diff mbox

[v5,8/9] ARM: davinci: da850 board: Added .reserve function and rproc platform registration

Message ID 1357863807-380-9-git-send-email-rtivy@ti.com (mailing list archive)
State Changes Requested
Headers show

Commit Message

Tivy, Robert Jan. 11, 2013, 12:23 a.m. UTC 
Added .reserve function for reserving CMA memory block to MACHINE_START.

Added call to remoteproc platform device registration function during init.

Signed-off-by: Robert Tivy <rtivy@ti.com>
---
 arch/arm/mach-davinci/board-da850-evm.c     |    6 ++++++
 arch/arm/mach-davinci/board-omapl138-hawk.c |    6 ++++++
 2 files changed, 12 insertions(+)

Comments

Sekhar Nori Jan. 21, 2013, 8:36 a.m. UTC | #1 
On 1/11/2013 5:53 AM, Robert Tivy wrote:
> Added .reserve function for reserving CMA memory block to MACHINE_START.
> 
> Added call to remoteproc platform device registration function during init.
> 
> Signed-off-by: Robert Tivy <rtivy@ti.com>

Looks good to me. I will apply after the driver is accepted.

Thanks,
Sekhar
diff mbox

Patch

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index fae66e3..140f8c6 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1561,6 +1561,11 @@  static __init void da850_evm_init(void)
 		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
 
 	da850_evm_setup_mac_addr();
+
+	ret = da8xx_register_rproc();
+	if (ret)
+		pr_warn("%s: dsp/rproc registration failed: %d\n",
+			__func__, ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -1588,4 +1593,5 @@  MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
+	.reserve	= da8xx_rproc_reserve_cma,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index d5a6bcd..f60cfd1 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -311,6 +311,11 @@  static __init void omapl138_hawk_init(void)
 	if (ret)
 		pr_warn("%s: watchdog registration failed: %d\n",
 			__func__, ret);
+
+	ret = da8xx_register_rproc();
+	if (ret)
+		pr_warn("%s: dsp/rproc registration failed: %d\n",
+			__func__, ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -338,4 +343,5 @@  MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
+	.reserve	= da8xx_rproc_reserve_cma,
 MACHINE_END