Message ID | 1364296699-20919-1-git-send-email-hechtb+renesas@gmail.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Tue, Mar 26, 2013 at 12:18:18PM +0100, Bastian Hecht wrote: > On some hardware we don't have a 1-1 mapping from the external > interrupts coming from INTC to the GIC SPI pins. We can however > share lines to demux incoming IRQs on these SoCs. > > This patch enables the intc_irqpin driver to detect requests for shared > interrupt lines and demuxes them properly by querying the INTC INTREQx0A > registers. > > If you need multiple shared intc_irqpin device instances, be sure to mask > out all interrupts on the INTC that share the one line before you start > to register them. Else you run into IRQ floods that would be caused by > interrupts for which no handler has been set up yet when the first > intc_irqpin device is registered. > > Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> > Acked-by: Magnus Damm <damm@opensource.se> Thanks, I will see about queuing up these changes for v3.10. I believe that with these changes it should be possible to rebase/rework armadillo800eva-reference so that it no longer uses the unmerged INTC DT bindings. Would it be possible for you to see about making a fresh version of armadillo800eva-reference that is based on the next branch in the Renesas tree plus this series of two patches? -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Simon, 2013/3/27 Simon Horman <horms@verge.net.au>: > On Tue, Mar 26, 2013 at 12:18:18PM +0100, Bastian Hecht wrote: >> On some hardware we don't have a 1-1 mapping from the external >> interrupts coming from INTC to the GIC SPI pins. We can however >> share lines to demux incoming IRQs on these SoCs. >> >> This patch enables the intc_irqpin driver to detect requests for shared >> interrupt lines and demuxes them properly by querying the INTC INTREQx0A >> registers. >> >> If you need multiple shared intc_irqpin device instances, be sure to mask >> out all interrupts on the INTC that share the one line before you start >> to register them. Else you run into IRQ floods that would be caused by >> interrupts for which no handler has been set up yet when the first >> intc_irqpin device is registered. >> >> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> >> Acked-by: Magnus Damm <damm@opensource.se> > > Thanks, I will see about queuing up these changes for v3.10. > > > I believe that with these changes it should be possible to rebase/rework > armadillo800eva-reference so that it no longer uses the unmerged INTC > DT bindings. Would it be possible for you to see about making a fresh > version of armadillo800eva-reference that is based on the next branch > in the Renesas tree plus this series of two patches? yes ok, I'll prepare a new armadillo reference version. The patches were based on all+next, but I'll post a v4 rebased on next. I'll post a separate patch series for the reference code if you don't mind, as this might take a few days to be done. Thanks, Bastian -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 27, 2013 at 02:50:05PM +0100, Bastian Hecht wrote: > Hi Simon, > > 2013/3/27 Simon Horman <horms@verge.net.au>: > > On Tue, Mar 26, 2013 at 12:18:18PM +0100, Bastian Hecht wrote: > >> On some hardware we don't have a 1-1 mapping from the external > >> interrupts coming from INTC to the GIC SPI pins. We can however > >> share lines to demux incoming IRQs on these SoCs. > >> > >> This patch enables the intc_irqpin driver to detect requests for shared > >> interrupt lines and demuxes them properly by querying the INTC INTREQx0A > >> registers. > >> > >> If you need multiple shared intc_irqpin device instances, be sure to mask > >> out all interrupts on the INTC that share the one line before you start > >> to register them. Else you run into IRQ floods that would be caused by > >> interrupts for which no handler has been set up yet when the first > >> intc_irqpin device is registered. > >> > >> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> > >> Acked-by: Magnus Damm <damm@opensource.se> > > > > Thanks, I