diff mbox

[2/4] drm/i2c: nxp-tda998x (v2)

Message ID 1358894185-21617-3-git-send-email-robdclark@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Rob Clark Jan. 22, 2013, 10:36 p.m. UTC
Driver for the NXP TDA998X i2c hdmi encoder slave.

v1: original
v2: fix npix/nline programming

Signed-off-by: Rob Clark <robdclark@gmail.com>
---
 drivers/gpu/drm/i2c/Makefile      |   3 +
 drivers/gpu/drm/i2c/tda998x_drv.c | 908 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 911 insertions(+)
 create mode 100644 drivers/gpu/drm/i2c/tda998x_drv.c

Comments

Koen Kooi Jan. 23, 2013, 7:44 a.m. UTC | #1
Op 22 jan. 2013, om 23:36 heeft Rob Clark <robdclark@gmail.com> het volgende geschreven:

> Driver for the NXP TDA998X i2c hdmi encoder slave.
> 
> v1: original
> v2: fix npix/nline programming
> 
> Signed-off-by: Rob Clark <robdclark@gmail.com>

Tested on a  beaglebone-black:

Tested-by: Koen Kooi <koen@dominion.thruhere.net>
Jean-Francois Moine Jan. 23, 2013, 9:42 a.m. UTC | #2
On Tue, 22 Jan 2013 16:36:23 -0600
Rob Clark <robdclark@gmail.com> wrote:

> Driver for the NXP TDA998X i2c hdmi encoder slave.
> 
> v1: original
> v2: fix npix/nline programming
> 
> Signed-off-by: Rob Clark <robdclark@gmail.com>
> ---
>  drivers/gpu/drm/i2c/Makefile      |   3 +
>  drivers/gpu/drm/i2c/tda998x_drv.c | 908 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 911 insertions(+)
>  create mode 100644 drivers/gpu/drm/i2c/tda998x_drv.c
	[snip]
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> new file mode 100644
> index 0000000..02054e8
> --- /dev/null
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -0,0 +1,908 @@
	[snip]
> +static void __exit
> +tda998x_exit(void)
> +{
> +	DBG("");
> +	drm_i2c_encoder_unregister(&tda998x_driver);
> +}
> +
> +MODULE_DESCRIPTION("NXP Semiconductors TDA998X TMDS transmitter driver");
> +
> +MODULE_AUTHOR("Rob Clark <robdclark@gmail.com");
> +MODULE_DESCRIPTION("NXP Semiconductors TDA998X HDMI Encoder");
> +MODULE_LICENSE("GPL");
> +
> +module_init(tda998x_init);
> +module_exit(tda998x_exit);

There are 2 MODULE_DESCRIPTION().
Rob Clark Jan. 23, 2013, 1:25 p.m. UTC | #3
On Wed, Jan 23, 2013 at 3:42 AM, Jean-Francois Moine <moinejf@free.fr> wrote:
> On Tue, 22 Jan 2013 16:36:23 -0600
> Rob Clark <robdclark@gmail.com> wrote:
>
>> Driver for the NXP TDA998X i2c hdmi encoder slave.
>>
>> v1: original
>> v2: fix npix/nline programming
>>
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>> ---
>>  drivers/gpu/drm/i2c/Makefile      |   3 +
>>  drivers/gpu/drm/i2c/tda998x_drv.c | 908 ++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 911 insertions(+)
>>  create mode 100644 drivers/gpu/drm/i2c/tda998x_drv.c
>         [snip]
>> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
>> new file mode 100644
>> index 0000000..02054e8
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
>> @@ -0,0 +1,908 @@
>         [snip]
>> +static void __exit
>> +tda998x_exit(void)
>> +{
>> +     DBG("");
>> +     drm_i2c_encoder_unregister(&tda998x_driver);
>> +}
>> +
>> +MODULE_DESCRIPTION("NXP Semiconductors TDA998X TMDS transmitter driver");
>> +
>> +MODULE_AUTHOR("Rob Clark <robdclark@gmail.com");
>> +MODULE_DESCRIPTION("NXP Semiconductors TDA998X HDMI Encoder");
>> +MODULE_LICENSE("GPL");
>> +
>> +module_init(tda998x_init);
>> +module_exit(tda998x_exit);
>
> There are 2 MODULE_DESCRIPTION().

oh, whoops.. I'll fix that

BR,
-R

> --
> Ken ar c'hentaƱ |             ** Breizh ha Linux atav! **
> Jef             |               http://moinejf.free.fr/
Daniel Vetter Jan. 24, 2013, 11:57 a.m. UTC | #4
On Tue, Jan 22, 2013 at 04:36:23PM -0600, Rob Clark wrote:
> Driver for the NXP TDA998X i2c hdmi encoder slave.
> 
> v1: original
> v2: fix npix/nline programming
> 
> Signed-off-by: Rob Clark <robdclark@gmail.com>

Just one bikeshed, otherwise

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

[cut]

> +static void
> +reg_set(struct drm_encoder *encoder, uint16_t reg, uint8_t val)
> +{
> +	reg_write(encoder, reg, reg_read(encoder, reg) | val);
> +}
> +
> +static void
> +reg_clear(struct drm_encoder *encoder, uint16_t reg, uint8_t val)
> +{
> +	reg_write(encoder, reg, reg_read(encoder, reg) & ~val);
> +}

What about drivers/base/regmap? I haven't looked to closely yet and never
used it in code, but there's a presentation [1] and it sounds like it
provides some nice (and more important standardized) helper stuff for
debug, tracing, ...

Since encoder slave drivers tend to be utterly boring register bashing and
we expect tons of time, I think high levels of standardization would be
really useful. Care to look into this a bit?

