diff mbox

[v4,3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT

Message ID 1362414054-23092-3-git-send-email-hechtb+renesas@gmail.com (mailing list archive)
State Superseded
Headers show

Commit Message

Bastian Hecht March 4, 2013, 4:20 p.m. UTC 
We can now use the Device Tree for bringing up our serial devices on
the SoC r8a7740.

We remove the power domain association. We will move the info into the
DT setup as soon as we have support for it. For now this is fine as we
use the power domain governor "pm_domain_always_on_gov" for A3SP.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
---
v4:
We don't move the DT into the r8a7740-armadillo800eva-reference.dts, but
r8a7740.dtsi as the serial device setups are not dependent on any board
confguration.

Renamed sci@0xe6c40000 to sci@e6c40000

 arch/arm/boot/dts/r8a7740.dtsi         |   99 ++++++++++++++++++
 arch/arm/mach-shmobile/setup-r8a7740.c |  180 --------------------------------
 2 files changed, 99 insertions(+), 180 deletions(-)

Comments

Arnd Bergmann March 4, 2013, 4:22 p.m. UTC | #1 
On Monday 04 March 2013 17:20:54 Bastian Hecht wrote:
> 
> +       sci@e6c40000 {
> +               compatible = "renesas,sci-SCIFA-uart";
> +               interrupt-parent = <&intca>;
> +               reg = <0xe6c40000 0x100>;
> +               interrupts = <0x0c00>, <0x0c00>, <0x0c00>, <0x0c00>;
> +               cell-index = <0>;
> +               renesas,scscr = <0x30>;
> +               renesas,scbrr-algo-id = <4>;
> +               renesas,autoconf;
> +       };

The default name for a uart is "serial", I would recommend sticking to
that by convention. You may also want to add an "aliases" node
somewhere, to define which port should get which logical device number
on a given board.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bastian Hecht March 5, 2013, 1 p.m. UTC | #2 
Hi Arnd,

2013/3/4 Arnd Bergmann <arnd@arndb.de>:
> On Monday 04 March 2013 17:20:54 Bastian Hecht wrote:
>>
>> +       sci@e6c40000 {
>> +               compatible = "renesas,sci-SCIFA-uart";
>> +               interrupt-parent = <&intca>;
>> +               reg = <0xe6c40000 0x100>;
>> +               interrupts = <0x0c00>, <0x0c00>, <0x0c00>, <0x0c00>;
>> +               cell-index = <0>;
>> +               renesas,scscr = <0x30>;
>> +               renesas,scbrr-algo-id = <4>;
>> +               renesas,autoconf;
>> +       };
>
> The default name for a uart is "serial", I would recommend sticking to
> that by convention. You may also want to add an "aliases" node
> somewhere, to define which port should get which logical device number
> on a given board.

Switched to "...-serial".
About the aliases: Would I need to add that now, or can we postpone that?

Thanks,

 Bastian


>         Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sergei Shtylyov March 5, 2013, 1:42 p.m. UTC | #3 
Hello.

On 05-03-2013 17:00, Bastian Hecht wrote:

>>> +       sci@e6c40000 {
>>> +               compatible = "renesas,sci-SCIFA-uart";
>>> +               interrupt-parent = <&intca>;
>>> +               reg = <0xe6c40000 0x100>;
>>> +               interrupts = <0x0c00>, <0x0c00>, <0x0c00>, <0x0c00>;
>>> +               cell-index = <0>;
>>> +               renesas,scscr = <0x30>;
>>> +               renesas,scbrr-algo-id = <4>;
>>> +               renesas,autoconf;
>>> +       };
>>
>> The default name for a uart is "serial", I would recommend sticking to
>> that by convention. You may also want to add an "aliases" node
>> somewhere, to define which port should get which logical device number
>> on a given board.

> Switched to "...-serial".

    I think he was talking about the node name, not "compatible" property.

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bastian Hecht March 5, 2013, 1:47 p.m. UTC | #4 
2013/3/5 Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>:
> Hello.
>
>
> On 05-03-2013 17:00, Bastian Hecht wrote:
>
>>>> +       sci@e6c40000 {
>>>> +               compatible = "renesas,sci-SCIFA-uart";
>>>> +               interrupt-parent = <&intca>;
>>>> +               reg = <0xe6c40000 0x100>;
>>>> +               interrupts = <0x0c00>, <0x0c00>, <0x0c00>, <0x0c00>;
>>>> +               cell-index = <0>;
>>>> +               renesas,scscr = <0x30>;
>>>> +               renesas,scbrr-algo-id = <4>;
>>>> +               renesas,autoconf;
>>>> +       };
>>>
>>>
>>> The default name for a uart is "serial", I would recommend sticking to
>>> that by convention. You may also want to add an "aliases" node
>>> somewhere, to define which port should get which logical device number
>>> on a given board.
>
>
>> Switched to "...-serial".
>
>
>    I think he was talking about the node name, not "compatible" property.

Ah sure! I'll wait for responses to v5 and will change it around in v6.

Thanks,

 Bastian


> WBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Arnd Bergmann March 5, 2013, 7:22 p.m. UTC | #5 
On Tuesday 05 March 2013, Bastian Hecht wrote:
> 2013/3/4 Arnd Bergmann <arnd@arndb.de>:
> > On Monday 04 March 2013 17:20:54 Bastian Hecht wrote:
> >>
> >> +       sci@e6c40000 {
> >> +               compatible = "renesas,sci-SCIFA-uart";
> >> +               interrupt-parent = <&intca>;
> >> +               reg = <0xe6c40000 0x100>;
> >> +               interrupts = <0x0c00>, <0x0c00>, <0x0c00>, <0x0c00>;
> >> +               cell-index = <0>;
> >> +               renesas,scscr = <0x30>;
> >> +               renesas,scbrr-algo-id = <4>;
> >> +               renesas,autoconf;
> >> +       };
> >
> > The default name for a uart is "serial", I would recommend sticking to
> > that by convention. You may also want to add an "aliases" node
> > somewhere, to define which port should get which logical device number
> > on a given board.
> 
> Switched to "...-serial".

