args);\ + } while (0) +#else +#define dprintkrw(fmt, args...) +#endif + +/* global module data */ +struct v4l2_loopback_device *dev; +/* forward declarations */ +static void init_buffers(int buffer_size); +static const struct v4l2_file_operations v4l2_loopback_fops; +static const struct v4l2_ioctl_ops v4l2_loopback_ioctl_ops; +/**************************************************************** +**************** my queue helpers ******************************* +****************************************************************/ +/* next functions sets buffer flags and adjusts counters accordingly */ +static void set_done(struct v4l2_buffer *buffer) +{ + buffer->flags |= V4L2_BUF_FLAG_DONE; + buffer->flags &= ~V4L2_BUF_FLAG_QUEUED; +} + +static void set_queued(struct v4l2_buffer *buffer) +{ + buffer->flags |= V4L2_BUF_FLAG_QUEUED; + buffer->flags &= ~V4L2_BUF_FLAG_DONE; +} + +static void unset_all(struct v4l2_buffer *buffer) +{ + buffer->flags &= ~V4L2_BUF_FLAG_QUEUED; + buffer->flags &= ~V4L2_BUF_FLAG_DONE; +} +/**************************************************************** +**************** V4L2 ioctl caps and params calls *************** +****************************************************************/ +/******************************************************************************/ +/* returns device capabilities, called on VIDIOC_QUERYCAP ioctl*/ +static int vidioc_querycap(struct file *file, + void *priv, struct v4l2_capability *cap) +{ + strcpy(cap->driver, "v4l2 loopback"); + strcpy(cap->card, "Dummy video device"); + cap->version = 1; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | + V4L2_CAP_READWRITE +#ifdef YAVLD_STREAMING + | V4L2_CAP_STREAMING +#endif + ; + return 0; +} + +/******************************************************************************/ +/* returns device formats, called on VIDIOC_ENUM_FMT ioctl*/ +static int vidioc_enum_fmt_cap(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + if (dev->ready_for_capture == 0) + return -EINVAL; + if (f->index) + return -EINVAL; + strcpy(f->description, "current format"); + f->pixelformat = dev->pix_format.pixelformat; + return 0; +}; + +/******************************************************************************/ +/* returns current video format format fmt, called on VIDIOC_G_FMT ioctl */ +static int vidioc_g_fmt_cap(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + if (dev->ready_for_capture == 0) + return -EINVAL; + fmt->fmt.pix = dev->pix_format; + return 0; +} + +/******************************************************************************/ +/* checks if it is OK to change to format fmt, called on VIDIOC_TRY_FMT ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_CAPTURE */ +/* actual check is done by inner_try_fmt_cap */ +/* just checking that pixelformat is OK and set other parameters, app should + * obey this decidion */ +static int vidioc_try_fmt_cap(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + struct v4l2_loopback_opener *opener = file->private_data; + opener->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + if (dev->ready_for_capture == 0) + return -EINVAL; + if (fmt->fmt.pix.pixelformat != dev->pix_format.pixelformat) + return -EINVAL; + fmt->fmt.pix = dev->pix_format; + return 0; +} + +/******************************************************************************/ +/* checks if it is OK to change to format fmt, called on VIDIOC_TRY_FMT ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_OUTPUT */ +/* if format is negotiated do not change it */ +static int vidioc_try_fmt_video_output(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + struct v4l2_loopback_opener *opener = file->private_data; + opener->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + /* TODO(vasaka) loopback does not care about formats