Cheers, Daniel

1: http://free-electrons.com/blog/fosdem2012-videos/
Rob Clark Jan. 24, 2013, 2:10 p.m. UTC | #5
On Thu, Jan 24, 2013 at 5:57 AM, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Tue, Jan 22, 2013 at 04:36:23PM -0600, Rob Clark wrote:
>> Driver for the NXP TDA998X i2c hdmi encoder slave.
>>
>> v1: original
>> v2: fix npix/nline programming
>>
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>
> Just one bikeshed, otherwise
>
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>
> [cut]
>
>> +static void
>> +reg_set(struct drm_encoder *encoder, uint16_t reg, uint8_t val)
>> +{
>> +     reg_write(encoder, reg, reg_read(encoder, reg) | val);
>> +}
>> +
>> +static void
>> +reg_clear(struct drm_encoder *encoder, uint16_t reg, uint8_t val)
>> +{
>> +     reg_write(encoder, reg, reg_read(encoder, reg) & ~val);
>> +}
>
> What about drivers/base/regmap? I haven't looked to closely yet and never
> used it in code, but there's a presentation [1] and it sounds like it
> provides some nice (and more important standardized) helper stuff for
> debug, tracing, ...
>
> Since encoder slave drivers tend to be utterly boring register bashing and
> we expect tons of time, I think high levels of standardization would be
> really useful. Care to look into this a bit?

I did look at regmap.. what convinced me against using it was that if
you don't use cached mode, it ends up writing the page selector
register for every read/write.  And I don't have enough actual
documentation about this nxp part to know the reset values of all the
registers in order to use caching.

BR,
-R

> Cheers, Daniel
>
> 1: http://free-electrons.com/blog/fosdem2012-videos/
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
diff mbox

Patch

diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 9286256..43aa33b 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -5,3 +5,6 @@  obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
 
