| Message ID | 1362743515-10152-11-git-send-email-tomi.valkeinen@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Friday 08 March 2013 05:21 PM, Tomi Valkeinen wrote: > The DISPC channel used for each output is currently passed in panel > platform data from the board files. > > To simplify this, and to make the panel drivers less dependent on OMAP, > this patch changes omapdss to resolve the channel independently. The > channel is resolved based on the OMAP version and, in case of DSI, the > DSI module id. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > --- > drivers/video/omap2/dss/dpi.c | 37 ++++++++++++++++++++++++++----- > drivers/video/omap2/dss/dsi.c | 48 ++++++++++++++++++++++++++++++++++++++++ > drivers/video/omap2/dss/rfbi.c | 2 ++ > drivers/video/omap2/dss/sdi.c | 2 ++ > 4 files changed, 84 insertions(+), 5 deletions(-) > > diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c > index e282456..3261644 100644 > --- a/drivers/video/omap2/dss/dpi.c > +++ b/drivers/video/omap2/dss/dpi.c > @@ -396,12 +396,44 @@ static int __init dpi_verify_dsi_pll(struct platform_device *dsidev) > return 0; > } > > +/* > + * Return a hardcoded channel for the DPI output. This should work for > + * current use cases, but this can be later expanded to either resolve > + * the channel in some more dynamic manner, or get the channel as a user > + * parameter. > + */ > +static enum omap_channel dpi_get_channel(void) > +{ > + switch (omapdss_get_version()) { > + case OMAPDSS_VER_OMAP24xx: > + case OMAPDSS_VER_OMAP34xx_ES1: > + case OMAPDSS_VER_OMAP34xx_ES3: > + case OMAPDSS_VER_OMAP3630: > + case OMAPDSS_VER_AM35xx: > + return OMAP_DSS_CHANNEL_LCD; > + > + case OMAPDSS_VER_OMAP4430_ES1: > + case OMAPDSS_VER_OMAP4430_ES2: > + case OMAPDSS_VER_OMAP4: > + return OMAP_DSS_CHANNEL_LCD2; > + > + case OMAPDSS_VER_OMAP5: > + return OMAP_DSS_CHANNEL_LCD2; > + > + default: > + DSSWARN("unsupported DSS version\n"); > + return OMAP_DSS_CHANNEL_LCD; > + } > +} > + > static int __init dpi_init_display(struct omap_dss_device *dssdev) > { > struct platform_device *dsidev; > > DSSDBG("init_display\n"); > > + dssdev->channel = dpi_get_channel(); In patch 14 of the series, we remove these dssdev->channel assignments. I don't see the point of adding them in this patch in the first place. The dssdev->channel assignments will not be modified in this series, so we don't need to worry about a kernel crash or something after this patch. I feel this patch should only add the dpi_get_channel and dsi_get_channel funcs. > + > if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI) && > dpi.vdds_dsi_reg == NULL) { > struct regulator *vdds_dsi; > @@ -416,11 +448,6 @@ static int __init dpi_init_display(struct omap_dss_device *dssdev) > dpi.vdds_dsi_reg = vdds_dsi; > } > > - /* > - * XXX We shouldn't need dssdev->channel for this. The dsi pll clock > - * source for DPI is SoC integration detail, not something that should > - * be configured in the dssdev > - */ > dsidev = dpi_get_dsidev(dssdev->channel); > > if (dsidev && dpi_verify_dsi_pll(dsidev)) { > diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c > index 1a6ad6f..c39ca86 100644 > --- a/drivers/video/omap2/dss/dsi.c > +++ b/drivers/video/omap2/dss/dsi.c > @@ -4946,6 +4946,52 @@ void omapdss_dsi_set_videomode_timings(struct omap_dss_device *dssdev, > } > EXPORT_SYMBOL(omapdss_dsi_set_videomode_timings); > > +/* > + * Return a hardcoded channel for the DSI output. This should work for > + * current use cases, but this can be later expanded to either resolve > + * the channel in some more dynamic manner, or get the