writer want to set, + * maybe it is a good idea to restrict format somehow */ + if (dev->ready_for_capture) { + fmt->fmt.pix = dev->pix_format; + } else { + if (fmt->fmt.pix.sizeimage == 0) + return -1; + dev->pix_format = fmt->fmt.pix; + } + return 0; +}; + +/******************************************************************************/ +/* sets new output format, if possible, called on VIDIOC_S_FMT ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_CAPTURE */ +/* actually format is set by input and we even do not check it, just return + * current one, but it is possible to set subregions of input TODO(vasaka) */ +static int vidioc_s_fmt_cap(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + return vidioc_try_fmt_cap(file, priv, fmt); +} + +/******************************************************************************/ +/* sets new output format, if possible, called on VIDIOC_S_FMT ioctl + * with v4l2_buf_type set to V4L2_BUF_TYPE_VIDEO_OUTPUT */ +/* allocate data here because we do not know if it will be streaming or + * read/write IO */ +static int vidioc_s_fmt_video_output(struct file *file, + void *priv, struct v4l2_format *fmt) +{ + int ret = vidioc_try_fmt_video_output(file, priv, fmt); + if (ret < 0) + return ret; + if (dev->ready_for_capture == 0) { + dev->buffer_size = PAGE_ALIGN(dev->pix_format.sizeimage); + fmt->fmt.pix.sizeimage = dev->buffer_size; + /* vfree on close file operation in case no open handles left */ + dev->image = + vmalloc(dev->buffer_size * dev->buffers_number); + if (dev->image == NULL) + return -EFAULT; + dprintk("vmallocated %ld bytes\n", + dev->buffer_size * dev->buffers_number); + init_buffers(dev->buffer_size); + dev->ready_for_capture = 1; + } + return ret; +} + +/******************************************************************************/ +/*get some data flaw parameters, only capability, fps and readbuffers has effect + *on this driver, called on VIDIOC_G_PARM*/ +static int vidioc_g_parm(struct file *file, void *priv, + struct v4l2_streamparm *parm) +{ + /* do not care about type of opener, hope this enums would always be + * compatible */ + parm->parm.capture = dev->capture_param; + return 0; +} + +/******************************************************************************/ +/*get some data flaw parameters, only capability, fps and readbuffers has effect + *on this driver, called on VIDIOC_S_PARM */ +static int vidioc_s_parm(struct file *file, void *priv, + struct v4l2_streamparm *parm) +{ + dprintk("vidioc_s_parm called frate=%d/%d\n", + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator); + switch (parm->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ + parm->parm.capture = dev->capture_param; + return 0; + } + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ + /* TODO(vasaka) do nothing now, but should set fps if + * needed */ + parm->parm.capture = dev->capture_param; + return 0; + } + default:{ + return -1; + } + } +} + +/* sets a tv standart, actually we do not need to handle this any spetial way + * added to support effecttv, can not be inline as I need pointer to it */ +static int vidioc_s_std(struct file *file, void *private_data, + v4l2_std_id *norm) +{ + return 0; +} + +/* returns set of device inputs, in our case there is only one, but later I may + * add more, called on VIDIOC_ENUMINPUT */ +static int vidioc_enum_input(struct file *file, void *fh, + struct v4l2_input *inp) +{ + if (dev->ready_for_capture == 0) + return -EINVAL; + if (inp->index == 0) { + strcpy(inp->name, "loopback"); + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->audioset = 0; + inp->tuner = 0; + inp->std = V4L2_STD_PAL_B; + inp->status = 0; + return 0; + } + return -EINVAL; +} + +/* which input is currently active, called on VIDIOC_G_INPUT */ +int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + if (dev->ready_for_capture == 0) + return -EINVAL; + *i = 0; + return 0; +} + +/* set input, can make sense if we have more than one video src, + * called on VIDIOC_S_INPUT */ +int vidioc_s_input(struct file *file, void *fh, unsigned int i) +{ + if (dev->ready_for_capture == 0) + return -EINVAL; + if (i == 0) + return 0; + return -EINVAL; +} + +/*************************************************************** +**************** V4L2 ioctl buffer related calls *************** +***************************************************************/ +/* negotiate buffer type, called on VIDIOC_REQBUFS */ +/* only mmap streaming supported */ +static int vidioc_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *b) +{ + switch (b->memory) { + case V4L2_MEMORY_MMAP:{ + /* do nothing here, buffers are always allocated*/ + if (b->count == 0) + return 0; + b->count = dev->buffers_number; + return 0; + } + default:{ + return -EINVAL; + } + } +} + +/* returns buffer asked for, called on VIDIOC_QUERYBUF */ +/* give app as many buffers as it wants, if it less than 100 :-), + * but map them in our inner buffers */ +static int vidioc_querybuf(struct file *file, void *fh, + struct v4l2_buffer *b) +{ + enum v4l2_buf_type type = b->type; + int index = b->index; + if ((b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (b->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)) { + return -EINVAL; + } + if (b->index > 100) + return -EINVAL; + *b = dev->buffers[b->index % dev->buffers_number]; + b->type = type; + b->index = index; + return 0; +} + +/* put buffer to queue, called on VIDIOC_QBUF */ +static int vidioc_qbuf(struct file *file, void *private_data, + struct v4l2_buffer *buf) +{ + int index = buf->index % dev->buffers_number; + if (buf->index > 100) + return -EINVAL; + switch (buf->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ + set_queued(&dev->buffers[index]); + return 0; + } + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ + do_gettimeofday(&dev->buffers[index].timestamp); + set_done(&dev->buffers[index]); + wake_up_all(&dev->read_event); + return 0; + } + default:{ + return -EINVAL; + } + } +} + +/* put buffer to dequeue, called on VIDIOC_DQBUF */ +static int vidioc_dqbuf(struct file *file, void *private_data, + struct v4l2_buffer *buf) +{ + int index; + struct v4l2_loopback_opener *opener = file->private_data; + switch (buf->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE:{ + if ((dev->write_position <= opener->position) && + (file->f_flags&O_NONBLOCK)) + return -EAGAIN; + wait_event_interruptible(dev->read_event, + (dev->write_position > + opener->position)); + if (dev->write_position > opener->position+2) + opener->position = dev->write_position - 1; + index = opener->position % dev->buffers_number; + if (!(dev->buffers[index].flags&V4L2_BUF_FLAG_MAPPED)) { + printk(KERN_INFO "v4l2-loopback: " + "trying to g\return not mapped buf\n"); + return -EINVAL; + } + ++opener->position; + unset_all(&dev->buffers[index]); + *buf = dev->buffers[index]; + return 0; + } + case V4L2_BUF_TYPE_VIDEO_OUTPUT:{ + index = dev->write_position % dev->buffers_number; + unset_all(&dev->buffers[index]); + *buf = dev->buffers[index]; + ++dev->write_position; + return 0; + } + default:{ + return -EINVAL; + } + } +} + +static int vidioc_streamon(struct file *file, void *private_data, + enum v4l2_buf_type type) +{ + return 0; +} + +static int vidioc_streamoff(struct file *file, void *private_data, + enum v4l2_buf_type type) +{ + return 0; +} + +#ifdef CONFIG_VIDEO_V4L1_COMPAT +int vidiocgmbuf(struct file *file, void *fh, struct video_mbuf *p) +{ + p->frames = dev->buffers_number; + p->offsets[0] = 0; + p->offsets[1] = 0; + p->size = dev->buffer_size; + return 0; +} +#endif +/************************************************ +**************** file operations *************** +************************************************/ +static void vm_open(struct vm_area_struct *vma) +{ + /* TODO(vasaka) do open counter here */ +} + +static void vm_close(struct vm_area_struct *vma) +{ + /* TODO(vasaka) do open counter here */ +} + +static struct vm_operations_struct vm_ops = { + .open = vm_open, + .close = vm_close, +}; + +static int v4l2_loopback_mmap(struct file *file, + struct vm_area_struct *vma) +{ + + struct page *page = NULL; + + unsigned long addr; + unsigned long start = (unsigned long) vma->vm_start; + unsigned long size = (unsigned long) (vma->vm_end - vma->vm_start); + + dprintk("entering v4l_mmap(), offset: %lu\n", vma->vm_pgoff); + if (size > dev->buffer_size) { + printk(KERN_INFO "v4l2-loopback: " + "userspace tries to mmap to much, fail\n"); + return -EINVAL; + } + if ((vma->vm_pgoff << PAGE_SHIFT) > + dev->buffer_size * (dev->buffers_number - 1)) { + printk(KERN_INFO "v4l2-loopback: " + "userspace tries to mmap to far, fail\n"); + return -EINVAL; + } + addr = (unsigned long) dev->image + (vma->vm_pgoff << PAGE_SHIFT); + + while (size > 0) { + page = (void *) vmalloc_to_page((void *) addr); + + if (vm_insert_page(vma, start, page) < 0) + return -EAGAIN; + + start += PAGE_SIZE; + addr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &vm_ops; + vma->vm_private_data = 0; + dev->buffers[(vma->vm_pgoff<<PAGE_SHIFT)/dev->buffer_size].flags |= + V4L2_BUF_FLAG_MAPPED; + + vm_open(vma); + + dprintk("leaving v4l_mmap()\n"); + + return 0; +} + +static unsigned int v4l2_loopback_poll(struct file *file, + struct poll_table_struct *pts) +{ + struct v4l2_loopback_opener *opener = file->private_data; + int ret_mask = 0; + switch (opener->type) { + case WRITER: { + ret_mask = POLLOUT | POLLWRNORM; + } + case READER: { + poll_wait(file, &dev->read_event, pts); + if (dev->write_position > opener->position) + ret_mask = POLLIN | POLLRDNORM; + } + default: { + ret_mask = -POLLERR; + } + } + return ret_mask; +} + +/* do not want to limit device opens, it can be as many readers as user want, + * writers are limited by means of setting writer field */ +static int v4l_loopback_open(struct file *file) +{ + struct v4l2_loopback_opener *opener; + dprintk("entering v4l_open()\n"); + if (dev->open_count == V4L2_LOOPBACK_MAX_OPENERS) + return -EBUSY; + /* kfree on close */ + opener = kzalloc(sizeof(*opener), GFP_KERNEL); + if (opener == NULL) + return -ENOMEM; + file->private_data = opener; + ++dev->open_count; + return 0; +} + +static int v4l_loopback_close(struct file *file) +{ + struct v4l2_loopback_opener *opener = file->private_data; + dprintk("entering v4l_close()\n"); + --dev->open_count; + /* TODO(vasaka) does the closed file means that mmaped buffers are + * no more valid and one can free data? */ + if (dev->open_count == 0) { + vfree(dev->image); + dev->image = NULL; + dev->ready_for_capture = 0; + } + kfree(opener); + return 0; +} + +static ssize_t v4l_loopback_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int read_index; + struct v4l2_loopback_opener *opener = file->private_data; + if ((dev->write_position <= opener->position) && + (file->f_flags&O_NONBLOCK)) { + return -EAGAIN; + } + wait_event_interruptible(dev->read_event, + (dev->write_position > opener->position)); + if (count > dev->buffer_size) + count = dev->buffer_size; + if (dev->write_position > opener->position+2) + opener->position = dev->write_position - 1; + read_index = opener->position % dev->buffers_number; + if (copy_to_user((void *) buf, (void *) (dev->image + + dev->buffers[read_index].m.offset), count)) { + printk(KERN_INFO "v4l2-loopback: " + "failed copy_from_user() in write buf\n"); + return -EFAULT; + } + ++opener->position; + dprintkrw("leave