 sil164-y := sil164_drv.o
 obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o
+
+tda998x-y := tda998x_drv.o
+obj-$(CONFIG_DRM_I2C_NXP_TDA998X) += tda998x.o
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
new file mode 100644
index 0000000..02054e8
--- /dev/null
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -0,0 +1,908 @@ 
+/*
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+
+#include <linux/module.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_encoder_slave.h>
+#include <drm/drm_edid.h>
+
+
+#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
+
+struct tda998x_priv {
+	struct i2c_client *cec;
+	uint16_t rev;
+	uint8_t current_page;
+	int dpms;
+};
+
+#define to_tda998x_priv(x)  ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
+
+/* The TDA9988 series of devices use a paged register scheme.. to simplify
+ * things we encode the page # in upper bits of the register #.  To read/
+ * write a given register, we need to make sure CURPAGE register is set
+ * appropriately.  Which implies reads/writes are not atomic.  Fun!
+ */
+
+#define REG(page, addr) (((page) << 8) | (addr))
+#define REG2ADDR(reg)   ((reg) & 0xff)
+#define REG2PAGE(reg)   (((reg) >> 8) & 0xff)
+
+#define REG_CURPAGE               0xff                /* write */
+
+
+/* Page 00h: General Control */
+#define REG_VERSION_LSB           REG(0x00, 0x00)     /* read */
+#define REG_MAIN_CNTRL0           REG(0x00, 0x01)     /* read/write */
+# define MAIN_CNTRL0_SR           (1 << 0)
+# define MAIN_CNTRL0_DECS         (1 << 1)
+# define MAIN_CNTRL0_DEHS         (1 << 2)
+# define MAIN_CNTRL0_CECS         (1 << 3)
+# define MAIN_CNTRL0_CEHS         (1 << 4)
+# define MAIN_CNTRL0_SCALER       (1 << 7)
+#define REG_VERSION_MSB           REG(0x00, 0x02)     /* read */
+#define REG_SOFTRESET             REG(0x00, 0x0a)     /* write */
+# define SOFTRESET_AUDIO          (1 << 0)
+# define SOFTRESET_I2C_MASTER     (1 << 1)
+#define REG_DDC_DISABLE           REG(0x00, 0x0b)     /* read/write */
+#define REG_CCLK_ON               REG(0x00, 0x0c)     /* read/write */
+#define REG_I2C_MASTER            REG(0x00, 0x0d)     /* read/write */
+# define I2C_MASTER_DIS_MM        (1 << 0)
+# define I2C_MASTER_DIS_FILT      (1 << 1)
+# define I2C_MASTER_APP_STRT_LAT  (1 << 2)
+#define REG_INT_FLAGS_0           REG(0x00, 0x0f)     /* read/write */
+#define REG_INT_FLAGS_1           REG(0x00, 0x10)     /* read/write */
+#define REG_INT_FLAGS_2           REG(0x00, 0x11)     /* read/write */
+# define INT_FLAGS_2_EDID_BLK_RD  (1 << 1)
+#define REG_ENA_VP_0              REG(0x00, 0x18)     /* read/write */
+#define REG_ENA_VP_1              REG(0x00, 0x19)     /* read/write */
+#define REG_ENA_VP_2              REG(0x00, 0x1a)     /* read/write */
+#define REG_ENA_AP                REG(0x00, 0x1e)     /* read/write */
+#define REG_VIP_CNTRL_0           REG(0x00, 0x20)     /* write */
+# define VIP_CNTRL_0_MIRR_A       (1 << 7)
+# define VIP_CNTRL_0_SWAP_A(x)    (((x) & 7) << 4)
+# define VIP_CNTRL_0_MIRR_B       (1 << 3)
+# define VIP_CNTRL_0_SWAP_B(x)    (((x) & 7) << 0)
+#define REG_VIP_CNTRL_1           REG(0x00, 0x21)     /* write */
+# define VIP_CNTRL_1_MIRR_C       (1 << 7)
+# define VIP_CNTRL_1_SWAP_C(x)    (((x) & 7) << 4)
+# define VIP_CNTRL_1_MIRR_D       (1 << 3)
+# define VIP_CNTRL_1_SWAP_D(x)    (((x) & 7) << 0)
+#define REG_VIP_CNTRL_2           REG(0x00, 0x22)     /* write */
+# define VIP_CNTRL_2_MIRR_E       (1 << 7)
+# define VIP_CNTRL_2_SWAP_E(x)    (((x) & 7) << 4)
+# define VIP_CNTRL_2_MIRR_F       (1 << 3)
+# define VIP_CNTRL_2_SWAP_F(x)    (((x) & 7) << 0)
+#define REG_VIP_CNTRL_3           REG(0x00, 0x23)     /* write */
+# define VIP_CNTRL_3_X_TGL        (1 << 0)
+# define VIP_CNTRL_3_H_TGL        (1 << 1)
+# define VIP_CNTRL_3_V_TGL        (1 << 2)
+# define VIP_CNTRL_3_EMB          (1 << 3)
+# define VIP_CNTRL_3_SYNC_DE      (1 << 4)
+# define VIP_CNTRL_3_SYNC_HS      (1 << 5)
+# define VIP_CNTRL_3_DE_INT       (1 << 6)
+# define VIP_CNTRL_3_EDGE         (1 << 7)
+#define REG_VIP_CNTRL_4           REG(0x00, 0x24)     /* write */
+# define VIP_CNTRL_4_BLC(x)       (((x) & 3) << 0)
+# define VIP_CNTRL_4_BLANKIT(x)   (((x) & 3) << 2)
+# define VIP_CNTRL_4_CCIR656      (1 << 4)
+# define VIP_CNTRL_4_656_ALT      (1 << 5)
+# define VIP_CNTRL_4_TST_656      (1 << 6)
+# define VIP_CNTRL_4_TST_PAT      (1 << 7)
+#define REG_VIP_CNTRL_5           REG(0x00, 0x25)     /* write */
+# define VIP_CNTRL_5_CKCASE       (1 << 0)
+# define VIP_CNTRL_5_SP_CNT(x)    (((x) & 3) << 1)
+#define REG_MAT_CONTRL            REG(0x00, 0x80)     /* write */
+# define MAT_CONTRL_MAT_SC(x)     (((x) & 3) << 0)
+# define MAT_CONTRL_MAT_BP        (1 << 2)
+#define REG_VIDFORMAT             REG(0x00, 0xa0)     /* write */
+#define REG_REFPIX_MSB            REG(0x00, 0xa1)     /* write */
+#define REG_REFPIX_LSB            REG(0x00, 0xa2)     /* write */
+#define REG_REFLINE_MSB           REG(0x00, 0xa3)     /* write */
