| Message ID | 1358253244-11453-6-git-send-email-maarten.lankhorst@canonical.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2013/1/15 Maarten Lankhorst <m.b.lankhorst@gmail.com>: > This type of fence can be used with hardware synchronization for simple > hardware that can block execution until the condition > (dma_buf[offset] - value) >= 0 has been met. > > A software fallback still has to be provided in case the fence is used > with a device that doesn't support this mechanism. It is useful to expose > this for graphics cards that have an op to support this. > > Some cards like i915 can export those, but don't have an option to wait, > so they need the software fallback. > > I extended the original patch by Rob Clark. > > v1: Original > v2: Renamed from bikeshed to seqno, moved into dma-fence.c since > not much was left of the file. Lots of documentation added. > v3: Use fence_ops instead of custom callbacks. Moved to own file > to avoid circular dependency between dma-buf.h and fence.h > v4: Add spinlock pointer to seqno_fence_init > > Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> > --- > Documentation/DocBook/device-drivers.tmpl | 1 + > drivers/base/fence.c | 38 +++++++++++ > include/linux/seqno-fence.h | 105 ++++++++++++++++++++++++++++++ > 3 files changed, 144 insertions(+) > create mode 100644 include/linux/seqno-fence.h > > diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl > index 6f53fc0..ad14396 100644 > --- a/Documentation/DocBook/device-drivers.tmpl > +++ b/Documentation/DocBook/device-drivers.tmpl > @@ -128,6 +128,7 @@ X!Edrivers/base/interface.c > !Edrivers/base/dma-buf.c > !Edrivers/base/fence.c > !Iinclude/linux/fence.h > +!Iinclude/linux/seqno-fence.h > !Edrivers/base/dma-coherent.c > !Edrivers/base/dma-mapping.c > </sect1> > diff --git a/drivers/base/fence.c b/drivers/base/fence.c > index 28e5ffd..1d3f29c 100644 > --- a/drivers/base/fence.c > +++ b/drivers/base/fence.c > @@ -24,6 +24,7 @@ > #include <linux/slab.h> > #include <linux/export.h> > #include <linux/fence.h> > +#include <linux/seqno-fence.h> > > atomic_t fence_context_counter = ATOMIC_INIT(0); > EXPORT_SYMBOL(fence_context_counter); > @@ -284,3 +285,40 @@ out: > return ret; > } > EXPORT_SYMBOL(fence_default_wait); > + > +static bool seqno_enable_signaling(struct fence *fence) > +{ > + struct seqno_fence *seqno_fence = to_seqno_fence(fence); > + return seqno_fence->ops->enable_signaling(fence); > +} > + > +static bool seqno_signaled(struct fence *fence) > +{ > + struct seqno_fence *seqno_fence = to_seqno_fence(fence); > + return seqno_fence->ops->signaled && seqno_fence->ops->signaled(fence); > +} > + > +static void seqno_release(struct fence *fence) > +{ > + struct seqno_fence *f = to_seqno_fence(fence); > + > + dma_buf_put(f->sync_buf); > + if (f->ops->release) > + f->ops->release(fence); > + else > + kfree(f); > +} > + > +static long seqno_wait(struct fence *fence, bool intr, signed long timeout) > +{ > + struct seqno_fence *f = to_seqno_fence(fence); > + return f->ops->wait(fence, intr, timeout); > +} > + > +const struct fence_ops seqno_fence_ops = { > + .enable_signaling = seqno_enable_signaling, > + .signaled = seqno_signaled, > + .wait = seqno_wait, > + .release = seqno_release > +}; > +EXPORT_SYMBOL_GPL(seqno_fence_ops); > diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h > new file mode 100644 > index 0000000..603adc0 > --- /dev/null > +++ b/include/linux/seqno-fence.h > @@ -0,0 +1,105 @@ > +/* > + * seqno-fence, using a dma-buf to synchronize fencing > + * > + * Copyright (C) 2012 Texas Instruments > + * Copyright (C) 2012 Canonical Ltd > + * Authors: > + * Rob Clark <rob.clark@linaro.org> > + * Maarten Lankhorst <maarten.lankhorst@canonical.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published by > + * the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#ifndef __LINUX_SEQNO_FENCE_H > +#define __LINUX_SEQNO_FENCE_H > + > +#include <linux/fence.h> > +#include <linux/dma-buf.h> > + > +struct seqno_fence { > + struct fence base; > + > + const struct fence_ops *ops; > + struct dma_buf *sync_buf; > + uint32_t seqno_ofs; > +}; Hi maarten, I'm applying dma-fence v11 and seqno-fence v4 to exynos drm and have some proposals. The above seqno_fence structure has only one dmabuf. Shouldn't it have mutiple dmabufs? For example, in case of drm driver, when pageflip is requested, one framebuffer could have one more gem buffer for NV12M format. And this means that one more exported dmabufs should be sychronized with other devices. Below is simple structure for it, struct seqno_fence_dmabuf { struct list_head list; int id; struct dmabuf *sync_buf; uint32_t seqno_ops; uint32_t seqno; }; The member, id, could be used to identify which device sync_buf is going to be accessed by. In case of drm driver, one framebuffer could be accessed by one more devices, one is Display controller and another is HDMI controller. So id would have crtc number. And seqno_fence structure could be defined like below, struct seqno_fence { struct list_head sync_buf_list; struct fence base; const struct fence_ops *ops; }; In addition, I have implemented fence-helper framework for sw sync as WIP and below is intefaces for it, struct fence_helper { struct list_head entries; struct reservation_ticket ticket; struct seqno_fence *sf; spinlock_t lock; void *priv; }; int fence_helper_init(struct fence_helper *fh, void *priv, void (*remease)(struct fence *fence)); - This function is called at driver open so process unique context would have a new seqno_fence instance. This function does just seqno_fence_init call, initialize entries list and set device specific fence release callback. bool fence_helper_check_sync_buf(struct fence_helper *fh, struct dma_buf *sync_buf, int id); - This function is called before dma is started and checks if same sync_bufs had already be committed to reservation_object, bo->fence_shared[n]. And id could be used to identy which device sync_buf is going to be accessed by. int fence_helper_add_sync_buf(struct fence_helper *fh, struct dma_buf *sync_buf, int id); - This function is called if fence_helper_check_sync_buf() is true and