| Message ID | 1363939388-22412-2-git-send-email-prabhakar.csengg@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Prabhakar, On 3/22/2013 1:33 PM, Prabhakar lad wrote: > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > > Create platform devices for various video modules like venc,osd, > vpbe and v4l2 driver for dm365. > > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> > --- > arch/arm/mach-davinci/board-dm365-evm.c | 4 +- > arch/arm/mach-davinci/davinci.h | 2 +- > arch/arm/mach-davinci/dm365.c | 194 +++++++++++++++++++++++++++++-- > 3 files changed, 188 insertions(+), 12 deletions(-) > > diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c > index c2d4958..cf77c46 100644 > --- a/arch/arm/mach-davinci/board-dm365-evm.c > +++ b/arch/arm/mach-davinci/board-dm365-evm.c > @@ -564,8 +564,6 @@ static struct davinci_uart_config uart_config __initdata = { > > static void __init dm365_evm_map_io(void) > { > - /* setup input configuration for VPFE input devices */ > - dm365_set_vpfe_config(&vpfe_cfg); > dm365_init(); > } > > @@ -597,6 +595,8 @@ static __init void dm365_evm_init(void) > > davinci_setup_mmc(0, &dm365evm_mmc_config); > > + dm365_init_video(&vpfe_cfg, NULL); > + > /* maybe setup mmc1/etc ... _after_ mmc0 */ > evm_init_cpld(); > > diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h > index 12d544b..1c2670f 100644 > --- a/arch/arm/mach-davinci/davinci.h > +++ b/arch/arm/mach-davinci/davinci.h > @@ -84,7 +84,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); > void __init dm365_init_rtc(void); > void dm365_init_spi0(unsigned chipselect_mask, > const struct spi_board_info *info, unsigned len); > -void dm365_set_vpfe_config(struct vpfe_config *cfg); > +int __init dm365_init_video(struct vpfe_config *, struct vpbe_config *); No need of __init specifier in function declaration. > > /* DM644x function declarations */ > void __init dm644x_init(void); > diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c > index f4c19f7..0a2dba2 100644 > --- a/arch/arm/mach-davinci/dm365.c > +++ b/arch/arm/mach-davinci/dm365.c > @@ -40,10 +40,16 @@ > > #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ > > +#define DM365_VDAC_CONFIG 0x01c4002c Please define this in davinci.h as an offset from DAVINCI_SYSTEM_MODULE_BASE. > + > +#define DM365_RTC_BASE 0x01c69000 > + > /* Base of key scan register bank */ > #define DM365_KEYSCAN_BASE 0x01c69400 > > -#define DM365_RTC_BASE 0x01c69000 > +#define DM365_OSD_BASE 0x01c71c00 > + > +#define DM365_VENC_BASE 0x01c71e00 > > #define DAVINCI_DM365_VC_BASE 0x01d0c000 > #define DAVINCI_DMA_VC_TX 2 > @@ -56,6 +62,11 @@ > #define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000 > #define DM365_EMAC_CNTRL_RAM_SIZE 0x2000 > > +#define DM365_VPSS_CLK_CTRL_ADDR 0x44 This is already defined in davinci.h as SYSMOD_VPSS_CLKCTL. Please use the existing definition. > +#define DM365_VPSS_VENCCLKEN_ENABLE BIT(3) > +#define DM365_VPSS_DACCLKEN_ENABLE BIT(4) > +#define DM365_VPSS_PLLC2SYSCLK5_ENABLE BIT(5) Please move these related defintions to davinci.h as well. > + > static struct pll_data pll1_data = { > .num = 1, > .phys_base = DAVINCI_PLL1_BASE, > @@ -1233,6 +1244,179 @@ static struct platform_device dm365_isif_dev = { > }, > }; > > +static struct resource dm365_osd_resources[] = { > + { > + .start = DM365_OSD_BASE, > + .end = DM365_OSD_BASE + 0x100, You ignored by earlier comment to fix this to 0xFF and other such occurrences in this patch. Thanks, Sekhar
