| Message ID | 1364421586-29857-3-git-send-email-nab@linux-iscsi.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Mar 27, 2013 at 09:59:45PM +0000, Nicholas A. Bellinger wrote: > From: Paolo Bonzini <pbonzini@redhat.com> > > The WWPN specified in configfs is passed to "-device vhost-scsi-pci". > The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not > available from the QEMU command-line. Instead, I hardcode it to zero. > > Changes in V4: > - Set event_idx=off by default (nab, thanks asias) Why? What's going on here? > - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to > re-enable in v3.10 (nab) Userspace needs to support detecting host features at runtime, based on dev->features. In particular this applies to event_idx, but also hotplug. See vhost_net_get_features. > - Update to latest qemu.git/master HEAD > > Changes in V3: > - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) > - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) > - Add hotplug feature bit > > Changes in V2: > - Add backend guest masking support (nab) > - Bump ABI_VERSION to 1 (nab) > - Set up set_guest_notifiers (asias) > - Set up vs->dev.vq_index (asias) > - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) > - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) > > Howto: > Use the latest seabios, at least commit b44a7be17b > git clone git://git.seabios.org/seabios.git > make > cp out/bios.bin /usr/share/qemu/bios.bin > qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off > ... > > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> > Signed-off-by: Asias He <asias@redhat.com> > Cc: Michael S. Tsirkin <mst@redhat.com> > Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> > --- > configure | 15 +++- > hw/Makefile.objs | 5 +- > hw/s390x/s390-virtio-bus.c | 35 +++++++ > hw/vhost-scsi.c | 241 ++++++++++++++++++++++++++++++++++++++++++++ > hw/vhost-scsi.h | 66 ++++++++++++ > hw/virtio-pci.c | 62 +++++++++++ > hw/virtio-scsi.h | 2 + > 7 files changed, 424 insertions(+), 2 deletions(-) > create mode 100644 hw/vhost-scsi.c > create mode 100644 hw/vhost-scsi.h > > diff --git a/configure b/configure > index f2af714..6b67e35 100755 > --- a/configure > +++ b/configure > @@ -169,6 +169,7 @@ libattr="" > xfs="" > > vhost_net="no" > +vhost_scsi="no" > kvm="no" > gprof="no" > debug_tcg="no" > @@ -532,6 +533,7 @@ Haiku) > usb="linux" > kvm="yes" > vhost_net="yes" > + vhost_scsi="yes" > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then > audio_possible_drivers="$audio_possible_drivers fmod" > fi > @@ -858,6 +860,10 @@ for opt do > ;; > --enable-vhost-net) vhost_net="yes" > ;; > + --disable-vhost-scsi) vhost_scsi="no" > + ;; > + --enable-vhost-scsi) vhost_scsi="yes" > + ;; > --disable-glx) glx="no" > ;; > --enable-glx) glx="yes" > @@ -3078,7 +3084,7 @@ fi > # __sync_fetch_and_and requires at least -march=i486. Many toolchains > # use i686 as default anyway, but for those that don't, an explicit > # specification is necessary > -if test "$vhost_net" = "yes" && test "$cpu" = "i386"; then > +if (test "$vhost_net" = "yes" -o "$vhost_scsi" = "yes") && test "$cpu" = "i386"; then > cat > $TMPC << EOF > static int sfaa(int *ptr) > { > @@ -3424,6 +3430,7 @@ echo "sigev_thread_id $sigev_thread_id" > echo "uuid support $uuid" > echo "libcap-ng support $cap_ng" > echo "vhost-net support $vhost_net" > +echo "vhost-scsi support $vhost_scsi" > echo "Trace backend $trace_backend" > echo "Trace output file $trace_file-<pid>" > echo "spice support $spice ($spice_protocol_version/$spice_server_version)" > @@ -3697,6 +3704,9 @@ fi > if test "$virtfs" = "yes" ; then > echo "CONFIG_VIRTFS=y" >> $config_host_mak > fi > +if test "$vhost_scsi" = "yes" ; then > + echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak > +fi > if test "$blobs" = "yes" ; then > echo "INSTALL_BLOBS=yes" >> $config_host_mak > fi > @@ -4175,6 +4185,9 @@ case "$target_arch2" in > if test "$vhost_net" = "yes" ; then > echo "CONFIG_VHOST_NET=y" >> $config_target_mak > fi > + if test "$vhost_scsi" = "yes" ; then > + echo "CONFIG_VHOST_SCSI=y" >> $config_target_mak > + fi > fi > esac > case "$target_arch2" in > diff --git a/hw/Makefile.objs b/hw/Makefile.objs > index d0b2ecb..0a38eb5 100644 > --- a/hw/Makefile.objs > +++ b/hw/Makefile.objs > @@ -205,8 +205,11 @@ common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o xenfb.o xen_disk.o xen_nic.o > obj-$(CONFIG_VIRTIO) += dataplane/ > obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o > obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o virtio-scsi.o > +ifeq ($(CONFIG_VIRTIO), y) > +obj-$(CONFIG_LINUX) += vhost-scsi.o > +endif > obj-$(CONFIG_SOFTMMU) += vhost_net.o > -obj-$(CONFIG_VHOST_NET) += vhost.o > +obj-$(CONFIG_LINUX) += vhost.o > obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/ > obj-$(CONFIG_VGA) += vga.o > > diff --git a/hw/s390x/s390-virtio-bus.c b/hw/s390x/s390-virtio-bus.c > index c5d5456..73d93fd 100644 > --- a/hw/s390x/s390-virtio-bus.c > +++ b/hw/s390x/s390-virtio-bus.c > @@ -28,6 +28,8 @@ > #include "hw/virtio-rng.h" > #include "hw/virtio-serial.h" > #include "hw/virtio-net.h" > +#include "hw/virtio-scsi.h" > +#include "hw/vhost-scsi.h" > #include "hw/sysbus.h" > #include "sysemu/kvm.h" > > @@ -214,6 +216,18 @@ static int s390_virtio_scsi_init(VirtIOS390Device *dev) > return s390_virtio_device_init(dev, vdev); > } > > +static int s390_vhost_scsi_init(VirtIOS390Device *dev) > +{ > + VirtIODevice *vdev; > + > + vdev = vhost_scsi_init((DeviceState *)dev, &dev->scsi); > + if (!vdev) { > + return -1; > + } > + > + return s390_virtio_device_init(dev, vdev); > +} > + > static int s390_virtio_rng_init(VirtIOS390Device *dev) > { > VirtIODevice *vdev; > @@ -537,6 +551,27 @@ static const TypeInfo virtio_s390_device_info = { > .abstract = true, > }; > > +static Property s390_vhost_scsi_properties[] = { > + DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOS390Device, host_features, scsi), > + DEFINE_PROP_END_OF_LIST(), > +}; > + > +static void s390_vhost_scsi_class_init(ObjectClass *klass, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(klass); > + VirtIOS390DeviceClass *k = VIRTIO_S390_DEVICE_CLASS(klass); > + > + k->init = s390_vhost_scsi_init; > + dc->props = s390_vhost_scsi_properties; > +} > + > +static const TypeInfo s390_vhost_scsi = { > + .name = "vhost-scsi-s390", > + .parent = TYPE_VIRTIO_S390_DEVICE, > + .instance_size = sizeof(VirtIOS390Device), > + .class_init = s390_vhost_scsi_class_init, > +}; > + > static Property s390_virtio_scsi_properties[] = { > DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOS390Device, host_features, scsi), > DEFINE_PROP_END_OF_LIST(), > diff --git a/hw/vhost-scsi.c b/hw/vhost-scsi.c > new file mode 100644 > index 0000000..70e42fc > --- /dev/null > +++ b/hw/vhost-scsi.c > @@ -0,0 +1,241 @@ > +/* > + * vhost_scsi host device > + * > + * Copyright IBM, Corp. 2011 > + * > + * Authors: > + * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> > + * > + * Changes for QEMU mainline + tcm_vhost kernel upstream: > + * Nicholas Bellinger <nab@risingtidesystems.com> > + * > + * This