+#define REG_REFLINE_LSB           REG(0x00, 0xa4)     /* write */
+#define REG_NPIX_MSB              REG(0x00, 0xa5)     /* write */
+#define REG_NPIX_LSB              REG(0x00, 0xa6)     /* write */
+#define REG_NLINE_MSB             REG(0x00, 0xa7)     /* write */
+#define REG_NLINE_LSB             REG(0x00, 0xa8)     /* write */
+#define REG_VS_LINE_STRT_1_MSB    REG(0x00, 0xa9)     /* write */
+#define REG_VS_LINE_STRT_1_LSB    REG(0x00, 0xaa)     /* write */
+#define REG_VS_PIX_STRT_1_MSB     REG(0x00, 0xab)     /* write */
+#define REG_VS_PIX_STRT_1_LSB     REG(0x00, 0xac)     /* write */
+#define REG_VS_LINE_END_1_MSB     REG(0x00, 0xad)     /* write */
+#define REG_VS_LINE_END_1_LSB     REG(0x00, 0xae)     /* write */
+#define REG_VS_PIX_END_1_MSB      REG(0x00, 0xaf)     /* write */
+#define REG_VS_PIX_END_1_LSB      REG(0x00, 0xb0)     /* write */
+#define REG_VS_PIX_STRT_2_MSB     REG(0x00, 0xb3)     /* write */
+#define REG_VS_PIX_STRT_2_LSB     REG(0x00, 0xb4)     /* write */
+#define REG_VS_PIX_END_2_MSB      REG(0x00, 0xb7)     /* write */
+#define REG_VS_PIX_END_2_LSB      REG(0x00, 0xb8)     /* write */
+#define REG_HS_PIX_START_MSB      REG(0x00, 0xb9)     /* write */
+#define REG_HS_PIX_START_LSB      REG(0x00, 0xba)     /* write */
+#define REG_HS_PIX_STOP_MSB       REG(0x00, 0xbb)     /* write */
+#define REG_HS_PIX_STOP_LSB       REG(0x00, 0xbc)     /* write */
+#define REG_VWIN_START_1_MSB      REG(0x00, 0xbd)     /* write */
+#define REG_VWIN_START_1_LSB      REG(0x00, 0xbe)     /* write */
+#define REG_VWIN_END_1_MSB        REG(0x00, 0xbf)     /* write */
+#define REG_VWIN_END_1_LSB        REG(0x00, 0xc0)     /* write */
+#define REG_DE_START_MSB          REG(0x00, 0xc5)     /* write */
+#define REG_DE_START_LSB          REG(0x00, 0xc6)     /* write */
+#define REG_DE_STOP_MSB           REG(0x00, 0xc7)     /* write */
+#define REG_DE_STOP_LSB           REG(0x00, 0xc8)     /* write */
+#define REG_TBG_CNTRL_0           REG(0x00, 0xca)     /* write */
+# define TBG_CNTRL_0_FRAME_DIS    (1 << 5)
+# define TBG_CNTRL_0_SYNC_MTHD    (1 << 6)
+# define TBG_CNTRL_0_SYNC_ONCE    (1 << 7)
+#define REG_TBG_CNTRL_1           REG(0x00, 0xcb)     /* write */
+# define TBG_CNTRL_1_VH_TGL_0     (1 << 0)
+# define TBG_CNTRL_1_VH_TGL_1     (1 << 1)
+# define TBG_CNTRL_1_VH_TGL_2     (1 << 2)
+# define TBG_CNTRL_1_VHX_EXT_DE   (1 << 3)
+# define TBG_CNTRL_1_VHX_EXT_HS   (1 << 4)
+# define TBG_CNTRL_1_VHX_EXT_VS   (1 << 5)
+# define TBG_CNTRL_1_DWIN_DIS     (1 << 6)
+#define REG_ENABLE_SPACE          REG(0x00, 0xd6)     /* write */
+#define REG_HVF_CNTRL_0           REG(0x00, 0xe4)     /* write */
+# define HVF_CNTRL_0_SM           (1 << 7)
+# define HVF_CNTRL_0_RWB          (1 << 6)
+# define HVF_CNTRL_0_PREFIL(x)    (((x) & 3) << 2)
+# define HVF_CNTRL_0_INTPOL(x)    (((x) & 3) << 0)
+#define REG_HVF_CNTRL_1           REG(0x00, 0xe5)     /* write */
+# define HVF_CNTRL_1_FOR          (1 << 0)
+# define HVF_CNTRL_1_YUVBLK       (1 << 1)
+# define HVF_CNTRL_1_VQR(x)       (((x) & 3) << 2)
+# define HVF_CNTRL_1_PAD(x)       (((x) & 3) << 4)
+# define HVF_CNTRL_1_SEMI_PLANAR  (1 << 6)
+#define REG_RPT_CNTRL             REG(0x00, 0xf0)     /* write */
+
+
+/* Page 02h: PLL settings */
+#define REG_PLL_SERIAL_1          REG(0x02, 0x00)     /* read/write */
+# define PLL_SERIAL_1_SRL_FDN     (1 << 0)
+# define PLL_SERIAL_1_SRL_IZ(x)   (((x) & 3) << 1)
+# define PLL_SERIAL_1_SRL_MAN_IZ  (1 << 6)
+#define REG_PLL_SERIAL_2          REG(0x02, 0x01)     /* read/write */
+# define PLL_SERIAL_2_SRL_NOSC(x) (((x) & 3) << 0)
+# define PLL_SERIAL_2_SRL_PR(x)   (((x) & 0xf) << 4)
+#define REG_PLL_SERIAL_3          REG(0x02, 0x02)     /* read/write */
+# define PLL_SERIAL_3_SRL_CCIR    (1 << 0)
+# define PLL_SERIAL_3_SRL_DE      (1 << 2)
+# define PLL_SERIAL_3_SRL_PXIN_SEL (1 << 4)
+#define REG_SERIALIZER            REG(0x02, 0x03)     /* read/write */
+#define REG_BUFFER_OUT            REG(0x02, 0x04)     /* read/write */
+#define REG_PLL_SCG1              REG(0x02, 0x05)     /* read/write */
+#define REG_PLL_SCG2              REG(0x02, 0x06)     /* read/write */
+#define REG_PLL_SCGN1             REG(0x02, 0x07)     /* read/write */
+#define REG_PLL_SCGN2             REG(0x02, 0x08)     /* read/write */
+#define REG_PLL_SCGR1             REG(0x02, 0x09)     /* read/write */
+#define REG_PLL_SCGR2             REG(0x02, 0x0a)     /* read/write */
+#define REG_AUDIO_DIV             REG(0x02, 0x0e)     /* read/write */
+#define REG_SEL_CLK               REG(0x02, 0x11)     /* read/write */
+# define SEL_CLK_SEL_CLK1         (1 << 0)
+# define SEL_CLK_SEL_VRF_CLK(x)   (((x) & 3) << 1)
+# define SEL_CLK_ENA_SC_CLK       (1 << 3)
+#define REG_ANA_GENERAL           REG(0x02, 0x12)     /* read/write */
+
+
+/* Page 09h: EDID Control */
+#define REG_EDID_DATA_0           REG(0x09, 0x00)     /* read */
+/* next 127 successive registers are the EDID block */