v4l2_loopback_read()\n"); + return count; +} + +static ssize_t v4l_loopback_write(struct file *file, + const char __user *buf, size_t count, + loff_t *ppos) +{ + int write_index = dev->write_position % dev->buffers_number; + dprintkrw("v4l2_loopback_write() trying to write %d bytes\n", count); + if (count > dev->buffer_size) + count = dev->buffer_size; + if (copy_from_user( + (void *) (dev->image + dev->buffers[write_index].m.offset), + (void *) buf, count)) { + printk(KERN_INFO "v4l2-loopback: " + "failed copy_from_user() in write buf, could not write %d\n", + count); + return -EFAULT; + } + do_gettimeofday(&dev->buffers[write_index].timestamp); + dev->buffers[write_index].sequence = dev->write_position++; + wake_up_all(&dev->read_event); + dprintkrw("leave v4l2_loopback_write()\n"); + return count; +} + +/************************************************ +**************** init functions ***************** +************************************************/ +/* init inner buffers, they are capture mode and flags are set as + * for capture mod buffers */ +static void init_buffers(int buffer_size) +{ + int i; + for (i = 0; i < dev->buffers_number; ++i) { + dev->buffers[i].bytesused = buffer_size; + dev->buffers[i].length = buffer_size; + dev->buffers[i].field = V4L2_FIELD_NONE; + dev->buffers[i].flags = 0; + dev->buffers[i].index = i; + dev->buffers[i].input = 0; + dev->buffers[i].m.offset = i * buffer_size; + dev->buffers[i].memory = V4L2_MEMORY_MMAP; + dev->buffers[i].sequence = 0; + dev->buffers[i].timestamp.tv_sec = 0; + dev->buffers[i].timestamp.tv_usec = 0; + dev->buffers[i].type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + dev->write_position = 0; +} + +/* fills and register video device */ +static void init_vdev(struct video_device *vdev) +{ + strcpy(vdev->name, "Dummy video device"); + vdev->tvnorms = V4L2_STD_NTSC | V4L2_STD_SECAM | V4L2_STD_PAL;/* TODO */ + vdev->current_norm = V4L2_STD_PAL_B, /* do not know what is best here */ + vdev->vfl_type = VFL_TYPE_GRABBER; + vdev->fops = &v4l2_loopback_fops; + vdev->ioctl_ops = &v4l2_loopback_ioctl_ops; + vdev->release = &video_device_release; + vdev->minor = -1; +#ifdef DEBUG + vdev->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; +#endif +} + +/* init default capture paramete, only fps may be changed in future */ +static void init_capture_param(struct v4l2_captureparm *capture_param) +{ + capture_param->capability = 0; + capture_param->capturemode = 0; + capture_param->extendedmode = 0; + capture_param->readbuffers = V4L2_LOOPBACK_BUFFERS_NUMBER; + capture_param->timeperframe.numerator = 1; + capture_param->timeperframe.denominator = 30; +} + +/* init loopback main structure */ +static int v4l2_loopback_init(struct v4l2_loopback_device *dev) +{ + dev->vdev = video_device_alloc(); + if (dev->vdev == NULL) + return -ENOMEM; + init_vdev(dev->vdev); + init_capture_param(&dev->capture_param); + dev->buffers_number = V4L2_LOOPBACK_BUFFERS_NUMBER; + dev->open_count = 0; + dev->ready_for_capture = 0; + dev->buffer_size = 0; + dev->image = NULL; + /* kfree on module release */ + dev->buffers = + kzalloc(sizeof(*dev->buffers) * dev->buffers_number, + GFP_KERNEL); + if (dev->buffers == NULL) + return -ENOMEM; + init_waitqueue_head(&dev->read_event); + return 0; +}; + +/*********************************************** +**************** LINUX KERNEL **************** +************************************************/ +static const struct v4l2_file_operations v4l2_loopback_fops = { + .owner = THIS_MODULE, + .open = v4l_loopback_open, + .release = v4l_loopback_close, + .read = v4l_loopback_read, + .write = v4l_loopback_write, + .poll = v4l2_loopback_poll, + .mmap = v4l2_loopback_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops v4l2_loopback_ioctl_ops = { + .vidioc_querycap = &vidioc_querycap, + .vidioc_enum_fmt_vid_cap = &vidioc_enum_fmt_cap, + .vidioc_enum_input = &vidioc_enum_input, + .vidioc_g_input = &vidioc_g_input, + .vidioc_s_input = &vidioc_s_input, + .vidioc_g_fmt_vid_cap = &vidioc_g_fmt_cap, + .vidioc_s_fmt_vid_cap = &vidioc_s_fmt_cap, + .vidioc_s_fmt_vid_out = &vidioc_s_fmt_video_output, + .vidioc_try_fmt_vid_cap = &vidioc_try_fmt_cap, + .vidioc_try_fmt_vid_out = &vidioc_try_fmt_video_output, + .vidioc_s_std = &vidioc_s_std, + .vidioc_g_parm = &vidioc_g_parm, + .vidioc_s_parm = &vidioc_s_parm, + .vidioc_reqbufs = &vidioc_reqbufs, + .vidioc_querybuf = &vidioc_querybuf, + .vidioc_qbuf = &vidioc_qbuf, + .vidioc_dqbuf = &vidioc_dqbuf, + .vidioc_streamon = &vidioc_streamon, + .vidioc_streamoff = &vidioc_streamoff, +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = &vidiocgmbuf, +#endif +}; + +int __init init_module() +{ + int ret; + dprintk("entering init_module()\n"); + /* kfree on module release */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) + return -ENOMEM; + ret = v4l2_loopback_init(dev); + if (ret < 0) + return ret; + /* register the device -> it creates /dev/video* */ + if (video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1) < 0) { + video_device_release(dev->vdev); + printk(KERN_INFO "failed video_register_device()\n"); + return -EFAULT; + } + printk(KERN_INFO "v4l2-loopback module installed\n"); + return 0; +} + +void __exit cleanup_module() +{ + dprintk("entering cleanup_module()\n"); + /* unregister the device -> it deletes /dev/video* */ + video_unregister_device(dev->vdev); + kfree(dev->buffers); + kfree(dev); + printk(KERN_INFO "v4l2-loopback module removed\n"); +} + + +MODULE_DESCRIPTION("V4L2 loopback video device"); +MODULE_VERSION("0.1.0"); +MODULE_AUTHOR("Vasily Levin"); +MODULE_LICENSE("GPL"); diff -uprN v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.h v4l-dvb.my/linux/drivers/media/video/v4l2loopback.h --- v4l-dvb.orig/linux/drivers/media/video/v4l2loopback.h 1970-01-01 03:00:00.000000000 +0300 +++ v4l-dvb.my/linux/drivers/media/video/v4l2loopback.h 2009-03-24 18:21:58.000000000 +0200 @@ -0,0 +1,58 @@ +/* + * v4l2loopback.h -- video 4 linux loopback driver + * + * Copyright (C) 2005-2009 + * Vasily Levin (vasaka@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef _V4L2LOOPBACK_H +#define _V4L2LOOPBACK_H + +#include <linux/videodev2.h> +#include <media/v4l2-common.h> + /* fixed inner buffers number */ +/* TODO(vasaka) make this module parameter */ +#define V4L2_LOOPBACK_BUFFERS_NUMBER 4 +#define V4L2_LOOPBACK_MAX_OPENERS 10 + +/* TODO(vasaka) use typenames which are common to kernel, but first find out if + * it is needed */ +/* struct keeping state and settings of loopback device */ +struct v4l2_loopback_device { + struct video_device *vdev; + /* pixel and stream format */ + struct v4l2_pix_format pix_format; + struct v4l2_captureparm capture_param; + /* buffers stuff */ + __u8 *image; /* pointer to actual buffers data */ + int buffers_number; /* should not be big, 4 is a good choise */ + struct v4l2_buffer *buffers; /* inner driver buffers */ + int write_position; /* number of last written frame + 1 */ + long buffer_size; + /* sync stuff */ + int open_count; + int ready_for_capture;/* set to true when at least one writer opened + * device and negotiated format */ + wait_queue_head_t read_event; +}; +/* types of opener shows what opener wants to do with loopback */ +enum opener_type { + UNNEGOTIATED = 0, + READER = 1, + WRITER = 2, +}; +/* struct keeping state and type of opener */ +struct v4l2_loopback_opener { + enum opener_type type; + int buffers_number; + int position; /* number of last processed frame + 1 or + * write_position - 1 if reader went out of sinc */ + struct v4l2_buffer *buffers; +}; +#endif /* _V4L2LOOPBACK_H */