channel as a user > + * parameter. > + */ > +static enum omap_channel dsi_get_channel(int module_id) > +{ > + switch (omapdss_get_version()) { > + case OMAPDSS_VER_OMAP24xx: We should remove the above case so that we hit the default case and get a warning about omap2 not having DSI. > + case OMAPDSS_VER_OMAP34xx_ES1: > + case OMAPDSS_VER_OMAP34xx_ES3: > + case OMAPDSS_VER_OMAP3630: > + case OMAPDSS_VER_AM35xx: <snip> Archit -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 08 March 2013 05:21 PM, Tomi Valkeinen wrote: > The DISPC channel used for each output is currently passed in panel > platform data from the board files. > > To simplify this, and to make the panel drivers less dependent on OMAP, > this patch changes omapdss to resolve the channel independently. The > channel is resolved based on the OMAP version and, in case of DSI, the > DSI module id. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > --- > drivers/video/omap2/dss/dpi.c | 37 ++++++++++++++++++++++++++----- > drivers/video/omap2/dss/dsi.c | 48 ++++++++++++++++++++++++++++++++++++++++ > drivers/video/omap2/dss/rfbi.c | 2 ++ > drivers/video/omap2/dss/sdi.c | 2 ++ > 4 files changed, 84 insertions(+), 5 deletions(-) > > diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c > index e282456..3261644 100644 > --- a/drivers/video/omap2/dss/dpi.c > +++ b/drivers/video/omap2/dss/dpi.c > @@ -396,12 +396,44 @@ static int __init dpi_verify_dsi_pll(struct platform_device *dsidev) > return 0; > } > > +/* > + * Return a hardcoded channel for the DPI output. This should work for > + * current use cases, but this can be later expanded to either resolve > + * the channel in some more dynamic manner, or get the channel as a user > + * parameter. > + */ > +static enum omap_channel dpi_get_channel(void) > +{ > + switch (omapdss_get_version()) { > + case OMAPDSS_VER_OMAP24xx: > + case OMAPDSS_VER_OMAP34xx_ES1: > + case OMAPDSS_VER_OMAP34xx_ES3: > + case OMAPDSS_VER_OMAP3630: > + case OMAPDSS_VER_AM35xx: > + return OMAP_DSS_CHANNEL_LCD; > + > + case OMAPDSS_VER_OMAP4430_ES1: > + case OMAPDSS_VER_OMAP4430_ES2: > + case OMAPDSS_VER_OMAP4: > + return OMAP_DSS_CHANNEL_LCD2; > + > + case OMAPDSS_VER_OMAP5: > + return OMAP_DSS_CHANNEL_LCD2; > + > + default: > + DSSWARN("unsupported DSS version\n"); > + return OMAP_DSS_CHANNEL_LCD; > + } > +} I had another comment for this patch. On OMAP5, it makes sense for us to not use LCD2 as the recommended channel. LCD2_CLK's only source is DSS_CLK from PRCM. So it's not a very flexible channel to use. We could use LCD3 (at the cost of not using DSI2). We also need to fix dpi_get_dsidev() for OMAP5. Currently, it assumes that LCD2_CLK can be sourced from DSI2 PLL, we need to ensure DPI has a dsidev only if it's LCD1 or LCD3. Archit > + > static int __init dpi_init_display(struct omap_dss_device *dssdev) > { > struct platform_device *dsidev; > > DSSDBG("init_display\n"); > > + dssdev->channel = dpi_get_channel(); > + > if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI) && > dpi.vdds_dsi_reg == NULL) { > struct regulator *vdds_dsi; > @@ -416,11 +448,6 @@ static int __init dpi_init_display(struct omap_dss_device *dssdev) > dpi.vdds_dsi_reg = vdds_dsi; > } > > - /* > - * XXX We shouldn't need dssdev->channel for this. The dsi pll clock > - * source for DPI is SoC integration detail, not something that should > - * be configured in the dssdev > - */ > dsidev = dpi_get_dsidev(dssdev->channel); > > if (dsidev && dpi_verify_dsi_pll(dsidev)) { > diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c > index 1a6ad6f..c39ca86 100644 > --- a/drivers/video/omap2/dss/dsi.c > +++ b/drivers/video/omap2/dss/dsi.c > @@ -4946,6 +4946,52 @@ void omapdss_dsi_set_videomode_timings(struct omap_dss_device *dssdev, > } > EXPORT_SYMBOL(omapdss_dsi_set_videomode_timings); > > +/* > + * Return a hardcoded channel for the DSI output. This should work for > + * current use cases, but this can be later expanded to either resolve > + * the channel in some more dynamic manner, or get the channel as a user > + * parameter. > + */ > +static enum omap_channel dsi_get_channel(int module_id) > +{ > + switch (omapdss_get_version()) { > + case OMAPDSS_VER_OMAP24xx: > + case OMAPDSS_VER_OMAP34xx_ES1: > + case OMAPDSS_VER_OMAP34xx_ES3: > + case OMAPDSS_VER_OMAP3630: > + case OMAPDSS_VER_AM35xx: > + return OMAP_DSS_CHANNEL_LCD; > + > + case OMAPDSS_VER_OMAP4430_ES1: > + case OMAPDSS_VER_OMAP4430_ES2: > + case OMAPDSS_VER_OMAP4: > + switch (module_id) { > + case 0: > + return OMAP_DSS_CHANNEL_LCD; > + case 1: > + return OMAP_DSS_CHANNEL_LCD2; > + default: > + DSSWARN("unsupported module id\n"); > + return OMAP_DSS_CHANNEL_LCD; > + } > + > + case OMAPDSS_VER_OMAP5: > + switch (module_id) { > + case 0: > + return OMAP_DSS_CHANNEL_LCD; > + case 1: > + return OMAP_DSS_CHANNEL_LCD3; > + default: > + DSSWARN("unsupported module id\n"); > + return OMAP_DSS_CHANNEL_LCD; > + } > + > + default: > + DSSWARN("unsupported DSS version\n"); > + return OMAP_DSS_CHANNEL_LCD; > + } > +} > + > static int __init dsi_init_display(struct omap_dss_device *dssdev) > { > struct platform_device *dsidev = > @@ -4954,6 +5000,8 @@ static int __init dsi_init_display(struct omap_dss_device *dssdev) > > DSSDBG("DSI init\n"); > > + dssdev->channel = dsi_get_channel(dsi->module_id); > + > if (dsi->vdds_dsi_reg == NULL) { > struct regulator *vdds_dsi; > > diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c > index a47a9e5..04c4ab6 100644 > --- a/drivers/video/omap2/dss/rfbi.c > +++ b/drivers/video/omap2/dss/rfbi.c > @@ -945,6 +945,8 @@ EXPORT_SYMBOL(omapdss_rfbi_display_disable); > > static int __init rfbi_init_display(struct omap_dss_device *dssdev) > { > + dssdev->channel = OMAP_DSS_CHANNEL_LCD; > + > rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev; > return 0; > } > diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c > index 0802927..d24e971 100644 > --- a/drivers/video/omap2/dss/sdi.c > +++ b/drivers/video/omap2/dss/sdi.c > @@ -186,6 +186,8 @@ static int __init sdi_init_display(struct omap_dss_device *dssdev) > { > DSSDBG("SDI init\n"); > > + dssdev->channel = OMAP_DSS_CHANNEL_LCD; > + > if (sdi.vdds_sdi_reg == NULL) { > struct regulator *vdds_sdi; > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2013-03-11 07:35, Archit Taneja wrote: > Hi, > > On Friday 08 March 2013 05:21 PM, Tomi Valkeinen wrote: >> The DISPC channel used for each output is currently passed in panel >> platform data from the board files. >> >> To simplify this, and to make the panel drivers less dependent on OMAP, >> this patch changes omapdss to resolve the channel independently. The >> channel is resolved based on the OMAP version and, in case of DSI, the >> DSI module id. >> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> >> --- >> drivers/video/omap2/dss/dpi.c | 37 ++++++++++++++++++++++++++----- >> drivers/video/omap2/dss/dsi.c | 48 >> ++++++++++++++++++++++++++++++++++++++++ >> drivers/video/omap2/dss/rfbi.c | 2 ++ >> drivers/video/omap2/dss/sdi.c | 2 ++ >> 4 files changed, 84 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/video/omap2/dss/dpi.c >> b/drivers/video/omap2/dss/dpi.c >> index e282456..3261644 100644 >> --- a/drivers/video/omap2/dss/dpi.c >> +++ b/drivers/video/omap2/dss/dpi.c >> @@ -396,12 +396,44 @@ static int __init dpi_verify_dsi_pll(struct >> platform_device *dsidev) >> return 0; >> } >> >> +/* >> + * Return a hardcoded channel for the DPI output. This should work for >> + * current use cases, but this can be later expanded to either resolve >> + * the channel in some more dynamic manner, or get the channel as a user >> + * parameter. >> + */ >> +static enum omap_channel dpi_get_channel(void) >> +{ >> + switch (omapdss_get_version()) { >> + case OMAPDSS_VER_OMAP24xx: >> + case OMAPDSS_VER_OMAP34xx_ES1: >> + case OMAPDSS_VER_OMAP34xx_ES3: >> + case OMAPDSS_VER_OMAP3630: >> + case OMAPDSS_VER_AM35xx: >> + return OMAP_DSS_CHANNEL_LCD; >> + >> + case OMAPDSS_VER_OMAP4430_ES1: >> + case OMAPDSS_VER_OMAP4430_ES2: >> + case OMAPDSS_VER_OMAP4: >> + return OMAP_DSS_CHANNEL_LCD2; >> + >> + case OMAPDSS_VER_OMAP5: >> + return OMAP_DSS_CHANNEL_LCD2; >> + >> + default: >> + DSSWARN("unsupported DSS version\n"); >> + return OMAP_DSS_CHANNEL_LCD; >> + } >> +} >> + >> static int __init dpi_init_display(struct omap_dss_device *dssdev) >> { >> struct platform_device *dsidev; >> >> DSSDBG("init_display\n"); >> >> + dssdev->channel = dpi_get_channel(); > > In patch 14 of the series, we remove these dssdev->channel assignments. > I don't see the point of adding them in this patch in the first place. > The dssdev->channel assignments will not be modified in this series, so > we don't need to worry about a kernel crash or something after this patch. > > I feel this patch should only add the dpi_get_channel and > dsi_get_channel funcs. Yes, you're right. It's just extra going back and forth. I think I'll merge this with the patch adding recommended channel. >> + >> if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI) && >> dpi.vdds_dsi_reg == NULL) { >> struct regulator *vdds_dsi; >> @@ -416,11 +448,6 @@ static int __init dpi_init_display(struct >> omap_dss_device *dssdev) >> dpi.vdds_dsi_reg = vdds_dsi; >> } >> >> - /* >> - * XXX We shouldn't need dssdev->channel for this. The dsi pll clock >> - * source for DPI is SoC integration detail, not something that >> should >> - * be configured in the dssdev >> - */ >> dsidev = dpi_get_dsidev(dssdev->channel); >> >> if (dsidev && dpi_verify_dsi_pll(dsidev)) { >> diff --git a/drivers/video/omap2/dss/dsi.c >> b/drivers/video/omap2/dss/dsi.c >> index 1a6ad6f..c39ca86 100644 >> --- a/drivers/video/omap2/dss/dsi.c >> +++ b/drivers/video/omap2/dss/dsi.c >> @@ -4946,6 +4946,52 @@ void omapdss_dsi_set_videomode_timings(struct >> omap_dss_device *dssdev, >> } >> EXPORT_SYMBOL(omapdss_dsi_set_videomode_timings); >> >> +/* >> + * Return a hardcoded channel for the DSI output. This should work for >> + * current use cases, but this can be later expanded to either resolve >> + * the channel in some more dynamic manner, or get the channel as a user >> + * parameter. >> + */ >> +static enum omap_channel dsi_get_channel(int module_id) >> +{ >> + switch (omapdss_get_version()) { >> + case OMAPDSS_VER_OMAP24xx: > > We should remove the above case so that we hit the default case and get > a warning about omap2 not having DSI. Yep, I'll fix that. Tomi