adds it seqno_fence's sync_buf_list wrapping sync_buf as seqno_fence_dma_buf structure. With this function call, one seqno_fence instance would have more sync_bufs. At this time, the reference count to this sync_buf is taken. void fence_helper_del_sync_buf(struct fence_helper *fh, int id); - This function is called if some operation is failed after fence_helper_add_sync_buf call to release relevant resources. int fence_helper_init_reservation_entry(struct fence_helper *fh, struct dma_buf *dmabuf, bool shared, int id); - This function is called after fence_helper_add_sync_buf call and calls reservation_entry_init function to set a reservation object of sync_buf to a new reservation_entry object. And then the new reservation_entry is added to fh->entries to track all sync_bufs this device is going to access. void fence_helper_fini_reservation_entry(struct fence_helper *fh, int id); - This function is called if some operation is failed after fence_helper_init_reservation_entry call to releae relevant resources. int fence_helper_ticket_reserve(struct fence_helper *fh, int id); - This function is called after fence_helper_init_reservation_entry call and calls ticket_reserve function to reserve a ticket(locked for each reservation entry in fh->entires) void fence_helper_ticket_commit(struct fence_helper *fh, int id); - This function is called after fence_helper_ticket_reserve() is called to commit this device's fence to all reservation_objects of each sync_buf. After that, once other devices try to access these buffers, they would be blocked and unlock each reservation entry in fh->entires. int fence_helper_wait(struct fence_helper *fh, struct dma_buf *dmabuf, bool intr); - This function is called before fence_helper_add_sync_buf() is called to wait for a signal from other devices. int fence_helper_signal(struct fence_helper *fh, int id); - This function is called by device's interrupt handler or somewhere when dma access to this buffer has been completed and calls fence_signal() with each fence registed to each reservation object in fh->entries to notify dma access completion to other deivces. At this time, other devices blocked would be waked up and forward their next step. For more detail, in addition, this function does the following, - delete each reservation entry in fh->entries. - release each seqno_fence_dmabuf object in seqno_fence's sync_buf_list and call dma_buf_put() to put the reference count to dmabuf. Now the fence-helper framework is just WIP yet so there may be my missing points. If you are ok, I'd like to post it as RFC. Thanks, Inki Dae > + > +extern const struct fence_ops seqno_fence_ops; > + > +/** > + * to_seqno_fence - cast a fence to a seqno_fence > + * @fence: fence to cast to a seqno_fence > + * > + * Returns NULL if the fence is not a seqno_fence, > + * or the seqno_fence otherwise. > + */ > +static inline struct seqno_fence * > +to_seqno_fence(struct fence *fence) > +{ > + if (fence->ops != &seqno_fence_ops) > + return NULL; > + return container_of(fence, struct seqno_fence, base); > +} > + > +/** > + * seqno_fence_init - initialize a seqno fence > + * @fence: seqno_fence to initialize > + * @lock: pointer to spinlock to use for fence > + * @sync_buf: buffer containing the memory location to signal on > + * @context: the execution context this fence is a part of > + * @seqno_ofs: the offset within @sync_buf > + * @seqno: the sequence # to signal on > + * @ops: the fence_ops for operations on this seqno fence > + * > + * This function initializes a struct seqno_fence with passed parameters, > + * and takes a reference on sync_buf which is released on fence destruction. > + * > + * A seqno_fence is a dma_fence which can complete in software when > + * enable_signaling is called, but it also completes when > + * (s32)((sync_buf)[seqno_ofs] - seqno) >= 0 is true > + * > + * The seqno_fence will take a refcount on the sync_buf until it's > + * destroyed, but actual lifetime of sync_buf may be longer if one of the > + * callers take a reference to it. > + * > + * Certain hardware have instructions to insert this type of wait condition > + * in the command stream, so no intervention from software would be needed. > + * This type of fence can be destroyed before completed, however a reference > + * on the sync_buf dma-buf can be taken. It is encouraged to re-use the same > + * dma-buf for sync_buf, since mapping or unmapping the sync_buf to the > + * device's vm can be expensive. > + * > + * It is recommended for creators of seqno_fence to call fence_signal > + * before destruction. This will prevent possible issues from wraparound at > + * time of issue vs time of check, since users can check fence_is_signaled > + * before submitting instructions for the hardware to wait on the fence. > + * However, when ops.enable_signaling is not called, it doesn't have to be > + * done as soon as possible, just before there's any real danger of seqno > + * wraparound. > + */ > +static inline void > +seqno_fence_init(struct seqno_fence *fence, spinlock_t *lock, > + struct dma_buf *sync_buf, uint32_t context, uint32_t seqno_ofs, > + uint32_t seqno, const struct fence_ops *ops) > +{ > + BUG_ON(!fence || !sync_buf || !ops->enable_signaling || !ops->wait); > + > + __fence_init(&fence->base, &seqno_fence_ops, lock, context, seqno); > + > + get_dma_buf(sync_buf); > + fence->ops = ops; > + fence->sync_buf = sync_buf; > + fence->seqno_ofs = seqno_ofs; > +} > + > +#endif /* __LINUX_SEQNO_FENCE_H */ > -- > 1.8.0.3 > > > _______________________________________________ > Linaro-mm-sig mailing list > Linaro-mm-sig@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-mm-sig -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Op 16-01-13 07:28, Inki Dae schreef: > 2013/1/15 Maarten Lankhorst <m.b.lankhorst@gmail.com>: >> This type of fence can be used with hardware synchronization for simple >> hardware that can block execution until the condition >> (dma_buf[offset] - value) >= 0 has been met. >> >> A software fallback still has to be provided in case the fence is used >> with a device that doesn't support this mechanism. It is useful to expose >> this for graphics cards that have an op to support this. >> >> Some cards like i915 can export those, but don't have an option to wait, >> so they need the software fallback. >> >> I extended the original patch by Rob Clark. >> >> v1: Original >> v2: Renamed from bikeshed to seqno, moved into dma-fence.c since >> not much was left of the file. Lots of documentation added. >> v3: Use fence_ops instead of custom callbacks. Moved to own file >> to avoid circular dependency between dma-buf.h and fence.h >> v4: Add spinlock pointer to seqno_fence_init >> >> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> >> --- >> Documentation/DocBook/device-drivers.tmpl | 1 + >> drivers/base/fence.c | 38 +++++++++++ >> include/linux/seqno-fence.h | 105 ++++++++++++++++++++++++++++++ >> 3 files changed, 144 insertions(+) >> create mode 100644 include/linux/seqno-fence.h >> >> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl >> index 6f53fc0..ad14396 100644 >> --- a/Documentation/DocBook/device-drivers.tmpl >> +++ b/Documentation/DocBook/device-drivers.tmpl >> @@ -128,6 +128,7 @@ X!Edrivers/base/interface.c >> !Edrivers/base/dma-buf.c >> !Edrivers/base/fence.c >> !Iinclude/linux/fence.h >> +!Iinclude/linux/seqno-fence.h >> !Edrivers/base/dma-coherent.c >> !Edrivers/base/dma-mapping.c >> </sect1> >> diff --git a/drivers/base/fence.c b/drivers/base/fence.c >> index 28e5ffd..1d3f29c 100644 >> --- a/drivers/base/fence.c >> +++ b/drivers/base/fence.c >> @@ -24,6 +24,7 @@ >> #include <linux/slab.h> >> #include <linux/export.h> >> #include <linux/fence.h> >> +#include <linux/seqno-fence.h> >> >> atomic_t fence_context_counter = ATOMIC_INIT(0); >> EXPORT_SYMBOL(fence_context_counter); >> @@ -284,3 +285,40 @@ out: >> return ret; >> } >> EXPORT_SYMBOL(fence_default_wait); >> + >> +static bool seqno_enable_signaling(struct fence *fence) >> +{ >> + struct seqno_fence *seqno_fence = to_seqno_fence(fence); >> + return seqno_fence->ops->enable_signaling(fence); >> +} >> + >> +static bool seqno_signaled(struct fence *fence) >> +{ >> + struct seqno_fence *seqno_fence = to_seqno_fence(fence); >> + return seqno_fence->ops->signaled && seqno_fence->ops->signaled(fence); >> +} >> + >> +static void seqno_release(struct fence *fence) >> +{ >> + struct seqno_fence *f = to_seqno_fence(fence); >> + >> + dma_buf_put(f->sync_buf); >> + if (f->ops->release) >> + f->ops->release(fence); >> + else >> + kfree(f); >> +} >> + >> +static long seqno_wait(struct fence *fence, bool intr, signed long timeout) >> +{ >> + struct seqno_fence *f = to_seqno_fence(fence); >> + return f->ops->wait(fence, intr, timeout); >> +} >> + >> +const struct fence_ops seqno_fence_ops = { >> + .enable_signaling = seqno_enable_signaling, >> + .signaled = seqno_signaled, >> + .wait = seqno_wait, >> + .release = seqno_release >> +}; >> +EXPORT_SYMBOL_GPL(seqno_fence_ops); >> diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h >> new file mode 100644 >> index 0000000..603adc0 >> --- /dev/null >> +++ b/include/linux/seqno-fence.h >> @@ -0,0 +1,105 @@ >> +/* >> + * seqno-fence, using a dma-buf to synchronize fencing >> + * >> + * Copyright (C) 2012 Texas Instruments >> + * Copyright (C) 2012 Canonical Ltd >> + * Authors: >> + * Rob Clark <rob.clark@linaro.org> >> + * Maarten Lankhorst <maarten.lankhorst@canonical.com> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published by >> + * the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >> + * more details. >> + * >> + * You should have received a copy of the GNU General Public License along with >> + * this program. If not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#ifndef __LINUX_SEQNO_FENCE_H >> +#define __LINUX_SEQNO_FENCE_H >> + >> +#include <linux/fence.h> >> +#include <linux/dma-buf.h> >> + >> +struct seqno_fence { >> + struct fence base; >> + >> + const struct fence_ops *ops; >> + struct dma_buf *sync_buf; >> + uint32_t seqno_ofs; >> +}; > Hi maarten, > > I'm applying dma-fence v11 and seqno-fence v4 to exynos drm and have > some proposals. > > The above seqno_fence structure has only one dmabuf. Shouldn't it have > mutiple dmabufs? For example, in case of drm driver, when pageflip is > requested, one framebuffer could have one more gem buffer for NV12M > format. And this means that one more exported dmabufs should be > sychronized with other devices. Below is simple structure for it, The fence guards a single operation, as such I didn't feel like more than one dma-buf was needed to guard it. Have you considered simply attaching multiple fences instead? Each with their own dma-buf. There has been some muttering about allowing multiple exclusive fences to be attached, for arm soc's. But I'm also considering getting rid of the dma-buf member and add a function call to retrieve it, since the sync dma-buf member should not be changing often, and it would zap 2 atomic ops on every fence, but I want it replaced by something that's not 10x more complicated. Maybe "int get_sync_dma_buf(fence, old_dma_buf, &new_dma_buf)" that will set new_dma_buf = NULL if the old_dma_buf is unchanged, and return true + return a new reference to the sync dma_buf if it's not identical to old_dma_buf. old_dma_buf can also be NULL or a dma_buf that belongs to a different fence->context entirely. It might be capable of returning an error, in which case the fence would count as being signaled. This could reduce the need for separately checking fence_is_signaled first. I think this would allow caching the synchronization dma_buf in a similar way without each fence needing to hold a reference to the dma_buf all the time, even for fences that are only used internally. > struct seqno_fence_dmabuf { > struct list_head list; > int id; > struct dmabuf *sync_buf; > uint32_t seqno_ops; > uint32_t seqno; > }; > > The member, id, could be used to identify which device sync_buf is > going to be accessed by. In case of drm driver, one framebuffer could > be accessed by one more devices, one is Display controller and another > is HDMI controller. So id would have crtc number. Why do you need this? the base fence already has a context member. In fact I don't see why