work is licensed under the terms of the GNU LGPL, version 2 or later. > + * See the COPYING.LIB file in the top-level directory. > + * > + */ > + > +#include <sys/ioctl.h> > +#include "config.h" > +#include "qemu/queue.h" > +#include "monitor/monitor.h" > +#include "migration/migration.h" > +#include "vhost-scsi.h" > +#include "vhost.h" > +#include "virtio-scsi.h" > + > +typedef struct VHostSCSI { > + VirtIOSCSICommon vs; > + > + Error *migration_blocker; > + > + struct vhost_dev dev; > +} VHostSCSI; > + > +static int vhost_scsi_set_endpoint(VirtIODevice *vdev) > +{ > + VHostSCSI *vs = (VHostSCSI *)vdev; > + struct vhost_scsi_target backend; > + int ret; > + > + memset(&backend, 0, sizeof(backend)); > + pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->vs.conf->wwpn); > + ret = ioctl(vs->dev.control, VHOST_SCSI_SET_ENDPOINT, &backend); > + if (ret < 0) { > + return -errno; > + } > + return 0; > +} > + > +static void vhost_scsi_clear_endpoint(VirtIODevice *vdev) > +{ > + VHostSCSI *vs = (VHostSCSI *)vdev; > + struct vhost_scsi_target backend; > + > + memset(&backend, 0, sizeof(backend)); > + pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->vs.conf->wwpn); > + ioctl(vs->dev.control, VHOST_SCSI_CLEAR_ENDPOINT, &backend); > +} > + > +static int vhost_scsi_start(VHostSCSI *vs, VirtIODevice *vdev) > +{ > + int ret, abi_version; > + > + if (!vdev->binding->set_guest_notifiers) { > + error_report("binding does not support guest notifiers"); > + return -ENOSYS; > + } > + > + ret = ioctl(vs->dev.control, VHOST_SCSI_GET_ABI_VERSION, &abi_version); > + if (ret < 0) { > + return -errno; > + } > + if (abi_version > VHOST_SCSI_ABI_VERSION) { > + error_report("vhost-scsi: The running tcm_vhost kernel abi_version:" > + " %d is greater than vhost_scsi userspace supports: %d, please" > + " upgrade your version of QEMU\n", abi_version, > + VHOST_SCSI_ABI_VERSION); > + return -ENOSYS; > + } > + > + ret = vhost_dev_enable_notifiers(&vs->dev, vdev); > + if (ret < 0) { > + return ret; > + } > + > + ret = vhost_dev_start(&vs->dev, vdev); > + if (ret < 0) { > + error_report("Error start vhost dev"); > + goto err_notifiers; > + } > + > + ret = vhost_scsi_set_endpoint(vdev); > + if (ret < 0) { > + error_report("Error set vhost-scsi endpoint"); > + goto err_vhost_stop; > + } > + > + ret = vdev->binding->set_guest_notifiers(vdev->binding_opaque, vs->dev.nvqs, true); > + if (ret < 0) { > + error_report("Error binding guest notifier"); > + goto err_endpoint; > + } > + return ret; > + > +err_endpoint: > + vhost_scsi_clear_endpoint(vdev); > +err_vhost_stop: > + vhost_dev_stop(&vs->dev, vdev); > +err_notifiers: > + vhost_dev_disable_notifiers(&vs->dev, vdev); > + return ret; > +} > + > +static void vhost_scsi_stop(VHostSCSI *vs, VirtIODevice *vdev) > +{ > + int ret = 0; > + > + if (!vdev->binding->set_guest_notifiers) { > + ret = vdev->binding->set_guest_notifiers(vdev->binding_opaque, > + vs->dev.nvqs, false); > + if (ret < 0) { > + error_report("vhost guest notifier cleanup failed: %d\n", ret); > + } > + } > + assert(ret >= 0); > + > + vhost_scsi_clear_endpoint(vdev); > + vhost_dev_stop(&vs->dev, vdev); > + vhost_dev_disable_notifiers(&vs->dev, vdev); > +} > + > +static void vhost_scsi_set_config(VirtIODevice *vdev, > + const uint8_t *config) > +{ > + VirtIOSCSIConfig *scsiconf = (VirtIOSCSIConfig *)config; > + VHostSCSI *vs = (VHostSCSI *)vdev; > + > + if ((uint32_t) ldl_raw(&scsiconf->sense_size) != vs->vs.sense_size || > + (uint32_t) ldl_raw(&scsiconf->cdb_size) != vs->vs.cdb_size) { > + error_report("vhost-scsi does not support changing the sense data and CDB sizes"); > + exit(1); > + } > +} > + > +static void vhost_scsi_set_status(VirtIODevice *vdev, uint8_t val) > +{ > + VHostSCSI *vs = (VHostSCSI *)vdev; > + bool start = (val & VIRTIO_CONFIG_S_DRIVER_OK); > + > + if (vs->dev.started == start) { > + return; > + } > + > + if (start) { > + int ret; > + > + ret = vhost_scsi_start(vs, vdev); > + if (ret < 0) { > + error_report("virtio-scsi: unable to start vhost: %s\n", > + strerror(-ret)); > + > + /* There is no userspace virtio-scsi fallback so exit */ > + exit(1); > + } > + } else { > + vhost_scsi_stop(vs, vdev); > + } > +} > + > +static void vhost_scsi_guest_notifier_mask(VirtIODevice *vdev, int idx, > + bool mask) > +{ > + VHostSCSI *vs = (VHostSCSI *)vdev; > + > + vhost_virtqueue_mask(&vs->dev, vdev, idx, mask); > +} > + > +static bool vhost_scsi_guest_notifier_pending(VirtIODevice *vdev, int idx) > +{ > + VHostSCSI *vs = (VHostSCSI *)vdev; > + > + return vhost_virtqueue_pending(&vs->dev, idx); > +} > + > +VirtIODevice *vhost_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf) > +{ > + VHostSCSI *vs; > + int vhostfd = -1; > + int ret; > + > + if (!proxyconf->wwpn) { > + error_report("vhost-scsi: missing wwpn\n"); > + return NULL; > + } > + > + if (proxyconf->vhostfd) { > + vhostfd = monitor_handle_fd_param(cur_mon, proxyconf->vhostfd); > + if (vhostfd == -1) { > + error_report("vhost-scsi: unable to parse vhostfd\n"); > + return NULL; > + } > + } > + > + vs = (VHostSCSI *)virtio_scsi_init_common(dev, proxyconf, > + sizeof(VHostSCSI)); > + > + vs->vs.vdev.set_config = vhost_scsi_set_config; > + vs->vs.vdev.set_status = vhost_scsi_set_status; > + vs->vs.vdev.guest_notifier_mask = vhost_scsi_guest_notifier_mask; > + vs->vs.vdev.guest_notifier_pending = vhost_scsi_guest_notifier_pending; > + > + vs->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->vs.conf->num_queues; > + vs->dev.vqs = g_new(struct vhost_virtqueue, vs->dev.nvqs); > + vs->dev.vq_index = 0; > + > + ret = vhost_dev_init(&vs->dev, vhostfd, "/dev/vhost-scsi", true); > + if (ret < 0) { > + error_report("vhost-scsi: vhost initialization failed: %s\n", > + strerror(-ret)); > + return NULL; > + } > + vs->dev.backend_features = 0; > + vs->dev.acked_features = 0; > + > + error_setg(&vs->migration_blocker, > + "vhost-scsi does not support migration"); > + migrate_add_blocker(vs->migration_blocker); > + > + return &vs->vs.vdev; > +} > + > +void vhost_scsi_exit(VirtIODevice *vdev) > +{ > + VHostSCSI *vs = (VHostSCSI *)vdev; > + migrate_del_blocker(vs->migration_blocker); > + error_free(vs->migration_blocker); > + > + /* This will stop vhost backend. */ > + vhost_scsi_set_status(vdev, 0); > + g_free(vs->dev.vqs); > + virtio_cleanup(vdev); > +} > diff --git a/hw/vhost-scsi.h b/hw/vhost-scsi.h > new file mode 100644 > index 0000000..b01f012 > --- /dev/null > +++ b/hw/vhost-scsi.h > @@ -0,0 +1,66 @@ > +/* > + * vhost_scsi host device > + * > + * Copyright IBM, Corp. 2011 > + * > + * Authors: > + * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> > + * > + * This work is licensed under the terms of the GNU LGPL, version 2 or later. > + * See the COPYING.LIB file in the top-level directory. > + * > + */ > + > +#ifndef VHOST_SCSI_H > +#define VHOST_SCSI_H > + > +#include "qemu-common.h" > +#include "qdev.h" > +#include "virtio-scsi.h" > + > +/* > + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. > + * > + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + > + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage > + * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. > + * All the targets under vhost_wwpn can be seen and used by guest. > + */ > + > +#define VHOST_SCSI_ABI_VERSION 1 > + > +/* TODO #include <linux/vhost.h> properly */ > +/* For VHOST_SCSI_SET_ENDPOINT/VHOST_SCSI_CLEAR_ENDPOINT ioctl */ > +struct vhost_scsi_target { > + int abi_version; > + char vhost_wwpn[224]; > + unsigned short vhost_tpgt; > + unsigned short reserved; > +}; > + > +enum vhost_scsi_vq_list { > + VHOST_SCSI_VQ_CONTROL = 0, > + VHOST_SCSI_VQ_EVENT = 1, > + VHOST_SCSI_VQ_NUM_FIXED = 2, > +}; > + > +#define VHOST_VIRTIO 0xAF > +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) > +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) > +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) > + > +#define DEFINE_VHOST_SCSI_PROPERTIES(_state, _features_field, _conf_field) \ > + DEFINE_PROP_BIT("indirect_desc", _state, _features_field, VIRTIO_RING_F_INDIRECT_DESC, true), \ > + DEFINE_PROP_BIT("event_idx", _state, _features_field, VIRTIO_RING_F_EVENT_IDX, false), \ Maybe this works around some bug? Needs a comment with motivation. Ideally we won't do this, use DEFINE_VIRTIO_COMMON_FEATURES so that adding properties to all devices will be easier in the future. > + DEFINE_PROP_STRING("vhostfd", _state, _conf_field.vhostfd), \ > + DEFINE_PROP_STRING("wwpn", _state, _conf_field.wwpn), \ > + DEFINE_PROP_UINT32("num_queues", _state, _conf_field.num_queues, 1), \ > + DEFINE_PROP_UINT32("max_sectors", _state, _conf_field.max_sectors, 0xFFFF), \ > + DEFINE_PROP_UINT32("cmd_per_lun", _state, _conf_field.cmd_per_lun, 128), \ > + DEFINE_PROP_BIT("hotplug", _state, _features_field, VIRTIO_SCSI_F_HOTPLUG, true) Seems unused? > + > +VirtIODevice *vhost_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf); > +void vhost_scsi_exit(VirtIODevice *vdev); > + > + > +#endif > diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c > index f3ece78..0d67b84 100644 > --- a/hw/virtio-pci.c > +++ b/hw/virtio-pci.c > @@ -22,6 +22,7 @@ > #include "hw/virtio-net.h" > #include "hw/virtio-serial.h" > #include "hw/virtio-scsi.h" > +#include "hw/vhost-scsi.h" > #include "hw/pci/pci.h" > #include "qemu/error-report.h" > #include "hw/pci/msi.h" > @@ -1247,6 +1248,64 @@ static const TypeInfo virtio_scsi_info = { > .class_init = virtio_scsi_class_init, > }; > > +#ifdef CONFIG_VHOST_SCSI > +static int vhost_scsi_init_pci(PCIDevice *pci_dev) > +{ > + VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); > + VirtIODevice *vdev; > + > + vdev = vhost_scsi_init(&pci_dev->qdev, &proxy->scsi); > + if (!vdev) { > + return -EINVAL; > + } > + > + vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED > + ? proxy->scsi.num_queues + 3 > + : proxy->nvectors; > + virtio_init_pci(proxy, vdev); > + > + /* make the actual value visible */ > + proxy->nvectors = vdev->nvectors; > + return 0; > +} > + > +static void vhost_scsi_exit_pci(PCIDevice *pci_dev) > +{ > + VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); > + > + vhost_scsi_exit(proxy->vdev); > + virtio_exit_pci(pci_dev); > +} > + > +static Property vhost_scsi_properties[] = { > + DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, DEV_NVECTORS_UNSPECIFIED), > + DEFINE_VHOST_SCSI_PROPERTIES(VirtIOPCIProxy, host_features, scsi), > + DEFINE_PROP_END_OF_LIST(), > +}; > + > +static void vhost_scsi_class_init(ObjectClass *klass, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(klass); > + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > + > + k->init = vhost_scsi_init_pci; > + k->exit = vhost_scsi_exit_pci; > + k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; > + k->device_id = PCI_DEVICE_ID_VIRTIO_SCSI; > + k->revision = 0x00; > + k->class_id = PCI_CLASS_STORAGE_SCSI; > + dc->reset = virtio_pci_reset; > + dc->props = vhost_scsi_properties; > +} > + > +static const TypeInfo vhost_scsi_info = { > + .name = "vhost-scsi-pci", > + .parent = TYPE_PCI_DEVICE, > + .instance_size = sizeof(VirtIOPCIProxy), > + .class_init = vhost_scsi_class_init, > +}; > +#endif > + > #ifdef CONFIG_VIRTFS > static int virtio_9p_init_pci(PCIDevice *pci_dev) > { > @@ -1495,6 +1554,9 @@ static void virtio_pci_register_types(void) > type_register_static(&virtio_serial_info); > type_register_static(&virtio_balloon_info); > type_register_static(&virtio_scsi_info); > +#ifdef CONFIG_VHOST_SCSI > + type_register_static(&vhost_scsi_info); > +#endif > type_register_static(&virtio_rng_info); > type_register_static(&virtio_pci_bus_info); > type_register_static(&virtio_pci_info); > diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h > index 2bcf606..356bf38 100644 > --- a/hw/virtio-scsi.h > +++ b/hw/virtio-scsi.h > @@ -142,6 +142,8 @@ struct VirtIOSCSIConf { > uint32_t num_queues; > uint32_t max_sectors; > uint32_t cmd_per_lun; > + char *vhostfd; > + char *wwpn; > }; > > typedef struct VirtIOSCSICommon { > -- > 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 2013-03-28 at 00:28 +0200, Michael S. Tsirkin wrote: > On Wed, Mar 27, 2013 at 09:59:45PM +0000, Nicholas A. Bellinger wrote: > > From: Paolo Bonzini <pbonzini@redhat.com> > > > > The WWPN specified in configfs is passed to "-device vhost-scsi-pci". > > The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not > > available from the QEMU command-line. Instead, I hardcode it to zero. > > > > Changes in V4: > > - Set event_idx=off by default (nab, thanks asias) > > Why? What's going on here? > Not disabling event_idx by default, or disabling from the command line ends up resulting in ->handle_kick() not getting called for subsequent commands.. I spent some time trying to track this down recently with no luck, and AFAICT it's always been required in order for vhost-scsi to function. > > - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to > > re-enable in v3.10 (nab) > > Userspace needs to support detecting host features > at runtime, based on dev->features. > In particular this applies to event_idx, but also hotplug. > See vhost_net_get_features. <nod>, will get this fixed up. > > > - Update to latest qemu.git/master HEAD > > > > Changes in V3: > > - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) > > - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) > > - Add hotplug feature bit > > > > Changes in V2: > > - Add backend guest masking support (nab) > > - Bump ABI_VERSION to 1 (nab) > > - Set up set_guest_notifiers (asias) > > - Set up vs->dev.vq_index (asias) > > - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) > > - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) > > > > Howto: > > Use the latest seabios, at least commit b44a7be17b > > git clone git://git.seabios.org/seabios.git > > make > > cp out/bios.bin /usr/share/qemu/bios.bin > > qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off > > ... > > > > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> > > Signed-off-by: Asias He <asias@redhat.com> > > Cc: Michael S. Tsirkin <mst@redhat.com> > > Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> > > --- > > configure | 15 +++- > > hw/Makefile.objs | 5 +- > > hw/s390x/s390-virtio-bus.c | 35 +++++++ > > hw/vhost-scsi.c | 241 ++++++++++++++++++++++++++++++++++++++++++++ > > hw/vhost-scsi.h | 66 ++++++++++++ > > hw/virtio-pci.c | 62 +++++++++++ > > hw/virtio-scsi.h | 2 + > > 7 files changed, 424 insertions(+), 2 deletions(-) > > create mode 100644 hw/vhost-scsi.c > > create mode 100644 hw/vhost-scsi.h > > <SNIP> > > diff --git a/hw/vhost-scsi.h b/hw/vhost-scsi.h > > new file mode 100644 > > index 0000000..b01f012 > > --- /dev/null > > +++ b/hw/vhost-scsi.h > > @@ -0,0 +1,66 @@ > > +/* > > + * vhost_scsi host device > > + * > > + * Copyright IBM, Corp. 2011 > > + * > > + * Authors: > > + * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> > > + * > > + * This work is licensed under the terms of the GNU LGPL, version 2 or later. > > + * See the COPYING.LIB file in the top-level directory. > > + * > > + */ > > + > > +#ifndef VHOST_SCSI_H > > +#define VHOST_SCSI_H > > + > > +#include "qemu-common.h" > > +#include "qdev.h" > > +#include "virtio-scsi.h" > > + > > +/* > > + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. > > + * > > + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + > > + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage > > + * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. > > + * All the targets under vhost_wwpn can be seen and used by guest. > > + */ > > + > > +#define VHOST_SCSI_ABI_VERSION 1 > > + > > +/* TODO #include <linux/vhost.h> properly */ > > +/* For VHOST_SCSI_SET_ENDPOINT/VHOST_SCSI_CLEAR_ENDPOINT ioctl */ > > +struct vhost_scsi_target { > > + int abi_version; > > + char vhost_wwpn[224]; > > + unsigned short vhost_tpgt; > > + unsigned short reserved; > > +}; > > + > > +enum vhost_scsi_vq_list { > > + VHOST_SCSI_VQ_CONTROL = 0, > > + VHOST_SCSI_VQ_EVENT = 1, > > + VHOST_SCSI_VQ_NUM_FIXED = 2, > > +}; > > + > > +#define VHOST_VIRTIO 0xAF > > +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) > > +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) > > +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) > > + > > +#define DEFINE_VHOST_SCSI_PROPERTIES(_state, _features_field, _conf_field) \ > > + DEFINE_PROP_BIT("indirect_desc", _state, _features_field, VIRTIO_RING_F_INDIRECT_DESC, true), \ > > + DEFINE_PROP_BIT("event_idx", _state, _features_field, VIRTIO_RING_F_EVENT_IDX, false), \ > > Maybe this works around some bug? > Needs a comment with motivation. > > Ideally we won't do this, use DEFINE_VIRTIO_COMMON_FEATURES > so that adding properties to all devices will be easier > in the future. AFAICT vhost-scsi has never worked without event_idx=off, so disabling it by default here made sense. ;) > > > + DEFINE_PROP_STRING("vhostfd", _state, _conf_field.vhostfd), \ > > + DEFINE_PROP_STRING("wwpn", _state, _conf_field.wwpn), \ > > + DEFINE_PROP_UINT32("num_queues", _state, _conf_field.num_queues, 1), \ > > + DEFINE_PROP_UINT32("max_sectors", _state, _conf_field.max_sectors, 0xFFFF), \ > > + DEFINE_PROP_UINT32("cmd_per_lun", _state, _conf_field.cmd_per_lun, 128), \ > > + DEFINE_PROP_BIT("hotplug", _state, _features_field, VIRTIO_SCSI_F_HOTPLUG, true) > > Seems unused? Looks like left-over debug code from Asias.. Dropping this now.. > > > + > > +VirtIODevice *vhost_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf); > > +void vhost_scsi_exit(VirtIODevice *vdev); > > + > > + > > +#endif > > diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c > > index f3ece78..0d67b84 100644 > > --- a/hw/virtio-pci.c > > +++ b/hw/virtio-pci.c > > @@ -22,6 +22,7 @@ > > #include "hw/virtio-net.h" > > #include "hw/virtio-serial.h" > > #include "hw/virtio-scsi.h" > > +#include "hw/vhost-scsi.h" > > #include "hw/pci/pci.h" > > #include "qemu/error-report.h" > > #include "hw/pci/msi.h" > > @@ -1247,6 +1248,64 @@ static const TypeInfo virtio_scsi_info = { > > .class_init = virtio_scsi_class_init, > > }; > > > > +#ifdef CONFIG_VHOST_SCSI > > +static int vhost_scsi_init_pci(PCIDevice *pci_dev) > > +{ > > + VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); > > + VirtIODevice *vdev; > > + > > + vdev = vhost_scsi_init(&pci_dev->qdev, &proxy->scsi); > > + if (!vdev) { > > + return -EINVAL; > > + } > > + > > + vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED > > + ? proxy->scsi.num_queues + 3 > > + : proxy->nvectors; > > + virtio_init_pci(proxy, vdev); > > + > > + /* make the actual value visible */ > > + proxy->nvectors = vdev->nvectors; > > + return 0; > > +} > > + > > +static void vhost_scsi_exit_pci(PCIDevice *pci_dev) > > +{ > > + VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); > > + > > + vhost_scsi_exit(proxy->vdev); > > + virtio_exit_pci(pci_dev); > > +} > > + > > +static Property vhost_scsi_properties[] = { > > + DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, DEV_NVECTORS_UNSPECIFIED), > > + DEFINE_VHOST_SCSI_PROPERTIES(VirtIOPCIProxy, host_features, scsi), > > + DEFINE_PROP_END_OF_LIST(), > > +}; > > + > > +static void vhost_scsi_class_init(ObjectClass *klass, void *data) > > +{ > > + DeviceClass *dc = DEVICE_CLASS(klass); > > + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > > + > > + k->init = vhost_scsi_init_pci; > > + k->exit = vhost_scsi_exit_pci; > > + k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; > > + k->device_id = PCI_DEVICE_ID_VIRTIO_SCSI; > > + k->revision = 0x00; > > + k->class_id = PCI_CLASS_STORAGE_SCSI; > > + dc->reset = virtio_pci_reset; > > + dc->props = vhost_scsi_properties; > > +} > > + > > +static const TypeInfo vhost_scsi_info = { > > + .name = "vhost-scsi-pci", > > + .parent = TYPE_PCI_DEVICE, > > + .instance_size = sizeof(VirtIOPCIProxy), > > + .class_init = vhost_scsi_class_init, > > +}; > > +#endif > > + > > #ifdef CONFIG_VIRTFS > > static int virtio_9p_init_pci(PCIDevice *pci_dev) > > { > > @@ -1495,6 +1554,9 @@ static void virtio_pci_register_types(void) > > type_register_static(&virtio_serial_info); > > type_register_static(&virtio_balloon_info); > > type_register_static(&virtio_scsi_info); > > +#ifdef CONFIG_VHOST_SCSI > > + type_register_static(&vhost_scsi_info); > > +#endif > > type_register_static(&virtio_rng_info); > > type_register_static(&virtio_pci_bus_info); > > type_register_static(&virtio_pci_info); > > diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h > > index 2bcf606..356bf38 100644 > > --- a/hw/virtio-scsi.h > > +++ b/hw/virtio-scsi.h > > @@ -142,6 +142,8 @@ struct VirtIOSCSIConf { > > uint32_t num_queues; > > uint32_t max_sectors; > > uint32_t cmd_per_lun; > > + char *vhostfd; > > + char *wwpn; > > }; > > > > typedef struct VirtIOSCSICommon { > > -- > > 1.7.2.5 > -- > To unsubscribe from this list: send the line "unsubscribe target-devel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 27, 2013 at 03:45:42PM -0700, Nicholas A. Bellinger wrote: > On Thu, 2013-03-28 at 00:28 +0200, Michael S. Tsirkin wrote: > > On Wed, Mar 27, 2013 at 09:59:45PM +0000, Nicholas A. Bellinger wrote: > > > From: Paolo Bonzini <pbonzini@redhat.com> > > > > > > The WWPN specified in configfs is passed to "-device