new file mode 100644
@@ -0,0 +1,26 @@
+* Clock alias provision for TI OMAP2+ boards
+
+This binding allows the board's device tree file to specify a clock name,
+device phandle and clock alias so that that clock can be associated
+to the device with the alias.
+
+This is required in cases where an external device is clocked by an
+OMAP generated clock and needs to be assocated to it.
+
+NOTE: The node's name should be clock_alias
+
+Required properties
+- clock-name: The clock identifier string. Should be one of the
+ clock ids defined in OMAP common clock data.
+- clock-alias: A string specifying the alias that must be created to the clock.
+- device: A phandle to the device this clock should be associated to.
+
+e.g. On the OMAP4 Panda board, the USB PHY device is clocked by the
+FREF_CLK3 (auxclk3_ck) from the OMAP. The PHY driver expexts the clock to
+be named "main_clk". This binding can be provided like so
+
+clock_alias {
+ clock-name = "auxclk3_ck";
+ clock-alias = "main_clk";
+ device = <&hsusb1_phy>;
+};
@@ -15,6 +15,9 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
+#include <linux/clk.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
@@ -36,12 +39,76 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
{ }
};
+static int __init omap_create_clk_alias(struct device_node *np)
+{
+ int ret = 0;
+ const char *s, *alias;
+ char *clk_id;
+ struct device_node *dev_np;
+ struct platform_device *pdev;
+
+ of_property_read_string(np, "clock-name", &s);
+ if (!s) {
+ pr_err("%s: couldn't find clock-name property in node %s\n",
+ __func__, np->name);
+ return -ENODEV;
+ }
+
+ clk_id = kstrdup(s, GFP_KERNEL);
+ if (!clk_id)
+ return -ENOMEM;
+
+ dev_np = of_parse_phandle(np, "device", 0);
+ if (!dev_np) {
+ pr_err("%s: couldn't find device phandle for \'%s\'\n",
+ __func__, clk_id);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ pdev = of_find_device_by_node(dev_np);
+ if (!pdev) {
+ pr_err("%s: couldn't find device for clock \'%s\'\n",
+ __func__, clk_id);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ ret = of_property_read_string(np, "clock-alias", &alias);
+ if (ret) {
+ pr_err("%s: couldn't find alias for clock \'%s\'\n",
+ __func__, clk_id);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ ret = clk_add_alias(alias, dev_name(&pdev->dev), clk_id, NULL);
+ if (ret) {
+ pr_err("%s: couldn't add alias \'%s\' to clock \'%s\'\n",
+ __func__, alias, clk_id);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+exit:
+ kfree(clk_id);
+ return ret;
+}
+
static void __init omap_generic_init(void)
{
+ struct device_node *np;
+
omap_sdrc_init(NULL, NULL);
of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
+ /* create clock aliases based on 'clock_alias' nodes */
+ for_each_node_by_name(np, "clock_alias") {
+ omap_create_clk_alias(np);
+ of_node_put(np);
+ }
+
/*
* HACK: call display setup code for selected boards to enable omapdss.
* This will be removed when omapdss supports DT.
Currently on OMAP, it is not possible to specify a clock consumer to any of the OMAP generated clocks using the device tree. This can pose a problem for external devices that run off an OMAP clock as we can't reliably provide a reference to the clock in the device tree. This patch allows device trees to provide a node that contains the clock identifier, clock alias and the device phandle. The board initialization code then creates a clock alias to this clock id, and associates it with the device whose phandle was supplied. Discussion http://www.spinics.net/lists/linux-omap/msg86241.html CC: Russell King <linux@arm.linux.org.uk> CC: Rajendra Nayak <rnayak@ti.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> --- .../devicetree/bindings/clock/ti-clock-alias.txt | 26 ++++++++ arch/arm/mach-omap2/board-generic.c | 67 ++++++++++++++++++++ 2 files changed, 93 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ti-clock-alias.txt