+#define REG_EDID_CTRL             REG(0x09, 0xfa)     /* read/write */
+#define REG_DDC_ADDR              REG(0x09, 0xfb)     /* read/write */
+#define REG_DDC_OFFS              REG(0x09, 0xfc)     /* read/write */
+#define REG_DDC_SEGM_ADDR         REG(0x09, 0xfd)     /* read/write */
+#define REG_DDC_SEGM              REG(0x09, 0xfe)     /* read/write */
+
+
+/* Page 10h: information frames and packets */
+
+
+/* Page 11h: audio settings and content info packets */
+#define REG_AIP_CNTRL_0           REG(0x11, 0x00)     /* read/write */
+# define AIP_CNTRL_0_RST_FIFO     (1 << 0)
+# define AIP_CNTRL_0_SWAP         (1 << 1)
+# define AIP_CNTRL_0_LAYOUT       (1 << 2)
+# define AIP_CNTRL_0_ACR_MAN      (1 << 5)
+# define AIP_CNTRL_0_RST_CTS      (1 << 6)
+#define REG_ENC_CNTRL             REG(0x11, 0x0d)     /* read/write */
+# define ENC_CNTRL_RST_ENC        (1 << 0)
+# define ENC_CNTRL_RST_SEL        (1 << 1)
+# define ENC_CNTRL_CTL_CODE(x)    (((x) & 3) << 2)
+
+
+/* Page 12h: HDCP and OTP */
+#define REG_TX3                   REG(0x12, 0x9a)     /* read/write */
+#define REG_TX33                  REG(0x12, 0xb8)     /* read/write */
+# define TX33_HDMI                (1 << 1)
+
+
+/* Page 13h: Gamut related metadata packets */
+
+
+
+/* CEC registers: (not paged)
+ */
+#define REG_CEC_FRO_IM_CLK_CTRL   0xfb                /* read/write */
+# define CEC_FRO_IM_CLK_CTRL_GHOST_DIS (1 << 7)
+# define CEC_FRO_IM_CLK_CTRL_ENA_OTP   (1 << 6)
+# define CEC_FRO_IM_CLK_CTRL_IMCLK_SEL (1 << 1)
+# define CEC_FRO_IM_CLK_CTRL_FRO_DIV   (1 << 0)
+#define REG_CEC_RXSHPDLEV         0xfe                /* read */
+# define CEC_RXSHPDLEV_RXSENS     (1 << 0)
+# define CEC_RXSHPDLEV_HPD        (1 << 1)
+
+#define REG_CEC_ENAMODS           0xff                /* read/write */
+# define CEC_ENAMODS_DIS_FRO      (1 << 6)
+# define CEC_ENAMODS_DIS_CCLK     (1 << 5)
+# define CEC_ENAMODS_EN_RXSENS    (1 << 2)
+# define CEC_ENAMODS_EN_HDMI      (1 << 1)
+# define CEC_ENAMODS_EN_CEC       (1 << 0)
+
+
+/* Device versions: */
+#define TDA9989N2                 0x0101
+#define TDA19989                  0x0201
+#define TDA19989N2                0x0202
+#define TDA19988                  0x0301
+
+static void
+cec_write(struct drm_encoder *encoder, uint16_t addr, uint8_t val)
+{
+	struct i2c_client *client = to_tda998x_priv(encoder)->cec;
+	uint8_t buf[] = {addr, val};
+	int ret;
+
+	ret = i2c_master_send(client, buf, ARRAY_SIZE(buf));
+	if (ret < 0)
+		dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr);
+}
+
+static uint8_t
+cec_read(struct drm_encoder *encoder, uint8_t addr)
+{
+	struct i2c_client *client = to_tda998x_priv(encoder)->cec;
+	uint8_t val;
+	int ret;
+
+	ret = i2c_master_send(client, &addr, sizeof(addr));
+	if (ret < 0)
+		goto fail;
+
+	ret = i2c_master_recv(client, &val, sizeof(val));
+	if (ret < 0)
+		goto fail;
+
+	return val;
+
+fail:
+	dev_err(&client->dev, "Error %d reading from cec:0x%x\n", ret, addr);
+	return 0;
+}
+
+static void
+set_page(struct drm_encoder *encoder, uint16_t reg)
+{
+	struct tda998x_priv *priv = to_tda998x_priv(encoder);
+
+	if (REG2PAGE(reg) != priv->current_page) {
+		struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+		uint8_t buf[] = {
+				REG_CURPAGE, REG2PAGE(reg)
+		};
+		int ret = i2c_master_send(client, buf, sizeof(buf));
+		if (ret < 0)
+			dev_err(&client->dev, "Error %d writing to REG_CURPAGE\n", ret);
+
+		priv->current_page = REG2PAGE(reg);
+	}
+}
+
+static int
+reg_read_range(struct drm_encoder *encoder, uint16_t reg, char *buf, int cnt)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	uint8_t addr = REG2ADDR(reg);
+	int ret;
+
+	set_page(encoder, reg);
+
+	ret = i2c_master_send(client, &addr, sizeof(addr));
+	if (ret < 0)
+		goto fail;
+
+	ret = i2c_master_recv(client, buf, cnt);
+	if (ret < 0)
+		goto fail;
+
+	return ret;
+
+fail:
+	dev_err(&client->dev, "Error %d reading from 0x%x\n", ret, reg);
+	return ret;
+}
+
+static uint8_t
+reg_read(struct drm_encoder *encoder, uint16_t reg)
+{
+	uint8_t val = 0;
+	reg_read_range(encoder, reg, &val, sizeof(val));
+	return val;
+}
+
+static void
+reg_write(struct drm_encoder *encoder, uint16_t reg, uint8_t val)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	uint8_t buf[] = {REG2ADDR(reg), val};
+	int ret;
+
+	set_page(encoder, reg);
+
+	ret = i2c_master_send(client, buf, ARRAY_SIZE(buf));
+	if (ret < 0)
+		dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
+}
+
+static void
+reg_write16(struct drm_encoder *encoder, uint16_t reg, uint16_t val)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	uint8_t buf[] = {REG2ADDR(reg), val >> 8, val};
+	int ret;
+
+	set_page(encoder, reg);
+
+	ret = i2c_master_send(client, buf, ARRAY_SIZE(buf));
+	if (ret < 0)
+		dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
+}
+
+static void
+reg_set(struct drm_encoder *encoder, uint16_t reg, uint8_t val)
+{
+	reg_write(encoder, reg, reg_read(encoder, reg) | val);
+}
+
+static void