vhost-scsi-pci". > > > The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not > > > available from the QEMU command-line. Instead, I hardcode it to zero. > > > > > > Changes in V4: > > > - Set event_idx=off by default (nab, thanks asias) > > > > Why? What's going on here? > > > > Not disabling event_idx by default, or disabling from the command line > ends up resulting in ->handle_kick() not getting called for subsequent > commands.. > > I spent some time trying to track this down recently with no luck, and > AFAICT it's always been required in order for vhost-scsi to function. Hmm this is a bug in kernel then. A better work-around is to disable EVENT_IDX in kernel. Let's do it for 3.9? Then when we fix it, things just work for userspace. > > > - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to > > > re-enable in v3.10 (nab) > > > > Userspace needs to support detecting host features > > at runtime, based on dev->features. > > In particular this applies to event_idx, but also hotplug. > > See vhost_net_get_features. > > <nod>, will get this fixed up. > > > > > > - Update to latest qemu.git/master HEAD > > > > > > Changes in V3: > > > - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) > > > - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) > > > - Add hotplug feature bit > > > > > > Changes in V2: > > > - Add backend guest masking support (nab) > > > - Bump ABI_VERSION to 1 (nab) > > > - Set up set_guest_notifiers (asias) > > > - Set up vs->dev.vq_index (asias) > > > - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) > > > - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) > > > > > > Howto: > > > Use the latest seabios, at least commit b44a7be17b > > > git clone git://git.seabios.org/seabios.git > > > make > > > cp out/bios.bin /usr/share/qemu/bios.bin > > > qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off > > > ... > > > > > > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> > > > Signed-off-by: Asias He <asias@redhat.com> > > > Cc: Michael S. Tsirkin <mst@redhat.com> > > > Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> > > > --- > > > configure | 15 +++- > > > hw/Makefile.objs | 5 +- > > > hw/s390x/s390-virtio-bus.c | 35 +++++++ > > > hw/vhost-scsi.c | 241 ++++++++++++++++++++++++++++++++++++++++++++ > > > hw/vhost-scsi.h | 66 ++++++++++++ > > > hw/virtio-pci.c | 62 +++++++++++ > > > hw/virtio-scsi.h | 2 + > > > 7 files changed, 424 insertions(+), 2 deletions(-) > > > create mode 100644 hw/vhost-scsi.c > > > create mode 100644 hw/vhost-scsi.h > > > > > <SNIP> > > > > diff --git a/hw/vhost-scsi.h b/hw/vhost-scsi.h > > > new file mode 100644 > > > index 0000000..b01f012 > > > --- /dev/null > > > +++ b/hw/vhost-scsi.h > > > @@ -0,0 +1,66 @@ > > > +/* > > > + * vhost_scsi host device > > > + * > > > + * Copyright IBM, Corp. 2011 > > > + * > > > + * Authors: > > > + * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> > > > + * > > > + * This work is licensed under the terms of the GNU LGPL, version 2 or later. > > > + * See the COPYING.LIB file in the top-level directory. > > > + * > > > + */ > > > + > > > +#ifndef VHOST_SCSI_H > > > +#define VHOST_SCSI_H > > > + > > > +#include "qemu-common.h" > > > +#include "qdev.h" > > > +#include "virtio-scsi.h" > > > + > > > +/* > > > + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. > > > + * > > > + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + > > > + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage > > > + * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. > > > + * All the targets under vhost_wwpn can be seen and used by guest. > > > + */ > > > + > > > +#define VHOST_SCSI_ABI_VERSION 1 > > > + > > > +/* TODO #include <linux/vhost.h> properly */ > > > +/* For VHOST_SCSI_SET_ENDPOINT/VHOST_SCSI_CLEAR_ENDPOINT ioctl */ > > > +struct vhost_scsi_target { > > > + int abi_version; > > > + char vhost_wwpn[224]; > > > + unsigned short vhost_tpgt; > > > + unsigned short reserved; > > > +}; > > > + > > > +enum vhost_scsi_vq_list { > > > + VHOST_SCSI_VQ_CONTROL = 0, > > > + VHOST_SCSI_VQ_EVENT = 1, > > > + VHOST_SCSI_VQ_NUM_FIXED = 2, > > > +}; > > > + > > > +#define VHOST_VIRTIO 0xAF > > > +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) > > > +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) > > > +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) > > > + > > > +#define DEFINE_VHOST_SCSI_PROPERTIES(_state, _features_field, _conf_field) \ > > > + DEFINE_PROP_BIT("indirect_desc", _state, _features_field, VIRTIO_RING_F_INDIRECT_DESC, true), \ > > > + DEFINE_PROP_BIT("event_idx", _state, _features_field, VIRTIO_RING_F_EVENT_IDX, false), \ > > > > Maybe this works around some bug? > > Needs a comment with motivation. > > > > Ideally we won't do this, use DEFINE_VIRTIO_COMMON_FEATURES > > so that adding properties to all devices will be easier > > in the future. > > AFAICT vhost-scsi has never worked without event_idx=off, so disabling > it by default here made sense. ;) > > > > > > + DEFINE_PROP_STRING("vhostfd", _state, _conf_field.vhostfd), \ > > > + DEFINE_PROP_STRING("wwpn", _state, _conf_field.wwpn), \ > > > + DEFINE_PROP_UINT32("num_queues", _state, _conf_field.num_queues, 1), \ > > > + DEFINE_PROP_UINT32("max_sectors", _state, _conf_field.max_sectors, 0xFFFF), \ > > > + DEFINE_PROP_UINT32("cmd_per_lun", _state, _conf_field.cmd_per_lun, 128), \ > > > + DEFINE_PROP_BIT("hotplug", _state, _features_field, VIRTIO_SCSI_F_HOTPLUG, true) > > > > Seems unused? > > Looks like left-over debug code from Asias.. > > Dropping this now.. > > > > > > + > > > +VirtIODevice *vhost_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf); > > > +void vhost_scsi_exit(VirtIODevice *vdev); > > > + > > > + > > > +#endif > > > diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c > > > index f3ece78..0d67b84 100644 > > > --- a/hw/virtio-pci.c > > > +++ b/hw/virtio-pci.c > > > @@ -22,6 +22,7 @@ > > > #include "hw/virtio-net.h" > > > #include "hw/virtio-serial.h" > > > #include "hw/virtio-scsi.h" > > > +#include "hw/vhost-scsi.h" > > > #include "hw/pci/pci.h" > > > #include "qemu/error-report.h" > > > #include "hw/pci/msi.h" > > > @@ -1247,6 +1248,64 @@ static const TypeInfo virtio_scsi_info = { > > > .class_init = virtio_scsi_class_init, > > > }; > > > > > > +#ifdef CONFIG_VHOST_SCSI > > > +static int vhost_scsi_init_pci(PCIDevice *pci_dev) > > > +{ > > > + VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); > > > + VirtIODevice *vdev; > > > + > > > + vdev = vhost_scsi_init(&pci_dev->qdev, &proxy->scsi); > > > + if (!vdev) { > > > + return -EINVAL; > > > + } > > > + > > > + vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED > > > + ? proxy->scsi.num_queues + 3 > > > + : proxy->nvectors; > > > + virtio_init_pci(proxy, vdev); > > > + > > > + /* make the actual value visible */ > > > + proxy->nvectors = vdev->nvectors; > > > + return 0; > > > +} > > > + > > > +static void vhost_scsi_exit_pci(PCIDevice *pci_dev) > > > +{ > > > + VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); > > > + > > > + vhost_scsi_exit(proxy->vdev); > > > + virtio_exit_pci(pci_dev); > > > +} > > > + > > > +static