Hi Sekhar, Thanks for the review! On Mon, Mar 25, 2013 at 11:42 AM, Sekhar Nori <nsekhar@ti.com> wrote: > Prabhakar, > > On 3/22/2013 1:33 PM, Prabhakar lad wrote: >> From: Lad, Prabhakar <prabhakar.csengg@gmail.com> >> >> Create platform devices for various video modules like venc,osd, >> vpbe and v4l2 driver for dm365. >> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> >> --- >> arch/arm/mach-davinci/board-dm365-evm.c | 4 +- >> arch/arm/mach-davinci/davinci.h | 2 +- >> arch/arm/mach-davinci/dm365.c | 194 +++++++++++++++++++++++++++++-- >> 3 files changed, 188 insertions(+), 12 deletions(-) >> >> diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c >> index c2d4958..cf77c46 100644 >> --- a/arch/arm/mach-davinci/board-dm365-evm.c >> +++ b/arch/arm/mach-davinci/board-dm365-evm.c >> @@ -564,8 +564,6 @@ static struct davinci_uart_config uart_config __initdata = { >> >> static void __init dm365_evm_map_io(void) >> { >> - /* setup input configuration for VPFE input devices */ >> - dm365_set_vpfe_config(&vpfe_cfg); >> dm365_init(); >> } >> >> @@ -597,6 +595,8 @@ static __init void dm365_evm_init(void) >> >> davinci_setup_mmc(0, &dm365evm_mmc_config); >> >> + dm365_init_video(&vpfe_cfg, NULL); >> + >> /* maybe setup mmc1/etc ... _after_ mmc0 */ >> evm_init_cpld(); >> >> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h >> index 12d544b..1c2670f 100644 >> --- a/arch/arm/mach-davinci/davinci.h >> +++ b/arch/arm/mach-davinci/davinci.h >> @@ -84,7 +84,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); >> void __init dm365_init_rtc(void); >> void dm365_init_spi0(unsigned chipselect_mask, >> const struct spi_board_info *info, unsigned len); >> -void dm365_set_vpfe_config(struct vpfe_config *cfg); >> +int __init dm365_init_video(struct vpfe_config *, struct vpbe_config *); > > No need of __init specifier in function declaration. > OK >> >> /* DM644x function declarations */ >> void __init dm644x_init(void); >> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c >> index f4c19f7..0a2dba2 100644 >> --- a/arch/arm/mach-davinci/dm365.c >> +++ b/arch/arm/mach-davinci/dm365.c >> @@ -40,10 +40,16 @@ >> >> #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ >> >> +#define DM365_VDAC_CONFIG 0x01c4002c > > Please define this in davinci.h as an offset from > DAVINCI_SYSTEM_MODULE_BASE. > OK >> + >> +#define DM365_RTC_BASE 0x01c69000 >> + >> /* Base of key scan register bank */ >> #define DM365_KEYSCAN_BASE 0x01c69400 >> >> -#define DM365_RTC_BASE 0x01c69000 >> +#define DM365_OSD_BASE 0x01c71c00 >> + >> +#define DM365_VENC_BASE 0x01c71e00 >> Are you OK with this definitions or you want all of them in davinci.h ? >> #define DAVINCI_DM365_VC_BASE 0x01d0c000 >> #define DAVINCI_DMA_VC_TX 2 >> @@ -56,6 +62,11 @@ >> #define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000 >> #define DM365_EMAC_CNTRL_RAM_SIZE 0x2000 >> >> +#define DM365_VPSS_CLK_CTRL_ADDR 0x44 > > This is already defined in davinci.h as SYSMOD_VPSS_CLKCTL. Please use > the existing definition. > OK >> +#define DM365_VPSS_VENCCLKEN_ENABLE BIT(3) >> +#define DM365_VPSS_DACCLKEN_ENABLE BIT(4) >> +#define DM365_VPSS_PLLC2SYSCLK5_ENABLE BIT(5) > > Please move these related defintions to davinci.h as well. > OK >> + >> static struct pll_data pll1_data = { >> .num = 1, >> .phys_base = DAVINCI_PLL1_BASE, >> @@ -1233,6 +1244,179 @@ static struct platform_device dm365_isif_dev = { >> }, >> }; >> >> +static struct resource dm365_osd_resources[] = { >> + { >> + .start = DM365_OSD_BASE, >> + .end = DM365_OSD_BASE + 0x100, > > You ignored by earlier comment to fix this to 0xFF and other such > occurrences in this patch. > Ah missed it, will fix it in next version. Regards, --Prabhakar > Thanks, > Sekhar
On 3/25/2013 3:52 PM, Prabhakar Lad wrote: > Hi Sekhar, > > Thanks for the review! > > On Mon, Mar 25, 2013 at 11:42 AM, Sekhar Nori <nsekhar@ti.com> wrote: >> Prabhakar, >> >> On 3/22/2013 1:33 PM, Prabhakar lad wrote: >>> From: Lad, Prabhakar <prabhakar.csengg@gmail.com> >>> >>> Create platform devices for various video modules like venc,osd, >>> vpbe and v4l2 driver for dm365. >>> >>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> >>> --- >>> arch/arm/mach-davinci/board-dm365-evm.c | 4 +- >>> arch/arm/mach-davinci/davinci.h | 2 +- >>> arch/arm/mach-davinci/dm365.c | 194 +++++++++++++++++++++++++++++-- >>> 3 files changed, 188 insertions(+), 12 deletions(-) >>> >>> diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c >>> index c2d4958..cf77c46 100644 >>> --- a/arch/arm/mach-davinci/board-dm365-evm.c >>> +++ b/arch/arm/mach-davinci/board-dm365-evm.c >>> @@ -564,8 +564,6 @@ static struct davinci_uart_config uart_config __initdata = { >>> >>> static void __init dm365_evm_map_io(void) >>> { >>> - /* setup input configuration for VPFE input devices */ >>> - dm365_set_vpfe_config(&vpfe_cfg); >>> dm365_init(); >>> } >>> >>> @@ -597,6 +595,8 @@ static __init void dm365_evm_init(void) >>> >>> davinci_setup_mmc(0, &dm365evm_mmc_config); >>> >>> + dm365_init_video(&vpfe_cfg, NULL); >>> + >>> /* maybe setup mmc1/etc ... _after_ mmc0 */ >>> evm_init_cpld(); >>> >>> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h >>> index 12d544b..1c2670f 100644 >>> --- a/arch/arm/mach-davinci/davinci.h >>> +++ b/arch/arm/mach-davinci/davinci.h >>> @@ -84,7 +84,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); >>> void __init dm365_init_rtc(void); >>> void dm365_init_spi0(unsigned chipselect_mask, >>> const struct spi_board_info *info, unsigned len); >>> -void dm365_set_vpfe_config(struct vpfe_config *cfg); >>> +int __init dm365_init_video(struct vpfe_config *, struct vpbe_config *); >> >> No need of __init specifier in function declaration. >> > OK > >>> >>> /* DM644x function declarations */ >>> void __init dm644x_init(void); >>> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c >>> index f4c19f7..0a2dba2 100644 >>> --- a/arch/arm/mach-davinci/dm365.c >>> +++ b/arch/arm/mach-davinci/dm365.c >>> @@ -40,10 +40,16 @@ >>> >>> #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ >>> >>> +#define DM365_VDAC_CONFIG 0x01c4002c >> >> Please define this in davinci.h as an offset from >> DAVINCI_SYSTEM_MODULE_BASE. >> > OK > >>> + >>> +#define DM365_RTC_BASE 0x01c69000 >>> + >>> /* Base of key scan register bank */ >>> #define DM365_KEYSCAN_BASE 0x01c69400 >>> >>> -#define DM365_RTC_BASE 0x01c69000 >>> +#define DM365_OSD_BASE 0x01c71c00 >>> + >>> +#define DM365_VENC_BASE 0x01c71e00 >>> > Are you OK with this definitions or you want all of them in davinci.h ? No please leave these here. The reason I asked you to use davinci.h for SYSMOD is because I don't want those definitions to be strewn all over the place - especially when there is already a consolidated place for them. Thanks, Sekhar
Hi Sekhar, On Mon, Mar 25, 2013 at 3:57 PM, Sekhar Nori <nsekhar@ti.com> wrote: > On 3/25/2013 3:52 PM, Prabhakar Lad wrote: >> Hi Sekhar, >> >> Thanks for the review! >> >> On Mon, Mar 25, 2013 at 11:42 AM, Sekhar Nori <nsekhar@ti.com> wrote: >>> Prabhakar, >>> >>> On 3/22/2013 1:33 PM, Prabhakar lad wrote: >>>> From: Lad, Prabhakar <prabhakar.csengg@gmail.com> >>>> >>>> Create platform devices for various video modules like venc,osd, >>>> vpbe and v4l2 driver for dm365. >>>> >>>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> >>>> --- >>>> arch/arm/mach-davinci/board-dm365-evm.c | 4 +- >>>> arch/arm/mach-davinci/davinci.h | 2 +- >>>> arch/arm/mach-davinci/dm365.c | 194 +++++++++++++++++++++++++++++-- >>>> 3 files changed, 188 insertions(+), 12 deletions(-) >>>> >>>> diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c >>>> index c2d4958..cf77c46 100644 >>>> --- a/arch/arm/mach-davinci/board-dm365-evm.c >>>> +++ b/arch/arm/mach-davinci/board-dm365-evm.c >>>> @@ -564,8 +564,6 @@ static struct davinci_uart_config uart_config __initdata = { >>>> >>>> static void __init dm365_evm_map_io(void) >>>> { >>>> - /* setup input configuration for VPFE input devices */ >>>> - dm365_set_vpfe_config(&vpfe_cfg); >>>> dm365_init(); >>>> } >>>> >>>> @@ -597,6 +595,8 @@ static __init void dm365_evm_init(void) >>>> >>>> davinci_setup_mmc(0, &dm365evm_mmc_config); >>>> >>>> + dm365_init_video(&vpfe_cfg, NULL); >>>> + >>>> /* maybe