Message ID | 1355405263-29625-1-git-send-email-s.trumtrar@pengutronix.de (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
? 2012?12?13? 21:27, Steffen Trumtrar ??: > With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the > mainline mxs-uart driver now sets RTSEN only when hardware flow control is > enabled via software. It is not possible any longer to set RTS manually via > software. However, the manual modification is a valid operation. > Regain the possibility to set RTS via software and only set RTSEN when hardware > flow control is explicitly enabled via settermios cflag CRTSCTS. > > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> > --- > drivers/tty/serial/mxs-auart.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c > index 6db23b0..9f63f88 100644 > --- a/drivers/tty/serial/mxs-auart.c > +++ b/drivers/tty/serial/mxs-auart.c > @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) > > u32 ctrl = readl(u->membase + AUART_CTRL2); > > - ctrl &= ~AUART_CTRL2_RTSEN; > + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); > if (mctrl & TIOCM_RTS) { > if (tty_port_cts_enabled(&u->state->port)) > ctrl |= AUART_CTRL2_RTSEN; > + else > + ctrl |= AUART_CTRL2_RTS; > } > > s->ctrl = mctrl; Reviewed-by: Huang Shijie <b32955@freescale.com>
On 12/14/2012 03:27 AM, Huang Shijie wrote: > ? 2012?12?13? 21:27, Steffen Trumtrar ??: >> With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the >> mainline mxs-uart driver now sets RTSEN only when hardware flow control is >> enabled via software. It is not possible any longer to set RTS manually via >> software. However, the manual modification is a valid operation. >> Regain the possibility to set RTS via software and only set RTSEN when hardware >> flow control is explicitly enabled via settermios cflag CRTSCTS. >> >> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> >> --- >> drivers/tty/serial/mxs-auart.c | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c >> index 6db23b0..9f63f88 100644 >> --- a/drivers/tty/serial/mxs-auart.c >> +++ b/drivers/tty/serial/mxs-auart.c >> @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) >> >> u32 ctrl = readl(u->membase + AUART_CTRL2); >> >> - ctrl &= ~AUART_CTRL2_RTSEN; >> + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); >> if (mctrl & TIOCM_RTS) { >> if (tty_port_cts_enabled(&u->state->port)) >> ctrl |= AUART_CTRL2_RTSEN; >> + else >> + ctrl |= AUART_CTRL2_RTS; >> } >> >> s->ctrl = mctrl; > Reviewed-by: Huang Shijie <b32955@freescale.com> This patch is not not in today's next. What's the current status? Who will take it? Marc
On Mon, Jan 07, 2013 at 10:43:38AM +0100, Marc Kleine-Budde wrote: > On 12/14/2012 03:27 AM, Huang Shijie wrote: > > ? 2012?12?13? 21:27, Steffen Trumtrar ??: > >> With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the > >> mainline mxs-uart driver now sets RTSEN only when hardware flow control is > >> enabled via software. It is not possible any longer to set RTS manually via > >> software. However, the manual modification is a valid operation. > >> Regain the possibility to set RTS via software and only set RTSEN when hardware > >> flow control is explicitly enabled via settermios cflag CRTSCTS. > >> > >> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> > >> --- > >> drivers/tty/serial/mxs-auart.c | 4 +++- > >> 1 file changed, 3 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c > >> index 6db23b0..9f63f88 100644 > >> --- a/drivers/tty/serial/mxs-auart.c > >> +++ b/drivers/tty/serial/mxs-auart.c > >> @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) > >> > >> u32 ctrl = readl(u->membase + AUART_CTRL2); > >> > >> - ctrl &= ~AUART_CTRL2_RTSEN; > >> + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); > >> if (mctrl & TIOCM_RTS) { > >> if (tty_port_cts_enabled(&u->state->port)) > >> ctrl |= AUART_CTRL2_RTSEN; > >> + else > >> + ctrl |= AUART_CTRL2_RTS; > >> } > >> > >> s->ctrl = mctrl; > > Reviewed-by: Huang Shijie <b32955@freescale.com> > > This patch is not not in today's next. What's the current status? Who > will take it? > I see stable@vger.kernel.org is on copy. But it's not the correct way submit a fix for stable tree. Check out Documentation/stable_kernel_rules.txt for the correct one. Remember to copy Greg Kroah-Hartman <gregkh@linuxfoundation.org> who is collecting serial patches believe. Shawn
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 6db23b0..9f63f88 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTSEN; + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); if (mctrl & TIOCM_RTS) { if (tty_port_cts_enabled(&u->state->port)) ctrl |= AUART_CTRL2_RTSEN; + else + ctrl |= AUART_CTRL2_RTS; } s->ctrl = mctrl;
With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the mainline mxs-uart driver now sets RTSEN only when hardware flow control is enabled via software. It is not possible any longer to set RTS manually via software. However, the manual modification is a valid operation. Regain the possibility to set RTS via software and only set RTSEN when hardware flow control is explicitly enabled via settermios cflag CRTSCTS. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> --- drivers/tty/serial/mxs-auart.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)