you need a linked list, at worst you'd need a static array since the amount of dma-bufs should already be known during allocation time. I would prefer to simply make reservation_object->fence_exclusive an array, since it would be easier to implement, and there have been some calls that arm might need such a thing. > And seqno_fence structure could be defined like below, > > struct seqno_fence { > struct list_head sync_buf_list; > struct fence base; > const struct fence_ops *ops; > }; > > In addition, I have implemented fence-helper framework for sw sync as > WIP and below is intefaces for it, > > struct fence_helper { > struct list_head entries; > struct reservation_ticket ticket; > struct seqno_fence *sf; > spinlock_t lock; > void *priv; > }; > > int fence_helper_init(struct fence_helper *fh, void *priv, void > (*remease)(struct fence *fence)); > - This function is called at driver open so process unique context > would have a new seqno_fence instance. This function does just > seqno_fence_init call, initialize entries list and set device specific > fence release callback. > > bool fence_helper_check_sync_buf(struct fence_helper *fh, struct > dma_buf *sync_buf, int id); > - This function is called before dma is started and checks if same > sync_bufs had already be committed to reservation_object, > bo->fence_shared[n]. And id could be used to identy which device > sync_buf is going to be accessed by. > > int fence_helper_add_sync_buf(struct fence_helper *fh, struct dma_buf > *sync_buf, int id); > - This function is called if fence_helper_check_sync_buf() is true and > adds it seqno_fence's sync_buf_list wrapping sync_buf as > seqno_fence_dma_buf structure. With this function call, one > seqno_fence instance would have more sync_bufs. At this time, the > reference count to this sync_buf is taken. > > void fence_helper_del_sync_buf(struct fence_helper *fh, int id); > - This function is called if some operation is failed after > fence_helper_add_sync_buf call to release relevant resources. > > int fence_helper_init_reservation_entry(struct fence_helper *fh, > struct dma_buf *dmabuf, bool shared, int id); > - This function is called after fence_helper_add_sync_buf call and > calls reservation_entry_init function to set a reservation object of > sync_buf to a new reservation_entry object. And then the new > reservation_entry is added to fh->entries to track all sync_bufs this > device is going to access. > > void fence_helper_fini_reservation_entry(struct fence_helper *fh, int id); > - This function is called if some operation is failed after > fence_helper_init_reservation_entry call to releae relevant resources. > > int fence_helper_ticket_reserve(struct fence_helper *fh, int id); > - This function is called after fence_helper_init_reservation_entry > call and calls ticket_reserve function to reserve a ticket(locked for > each reservation entry in fh->entires) > > void fence_helper_ticket_commit(struct fence_helper *fh, int id); > - This function is called after fence_helper_ticket_reserve() is > called to commit this device's fence to all reservation_objects of > each sync_buf. After that, once other devices try to access these > buffers, they would be blocked and unlock each reservation entry in > fh->entires. > > int fence_helper_wait(struct fence_helper *fh, struct dma_buf *dmabuf, > bool intr); > - This function is called before fence_helper_add_sync_buf() is called > to wait for a signal from other devices. > > int fence_helper_signal(struct fence_helper *fh, int id); > - This function is called by device's interrupt handler or somewhere > when dma access to this buffer has been completed and calls > fence_signal() with each fence registed to each reservation object in > fh->entries to notify dma access completion to other deivces. At this > time, other devices blocked would be waked up and forward their next > step. > > For more detail, in addition, this function does the following, > - delete each reservation entry in fh->entries. > - release each seqno_fence_dmabuf object in seqno_fence's > sync_buf_list and call dma_buf_put() to put the reference count to > dmabuf. > > > Now the fence-helper framework is just WIP yet so there may be my > missing points. If you are ok, I'd like to post it as RFC. Way too complicated.. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2013/1/16 Maarten Lankhorst <maarten.lankhorst@canonical.com>: > Op 16-01-13 07:28, Inki Dae schreef: >> 2013/1/15 Maarten Lankhorst <m.b.lankhorst@gmail.com>: >>> This type of fence can be used with hardware synchronization for simple >>> hardware that can block execution until the condition >>> (dma_buf[offset] - value) >= 0 has been met. >>> >>> A software fallback still has to be provided in case the fence is used >>> with a device that doesn't support this mechanism. It is useful to expose >>> this for graphics cards that have an op to support this. >>> >>> Some cards like i915 can export those, but don't have an option to wait, >>> so they need the software fallback. >>> >>> I extended the original patch by Rob Clark. >>> >>> v1: Original >>> v2: Renamed from bikeshed to seqno, moved into dma-fence.c since >>> not much was left of the file. Lots of documentation added. >>> v3: Use fence_ops instead of custom callbacks. Moved to own file >>> to avoid circular dependency between dma-buf.h and fence.h >>> v4: Add spinlock pointer to seqno_fence_init >>> >>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> >>> --- >>> Documentation/DocBook/device-drivers.tmpl | 1 + >>> drivers/base/fence.c | 38 +++++++++++ >>> include/linux/seqno-fence.h | 105 ++++++++++++++++++++++++++++++ >>> 3 files changed, 144 insertions(+) >>> create mode 100644 include/linux/seqno-fence.h >>> >>> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl >>> index 6f53fc0..ad14396 100644 >>> --- a/Documentation/DocBook/device-drivers.tmpl >>> +++ b/Documentation/DocBook/device-drivers.tmpl >>> @@ -128,6 +128,7 @@ X!Edrivers/base/interface.c >>> !Edrivers/base/dma-buf.c >>> !Edrivers/base/fence.c >>> !Iinclude/linux/fence.h >>> +!Iinclude/linux/seqno-fence.h >>> !Edrivers/base/dma-coherent.c >>> !Edrivers/base/dma-mapping.c >>> </sect1> >>> diff --git a/drivers/base/fence.c b/drivers/base/fence.c >>> index 28e5ffd..1d3f29c 100644 >>> --- a/drivers/base/fence.c >>> +++ b/drivers/base/fence.c >>> @@ -24,6 +24,7 @@ >>> #include <linux/slab.h> >>> #include <linux/export.h> >>> #include <linux/fence.h> >>> +#include <linux/seqno-fence.h> >>> >>> atomic_t fence_context_counter = ATOMIC_INIT(0); >>> EXPORT_SYMBOL(fence_context_counter); >>> @@ -284,3 +285,40 @@ out: >>> return ret; >>> } >>> EXPORT_SYMBOL(fence_default_wait); >>> + >>> +static bool seqno_enable_signaling(struct fence *fence) >>> +{ >>> + struct seqno_fence *seqno_fence = to_seqno_fence(fence); >>> + return seqno_fence->ops->enable_signaling(fence); >>> +} >>> + >>> +static bool seqno_signaled(struct fence *fence) >>> +{ >>> + struct seqno_fence *seqno_fence = to_seqno_fence(fence); >>> + return seqno_fence->ops->signaled && seqno_fence->ops->signaled(fence); >>> +} >>> + >>> +static void seqno_release(struct fence *fence) >>> +{ >>> + struct seqno_fence *f = to_seqno_fence(fence); >>> + >>> + dma_buf_put(f->sync_buf); >>> + if (f->ops->release) >>> + f->ops->release(fence); >>> + else >>> + kfree(f); >>> +} >>> + >>> +static long seqno_wait(struct fence *fence, bool intr, signed long timeout) >>> +{ >>> + struct seqno_fence *f = to_seqno_fence(fence); >>> + return f->ops->wait(fence, intr, timeout); >>> +} >>> + >>> +const struct fence_ops seqno_fence_ops = { >>> + .enable_signaling = seqno_enable_signaling, >>> + .signaled = seqno_signaled, >>> + .wait = seqno_wait, >>> + .release = seqno_release >>> +}; >>> +EXPORT_SYMBOL_GPL(seqno_fence_ops); >>> diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h >>> new file mode 100644 >>> index 0000000..603adc0 >>> --- /dev/null >>> +++ b/include/linux/seqno-fence.h >>> @@ -0,0 +1,105 @@ >>> +/* >>> + * seqno-fence, using a dma-buf to synchronize fencing >>> + * >>> + * Copyright (C) 2012 Texas Instruments >>> + * Copyright (C) 2012 Canonical Ltd >>> + * Authors: >>> + * Rob Clark <rob.clark@linaro.org> >>> + * Maarten Lankhorst <maarten.lankhorst@canonical.com> >>> + * >>> + * This program is free software; you can redistribute it and/or modify it >>> + * under the terms of the GNU General Public License version 2 as published by >>> + * the Free Software Foundation. >>> + * >>> + * This program is distributed in the hope that it will be useful, but WITHOUT >>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >>> + * more details. >>> + * >>> + * You should have received a copy of the GNU General Public License along with >>> + * this program. If not, see <http://www.gnu.org/licenses/>. >>> + */ >>> + >>> +#ifndef __LINUX_SEQNO_FENCE_H >>> +#define __LINUX_SEQNO_FENCE_H >>> + >>> +#include <linux/fence.h> >>> +#include <linux/dma-buf.h> >>> + >>> +struct seqno_fence { >>> + struct fence base; >>> + >>> + const struct fence_ops *ops; >>> + struct dma_buf *sync_buf; >>> + uint32_t seqno_ofs; >>> +}; >> Hi maarten, >> >> I'm applying dma-fence v11 and seqno-fence v4 to exynos drm and have >> some proposals. >> >> The above seqno_fence structure has only one dmabuf. Shouldn't it have >> mutiple dmabufs? For example, in case of drm driver, when pageflip is >> requested, one framebuffer could have one more gem buffer for NV12M >> format. And this means that one more exported dmabufs should be >> sychronized with other devices. Below is simple structure for it, > The fence guards a single operation, as such I didn't feel like more than one > dma-buf was needed to guard it. > > Have you considered simply attaching multiple fences instead? Each with their own dma-buf. I thought each context per device should have one fence. If not so, I think we could use multiple fences instead. > There has been some muttering about allowing multiple exclusive fences to be attached, for arm soc's. > > But I'm also considering getting rid of the dma-buf member and add a function call to retrieve it, since > the sync dma-buf member should not be changing often, and it would zap 2 atomic ops on every fence, > but I want it replaced by something that's not 10x more complicated. > > Maybe "int get_sync_dma_buf(fence, old_dma_buf, &new_dma_buf)" that will set new_dma_buf = NULL > if the old_dma_buf is unchanged, and return true + return a new reference to the sync dma_buf if it's not identical to old_dma_buf. > old_dma_buf can also be NULL or a dma_buf that belongs to a different fence->context entirely. It might be capable of > returning an error, in which case the fence would count as being signaled. This could reduce the need for separately checking > fence_is_signaled first. > > I think this would allow caching the synchronization dma_buf in a similar way without each fence needing > to hold a reference to the dma_buf all the time, even for fences that are only used internally. > >> struct seqno_fence_dmabuf { >> struct list_head list; >> int id; >> struct dmabuf *sync_buf; >> uint32_t seqno_ops; >> uint32_t seqno; >> }; >> >> The member, id, could be used to identify which device sync_buf is >> going to be accessed by. In case of drm driver, one framebuffer could >> be accessed by one more devices, one is Display controller and another >> is HDMI controller. So id would have crtc number. > Why do you need this? the base fence already has a context member. > > In fact I don't see why you need a linked list, at worst you'd need a static array since the amount of > dma-bufs should already be known during allocation time. > > I would prefer to simply make reservation_object->fence_exclusive an array, since it would be easier to implement, > and there have been some calls that arm might need such a thing. > Right, the array could be used instead. I just had quick implemention so it's not perfect. > >> And seqno_fence structure could be defined like below, >> >> struct seqno_fence { >> struct list_head sync_buf_list; >> struct fence base; >> const struct fence_ops *ops; >> }; >> >> In addition, I have implemented fence-helper framework for sw sync as >> WIP and below is intefaces for it, >> >> struct fence_helper { >> struct list_head