will see about queuing up these changes for v3.10. > > > > > > I believe that with these changes it should be possible to rebase/rework > > armadillo800eva-reference so that it no longer uses the unmerged INTC > > DT bindings. Would it be possible for you to see about making a fresh > > version of armadillo800eva-reference that is based on the next branch > > in the Renesas tree plus this series of two patches? > > yes ok, I'll prepare a new armadillo reference version. The patches > were based on all+next, but I'll post a v4 rebased on next. Thanks, sorry for the bother. I have just pushed a fresh next branch and taged it as renesas-next-20130327. If you quote that as your base I should be able to apply your series without a hitch. > I'll post a separate patch series for the reference code if you don't > mind, as this might take a few days to be done. Sure, no problem. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 27, 2013 at 11:04:56PM +0900, Simon Horman wrote: > On Wed, Mar 27, 2013 at 02:50:05PM +0100, Bastian Hecht wrote: > > Hi Simon, > > > > 2013/3/27 Simon Horman <horms@verge.net.au>: > > > On Tue, Mar 26, 2013 at 12:18:18PM +0100, Bastian Hecht wrote: > > >> On some hardware we don't have a 1-1 mapping from the external > > >> interrupts coming from INTC to the GIC SPI pins. We can however > > >> share lines to demux incoming IRQs on these SoCs. > > >> > > >> This patch enables the intc_irqpin driver to detect requests for shared > > >> interrupt lines and demuxes them properly by querying the INTC INTREQx0A > > >> registers. > > >> > > >> If you need multiple shared intc_irqpin device instances, be sure to mask > > >> out all interrupts on the INTC that share the one line before you start > > >> to register them. Else you run into IRQ floods that would be caused by > > >> interrupts for which no handler has been set up yet when the first > > >> intc_irqpin device is registered. > > >> > > >> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> > > >> Acked-by: Magnus Damm <damm@opensource.se> > > > > > > Thanks, I will see about queuing up these changes for v3.10. > > > > > > > > > I believe that with these changes it should be possible to rebase/rework > > > armadillo800eva-reference so that it no longer uses the unmerged INTC > > > DT bindings. Would it be possible for you to see about making a fresh > > > version of armadillo800eva-reference that is based on the next branch > > > in the Renesas tree plus this series of two patches? > > > > yes ok, I'll prepare a new armadillo reference version. The patches > > were based on all+next, but I'll post a v4 rebased on next. > > Thanks, sorry for the bother. > > I have just pushed a fresh next branch and taged it as > renesas-next-20130327. If you quote that as your base I should > be able to apply your series without a hitch. Sorry, I missed that you had already posted v4. Thanks! > > I'll post a separate patch series for the reference code if you don't > > mind, as this might take a few days to be done. > > Sure, no problem. > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 27, 2013 at 02:50:05PM +0100, Bastian Hecht wrote: > Hi Simon, > > 2013/3/27 Simon Horman <horms@verge.net.au>: > > On Tue, Mar 26, 2013 at 12:18:18PM +0100, Bastian Hecht wrote: > >> On some hardware we don't have a 1-1 mapping from the external > >> interrupts coming from INTC to the GIC SPI pins. We can however > >> share lines to demux incoming IRQs on these SoCs. > >> > >> This patch enables the intc_irqpin driver to detect requests for shared > >> interrupt lines and demuxes them properly by querying the INTC INTREQx0A > >> registers. > >> > >> If you need multiple shared intc_irqpin device instances, be sure to mask > >> out all interrupts on the INTC that share the one line before you start > >> to register them. Else you run into IRQ floods that would be caused by > >> interrupts for which no handler has been set up yet when the first > >> intc_irqpin device is registered. > >> > >> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> > >> Acked-by: Magnus Damm <damm@opensource.se> > > > > Thanks, I will see about queuing up these changes for v3.10. > > > > > > I believe that with these changes it should be possible to rebase/rework > > armadillo800eva-reference so that it no longer uses the unmerged INTC > > DT bindings. Would it be possible for you to see about making a fresh > > version of armadillo800eva-reference that is based on the next branch > > in the Renesas tree plus this series of two patches? > > yes ok, I'll prepare a new armadillo reference version. The patches > were based on all+next, but I'll post a v4 rebased on next. > I'll post a separate patch series for the reference code if you don't > mind, as this might take a few days to be done. Hi Bastian, gentle nudge with regards to a fresh armadillo-reference. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Simon, ok I've sent out a patch series with the reference DT code. I've had to adapt a couple of things and the device list is rather short. How long do I have to augment it a bit before the merge window closes? Thanks, Bastian 2013/4/3 Simon Horman <horms@verge.net.au>: > On Wed, Mar 27, 2013 at 02:50:05PM +0100, Bastian Hecht wrote: >> Hi Simon, >> >> 2013/3/27 Simon Horman <horms@verge.net.au>: >> > On Tue, Mar 26, 2013 at 12:18:18PM +0100, Bastian Hecht wrote: >> >> On some hardware we don't have a 1-1 mapping from the external >> >> interrupts coming from INTC to the GIC SPI pins. We can however >> >> share lines to demux incoming IRQs on these SoCs. >> >> >> >> This patch enables the intc_irqpin driver to detect requests for shared >> >> interrupt lines and demuxes them properly by querying the INTC INTREQx0A >> >> registers. >> >> >> >> If you need multiple shared intc_irqpin device instances, be sure to mask >> >> out all interrupts on the INTC that share the one line before you start >> >> to register them. Else you run into IRQ floods that would be caused by >> >> interrupts for which no handler has been set up yet when the first >> >> intc_irqpin device is registered. >> >> >> >> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> >> >> Acked-by: Magnus Damm <damm@opensource.se> >> > >> > Thanks, I will see about queuing up these changes for v3.10. >> > >> > >> > I believe that with these changes it should be possible to rebase/rework >> > armadillo800eva-reference so that it no longer uses the unmerged INTC >> > DT bindings. Would it be possible for you to see about making a fresh >> > version of armadillo800eva-reference that is based on the next branch >> > in the Renesas tree plus this series of two patches? >> >> yes ok, I'll prepare a new armadillo reference version. The patches >> were based on all+next, but I'll post a v4 rebased on next. >> I'll post a separate patch series for the reference code if you don't >> mind, as this might take a few days to be done. > > Hi Bastian, > > gentle nudge with regards to a fresh armadillo-reference. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 04, 2013 at 03:47:34PM +0200, Bastian Hecht wrote: > Hi Simon, > > ok I've sent out a patch series with the reference DT code. I've had > to adapt a couple of things and the device list is rather short. How > long do I have to augment it a bit before the merge window closes? The merge window is more or less closed. So I think we will have to aim for v3.11. But I don't think that should affect the way you write the code, please just base it on the latest renesas-next tag. > Thanks, > > Bastian > > > 2013/4/3 Simon Horman <horms@verge.net.au>: > > On Wed, Mar 27, 2013 at 02:50:05PM +0100, Bastian Hecht wrote: > >> Hi Simon, > >> > >> 2013/3/27 Simon Horman <horms@verge.net.au>: > >> > On Tue, Mar 26, 2013 at 12:18:18PM +0100, Bastian Hecht wrote: > >> >> On some hardware we don't have a 1-1 mapping from the external > >> >> interrupts coming from INTC to the GIC SPI pins. We can however > >> >> share lines to demux incoming IRQs on these SoCs. > >> >> > >> >> This patch enables the intc_irqpin driver to detect requests for shared > >> >> interrupt lines and demuxes them properly by querying the INTC INTREQx0A > >> >> registers. > >> >> > >> >> If you need multiple shared intc_irqpin device instances, be sure to mask > >> >> out all interrupts on the INTC that share the one line before you start > >> >> to register them. Else you run into IRQ floods that would be caused by > >> >> interrupts for which no handler has been set up yet when the first > >> >> intc_irqpin device is registered. > >> >> > >> >> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> > >> >> Acked-by: Magnus Damm <damm@opensource.se> > >> > > >> > Thanks, I will see about queuing up these changes for v3.10. > >> > > >> > > >> > I believe that with these changes it should be possible to rebase/rework > >> > armadillo800eva-reference so that it no longer uses the unmerged INTC > >> > DT bindings. Would it be possible for you to see about making a fresh > >> > version of armadillo800eva-reference that is based on the next branch > >> > in the Renesas tree plus this series of two patches? > >> > >> yes ok, I'll prepare a new armadillo reference version. The patches > >> were based on all+next, but I'll post a v4 rebased on next. > >> I'll post a separate patch series for the reference code if you don't > >> mind, as this might take a few days to be done. > > > > Hi Bastian, > > > > gentle nudge with regards to a fresh armadillo-reference. > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2013/4/5 Simon Horman <horms@verge.net.au>: > On Thu, Apr 04, 2013 at 03:47:34PM +0200, Bastian Hecht wrote: >> Hi Simon, >> >> ok I've sent out a patch series with the reference DT code. I've had >> to adapt a couple of things and the device list is rather short. How >> long do I have to augment it a bit before the merge window closes? > > The merge window is more or less closed. So I think we will have > to aim for v3.11. But I don't think that should affect the way > you write the code, please just base it on the latest renesas-next tag. Ok thanks for the info, Simon. >> Thanks, >> >> Bastian >> >> >> 2013/4/3 Simon Horman <horms@verge.net.au>: >> > On Wed, Mar 27, 2013 at 02:50:05PM +0100, Bastian Hecht wrote: >> >> Hi Simon, >> >> >> >> 2013/3/27 Simon Horman <horms@verge.net.au>: >> >> > On Tue, Mar 26, 2013 at 12:18:18PM +0100, Bastian Hecht wrote: >> >> >> On some hardware we don't have a 1-1 mapping from the external >> >> >> interrupts coming from INTC to the GIC SPI pins. We can however >> >> >> share lines to demux incoming IRQs on these SoCs. >> >> >> >> >> >> This patch enables the intc_irqpin driver to detect requests for shared >> >> >> interrupt lines and demuxes them properly by querying the INTC INTREQx0A >> >> >> registers. >> >> >> >> >> >> If you need multiple shared intc_irqpin device instances, be sure to mask >> >> >> out all interrupts on the INTC that share the one line before you start >> >> >> to register them. Else you run into IRQ floods that would be caused by >> >> >> interrupts for which no handler has been set up yet when the first >> >> >> intc_irqpin device is registered. >> >> >> >> >> >> Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> >> >> >> Acked-by: Magnus Damm <damm@opensource.se> >> >> > >> >> > Thanks, I will see about queuing up these changes for v3.10. >> >> > >> >> > >> >> > I believe that with these changes it should be possible to rebase/rework >> >> > armadillo800eva-reference so that it no longer uses the unmerged INTC >> >> > DT bindings. Would it be possible for you to see about making a fresh >> >> > version of armadillo800eva-reference that is based on the next branch >> >> > in the Renesas tree plus this series of two patches? >> >> >> >> yes ok, I'll prepare a new armadillo reference version. The patches >> >> were based on all+next, but I'll post a v4 rebased on next. >> >> I'll post a separate patch series for the reference code if you don't >> >> mind, as this might take a few days to be done. >> > >> > Hi Bastian, >> > >> > gentle nudge with regards to a fresh