+reg_clear(struct drm_encoder *encoder, uint16_t reg, uint8_t val)
+{
+	reg_write(encoder, reg, reg_read(encoder, reg) & ~val);
+}
+
+static void
+tda998x_reset(struct drm_encoder *encoder)
+{
+	/* reset audio and i2c master: */
+	reg_set(encoder, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER);
+	msleep(50);
+	reg_clear(encoder, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER);
+	msleep(50);
+
+	/* reset transmitter: */
+	reg_set(encoder, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR);
+	reg_clear(encoder, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR);
+
+	/* PLL registers common configuration */
+	reg_write(encoder, REG_PLL_SERIAL_1, 0x00);
+	reg_write(encoder, REG_PLL_SERIAL_2, PLL_SERIAL_2_SRL_NOSC(1));
+	reg_write(encoder, REG_PLL_SERIAL_3, 0x00);
+	reg_write(encoder, REG_SERIALIZER,   0x00);
+	reg_write(encoder, REG_BUFFER_OUT,   0x00);
+	reg_write(encoder, REG_PLL_SCG1,     0x00);
+	reg_write(encoder, REG_AUDIO_DIV,    0x03);
+	reg_write(encoder, REG_SEL_CLK,      SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK);
+	reg_write(encoder, REG_PLL_SCGN1,    0xfa);
+	reg_write(encoder, REG_PLL_SCGN2,    0x00);
+	reg_write(encoder, REG_PLL_SCGR1,    0x5b);
+	reg_write(encoder, REG_PLL_SCGR2,    0x00);
+	reg_write(encoder, REG_PLL_SCG2,     0x10);
+}
+
+/* DRM encoder functions */
+
+static void
+tda998x_encoder_set_config(struct drm_encoder *encoder, void *params)
+{
+}
+
+static void
+tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct tda998x_priv *priv = to_tda998x_priv(encoder);
+
+	/* we only care about on or off: */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == priv->dpms)
+		return;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		/* enable audio and video ports */
+		reg_write(encoder, REG_ENA_AP, 0xff);
+		reg_write(encoder, REG_ENA_VP_0, 0xff);
+		reg_write(encoder, REG_ENA_VP_1, 0xff);
+		reg_write(encoder, REG_ENA_VP_2, 0xff);
+		/* set muxing after enabling ports: */
+		reg_write(encoder, REG_VIP_CNTRL_0,
+				VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3));
+		reg_write(encoder, REG_VIP_CNTRL_1,
+				VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1));
+		reg_write(encoder, REG_VIP_CNTRL_2,
+				VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5));
+		break;
+	case DRM_MODE_DPMS_OFF:
+		/* disable audio and video ports */
+		reg_write(encoder, REG_ENA_AP, 0x00);
+		reg_write(encoder, REG_ENA_VP_0, 0x00);
+		reg_write(encoder, REG_ENA_VP_1, 0x00);
+		reg_write(encoder, REG_ENA_VP_2, 0x00);
+		break;
+	}
+
+	priv->dpms = mode;
+}
+
+static void
+tda998x_encoder_save(struct drm_encoder *encoder)
+{
+	DBG("");
+}
+
+static void
+tda998x_encoder_restore(struct drm_encoder *encoder)
+{
+	DBG("");
+}
+
+static bool
+tda998x_encoder_mode_fixup(struct drm_encoder *encoder,
+			  const struct drm_display_mode *mode,
+			  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static int
+tda998x_encoder_mode_valid(struct drm_encoder *encoder,
+			  struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static void
+tda998x_encoder_mode_set(struct drm_encoder *encoder,
+			struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode)
+{
+	struct tda998x_priv *priv = to_tda998x_priv(encoder);
+	uint16_t hs_start, hs_end, line_start, line_end;
+	uint16_t vwin_start, vwin_end, de_start, de_end;
+	uint16_t ref_pix, ref_line, pix_start2;
+	uint8_t reg, div, rep;
+
+	hs_start   = mode->hsync_start - mode->hdisplay;
+	hs_end     = mode->hsync_end - mode->hdisplay;
+	line_start = 1;
+	line_end   = 1 + mode->vsync_end - mode->vsync_start;
+	vwin_start = mode->vtotal - mode->vsync_start;
+	vwin_end   = vwin_start + mode->vdisplay;
+	de_start   = mode->htotal - mode->hdisplay;
+	de_end     = mode->htotal;
+
+	pix_start2 = 0;
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		pix_start2 = (mode->htotal / 2) + hs_start;
+
+	/* TODO how is this value calculated?  It is 2 for all common
+	 * formats in the tables in out of tree nxp driver (assuming
+	 * I've properly deciphered their byzantine table system)
+	 */
+	ref_line = 2;
+
+	/* this might changes for other color formats from the CRTC: */
+	ref_pix = 3 + hs_start;
+
+	div = 148500 / mode->clock;
+
+	DBG("clock=%d, div=%u", mode->clock, div);
+	DBG("hs_start=%u, hs_end=%u, line_start=%u, line_end=%u",
+			hs_start, hs_end, line_start, line_end);
+	DBG("vwin_start=%u, vwin_end=%u, de_start=%u, de_end=%u",
+			vwin_start, vwin_end, de_start, de_end);
+	DBG("ref_line=%u, ref_pix=%u, pix_start2=%u",
+			ref_line, ref_pix, pix_start2);
+
+	/* mute the audio FIFO: */
+	reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
+
+	/* set HDMI HDCP mode off: */
+	reg_set(encoder, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS);
+	reg_clear(encoder, REG_TX33, TX33_HDMI);
+
+	reg_write(encoder, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(0));
+	/* no pre-filter or interpolator: */
+	reg_write(encoder, REG_HVF_CNTRL_0, HVF_CNTRL_0_PREFIL(0) |
