| Message ID | 1363257158-11615-2-git-send-email-avinashphilip@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 3/14/2013 4:02 PM, Philip Avinash wrote: > Add EHRPWM and ECAP support build support for DAVINCI_DA850 platforms. > > Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, > remove the select option for CONFIG_PWM_TIPWMSS. > > Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in > pwm-tipwmss.h to fix the below compiler error upon removal of > CONFIG_PWM_TIPWMSS for Davinci platforms. > > drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': > drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared > (first use in this function) > drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier > is reported only once for each function it appears in > drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' > undeclared (first use in this function) > drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': > drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' > undeclared (first use in this function) > make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 > make[1]: *** [drivers/pwm] Error 2 > make: *** [drivers] Error 2 > > Signed-off-by: Philip Avinash <avinashphilip@ti.com> > config PWM_TIECAP > tristate "ECAP PWM support" > - depends on SOC_AM33XX > - select PWM_TIPWMSS > + depends on SOC_AM33XX || ARCH_DAVINCI_DA850 Having such narrow dependencies is wrong. The same device is present on DaVinci DA830 too. A depends on should not be required at all since the driver should build on all architectures. But I have seen resistance to doing that since users don't like to see configuration options totally irrelevant for the architecture they are building for. So may be take a middle path and do 'depends on ARCH_ARM'? Thanks, Sekhar
On Thu, Mar 14, 2013 at 17:09:04, Nori, Sekhar wrote: > On 3/14/2013 4:02 PM, Philip Avinash wrote: > > Add EHRPWM and ECAP support build support for DAVINCI_DA850 platforms. > > > > Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, > > remove the select option for CONFIG_PWM_TIPWMSS. > > > > Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in > > pwm-tipwmss.h to fix the below compiler error upon removal of > > CONFIG_PWM_TIPWMSS for Davinci platforms. > > > > drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': > > drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared > > (first use in this function) > > drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier > > is reported only once for each function it appears in > > drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' > > undeclared (first use in this function) > > drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': > > drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' > > undeclared (first use in this function) > > make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 > > make[1]: *** [drivers/pwm] Error 2 > > make: *** [drivers] Error 2 > > > > Signed-off-by: Philip Avinash <avinashphilip@ti.com> > > > config PWM_TIECAP > > tristate "ECAP PWM support" > > - depends on SOC_AM33XX > > - select PWM_TIPWMSS > > + depends on SOC_AM33XX || ARCH_DAVINCI_DA850 > > Having such narrow dependencies is wrong. The same device is present on > DaVinci DA830 too. A depends on should not be required at all since the > driver should build on all architectures. But I have seen resistance to > doing that since users don't like to see configuration options totally > irrelevant for the architecture they are building for. So may be take a > middle path and do 'depends on ARCH_ARM'? I will add dependency only on ARCH_ARM and submit another version. Thanks Avinash > > Thanks, > Sekhar >
On Thu, Mar 14, 2013 at 12:54:08PM +0000, Philip, Avinash wrote: > On Thu, Mar 14, 2013 at 17:09:04, Nori, Sekhar wrote: > > On 3/14/2013 4:02 PM, Philip Avinash wrote: > > > Add EHRPWM and ECAP support build support for DAVINCI_DA850 platforms. > > > > > > Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, > > > remove the select option for CONFIG_PWM_TIPWMSS. > > > > > > Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in > > > pwm-tipwmss.h to fix the below compiler error upon removal of > > > CONFIG_PWM_TIPWMSS for Davinci platforms. > > > > > > drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': > > > drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared > > > (first use in this function) > > > drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier > > > is reported only once for each function it appears in > > > drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' > > > undeclared (first use in this function) > > > drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': > > > drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' > > > undeclared (first use in this function) > > > make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 > > > make[1]: *** [drivers/pwm] Error 2 > > > make: *** [drivers] Error 2 > > > > > > Signed-off-by: Philip Avinash <avinashphilip@ti.com> > > > > > config PWM_TIECAP > > > tristate "ECAP PWM support" > > > - depends on SOC_AM33XX > > > - select PWM_TIPWMSS > > > + depends on SOC_AM33XX || ARCH_DAVINCI_DA850 > > > > Having such narrow dependencies is wrong. The same device is present on > > DaVinci DA830 too. A depends on should not be required at all since the > > driver should build on all architectures. But I have seen resistance to > > doing that since users don't like to see configuration options totally > > irrelevant for the architecture they are building for. So may be take a > > middle path and do 'depends on ARCH_ARM'? > > I will add dependency only on ARCH_ARM and submit another version. Perhaps SOC_AM33XX || ARCH_DAVINCI_DA8XX would be an alternative? Thierry
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 0e0bfa0..897b53c 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -147,8 +147,7 @@ config PWM_TEGRA config PWM_TIECAP tristate "ECAP PWM support" - depends on SOC_AM33XX - select PWM_TIPWMSS + depends on SOC_AM33XX || ARCH_DAVINCI_DA850 help PWM driver support for the ECAP APWM controller found on AM33XX TI SOC @@ -158,8 +157,7 @@ config PWM_TIECAP config PWM_TIEHRPWM tristate "EHRPWM PWM support" - depends on SOC_AM33XX - select PWM_TIPWMSS + depends on SOC_AM33XX || ARCH_DAVINCI_DA850 help PWM driver support for the EHRPWM controller found on AM33XX TI SOC @@ -169,7 +167,7 @@ config PWM_TIEHRPWM config PWM_TIPWMSS bool - depends on SOC_AM33XX && (PWM_TIEHRPWM || PWM_TIECAP) + default y if SOC_AM33XX && (PWM_TIECAP || PWM_TIEHRPWM) help PWM Subsystem driver support for AM33xx SOC. diff --git a/drivers/pwm/pwm-tipwmss.h b/drivers/pwm/pwm-tipwmss.h index 11f76a1..10ad804 100644 --- a/drivers/pwm/pwm-tipwmss.h +++ b/drivers/pwm/pwm-tipwmss.h @@ -18,7 +18,6 @@ #ifndef __TIPWMSS_H #define __TIPWMSS_H -#ifdef CONFIG_PWM_TIPWMSS /* PWM substem clock gating */ #define PWMSS_ECAPCLK_EN BIT(0) #define PWMSS_ECAPCLK_STOP_REQ BIT(1) @@ -28,6 +27,7 @@ #define PWMSS_ECAPCLK_EN_ACK BIT(0) #define PWMSS_EPWMCLK_EN_ACK BIT(8) +#ifdef CONFIG_PWM_TIPWMSS extern u16 pwmss_submodule_state_change(struct device *dev, int set); #else static inline u16 pwmss_submodule_state_change(struct device *dev, int set)
Add EHRPWM and ECAP support build support for DAVINCI_DA850 platforms. Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, remove the select option for CONFIG_PWM_TIPWMSS. Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in pwm-tipwmss.h to fix the below compiler error upon removal of CONFIG_PWM_TIPWMSS for Davinci platforms. drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier is reported only once for each function it appears in drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' undeclared (first use in this function) make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 make[1]: *** [drivers/pwm] Error 2 make: *** [drivers] Error 2 Signed-off-by: Philip Avinash <avinashphilip@ti.com> --- :100644 100644 0e0bfa0... 897b53c... M drivers/pwm/Kconfig :100644 100644 11f76a1... 10ad804... M drivers/pwm/pwm-tipwmss.h drivers/pwm/Kconfig | 8 +++----- drivers/pwm/pwm-tipwmss.h | 2 +- 2 files changed, 4 insertions(+), 6 deletions(-)