| Message ID | 1363294695-658-7-git-send-email-nm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/14/2013 03:58 PM, Nishanth Menon wrote: > OMAP4430 and 4460 have different OPP definitions. So, create an SoC > variant dtsi file for 4460 and move the OPP definitions to it. FYI, I had to create a similar file for PMU [1]. However, I called it omap4460.dtsi and not omap446x.dtsi as there is only one omap446x device. That should go into to v3.10 and so may be worth basing this on top. I do like your omap4-panda-common.dtsi that is a nice clean-up. Cheers Jon [1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/commit/?h=for_3.10/dts&id=5e64b6b1137a54f353528d6da60071c1ef0043ba -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 16:49-20130314, Jon Hunter wrote: > > On 03/14/2013 03:58 PM, Nishanth Menon wrote: > > OMAP4430 and 4460 have different OPP definitions. So, create an SoC > > variant dtsi file for 4460 and move the OPP definitions to it. > > FYI, I had to create a similar file for PMU [1]. However, I called it > omap4460.dtsi and not omap446x.dtsi as there is only one omap446x Hmm, guess I was paranoid about marketing folks spinning off another omap446x variant out into the market. Since it is not yet done, nor known if they will ever do it, am OK with 4460 convention. > device. That should go into to v3.10 and so may be worth basing this on > top. I do like your omap4-panda-common.dtsi that is a nice clean-up. Thanks on the tip - Sounds good, since this series is based on DT, I will base my changes on top of for_3.10 branch. > > Cheers > Jon > > [1] > http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/commit/?h=for_3.10/dts&id=5e64b6b1137a54f353528d6da60071c1ef0043ba
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 6422d7c..c52455b 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap4.dtsi" +/include/ "omap446x.dtsi" /include/ "omap4-panda-common.dtsi" /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ diff --git a/arch/arm/boot/dts/omap446x.dtsi b/arch/arm/boot/dts/omap446x.dtsi new file mode 100644 index 0000000..8f7a080 --- /dev/null +++ b/arch/arm/boot/dts/omap446x.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for OMAP446x SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap4.dtsi" + +/ { + cpus { + /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */ + cpu@0 { + operating-points = < + /* kHz uV */ + 350000 975000 + 700000 1075000 + 920000 1200000 + >; + clock-latency = <300000>; /* From omap-cpufreq driver */ + voltage-tolerance = <2>; /* 2 % */ + }; + }; +}; diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 478e2ee..4c5c038 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -116,21 +116,6 @@ struct omap_volt_data omap446x_vdd_core_volt_data[] = { }; static struct omap_opp_def __initdata omap446x_opp_def_list[] = { - /* MPU OPP1 - OPP50 */ - OPP_INITIALIZER("mpu", true, 350000000, OMAP4460_VDD_MPU_OPP50_UV), - /* MPU OPP2 - OPP100 */ - OPP_INITIALIZER("mpu", true, 700000000, OMAP4460_VDD_MPU_OPP100_UV), - /* MPU OPP3 - OPP-Turbo */ - OPP_INITIALIZER("mpu", true, 920000000, OMAP4460_VDD_MPU_OPPTURBO_UV), - /* - * MPU OPP4 - OPP-Nitro + Disabled as the reference schematics - * recommends TPS623631 - confirm and enable the opp in board file - * XXX: May be we should enable these based on mpu capability and - * Exception board files disable it... - */ - OPP_INITIALIZER("mpu", false, 1200000000, OMAP4460_VDD_MPU_OPPNITRO_UV), - /* MPU OPP4 - OPP-Nitro SpeedBin */ - OPP_INITIALIZER("mpu", false, 1500000000, OMAP4460_VDD_MPU_OPPNITRO_UV), /* L3 OPP1 - OPP50 */ OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4460_VDD_CORE_OPP50_UV), /* L3 OPP2 - OPP100 */
OMAP4430 and 4460 have different OPP definitions. So, create an SoC variant dtsi file for 4460 and move the OPP definitions to it. Add DT OPP table for OMAP446x family of devices. This data is decoded by OF with of_init_opp_table() helper function. This is in preparation to use generic cpu0-cpufreq driver. Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm/boot/dts/omap4-panda-es.dts | 2 +- arch/arm/boot/dts/omap446x.dtsi | 27 +++++++++++++++++++++++++++ arch/arm/mach-omap2/opp4xxx_data.c | 15 --------------- 3 files changed, 28 insertions(+), 16 deletions(-) create mode 100644 arch/arm/boot/dts/omap446x.dtsi