+			HVF_CNTRL_0_INTPOL(0));
+	reg_write(encoder, REG_VIP_CNTRL_5, VIP_CNTRL_5_SP_CNT(0));
+	reg_write(encoder, REG_VIP_CNTRL_4, VIP_CNTRL_4_BLANKIT(0) |
+			VIP_CNTRL_4_BLC(0));
+	reg_clear(encoder, REG_PLL_SERIAL_3, PLL_SERIAL_3_SRL_CCIR);
+
+	reg_clear(encoder, REG_PLL_SERIAL_1, PLL_SERIAL_1_SRL_MAN_IZ);
+	reg_clear(encoder, REG_PLL_SERIAL_3, PLL_SERIAL_3_SRL_DE);
+	reg_write(encoder, REG_SERIALIZER, 0);
+	reg_write(encoder, REG_HVF_CNTRL_1, HVF_CNTRL_1_VQR(0));
+
+	/* TODO enable pixel repeat for pixel rates less than 25Msamp/s */
+	rep = 0;
+	reg_write(encoder, REG_RPT_CNTRL, 0);
+	reg_write(encoder, REG_SEL_CLK, SEL_CLK_SEL_VRF_CLK(0) |
+			SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK);
+
+	reg_write(encoder, REG_PLL_SERIAL_2, PLL_SERIAL_2_SRL_NOSC(div) |
+			PLL_SERIAL_2_SRL_PR(rep));
+
+	reg_write16(encoder, REG_VS_PIX_STRT_2_MSB, pix_start2);
+	reg_write16(encoder, REG_VS_PIX_END_2_MSB, pix_start2);
+
+	/* set color matrix bypass flag: */
+	reg_set(encoder, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP);
+
+	/* set BIAS tmds value: */
+	reg_write(encoder, REG_ANA_GENERAL, 0x09);
+
+	reg_clear(encoder, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_MTHD);
+
+	reg_write(encoder, REG_VIP_CNTRL_3, 0);
+	reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_SYNC_HS);
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_V_TGL);
+
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_H_TGL);
+
+	reg_write(encoder, REG_VIDFORMAT, 0x00);
+	reg_write16(encoder, REG_NPIX_MSB, mode->hdisplay - 1);
+	reg_write16(encoder, REG_NLINE_MSB, mode->vdisplay - 1);
+	reg_write16(encoder, REG_VS_LINE_STRT_1_MSB, line_start);
+	reg_write16(encoder, REG_VS_LINE_END_1_MSB, line_end);
+	reg_write16(encoder, REG_VS_PIX_STRT_1_MSB, hs_start);
+	reg_write16(encoder, REG_VS_PIX_END_1_MSB, hs_start);
+	reg_write16(encoder, REG_HS_PIX_START_MSB, hs_start);
+	reg_write16(encoder, REG_HS_PIX_STOP_MSB, hs_end);
+	reg_write16(encoder, REG_VWIN_START_1_MSB, vwin_start);
+	reg_write16(encoder, REG_VWIN_END_1_MSB, vwin_end);
+	reg_write16(encoder, REG_DE_START_MSB, de_start);
+	reg_write16(encoder, REG_DE_STOP_MSB, de_end);
+
+	if (priv->rev == TDA19988) {
+		/* let incoming pixels fill the active space (if any) */
+		reg_write(encoder, REG_ENABLE_SPACE, 0x01);
+	}
+
+	reg_write16(encoder, REG_REFPIX_MSB, ref_pix);
+	reg_write16(encoder, REG_REFLINE_MSB, ref_line);
+
+	reg = TBG_CNTRL_1_VHX_EXT_DE |
+			TBG_CNTRL_1_VHX_EXT_HS |
+			TBG_CNTRL_1_VHX_EXT_VS |
+			TBG_CNTRL_1_DWIN_DIS | /* HDCP off */
+			TBG_CNTRL_1_VH_TGL_2;
+	if (mode->flags & (DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC))
+		reg |= TBG_CNTRL_1_VH_TGL_0;
+	reg_set(encoder, REG_TBG_CNTRL_1, reg);
+
+	/* must be last register set: */
+	reg_clear(encoder, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_ONCE);
+}
+
+static enum drm_connector_status
+tda998x_encoder_detect(struct drm_encoder *encoder,
+		      struct drm_connector *connector)
+{
+	uint8_t val = cec_read(encoder, REG_CEC_RXSHPDLEV);
+	return (val & CEC_RXSHPDLEV_HPD) ? connector_status_connected :
+			connector_status_disconnected;
+}
+
+static int
+read_edid_block(struct drm_encoder *encoder, uint8_t *buf, int blk)
+{
+	uint8_t offset, segptr;
+	int ret, i;
+
+	/* enable EDID read irq: */
+	reg_set(encoder, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
+
+	offset = (blk & 1) ? 128 : 0;
+	segptr = blk / 2;
+
+	reg_write(encoder, REG_DDC_ADDR, 0xa0);
+	reg_write(encoder, REG_DDC_OFFS, offset);
+	reg_write(encoder, REG_DDC_SEGM_ADDR, 0x60);
+	reg_write(encoder, REG_DDC_SEGM, segptr);
+
+	/* enable reading EDID: */
+	reg_write(encoder, REG_EDID_CTRL, 0x1);
+
+	/* flag must be cleared by sw: */
+	reg_write(encoder, REG_EDID_CTRL, 0x0);
+
+	/* wait for block read to complete: */
+	for (i = 100; i > 0; i--) {
+		uint8_t val = reg_read(encoder, REG_INT_FLAGS_2);
+		if (val & INT_FLAGS_2_EDID_BLK_RD)
+			break;
+		msleep(1);
+	}
+
+	if (i == 0)
+		return -ETIMEDOUT;
+
+	ret = reg_read_range(encoder, REG_EDID_DATA_0, buf, EDID_LENGTH);
+	if (ret != EDID_LENGTH) {
+		dev_err(encoder->dev->dev, "failed to read edid block %d: %d",
+				blk, ret);
+		return ret;
+	}
+
+	reg_clear(encoder, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
+
+	return 0;
+}
+
+static uint8_t *
+do_get_edid(struct drm_encoder *encoder)
+{
+	int j = 0, valid_extensions = 0;
+	uint8_t *block, *new;
+	bool print_bad_edid = drm_debug & DRM_UT_KMS;
+
+	if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
+		return NULL;
+
+	/* base block fetch */
+	if (read_edid_block(encoder, block, 0))
+		goto fail;
+
+	if (!drm_edid_block_valid(block, 0, print_bad_edid))
+		goto fail;
+
+	/* if there's no extensions, we're done */
+	if (block[0x7e] == 0)
+		return block;
+
+	new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL);
+	if (!new)
+		goto fail;
+	block = new;
+
+	for (j = 1; j <= block[0x7e]; j++) {
+		uint8_t *ext_block = block + (valid_extensions + 1) * EDID_LENGTH;