armadillo-reference. >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-sh" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c index fd5dabc..5a68e5a 100644 --- a/drivers/irqchip/irq-renesas-intc-irqpin.c +++ b/drivers/irqchip/irq-renesas-intc-irqpin.c @@ -74,6 +74,8 @@ struct intc_irqpin_priv { struct platform_device *pdev; struct irq_chip irq_chip; struct irq_domain *irq_domain; + bool shared_irqs; + u8 shared_irq_mask; }; static unsigned long intc_irqpin_read32(void __iomem *iomem) @@ -193,6 +195,28 @@ static void intc_irqpin_irq_disable(struct irq_data *d) intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq); } +static void intc_irqpin_shared_irq_enable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "shared enable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_CLEAR, hw_irq); + + p->shared_irq_mask &= ~BIT(hw_irq); +} + +static void intc_irqpin_shared_irq_disable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "shared disable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq); + + p->shared_irq_mask |= BIT(hw_irq); +} + static void intc_irqpin_irq_enable_force(struct irq_data *d) { struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); @@ -261,6 +285,25 @@ static irqreturn_t intc_irqpin_irq_handler(int irq, void *dev_id) return IRQ_NONE; } +static irqreturn_t intc_irqpin_shared_irq_handler(int irq, void *dev_id) +{ + struct intc_irqpin_priv *p = dev_id; + unsigned int reg_source = intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE); + irqreturn_t status = IRQ_NONE; + int k; + + for (k = 0; k < 8; k++) { + if (reg_source & BIT(7 - k)) { + if (BIT(k) & p->shared_irq_mask) + continue; + + status |= intc_irqpin_irq_handler(irq, &p->irq[k]); + } + } + + return status; +} + static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { @@ -292,6 +335,7 @@ static int intc_irqpin_probe(struct platform_device *pdev) void (*enable_fn)(struct irq_data *d); void (*disable_fn)(struct irq_data *d); const char *name = dev_name(&pdev->dev); + int ref_irq; int ret; int k; @@ -372,13 +416,29 @@ static int intc_irqpin_probe(struct platform_device *pdev) for (k = 0; k < p->number_of_irqs; k++) intc_irqpin_mask_unmask_prio(p, k, 1); + /* clear all pending interrupts */ + intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, 0x0); + + /* scan for shared interrupt lines */ + ref_irq = p->irq[0].requested_irq; + p->shared_irqs = true; + for (k = 1; k < p->number_of_irqs; k++) { + if (ref_irq != p->irq[k].requested_irq) { + p->shared_irqs = false; + break; + } + } + /* use more severe masking method if requested */ if (p->config.control_parent) { enable_fn = intc_irqpin_irq_enable_force; disable_fn = intc_irqpin_irq_disable_force; - } else { + } else if (!p->shared_irqs) { enable_fn = intc_irqpin_irq_enable; disable_fn = intc_irqpin_irq_disable; + } else { + enable_fn = intc_irqpin_shared_irq_enable; + disable_fn = intc_irqpin_shared_irq_disable; } irq_chip = &p->irq_chip; @@ -400,18 +460,34 @@ static int intc_irqpin_probe(struct platform_device *pdev) goto err0; } - /* request and set priority on interrupts one by one */ - for (k = 0; k < p->number_of_irqs; k++) { - if (devm_request_irq(&pdev->dev, p->irq[k].requested_irq, - intc_irqpin_irq_handler, - 0, name, &p->irq[k])) { + if (p->shared_irqs) { + /* request one shared interrupt */ + if (devm_request_irq(&pdev->dev, p->irq[0].requested_irq, + intc_irqpin_shared_irq_handler, + IRQF_SHARED, name, p)) { dev_err(&pdev->dev, "failed to request low IRQ\n"); ret = -ENOENT; goto err1; } - intc_irqpin_mask_unmask_prio(p, k, 0); + } else { + /* request interrupts one by one */ + for (k = 0; k < p->number_of_irqs; k++) { + if (devm_request_irq(&pdev->dev, + p->irq[k].requested_irq, + intc_irqpin_irq_handler, + 0, name, &p->irq[k])) { + dev_err(&pdev->dev, + "failed to request low IRQ\n"); + ret = -ENOENT; + goto err1; + } + } } + /* unmask all interrupts on prio level */ + for (k = 0; k < p->number_of_irqs; k++) + intc_irqpin_mask_unmask_prio(p, k, 0); + dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs); /* warn in case of mismatch if irq base is specified */