setup mmc1/etc ... _after_ mmc0 */ >>>> evm_init_cpld(); >>>> >>>> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h >>>> index 12d544b..1c2670f 100644 >>>> --- a/arch/arm/mach-davinci/davinci.h >>>> +++ b/arch/arm/mach-davinci/davinci.h >>>> @@ -84,7 +84,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); >>>> void __init dm365_init_rtc(void); >>>> void dm365_init_spi0(unsigned chipselect_mask, >>>> const struct spi_board_info *info, unsigned len); >>>> -void dm365_set_vpfe_config(struct vpfe_config *cfg); >>>> +int __init dm365_init_video(struct vpfe_config *, struct vpbe_config *); >>> >>> No need of __init specifier in function declaration. >>> >> OK >> >>>> >>>> /* DM644x function declarations */ >>>> void __init dm644x_init(void); >>>> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c >>>> index f4c19f7..0a2dba2 100644 >>>> --- a/arch/arm/mach-davinci/dm365.c >>>> +++ b/arch/arm/mach-davinci/dm365.c >>>> @@ -40,10 +40,16 @@ >>>> >>>> #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ >>>> >>>> +#define DM365_VDAC_CONFIG 0x01c4002c >>> >>> Please define this in davinci.h as an offset from >>> DAVINCI_SYSTEM_MODULE_BASE. >>> >> OK >> >>>> + >>>> +#define DM365_RTC_BASE 0x01c69000 >>>> + >>>> /* Base of key scan register bank */ >>>> #define DM365_KEYSCAN_BASE 0x01c69400 >>>> >>>> -#define DM365_RTC_BASE 0x01c69000 >>>> +#define DM365_OSD_BASE 0x01c71c00 >>>> + >>>> +#define DM365_VENC_BASE 0x01c71e00 >>>> >> Are you OK with this definitions or you want all of them in davinci.h ? > > No please leave these here. The reason I asked you to use davinci.h for > SYSMOD is because I don't want those definitions to be strewn all over > the place - especially when there is already a consolidated place for them. > OK, that clears my doubt! Regards, --Prabhakar > Thanks, > Sekhar
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index c2d4958..cf77c46 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -564,8 +564,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm365_evm_map_io(void) { - /* setup input configuration for VPFE input devices */ - dm365_set_vpfe_config(&vpfe_cfg); dm365_init(); } @@ -597,6 +595,8 @@ static __init void dm365_evm_init(void) davinci_setup_mmc(0, &dm365evm_mmc_config); + dm365_init_video(&vpfe_cfg, NULL); + /* maybe setup mmc1/etc ... _after_ mmc0 */ evm_init_cpld(); diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 12d544b..1c2670f 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -84,7 +84,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); void __init dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); -void dm365_set_vpfe_config(struct vpfe_config *cfg); +int __init dm365_init_video(struct vpfe_config *, struct vpbe_config *); /* DM644x function declarations */ void __init dm644x_init(void); diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index f4c19f7..0a2dba2 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -40,10 +40,16 @@ #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ +#define DM365_VDAC_CONFIG 0x01c4002c + +#define DM365_RTC_BASE 0x01c69000 + /* Base of key scan register bank */ #define DM365_KEYSCAN_BASE 0x01c69400 -#define DM365_RTC_BASE 0x01c69000 +#define DM365_OSD_BASE 0x01c71c00 + +#define DM365_VENC_BASE 0x01c71e00 #define DAVINCI_DM365_VC_BASE 0x01d0c000 #define DAVINCI_DMA_VC_TX 2 @@ -56,6 +62,11 @@ #define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000 #define DM365_EMAC_CNTRL_RAM_SIZE 0x2000 +#define DM365_VPSS_CLK_CTRL_ADDR 0x44 +#define DM365_VPSS_VENCCLKEN_ENABLE BIT(3) +#define DM365_VPSS_DACCLKEN_ENABLE BIT(4) +#define DM365_VPSS_PLLC2SYSCLK5_ENABLE BIT(5) + static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -1233,6 +1244,179 @@ static struct platform_device dm365_isif_dev = { }, }; +static struct resource dm365_osd_resources[] = { + { + .start = DM365_OSD_BASE, + .end = DM365_OSD_BASE + 0x100, + .flags = IORESOURCE_MEM, + }, +}; + +static u64 dm365_video_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device dm365_osd_dev = { + .name = DM365_VPBE_OSD_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm365_osd_resources), + .resource = dm365_osd_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource dm365_venc_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM365_VENC_BASE, + .end = DM365_VENC_BASE + 0x180, + .flags = IORESOURCE_MEM, + }, + /* vdaccfg registers io space */ + { + .start = DM365_VDAC_CONFIG, + .end = DM365_VDAC_CONFIG + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource dm365_v4l2_disp_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM365_VENC_BASE, + .end = DM365_VENC_BASE + 0x180, + .flags = IORESOURCE_MEM, + }, +}; + +static int dm365_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type, + int field) +{ + switch (if_type) { + case V4L2_MBUS_FMT_SGRBG8_1X8: + davinci_cfg_reg(DM365_VOUT_FIELD_G81); + davinci_cfg_reg(DM365_VOUT_COUTL_EN); + davinci_cfg_reg(DM365_VOUT_COUTH_EN); + break; + + case V4L2_MBUS_FMT_YUYV10_1X20: + if (field) + davinci_cfg_reg(DM365_VOUT_FIELD); + else + davinci_cfg_reg(DM365_VOUT_FIELD_G81); + davinci_cfg_reg(DM365_VOUT_COUTL_EN); + davinci_cfg_reg(DM365_VOUT_COUTH_EN); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type, + unsigned int pclock) +{ + void __iomem *vpss_clkctl_reg; + u32 val; + + vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(DM365_VPSS_CLK_CTRL_ADDR); + + switch (type) { + case VPBE_ENC_STD: + val = DM365_VPSS_VENCCLKEN_ENABLE | DM365_VPSS_DACCLKEN_ENABLE; + break; + + case VPBE_ENC_DV_TIMINGS: + if (pclock <= 27000000) { + val = DM365_VPSS_VENCCLKEN_ENABLE | + DM365_VPSS_DACCLKEN_ENABLE; + } else { + /* set sysclk4 to output 74.25 MHz from pll1 */ + val = DM365_VPSS_PLLC2SYSCLK5_ENABLE | + DM365_VPSS_DACCLKEN_ENABLE | + DM365_VPSS_VENCCLKEN_ENABLE; + } + break; + + default: + return -EINVAL; + } + writel(val, vpss_clkctl_reg); + + return 0; +} + +static struct platform_device dm365_vpbe_display = { + .name = "vpbe-v4l2", + .id = -1, + .num_resources = ARRAY_SIZE(dm365_v4l2_disp_resources), + .resource = dm365_v4l2_disp_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct venc_platform_data dm365_venc_pdata = { + .setup_pinmux = dm365_vpbe_setup_pinmux, + .setup_clock = dm365_venc_setup_clock, +}; + +static struct platform_device dm365_venc_dev = { + .name = DM365_VPBE_VENC_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm365_venc_resources), + .resource = dm365_venc_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = (void *)&dm365_venc_pdata, + }, +}; + +static struct platform_device dm365_vpbe_dev = { + .name = "vpbe_controller", + .id = -1, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +int __init dm365_init_video(struct vpfe_config *vpfe_cfg, + struct vpbe_config *vpbe_cfg) +{ + if (vpfe_cfg || vpbe_cfg) + platform_device_register(&dm365_vpss_device); + + if (vpfe_cfg) { + vpfe_capture_dev.dev.platform_data = vpfe_cfg; + platform_device_register(&dm365_isif_dev); + platform_device_register(&vpfe_capture_dev); + } + if (vpbe_cfg) { + dm365_vpbe_dev.dev.platform_data = vpbe_cfg; + platform_device_register(&dm365_osd_dev); + platform_device_register(&dm365_venc_dev); + platform_device_register(&dm365_vpbe_dev); + platform_device_register(&dm365_vpbe_display); + } + + return 0; +} + static int __init dm365_init_devices(void) { if (!cpu_is_davinci_dm365()) @@ -1246,14 +1430,6 @@ static int __init dm365_init_devices(void) clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev), NULL, &dm365_emac_device.dev); - platform_device_register(&dm365_vpss_device); - platform_device_register(&dm365_isif_dev); - platform_device_register(&vpfe_capture_dev); return 0; } postcore_initcall(dm365_init_devices); - -void dm365_set_vpfe_config(struct vpfe_config *cfg) -{ - vpfe_capture_dev.dev.platform_data = cfg; -}