I actually meant the name, not the "compatible" value. For compatible, either
version is fine with me. What I think you should change though is renaming
"sci@e6c40000" to "serial@e6c40000".

> About the aliases: Would I need to add that now, or can we postpone that?
> 

No hurry for that. It's just a feature that comes in very handy, but not
all platforms implement it.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 82faf52..ecbc237 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -767,4 +767,103 @@ 
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	sci@e6c40000 {
+		compatible = "renesas,sci-SCIFA-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6c40000 0x100>;
+		interrupts = <0x0c00>, <0x0c00>, <0x0c00>, <0x0c00>;
+		cell-index = <0>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
+
+	sci@e6c50000 {
+		compatible = "renesas,sci-SCIFA-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6c50000 0x100>;
+		interrupts = <0x0c20>, <0x0c20>, <0x0c20>, <0x0c20>;
+		cell-index = <1>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
+
+	sci@e6c60000 {
+		compatible = "renesas,sci-SCIFA-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6c60000 0x100>;
+		interrupts = <0x0c40>, <0x0c40>, <0x0c40>, <0x0c40>;
+		cell-index = <2>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
+
+	sci@e6c70000 {
+		compatible = "renesas,sci-SCIFA-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6c70000 0x100>;
+		interrupts = <0x0c60>, <0x0c60>, <0x0c60>, <0x0c60>;
+		cell-index = <3>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
+
+	sci@e6c80000 {
+		compatible = "renesas,sci-SCIFA-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6c80000 0x100>;
+		interrupts = <0x0d20>, <0x0d20>, <0x0d20>, <0x0d20>;
+		cell-index = <4>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
+
+	sci@e6cb0000 {
+		compatible = "renesas,sci-SCIFA-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6cb0000 0x100>;
+		interrupts = <0x0d40>, <0x0d40>, <0x0d40>, <0x0d40>;
+		cell-index = <5>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
+
+	sci@e6cc0000 {
+		compatible = "renesas,sci-SCIFA-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6cc0000 0x100>;
+		interrupts = <0x04c0>, <0x04c0>, <0x04c0>, <0x04c0>;
+		cell-index = <6>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
+
+	sci@0xe6cd0000 {
+		compatible = "renesas,sci-SCIFA-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6cd0000 0x100>;
+		interrupts = <0x04e0>, <0x04e0>, <0x04e0>, <0x04e0>;
+		cell-index = <7>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
+
+	sci@e6c30000 {
+		compatible = "renesas,sci-SCIFB-uart";
+		interrupt-parent = <&intca>;
+		reg = <0xe6c30000 0x100>;
+		interrupts = <0x0d60>, <0x0d60>, <0x0d60>, <0x0d60>;
+		cell-index = <8>;
+		renesas,scscr = <0x30>;
+		renesas,scbrr-algo-id = <4>;
+		renesas,autoconf;
+	};
 };
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index f35e7c2..5a563cd 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -93,168 +93,6 @@  void __init r8a7740_pinmux_init(void)
 	platform_device_register(&r8a7740_pfc_device);
 }
 
-/* SCIFA0 */
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c00)),
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-/* SCIFA1 */
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c20)),
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-/* SCIFA2 */
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c40)),
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-/* SCIFA3 */
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c60)),
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-/* SCIFA4 */
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d20)),
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-/* SCIFA5 */
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d40)),
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-/* SCIFA6 */
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6cc0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x04c0)),
-};
-
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
-
-/* SCIFA7 */
-static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xe6cd0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x04e0)),
-};
-
-static struct platform_device scif7_device = {
-	.name		= "sh-sci",
-	.id		= 7,
-	.dev		= {
-		.platform_data	= &scif7_platform_data,
-	},
-};
-
-/* SCIFB */
-static struct plat_sci_port scifb_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d60)),
-};
-
-static struct platform_device scifb_device = {
-	.name		= "sh-sci",
-	.id		= 8,
-	.dev		= {
-		.platform_data	= &scifb_platform_data,
-	},
-};
-
 /* CMT */
 static struct sh_timer_config cmt10_platform_data = {
 	.name = "CMT10",
@@ -379,15 +217,6 @@  static struct platform_device tmu02_device = {
 };
 
 static struct platform_device *r8a7740_devices_dt[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scifb_device,
 	&cmt10_device,
 	&tmu00_device,
 	&tmu01_device,
@@ -812,15 +641,6 @@  void __init r8a7740_add_standard_devices(void)
 
 	/* add devices to PM domain  */
 
-	rmobile_add_device_to_domain("A3SP",	&scif0_device);
-	rmobile_add_device_to_domain("A3SP",	&scif1_device);
-	rmobile_add_device_to_domain("A3SP",	&scif2_device);
-	rmobile_add_device_to_domain("A3SP",	&scif3_device);
-	rmobile_add_device_to_domain("A3SP",	&scif4_device);
-	rmobile_add_device_to_domain("A3SP",	&scif5_device);
-	rmobile_add_device_to_domain("A3SP",	&scif6_device);
-	rmobile_add_device_to_domain("A3SP",	&scif7_device);
-	rmobile_add_device_to_domain("A3SP",	&scifb_device);
 	rmobile_add_device_to_domain("A3SP",	&i2c1_device);
 }