Property vhost_scsi_properties[] = { > > > + DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, DEV_NVECTORS_UNSPECIFIED), > > > + DEFINE_VHOST_SCSI_PROPERTIES(VirtIOPCIProxy, host_features, scsi), > > > + DEFINE_PROP_END_OF_LIST(), > > > +}; > > > + > > > +static void vhost_scsi_class_init(ObjectClass *klass, void *data) > > > +{ > > > + DeviceClass *dc = DEVICE_CLASS(klass); > > > + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > > > + > > > + k->init = vhost_scsi_init_pci; > > > + k->exit = vhost_scsi_exit_pci; > > > + k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; > > > + k->device_id = PCI_DEVICE_ID_VIRTIO_SCSI; > > > + k->revision = 0x00; > > > + k->class_id = PCI_CLASS_STORAGE_SCSI; > > > + dc->reset = virtio_pci_reset; > > > + dc->props = vhost_scsi_properties; > > > +} > > > + > > > +static const TypeInfo vhost_scsi_info = { > > > + .name = "vhost-scsi-pci", > > > + .parent = TYPE_PCI_DEVICE, > > > + .instance_size = sizeof(VirtIOPCIProxy), > > > + .class_init = vhost_scsi_class_init, > > > +}; > > > +#endif > > > + > > > #ifdef CONFIG_VIRTFS > > > static int virtio_9p_init_pci(PCIDevice *pci_dev) > > > { > > > @@ -1495,6 +1554,9 @@ static void virtio_pci_register_types(void) > > > type_register_static(&virtio_serial_info); > > > type_register_static(&virtio_balloon_info); > > > type_register_static(&virtio_scsi_info); > > > +#ifdef CONFIG_VHOST_SCSI > > > + type_register_static(&vhost_scsi_info); > > > +#endif > > > type_register_static(&virtio_rng_info); > > > type_register_static(&virtio_pci_bus_info); > > > type_register_static(&virtio_pci_info); > > > diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h > > > index 2bcf606..356bf38 100644 > > > --- a/hw/virtio-scsi.h > > > +++ b/hw/virtio-scsi.h > > > @@ -142,6 +142,8 @@ struct VirtIOSCSIConf { > > > uint32_t num_queues; > > > uint32_t max_sectors; > > > uint32_t cmd_per_lun; > > > + char *vhostfd; > > > + char *wwpn; > > > }; > > > > > > typedef struct VirtIOSCSICommon { > > > -- > > > 1.7.2.5 > > -- > > To unsubscribe from this list: send the line "unsubscribe target-devel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Mar 28, 2013 at 12:50:21AM +0200, Michael S. Tsirkin wrote: > On Wed, Mar 27, 2013 at 03:45:42PM -0700, Nicholas A. Bellinger wrote: > > On Thu, 2013-03-28 at 00:28 +0200, Michael S. Tsirkin wrote: > > > On Wed, Mar 27, 2013 at 09:59:45PM +0000, Nicholas A. Bellinger wrote: > > > > From: Paolo Bonzini <pbonzini@redhat.com> > > > > > > > > The WWPN specified in configfs is passed to "-device vhost-scsi-pci". > > > > The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not > > > > available from the QEMU command-line. Instead, I hardcode it to zero. > > > > > > > > Changes in V4: > > > > - Set event_idx=off by default (nab, thanks asias) > > > > > > Why? What's going on here? > > > > > > > Not disabling event_idx by default, or disabling from the command line > > ends up resulting in ->handle_kick() not getting called for subsequent > > commands.. > > > > I spent some time trying to track this down recently with no luck, and > > AFAICT it's always been required in order for vhost-scsi to function. > > Hmm this is a bug in kernel then. A better work-around is > to disable EVENT_IDX in kernel. Let's do it for 3.9? But before we do, can you check that SET_FEATURES is called with this bit set if you enable event_idx? If not that's your bug then ...
On Thu, 2013-03-28 at 00:53 +0200, Michael S. Tsirkin wrote: > On Thu, Mar 28, 2013 at 12:50:21AM +0200, Michael S. Tsirkin wrote: > > On Wed, Mar 27, 2013 at 03:45:42PM -0700, Nicholas A. Bellinger wrote: > > > On Thu, 2013-03-28 at 00:28 +0200, Michael S. Tsirkin wrote: > > > > On Wed, Mar 27, 2013 at 09:59:45PM +0000, Nicholas A. Bellinger wrote: > > > > > From: Paolo Bonzini <pbonzini@redhat.com> > > > > > > > > > > The WWPN specified in configfs is passed to "-device vhost-scsi-pci". > > > > > The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not > > > > > available from the QEMU command-line. Instead, I hardcode it to zero. > > > > > > > > > > Changes in V4: > > > > > - Set event_idx=off by default (nab, thanks asias) > > > > > > > > Why? What's going on here? > > > > > > > > > > Not disabling event_idx by default, or disabling from the command line > > > ends up resulting in ->handle_kick() not getting called for subsequent > > > commands.. > > > > > > I spent some time trying to track this down recently with no luck, and > > > AFAICT it's always been required in order for vhost-scsi to function. > > > > Hmm this is a bug in kernel then. A better work-around is > > to disable EVENT_IDX in kernel. Let's do it for 3.9? > > But before we do, can you check that SET_FEATURES is > called with this bit set if you enable event_idx? > If not that's your bug then ... > Ok, SET_FEATURES is currently not setting any bits at all based upon vhost_dev->features, so it looks like a vhost-scsi-pci bug.. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 27, 2013 at 04:24:22PM -0700, Nicholas A. Bellinger wrote: > On Thu, 2013-03-28 at 00:53 +0200, Michael S. Tsirkin wrote: > > On Thu, Mar 28, 2013 at 12:50:21AM +0200, Michael S. Tsirkin wrote: > > > On Wed, Mar 27, 2013 at 03:45:42PM -0700, Nicholas A. Bellinger wrote: > > > > On Thu, 2013-03-28 at 00:28 +0200, Michael S. Tsirkin wrote: > > > > > On Wed, Mar 27, 2013 at 09:59:45PM +0000, Nicholas A. Bellinger wrote: > > > > > > From: Paolo Bonzini <pbonzini@redhat.com> > > > > > > > > > > > > The WWPN specified in configfs is passed to "-device vhost-scsi-pci". > > > > > > The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not > > > > > > available from the QEMU command-line. Instead, I hardcode it to zero. > > > > > > > > > > > > Changes in V4: > > > > > > - Set event_idx=off by default (nab, thanks asias) > > > > > > > > > > Why? What's going on here? > > > > > > > > > > > > > Not disabling event_idx by default, or disabling from the command line > > > > ends up resulting in ->handle_kick() not getting called for subsequent > > > > commands.. > > > > > > > > I spent some time trying to track this down recently with no luck, and > > > > AFAICT it's always been required in order for vhost-scsi to function. > > > > > > Hmm this is a bug in kernel then. A better work-around is > > > to disable EVENT_IDX in kernel. Let's do it for 3.9? > > > > But before we do, can you check that SET_FEATURES is > > called with this bit set if you enable event_idx? > > If not that's your bug then ... > > > > Ok, SET_FEATURES is currently not setting any bits at all based upon > vhost_dev->features, so it looks like a vhost-scsi-pci bug.. > > If you call SET_FEATURES, does it start working even without disabling EVENT_IDX in kernel? -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 2013-03-28 at 08:19 +0200, Michael S. Tsirkin wrote: > On Wed, Mar 27, 2013 at 04:24:22PM -0700, Nicholas A. Bellinger wrote: > > On Thu, 2013-03-28 at 00:53 +0200, Michael S. Tsirkin wrote: > > > On Thu, Mar 28, 2013 at 