+		if (read_edid_block(encoder, ext_block, j))
+			goto fail;
+
+		if (!drm_edid_block_valid(ext_block, j, print_bad_edid))
+			goto fail;
+
+		valid_extensions++;
+	}
+
+	if (valid_extensions != block[0x7e]) {
+		block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
+		block[0x7e] = valid_extensions;
+		new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
+		if (!new)
+			goto fail;
+		block = new;
+	}
+
+	return block;
+
+fail:
+	dev_warn(encoder->dev->dev, "failed to read EDID\n");
+	kfree(block);
+	return NULL;
+}
+
+static int
+tda998x_encoder_get_modes(struct drm_encoder *encoder,
+			 struct drm_connector *connector)
+{
+	struct edid *edid = (struct edid *)do_get_edid(encoder);
+	int n = 0;
+
+	if (edid) {
+		drm_mode_connector_update_edid_property(connector, edid);
+		n = drm_add_edid_modes(connector, edid);
+		kfree(edid);
+	}
+
+	return n;
+}
+
+static int
+tda998x_encoder_create_resources(struct drm_encoder *encoder,
+				struct drm_connector *connector)
+{
+	DBG("");
+	return 0;
+}
+
+static int
+tda998x_encoder_set_property(struct drm_encoder *encoder,
+			    struct drm_connector *connector,
+			    struct drm_property *property,
+			    uint64_t val)
+{
+	DBG("");
+	return 0;
+}
+
+static void
+tda998x_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct tda998x_priv *priv = to_tda998x_priv(encoder);
+	drm_i2c_encoder_destroy(encoder);
+	kfree(priv);
+}
+
+static struct drm_encoder_slave_funcs tda998x_encoder_funcs = {
+	.set_config = tda998x_encoder_set_config,
+	.destroy = tda998x_encoder_destroy,
+	.dpms = tda998x_encoder_dpms,
+	.save = tda998x_encoder_save,
+	.restore = tda998x_encoder_restore,
+	.mode_fixup = tda998x_encoder_mode_fixup,
+	.mode_valid = tda998x_encoder_mode_valid,
+	.mode_set = tda998x_encoder_mode_set,
+	.detect = tda998x_encoder_detect,
+	.get_modes = tda998x_encoder_get_modes,
+	.create_resources = tda998x_encoder_create_resources,
+	.set_property = tda998x_encoder_set_property,
+};
+
+/* I2C driver functions */
+
+static int
+tda998x_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	return 0;
+}
+
+static int
+tda998x_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static int
+tda998x_encoder_init(struct i2c_client *client,
+		    struct drm_device *dev,
+		    struct drm_encoder_slave *encoder_slave)
+{
+	struct drm_encoder *encoder = &encoder_slave->base;
+	struct tda998x_priv *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->current_page = 0;
+	priv->cec = i2c_new_dummy(client->adapter, 0x34);
+	priv->dpms = DRM_MODE_DPMS_OFF;
+
+	encoder_slave->slave_priv = priv;
+	encoder_slave->slave_funcs = &tda998x_encoder_funcs;
+
+	/* wake up the device: */
+	cec_write(encoder, REG_CEC_ENAMODS,
+			CEC_ENAMODS_EN_RXSENS | CEC_ENAMODS_EN_HDMI);
+
+	tda998x_reset(encoder);
+
+	/* read version: */
+	priv->rev = reg_read(encoder, REG_VERSION_LSB) |
+			reg_read(encoder, REG_VERSION_MSB) << 8;
+
+	/* mask off feature bits: */
+	priv->rev &= ~0x30; /* not-hdcp and not-scalar bit */
+
+	switch (priv->rev) {
+	case TDA9989N2:  dev_info(dev->dev, "found TDA9989 n2");  break;
+	case TDA19989:   dev_info(dev->dev, "found TDA19989");    break;
+	case TDA19989N2: dev_info(dev->dev, "found TDA19989 n2"); break;
+	case TDA19988:   dev_info(dev->dev, "found TDA19988");    break;
+	default:
+		DBG("found unsupported device: %04x", priv->rev);
+		goto fail;
+	}
+
+	/* after reset, enable DDC: */
+	reg_write(encoder, REG_DDC_DISABLE, 0x00);
+
+	/* set clock on DDC channel: */
+	reg_write(encoder, REG_TX3, 39);
+
+	/* if necessary, disable multi-master: */
+	if (priv->rev == TDA19989)
+		reg_set(encoder, REG_I2C_MASTER, I2C_MASTER_DIS_MM);
+
+	cec_write(encoder, REG_CEC_FRO_IM_CLK_CTRL,
+			CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL);
+
+	return 0;
+
+fail:
+	/* if encoder_init fails, the encoder slave is never registered,
+	 * so cleanup here:
+	 */
+	if (priv->cec)
+		i2c_unregister_device(priv->cec);
+	kfree(priv);
+	encoder_slave->slave_priv = NULL;
+	encoder_slave->slave_funcs = NULL;
+	return -ENXIO;
+}
+
+static struct i2c_device_id tda998x_ids[] = {
+	{ "tda998x", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tda998x_ids);
+
+static struct drm_i2c_encoder_driver tda998x_driver = {
+	.i2c_driver = {
+		.probe = tda998x_probe,
+		.remove = tda998x_remove,
+		.driver = {
+			.name = "tda998x",
+		},
+		.id_table = tda998x_ids,
+	},
+	.encoder_init = tda998x_encoder_init,
+};
+
+/* Module initialization */
+
+static int __init
+tda998x_init(void)
+{
+	DBG("");
+	return drm_i2c_encoder_register(THIS_MODULE, &tda998x_driver);
+}
+
+static void __exit
+tda998x_exit(void)
+{
+	DBG("");
+	drm_i2c_encoder_unregister(&tda998x_driver);
+}
+
+MODULE_DESCRIPTION("NXP Semiconductors TDA998X TMDS transmitter driver");
+
+MODULE_AUTHOR("Rob Clark <robdclark@gmail.com");
+MODULE_DESCRIPTION("NXP Semiconductors TDA998X HDMI Encoder");
+MODULE_LICENSE("GPL");
+
+module_init(tda998x_init);
+module_exit(tda998x_exit);