On 2013-03-11 07:53, Archit Taneja wrote: > On Friday 08 March 2013 05:21 PM, Tomi Valkeinen wrote: >> The DISPC channel used for each output is currently passed in panel >> platform data from the board files. >> >> To simplify this, and to make the panel drivers less dependent on OMAP, >> this patch changes omapdss to resolve the channel independently. The >> channel is resolved based on the OMAP version and, in case of DSI, the >> DSI module id. >> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> >> --- >> drivers/video/omap2/dss/dpi.c | 37 ++++++++++++++++++++++++++----- >> drivers/video/omap2/dss/dsi.c | 48 >> ++++++++++++++++++++++++++++++++++++++++ >> drivers/video/omap2/dss/rfbi.c | 2 ++ >> drivers/video/omap2/dss/sdi.c | 2 ++ >> 4 files changed, 84 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/video/omap2/dss/dpi.c >> b/drivers/video/omap2/dss/dpi.c >> index e282456..3261644 100644 >> --- a/drivers/video/omap2/dss/dpi.c >> +++ b/drivers/video/omap2/dss/dpi.c >> @@ -396,12 +396,44 @@ static int __init dpi_verify_dsi_pll(struct >> platform_device *dsidev) >> return 0; >> } >> >> +/* >> + * Return a hardcoded channel for the DPI output. This should work for >> + * current use cases, but this can be later expanded to either resolve >> + * the channel in some more dynamic manner, or get the channel as a user >> + * parameter. >> + */ >> +static enum omap_channel dpi_get_channel(void) >> +{ >> + switch (omapdss_get_version()) { >> + case OMAPDSS_VER_OMAP24xx: >> + case OMAPDSS_VER_OMAP34xx_ES1: >> + case OMAPDSS_VER_OMAP34xx_ES3: >> + case OMAPDSS_VER_OMAP3630: >> + case OMAPDSS_VER_AM35xx: >> + return OMAP_DSS_CHANNEL_LCD; >> + >> + case OMAPDSS_VER_OMAP4430_ES1: >> + case OMAPDSS_VER_OMAP4430_ES2: >> + case OMAPDSS_VER_OMAP4: >> + return OMAP_DSS_CHANNEL_LCD2; >> + >> + case OMAPDSS_VER_OMAP5: >> + return OMAP_DSS_CHANNEL_LCD2; >> + >> + default: >> + DSSWARN("unsupported DSS version\n"); >> + return OMAP_DSS_CHANNEL_LCD; >> + } >> +} > > I had another comment for this patch. On OMAP5, it makes sense for us to > not use LCD2 as the recommended channel. LCD2_CLK's only source is > DSS_CLK from PRCM. So it's not a very flexible channel to use. We could > use LCD3 (at the cost of not using DSI2). Ok. Yes, this looks to be the case. I'll use LCD3 for DPI for now. In the worst case we may need to pass some channel setup parameters via omapdss DT data or platform data, but I'd really much like the driver to be able to resolve the dispc channels by itself... > We also need to fix dpi_get_dsidev() for OMAP5. Currently, it assumes > that LCD2_CLK can be sourced from DSI2 PLL, we need to ensure DPI has a > dsidev only if it's LCD1 or LCD3. Right. I'll add if (OMAP5) there, and return DSI2 PLL for LCD3, and NULL for LCD2. Tomi
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c index e282456..3261644 100644 --- a/drivers/video/omap2/dss/dpi.c +++ b/drivers/video/omap2/dss/dpi.c @@ -396,12 +396,44 @@ static int __init dpi_verify_dsi_pll(struct platform_device *dsidev) return 0; } +/* + * Return a hardcoded channel for the DPI output. This should work for + * current use cases, but this can be later expanded to either resolve + * the channel in some more dynamic manner, or get the channel as a user + * parameter. + */ +static enum omap_channel dpi_get_channel(void) +{ + switch (omapdss_get_version()) { + case OMAPDSS_VER_OMAP24xx: + case OMAPDSS_VER_OMAP34xx_ES1: + case OMAPDSS_VER_OMAP34xx_ES3: + case OMAPDSS_VER_OMAP3630: + case OMAPDSS_VER_AM35xx: + return OMAP_DSS_CHANNEL_LCD; + + case OMAPDSS_VER_OMAP4430_ES1: + case OMAPDSS_VER_OMAP4430_ES2: + case OMAPDSS_VER_OMAP4: + return OMAP_DSS_CHANNEL_LCD2; + + case OMAPDSS_VER_OMAP5: + return OMAP_DSS_CHANNEL_LCD2; + + default: + DSSWARN("unsupported DSS version\n"); + return OMAP_DSS_CHANNEL_LCD; + } +} + static int __init dpi_init_display(struct omap_dss_device *dssdev) { struct platform_device *dsidev; DSSDBG("init_display\n"); + dssdev->channel = dpi_get_channel(); + if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI) && dpi.vdds_dsi_reg == NULL) { struct regulator *vdds_dsi; @@ -416,11 +448,6 @@ static int __init dpi_init_display(struct omap_dss_device *dssdev) dpi.vdds_dsi_reg = vdds_dsi; } - /* - * XXX We shouldn't need dssdev->channel for this. The dsi pll clock - * source for DPI is SoC integration detail, not something that should - * be configured in the dssdev - */ dsidev = dpi_get_dsidev(dssdev->channel); if (dsidev && dpi_verify_dsi_pll(dsidev)) { diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 1a6ad6f..c39ca86 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -4946,6 +4946,52 @@ void omapdss_dsi_set_videomode_timings(struct omap_dss_device *dssdev, } EXPORT_SYMBOL(omapdss_dsi_set_videomode_timings); +/* + * Return a hardcoded channel for the DSI output. This should work for + * current use cases, but this can be later expanded to either resolve + * the channel in some more dynamic manner, or get the channel as a user + * parameter. + */ +static enum omap_channel dsi_get_channel(int module_id) +{ + switch (omapdss_get_version()) { + case OMAPDSS_VER_OMAP24xx: + case OMAPDSS_VER_OMAP34xx_ES1: + case OMAPDSS_VER_OMAP34xx_ES3: + case OMAPDSS_VER_OMAP3630: + case OMAPDSS_VER_AM35xx: + return OMAP_DSS_CHANNEL_LCD; + + case OMAPDSS_VER_OMAP4430_ES1: + case OMAPDSS_VER_OMAP4430_ES2: + case OMAPDSS_VER_OMAP4: + switch (module_id) { + case 0: + return OMAP_DSS_CHANNEL_LCD; + case 1: + return OMAP_DSS_CHANNEL_LCD2; + default: + DSSWARN("unsupported module id\n"); + return OMAP_DSS_CHANNEL_LCD; + } + + case OMAPDSS_VER_OMAP5: + switch (module_id) { + case 0: + return OMAP_DSS_CHANNEL_LCD; + case 1: + return OMAP_DSS_CHANNEL_LCD3; + default: + DSSWARN("unsupported module id\n"); + return OMAP_DSS_CHANNEL_LCD; + } + + default: + DSSWARN("unsupported DSS version\n"); + return OMAP_DSS_CHANNEL_LCD; + } +} + static int __init dsi_init_display(struct omap_dss_device *dssdev) { struct platform_device *dsidev = @@ -4954,6 +5000,8 @@ static int __init dsi_init_display(struct omap_dss_device *dssdev) DSSDBG("DSI init\n"); + dssdev->channel = dsi_get_channel(dsi->module_id); + if (dsi->vdds_dsi_reg == NULL) { struct regulator *vdds_dsi; diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index a47a9e5..04c4ab6 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -945,6 +945,8 @@ EXPORT_SYMBOL(omapdss_rfbi_display_disable); static int __init rfbi_init_display(struct omap_dss_device *dssdev) { + dssdev->channel = OMAP_DSS_CHANNEL_LCD; + rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev; return 0; } diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c index 0802927..d24e971 100644 --- a/drivers/video/omap2/dss/sdi.c +++ b/drivers/video/omap2/dss/sdi.c @@ -186,6 +186,8 @@ static int __init sdi_init_display(struct omap_dss_device *dssdev) { DSSDBG("SDI init\n"); + dssdev->channel = OMAP_DSS_CHANNEL_LCD; + if (sdi.vdds_sdi_reg == NULL) { struct regulator *vdds_sdi;
The DISPC channel used for each output is currently passed in panel platform data from the board files. To simplify this, and to make the panel drivers less dependent on OMAP, this patch changes omapdss to resolve the channel independently. The channel is resolved based on the OMAP version and, in case of DSI, the DSI module id. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- drivers/video/omap2/dss/dpi.c | 37 ++++++++++++++++++++++++++----- drivers/video/omap2/dss/dsi.c | 48 ++++++++++++++++++++++++++++++++++++++++ drivers/video/omap2/dss/rfbi.c | 2 ++ drivers/video/omap2/dss/sdi.c | 2 ++ 4 files changed, 84 insertions(+), 5 deletions(-)