entries; >> struct reservation_ticket ticket; >> struct seqno_fence *sf; >> spinlock_t lock; >> void *priv; >> }; >> >> int fence_helper_init(struct fence_helper *fh, void *priv, void >> (*remease)(struct fence *fence)); >> - This function is called at driver open so process unique context >> would have a new seqno_fence instance. This function does just >> seqno_fence_init call, initialize entries list and set device specific >> fence release callback. >> >> bool fence_helper_check_sync_buf(struct fence_helper *fh, struct >> dma_buf *sync_buf, int id); >> - This function is called before dma is started and checks if same >> sync_bufs had already be committed to reservation_object, >> bo->fence_shared[n]. And id could be used to identy which device >> sync_buf is going to be accessed by. >> >> int fence_helper_add_sync_buf(struct fence_helper *fh, struct dma_buf >> *sync_buf, int id); >> - This function is called if fence_helper_check_sync_buf() is true and >> adds it seqno_fence's sync_buf_list wrapping sync_buf as >> seqno_fence_dma_buf structure. With this function call, one >> seqno_fence instance would have more sync_bufs. At this time, the >> reference count to this sync_buf is taken. >> >> void fence_helper_del_sync_buf(struct fence_helper *fh, int id); >> - This function is called if some operation is failed after >> fence_helper_add_sync_buf call to release relevant resources. >> >> int fence_helper_init_reservation_entry(struct fence_helper *fh, >> struct dma_buf *dmabuf, bool shared, int id); >> - This function is called after fence_helper_add_sync_buf call and >> calls reservation_entry_init function to set a reservation object of >> sync_buf to a new reservation_entry object. And then the new >> reservation_entry is added to fh->entries to track all sync_bufs this >> device is going to access. >> >> void fence_helper_fini_reservation_entry(struct fence_helper *fh, int id); >> - This function is called if some operation is failed after >> fence_helper_init_reservation_entry call to releae relevant resources. >> >> int fence_helper_ticket_reserve(struct fence_helper *fh, int id); >> - This function is called after fence_helper_init_reservation_entry >> call and calls ticket_reserve function to reserve a ticket(locked for >> each reservation entry in fh->entires) >> >> void fence_helper_ticket_commit(struct fence_helper *fh, int id); >> - This function is called after fence_helper_ticket_reserve() is >> called to commit this device's fence to all reservation_objects of >> each sync_buf. After that, once other devices try to access these >> buffers, they would be blocked and unlock each reservation entry in >> fh->entires. >> >> int fence_helper_wait(struct fence_helper *fh, struct dma_buf *dmabuf, >> bool intr); >> - This function is called before fence_helper_add_sync_buf() is called >> to wait for a signal from other devices. >> >> int fence_helper_signal(struct fence_helper *fh, int id); >> - This function is called by device's interrupt handler or somewhere >> when dma access to this buffer has been completed and calls >> fence_signal() with each fence registed to each reservation object in >> fh->entries to notify dma access completion to other deivces. At this >> time, other devices blocked would be waked up and forward their next >> step. >> >> For more detail, in addition, this function does the following, >> - delete each reservation entry in fh->entries. >> - release each seqno_fence_dmabuf object in seqno_fence's >> sync_buf_list and call dma_buf_put() to put the reference count to >> dmabuf. >> >> >> Now the fence-helper framework is just WIP yet so there may be my >> missing points. If you are ok, I'd like to post it as RFC. > Way too complicated.. The purpose to the fence-helper is to use the dma-fence more simply. With the fence-helper, we doesn't need to consider fence and reservation interfaces for it. All we have to do is to call only the fence-helper interfaces without considering two things(fence and reservation). For example(In consumer case), driver_open() { struct fence-helper *fh; ... ctx->fh = kzalloc(); ... fence_helper_init(fh, ...); } driver_addfb() { ... fence_helper_add_sync_buf(fh, sync_buf, ...); ... } driver_pageflip() { ... fence_helper_wait(fh, sync_buf, ...); fence_helper_init_reservation_entry(fh, sync_buf, ...); fence_helper_ticket_reserve(fh, ...); fence_helper_ticket_commit(fh, ...); ... } driver_pageflip_handler() { ... fence_helper_signal(fh, ...); } The above functions are called in the following order, 1. driver_open() -> 2. driver_addfb() -> 3. driver_pageflip() -> 4.driver_pageflip_handler() Step 3 and 4 would be called repeatedly. And also producer could use similar way. I'm not sure that I understand the dma-fence framework fully so there might be something wrong and better way. Thanks, Inki Dae > > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2013/1/16 Maarten Lankhorst <maarten.lankhorst@canonical.com>: > Op 16-01-13 07:28, Inki Dae schreef: >> 2013/1/15 Maarten Lankhorst <m.b.lankhorst@gmail.com>: >>> This type of fence can be used with hardware synchronization for simple >>> hardware that can block execution until the condition >>> (dma_buf[offset] - value) >= 0 has been met. >>> >>> A software fallback still has to be provided in case the fence is used >>> with a device that doesn't support this mechanism. It is useful to expose >>> this for graphics cards that have an op to support this. >>> >>> Some cards like i915 can export those, but don't have an option to wait, >>> so they need the software fallback. >>> >>> I extended the original patch by Rob Clark. >>> >>> v1: Original >>> v2: Renamed from bikeshed to seqno, moved into dma-fence.c since >>> not much was left of the file. Lots of documentation added. >>> v3: Use fence_ops instead of custom callbacks. Moved to own file >>> to avoid circular dependency between dma-buf.h and fence.h >>> v4: Add spinlock pointer to seqno_fence_init >>> >>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> >>> --- >>> Documentation/DocBook/device-drivers.tmpl | 1 + >>> drivers/base/fence.c | 38 +++++++++++ >>> include/linux/seqno-fence.h | 105 ++++++++++++++++++++++++++++++ >>> 3 files changed, 144 insertions(+) >>> create mode 100644 include/linux/seqno-fence.h >>> >>> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl >>> index 6f53fc0..ad14396 100644 >>> --- a/Documentation/DocBook/device-drivers.tmpl >>> +++ b/Documentation/DocBook/device-drivers.tmpl >>> @@ -128,6 +128,7 @@ X!Edrivers/base/interface.c >>> !Edrivers/base/dma-buf.c >>> !Edrivers/base/fence.c >>> !Iinclude/linux/fence.h >>> +!Iinclude/linux/seqno-fence.h >>> !Edrivers/base/dma-coherent.c >>> !Edrivers/base/dma-mapping.c >>> </sect1> >>> diff --git a/drivers/base/fence.c b/drivers/base/fence.c >>> index 28e5ffd..1d3f29c 100644 >>> --- a/drivers/base/fence.c >>> +++ b/drivers/base/fence.c >>> @@ -24,6 +24,7 @@ >>> #include <linux/slab.h> >>> #include <linux/export.h> >>> #include <linux/fence.h> >>> +#include <linux/seqno-fence.h> >>> >>> atomic_t fence_context_counter = ATOMIC_INIT(0); >>> EXPORT_SYMBOL(fence_context_counter); >>> @@ -284,3 +285,40 @@ out: >>> return ret; >>> } >>> EXPORT_SYMBOL(fence_default_wait); >>> + >>> +static bool seqno_enable_signaling(struct fence *fence) >>> +{ >>> + struct seqno_fence *seqno_fence = to_seqno_fence(fence); >>> + return seqno_fence->ops->enable_signaling(fence); >>> +} >>> + >>> +static bool seqno_signaled(struct fence *fence) >>> +{ >>> + struct seqno_fence *seqno_fence = to_seqno_fence(fence); >>> + return seqno_fence->ops->signaled && seqno_fence->ops->signaled(fence); >>> +} >>> + >>> +static void seqno_release(struct fence *fence) >>> +{ >>> + struct seqno_fence *f = to_seqno_fence(fence); >>> + >>> + dma_buf_put(f->sync_buf); >>> + if (f->ops->release) >>> + f->ops->release(fence); >>> + else >>> + kfree(f); >>> +} >>> + >>> +static long seqno_wait(struct fence *fence, bool intr, signed long timeout) >>> +{ >>> + struct seqno_fence *f = to_seqno_fence(fence); >>> + return f->ops->wait(fence, intr, timeout); >>> +} >>> + >>> +const struct fence_ops seqno_fence_ops = { >>> + .enable_signaling = seqno_enable_signaling, >>> + .signaled = seqno_signaled, >>> + .wait = seqno_wait, >>> + .release = seqno_release >>> +}; >>> +EXPORT_SYMBOL_GPL(seqno_fence_ops); >>> diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h >>> new file mode 100644 >>> index 0000000..603adc0 >>> --- /dev/null >>> +++ b/include/linux/seqno-fence.h >>> @@ -0,0 +1,105 @@ >>> +/* >>> + * seqno-fence, using a dma-buf to synchronize fencing >>> + * >>> + * Copyright (C) 2012 Texas Instruments >>> + * Copyright (C) 2012 Canonical Ltd >>> + * Authors: >>> + * Rob Clark <rob.clark@linaro.org> >>> + * Maarten Lankhorst <maarten.lankhorst@canonical.com> >>> + * >>> + * This program is free software; you can redistribute it and/or modify it >>> + * under the terms of the GNU General Public License version 2 as published by >>> + * the Free Software Foundation. >>> + * >>> + * This program is distributed in the hope that it will be useful, but WITHOUT >>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >>> + * more details. >>> + * >>> + * You should have received a copy of the GNU General Public License along with >>> + * this program. If not, see <http://www.gnu.org/licenses/>. >>> + */ >>> + >>> +#ifndef __LINUX_SEQNO_FENCE_H >>> +#define __LINUX_SEQNO_FENCE_H >>> + >>> +#include <linux/fence.h> >>> +#include <linux/dma-buf.h> >>> + >>> +struct seqno_fence { >>> + struct fence base; >>> + >>> + const struct fence_ops *ops; >>> + struct dma_buf *sync_buf; >>> + uint32_t seqno_ofs; >>> +}; >> Hi maarten, >> >> I'm applying dma-fence v11 and seqno-fence v4 to exynos drm and have >> some proposals. >> >> The above seqno_fence structure has only one dmabuf. Shouldn't it have >> mutiple dmabufs? For example, in case of drm driver, when pageflip is >> requested, one framebuffer could have one more gem buffer for NV12M >> format. And this means that one more exported dmabufs should be >> sychronized with other devices. Below is simple structure for it, > The fence guards a single operation, as such I didn't feel like more than one > dma-buf was needed to guard it. > > Have you considered simply attaching multiple fences instead? Each with their own dma-buf. > There has been some muttering about allowing multiple exclusive fences to be attached, for arm soc's. > > But I'm also considering getting rid of the dma-buf member and add a function call to retrieve it, since > the sync dma-buf member should not be changing often, and it would zap 2 atomic ops on every fence, > but I want it replaced by something that's not 10x more complicated. > > Maybe "int get_sync_dma_buf(fence, old_dma_buf, &new_dma_buf)" that will set new_dma_buf = NULL > if the old_dma_buf is unchanged, and return true + return a new reference to the sync dma_buf if it's not identical to old_dma_buf. > old_dma_buf can also be NULL or a dma_buf that belongs to a different fence->context entirely. It might be capable of > returning an error, in which case the fence would count as being signaled. This could reduce the need for separately checking > fence_is_signaled first. > > I think this would allow caching the synchronization dma_buf in a similar way without each fence needing > to hold a reference to the dma_buf all the time, even for fences that are only used internally. > >> struct seqno_fence_dmabuf { >> struct list_head list; >> int id; >> struct dmabuf *sync_buf; >> uint32_t seqno_ops; >> uint32_t seqno; >> }; >> >> The member, id, could be used to identify which device sync_buf is >> going to be accessed by. In case of drm driver, one framebuffer could >> be accessed by one more devices, one is Display controller and another >> is HDMI controller. So id would have crtc number. > Why do you need this? the base fence already has a context member. > There was my missing point. Please ignore 'id'. If the fence relevant things are contained in each context(in case of drm page flip, a event), each driver could call fence_signal() with proper fence. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 6f53fc0..ad14396 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -128,6 +128,7 @@ X!Edrivers/base/interface.c !Edrivers/base/dma-buf.c !Edrivers/base/fence.c !Iinclude/linux/fence.h +!Iinclude/linux/seqno-fence.h !Edrivers/base/dma-coherent.c !Edrivers/base/dma-mapping.c </sect1> diff --git a/drivers/base/fence.c b/drivers/base/fence.c index 28e5ffd..1d3f29c 100644 --- a/drivers/base/fence.c +++ b/drivers/base/fence.c @@ -24,6 +24,7 @@ #include <linux/slab.h> #include <linux/export.h> #include <linux/fence.h> +#include <linux/seqno-fence.h> atomic_t fence_context_counter = ATOMIC_INIT(0); EXPORT_SYMBOL(fence_context_counter); @@ -284,3 +285,40 @@ out: return ret; } EXPORT_SYMBOL(fence_default_wait); + +static bool seqno_enable_signaling(struct fence *fence) +{ + struct seqno_fence *seqno_fence = to_seqno_fence(fence); + return seqno_fence->ops->enable_signaling(fence); +} + +static bool seqno_signaled(struct fence *fence) +{ + struct seqno_fence *seqno_fence = to_seqno_fence(fence); + return seqno_fence->ops->signaled && seqno_fence->ops->signaled(fence); +} + +static void seqno_release(struct fence *fence) +{ + struct seqno_fence *f = to_seqno_fence(fence); + + dma_buf_put(f->sync_buf); + if (f->ops->release) + f->ops->release(fence); + else + kfree(f); +} + +static long seqno_wait(struct fence *fence, bool intr, signed long timeout) +{ + struct seqno_fence *f = to_seqno_fence(fence); + return f->ops->wait(fence, intr, timeout); +} + +const struct fence_ops seqno_fence_ops = { + .enable_signaling = seqno_enable_signaling, + .signaled = seqno_signaled, + .wait = seqno_wait, + .release = seqno_release +}; +EXPORT_SYMBOL_GPL(seqno_fence_ops); diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h new file mode 100644 index 0000000..603adc0 --- /dev/null +++ b/include/linux/seqno-fence.h @@ -0,0 +1,105 @@ +/* + * seqno-fence, using a dma-buf to synchronize fencing + * + * Copyright (C) 2012 Texas Instruments + * Copyright (C) 2012 Canonical Ltd + * Authors: + * Rob Clark <rob.clark@linaro.org> + * Maarten Lankhorst <maarten.lankhorst@canonical.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LINUX_SEQNO_FENCE_H +#define __LINUX_SEQNO_FENCE_H + +#include <linux/fence.h> +#include <linux/dma-buf.h> + +struct seqno_fence { + struct fence base; + + const struct fence_ops *ops; + struct dma_buf *sync_buf; + uint32_t seqno_ofs; +}; + +extern const struct fence_ops seqno_fence_ops; + +/** + * to_seqno_fence - cast a fence to a seqno_fence + * @fence: fence to cast to a seqno_fence + * + * Returns NULL if the fence is not a seqno_fence, + * or the seqno_fence otherwise. + */ +static inline struct seqno_fence * +to_seqno_fence(struct fence *fence) +{ + if (fence->ops != &seqno_fence_ops) + return NULL; + return container_of(fence, struct seqno_fence, base); +} + +/** + * seqno_fence_init - initialize a seqno fence + * @fence: seqno_fence to initialize + * @lock: pointer to spinlock to use for fence + * @sync_buf: buffer containing the memory location to signal on + * @context: the execution context this fence is a part of + * @seqno_ofs: the offset within @sync_buf + * @seqno: the sequence # to signal on + * @ops: the fence_ops for operations on this seqno fence + * + * This function initializes a struct seqno_fence with passed parameters, + * and takes a reference on sync_buf which is released on fence destruction. + * + * A seqno_fence is a dma_fence which can complete in software when + * enable_signaling is called, but it also completes when + * (s32)((sync_buf)[seqno_ofs] - seqno) >= 0 is true + * + * The seqno_fence will take a refcount on the sync_buf until it's + * destroyed, but actual lifetime of sync_buf may be longer if one of the + * callers take a reference to it. + * + * Certain hardware have instructions to insert this type of wait condition + * in the command stream, so no intervention from software would be needed. + * This type of fence can be destroyed before completed, however a reference + * on the sync_buf dma-buf can be taken. It is encouraged to re-use the same + * dma-buf for sync_buf, since mapping or unmapping the sync_buf to the + * device's vm can be expensive. + * + * It is recommended for creators of seqno_fence to call fence_signal + * before destruction. This will prevent possible issues from wraparound at + * time of issue vs time of check, since users can check fence_is_signaled + * before submitting instructions for the hardware to wait on the fence. + * However, when ops.enable_signaling is not called, it doesn't have to be + * done as soon as possible, just before there's any real danger of seqno + * wraparound. + */ +static inline void +seqno_fence_init(struct seqno_fence *fence, spinlock_t *lock, + struct dma_buf *sync_buf, uint32_t context, uint32_t seqno_ofs, + uint32_t seqno, const struct fence_ops *ops) +{ + BUG_ON(!fence || !sync_buf || !ops->enable_signaling || !ops->wait); + + __fence_init(&fence->base, &seqno_fence_ops, lock, context, seqno); + + get_dma_buf(sync_buf); + fence->ops = ops; + fence->sync_buf = sync_buf; + fence->seqno_ofs = seqno_ofs; +} + +#endif /* __LINUX_SEQNO_FENCE_H */
This type of fence can be used with hardware synchronization for simple hardware that can block execution until the condition (dma_buf[offset] - value) >= 0 has been met. A software fallback still has to be provided in case the fence is used with a device that doesn't support this mechanism. It is useful to expose this for graphics cards that have an op to support this. Some cards like i915 can export those, but don't have an option to wait, so they need the software fallback. I extended the original patch by Rob Clark. v1: Original v2: Renamed from bikeshed to seqno, moved into dma-fence.c since not much was left of the file. Lots of documentation added. v3: Use fence_ops instead of custom callbacks. Moved to own file to avoid circular dependency between dma-buf.h and fence.h v4: Add spinlock pointer to seqno_fence_init Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> --- Documentation/DocBook/device-drivers.tmpl | 1 + drivers/base/fence.c | 38 +++++++++++ include/linux/seqno-fence.h | 105 ++++++++++++++++++++++++++++++ 3 files changed, 144 insertions(+) create mode 100644 include/linux/seqno-fence.h