12:50:21AM +0200, Michael S. Tsirkin wrote: > > > > On Wed, Mar 27, 2013 at 03:45:42PM -0700, Nicholas A. Bellinger wrote: > > > > > On Thu, 2013-03-28 at 00:28 +0200, Michael S. Tsirkin wrote: > > > > > > On Wed, Mar 27, 2013 at 09:59:45PM +0000, Nicholas A. Bellinger wrote: > > > > > > > From: Paolo Bonzini <pbonzini@redhat.com> > > > > > > > > > > > > > > The WWPN specified in configfs is passed to "-device vhost-scsi-pci". > > > > > > > The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not > > > > > > > available from the QEMU command-line. Instead, I hardcode it to zero. > > > > > > > > > > > > > > Changes in V4: > > > > > > > - Set event_idx=off by default (nab, thanks asias) > > > > > > > > > > > > Why? What's going on here? > > > > > > > > > > > > > > > > Not disabling event_idx by default, or disabling from the command line > > > > > ends up resulting in ->handle_kick() not getting called for subsequent > > > > > commands.. > > > > > > > > > > I spent some time trying to track this down recently with no luck, and > > > > > AFAICT it's always been required in order for vhost-scsi to function. > > > > > > > > Hmm this is a bug in kernel then. A better work-around is > > > > to disable EVENT_IDX in kernel. Let's do it for 3.9? > > > > > > But before we do, can you check that SET_FEATURES is > > > called with this bit set if you enable event_idx? > > > If not that's your bug then ... > > > > > > > Ok, SET_FEATURES is currently not setting any bits at all based upon > > vhost_dev->features, so it looks like a vhost-scsi-pci bug.. > > > > > > If you call SET_FEATURES, does it start working even without > disabling EVENT_IDX in kernel? > Unfortunately, no. The same strangeness persists unless event_idx=off is passed, or EVENT_IDX is disabled in the kernel and stripped off with the vhost_scsi_get_features() patch. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 27, 2013 at 11:28:56PM -0700, Nicholas A. Bellinger wrote: > On Thu, 2013-03-28 at 08:19 +0200, Michael S. Tsirkin wrote: > > On Wed, Mar 27, 2013 at 04:24:22PM -0700, Nicholas A. Bellinger wrote: > > > On Thu, 2013-03-28 at 00:53 +0200, Michael S. Tsirkin wrote: > > > > On Thu, Mar 28, 2013 at 12:50:21AM +0200, Michael S. Tsirkin wrote: > > > > > On Wed, Mar 27, 2013 at 03:45:42PM -0700, Nicholas A. Bellinger wrote: > > > > > > On Thu, 2013-03-28 at 00:28 +0200, Michael S. Tsirkin wrote: > > > > > > > On Wed, Mar 27, 2013 at 09:59:45PM +0000, Nicholas A. Bellinger wrote: > > > > > > > > From: Paolo Bonzini <pbonzini@redhat.com> > > > > > > > > > > > > > > > > The WWPN specified in configfs is passed to "-device vhost-scsi-pci". > > > > > > > > The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not > > > > > > > > available from the QEMU command-line. Instead, I hardcode it to zero. > > > > > > > > > > > > > > > > Changes in V4: > > > > > > > > - Set event_idx=off by default (nab, thanks asias) > > > > > > > > > > > > > > Why? What's going on here? > > > > > > > > > > > > > > > > > > > Not disabling event_idx by default, or disabling from the command line > > > > > > ends up resulting in ->handle_kick() not getting called for subsequent > > > > > > commands.. > > > > > > > > > > > > I spent some time trying to track this down recently with no luck, and > > > > > > AFAICT it's always been required in order for vhost-scsi to function. > > > > > > > > > > Hmm this is a bug in kernel then. A better work-around is > > > > > to disable EVENT_IDX in kernel. Let's do it for 3.9? > > > > > > > > But before we do, can you check that SET_FEATURES is > > > > called with this bit set if you enable event_idx? > > > > If not that's your bug then ... > > > > > > > > > > Ok, SET_FEATURES is currently not setting any bits at all based upon > > > vhost_dev->features, so it looks like a vhost-scsi-pci bug.. > > > > > > > > > > If you call SET_FEATURES, does it start working even without > > disabling EVENT_IDX in kernel? > > > > Unfortunately, no. The same strangeness persists unless event_idx=off > is passed, or EVENT_IDX is disabled in the kernel and stripped off with > the vhost_scsi_get_features() patch. > I think it's important to fix it (usually exposes other bugs) but I agree, lets get it working without first. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/configure b/configure index f2af714..6b67e35 100755 --- a/configure +++ b/configure @@ -169,6 +169,7 @@ libattr="" xfs="" vhost_net="no" +vhost_scsi="no" kvm="no" gprof="no" debug_tcg="no" @@ -532,6 +533,7 @@ Haiku) usb="linux" kvm="yes" vhost_net="yes" + vhost_scsi="yes" if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then audio_possible_drivers="$audio_possible_drivers fmod" fi @@ -858,6 +860,10 @@ for opt do ;; --enable-vhost-net) vhost_net="yes" ;; + --disable-vhost-scsi) vhost_scsi="no" + ;; + --enable-vhost-scsi) vhost_scsi="yes" + ;; --disable-glx) glx="no" ;; --enable-glx) glx="yes" @@ -3078,7 +3084,7 @@ fi # __sync_fetch_and_and requires at least -march=i486. Many toolchains # use i686 as default anyway, but for those that don't, an explicit # specification is necessary -if test "$vhost_net" = "yes" && test "$cpu" = "i386"; then +if (test "$vhost_net" = "yes" -o "$vhost_scsi" = "yes") && test "$cpu" = "i386"; then cat > $TMPC << EOF static int sfaa(int *ptr) { @@ -3424,6 +3430,7 @@ echo "sigev_thread_id $sigev_thread_id" echo "uuid support $uuid" echo "libcap-ng support $cap_ng" echo "vhost-net support $vhost_net" +echo "vhost-scsi support $vhost_scsi" echo "Trace backend $trace_backend" echo "Trace output file $trace_file-<pid>" echo "spice support $spice ($spice_protocol_version/$spice_server_version)" @@ -3697,6 +3704,9 @@ fi if test "$virtfs" = "yes" ; then echo "CONFIG_VIRTFS=y" >> $config_host_mak fi +if test "$vhost_scsi" = "yes" ; then + echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak +fi if test "$blobs" = "yes" ; then echo "INSTALL_BLOBS=yes" >> $config_host_mak fi @@ -4175,6 +4185,9 @@ case "$target_arch2" in if test "$vhost_net" = "yes" ; then echo "CONFIG_VHOST_NET=y" >> $config_target_mak fi + if test "$vhost_scsi" = "yes" ; then + echo "CONFIG_VHOST_SCSI=y" >> $config_target_mak + fi fi esac case "$target_arch2" in diff --git a/hw/Makefile.objs b/hw/Makefile.objs index d0b2ecb..0a38eb5 100644 --- a/hw/Makefile.objs +++ b/hw/Makefile.objs @@ -205,8 +205,11 @@ common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o xenfb.o xen_disk.o xen_nic.o obj-$(CONFIG_VIRTIO) += dataplane/ obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o virtio-scsi.o +ifeq ($(CONFIG_VIRTIO), y) +obj-$(CONFIG_LINUX) += vhost-scsi.o +endif obj-$(CONFIG_SOFTMMU) += vhost_net.o -obj-$(CONFIG_VHOST_NET) += vhost.o +obj-$(CONFIG_LINUX) += vhost.o obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/ obj-$(CONFIG_VGA) += vga.o diff --git a/hw/s390x/s390-virtio-bus.c b/hw/s390x/s390-virtio-bus.c index c5d5456..73d93fd 100644 --- a/hw/s390x/s390-virtio-bus.c +++ b/hw/s390x/s390-virtio-bus.c @@ -28,6 +28,8 @@ #include "hw/virtio-rng.h" #include "hw/virtio-serial.h" #include "hw/virtio-net.h" +#include "hw/virtio-scsi.h" +#include "hw/vhost-scsi.h" #include "hw/sysbus.h" #include "sysemu/kvm.h" @@ -214,6 +216,18 @@ static int s390_virtio_scsi_init(VirtIOS390Device *dev) return s390_virtio_device_init(dev, vdev); } +static int s390_vhost_scsi_init(VirtIOS390Device *dev) +{ + VirtIODevice *vdev; + + vdev = vhost_scsi_init((DeviceState *)dev, &dev->scsi); + if (!vdev) { + return -1; + } + + return s390_virtio_device_init(dev, vdev); +} + static int s390_virtio_rng_init(VirtIOS390Device *dev) { VirtIODevice *vdev; @@ -537,6 +551,27 @@ static const TypeInfo virtio_s390_device_info = { .abstract = true, }; +static Property s390_vhost_scsi_properties[] = { + DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOS390Device, host_features, scsi), + DEFINE_PROP_END_OF_LIST(), +}; + +static void s390_vhost_scsi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + VirtIOS390DeviceClass *k = VIRTIO_S390_DEVICE_CLASS(klass); + + k->init = s390_vhost_scsi_init; + dc->props = s390_vhost_scsi_properties; +} + +static const TypeInfo s390_vhost_scsi = { + .name = "vhost-scsi-s390", + .parent = TYPE_VIRTIO_S390_DEVICE, + .instance_size = sizeof(VirtIOS390Device), + .class_init = s390_vhost_scsi_class_init, +}; + static Property s390_virtio_scsi_properties[] = { DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOS390Device, host_features, scsi), DEFINE_PROP_END_OF_LIST(), diff --git a/hw/vhost-scsi.c b/hw/vhost-scsi.c new file mode 100644 index 0000000..70e42fc --- /dev/null +++ b/hw/vhost-scsi.c @@ -0,0 +1,241 @@ +/* + * vhost_scsi host device + * + * Copyright IBM, Corp. 2011 + * + * Authors: + * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> + * + * Changes for QEMU mainline + tcm_vhost kernel upstream: + * Nicholas Bellinger <nab@risingtidesystems.com> + * + * This work is licensed under the terms of the GNU LGPL, version 2 or later. + * See the COPYING.LIB file in the top-level directory. + * + */ + +#include <sys/ioctl.h> +#include "config.h" +#include "qemu/queue.h" +#include "monitor/monitor.h" +#include "migration/migration.h" +#include "vhost-scsi.h" +#include "vhost.h" +#include "virtio-scsi.h" + +typedef struct VHostSCSI { + VirtIOSCSICommon vs; + + Error *migration_blocker; + + struct vhost_dev dev; +} VHostSCSI; + +static int vhost_scsi_set_endpoint(VirtIODevice *vdev) +{ + VHostSCSI *vs = (VHostSCSI *)vdev; + struct vhost_scsi_target backend; + int ret; + + memset(&backend, 0, sizeof(backend)); + pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->vs.conf->wwpn); + ret = ioctl(vs->dev.control, VHOST_SCSI_SET_ENDPOINT, &backend); + if (ret < 0) { + return -errno; + } + return 0; +} + +static void vhost_scsi_clear_endpoint(VirtIODevice *vdev) +{ + VHostSCSI *vs = (VHostSCSI *)vdev; + struct vhost_scsi_target backend; + + memset(&backend, 0, sizeof(backend)); + pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->vs.conf->wwpn); + ioctl(vs->dev.control, VHOST_SCSI_CLEAR_ENDPOINT, &backend); +} + +static int vhost_scsi_start(VHostSCSI *vs, VirtIODevice *vdev) +{ + int ret, abi_version; + + if (!vdev->binding->set_guest_notifiers) { + error_report("binding does not support guest notifiers"); + return -ENOSYS; + } + + ret = ioctl(vs->dev.control, VHOST_SCSI_GET_ABI_VERSION, &abi_version); + if (ret < 0) { + return -errno; + } + if (abi_version > VHOST_SCSI_ABI_VERSION) { + error_report("vhost-scsi: The running tcm_vhost kernel abi_version:" + " %d is greater than vhost_scsi userspace supports: %d, please" + " upgrade your version of QEMU\n", abi_version, + VHOST_SCSI_ABI_VERSION); + return -ENOSYS; + } + + ret = vhost_dev_enable_notifiers(&vs->dev, vdev); + if (ret < 0) { + return ret; + } + + ret = vhost_dev_start(&vs->dev, vdev); + if (ret < 0) { + error_report("Error start vhost dev"); + goto err_notifiers; + } + + ret = vhost_scsi_set_endpoint(vdev); + if (ret < 0) { + error_report("Error set vhost-scsi endpoint"); + goto err_vhost_stop; + } + + ret = vdev->binding->set_guest_notifiers(vdev->binding_opaque, vs->dev.nvqs, true); + if (ret < 0) { + error_report("Error binding guest notifier"); + goto err_endpoint; + } + return ret; + +err_endpoint: + vhost_scsi_clear_endpoint(vdev); +err_vhost_stop: + vhost_dev_stop(&vs->dev, vdev); +err_notifiers: + vhost_dev_disable_notifiers(&vs->dev, vdev); + return ret; +} + +static void vhost_scsi_stop(VHostSCSI *vs, VirtIODevice *vdev) +{ + int ret = 0; + + if (!vdev->binding->set_guest_notifiers) { + ret = vdev->binding->set_guest_notifiers(vdev->binding_opaque, + vs->dev.nvqs, false); + if (ret < 0) { + error_report("vhost guest notifier cleanup failed: %d\n", ret); + } + } + assert(ret >= 0); + + vhost_scsi_clear_endpoint(vdev); + vhost_dev_stop(&vs->dev, vdev); + vhost_dev_disable_notifiers(&vs->dev, vdev); +} + +static void vhost_scsi_set_config(VirtIODevice *vdev, + const uint8_t *config) +{ + VirtIOSCSIConfig *scsiconf = (VirtIOSCSIConfig *)config; + VHostSCSI *vs = (VHostSCSI *)vdev; + + if ((uint32_t) ldl_raw(&scsiconf->sense_size) != vs->vs.sense_size || + (uint32_t) ldl_raw(&scsiconf->cdb_size) != vs->vs.cdb_size) { + error_report("vhost-scsi does not support changing the sense data and CDB sizes"); + exit(1); + } +} + +static void vhost_scsi_set_status(VirtIODevice *vdev, uint8_t val) +{ + VHostSCSI *vs = (VHostSCSI *)vdev; + bool start = (val & VIRTIO_CONFIG_S_DRIVER_OK); + + if (vs->dev.started == start) { + return; + } + + if (start) { + int ret; + + ret = vhost_scsi_start(vs, vdev); + if (ret < 0) { + error_report("virtio-scsi: unable to start vhost: %s\n", + strerror(-ret)); + + /* There is no userspace virtio-scsi fallback so exit */ + exit(1); + } + } else { + vhost_scsi_stop(vs, vdev); + } +} + +static void vhost_scsi_guest_notifier_mask(VirtIODevice *vdev, int idx, + bool mask) +{ + VHostSCSI *vs = (VHostSCSI *)vdev; + + vhost_virtqueue_mask(&vs->dev, vdev, idx, mask); +} + +static bool vhost_scsi_guest_notifier_pending(VirtIODevice *vdev, int idx) +{ + VHostSCSI *vs = (VHostSCSI *)vdev; + + return vhost_virtqueue_pending(&vs->dev, idx); +} + +VirtIODevice *vhost_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf) +{ + VHostSCSI *vs; + int vhostfd = -1; + int ret; + + if (!proxyconf->wwpn) { + error_report("vhost-scsi: missing wwpn\n"); + return NULL; + } + + if (proxyconf->vhostfd) { + vhostfd = monitor_handle_fd_param(cur_mon, proxyconf->vhostfd); + if (vhostfd == -1) { + error_report("vhost-scsi: unable to parse vhostfd\n"); + return NULL; + } + } + + vs = (VHostSCSI *)virtio_scsi_init_common(dev, proxyconf, + sizeof(VHostSCSI)); + + vs->vs.vdev.set_config = vhost_scsi_set_config; + vs->vs.vdev.set_status = vhost_scsi_set_status; + vs->vs.vdev.guest_notifier_mask = vhost_scsi_guest_notifier_mask; + vs->vs.vdev.guest_notifier_pending = vhost_scsi_guest_notifier_pending; + + vs->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->vs.conf->num_queues; + vs->dev.vqs = g_new(struct vhost_virtqueue, vs->dev.nvqs); + vs->dev.vq_index = 0; + + ret = vhost_dev_init(&vs->dev, vhostfd, "/dev/vhost-scsi", true); + if (ret < 0) { + error_report("vhost-scsi: vhost initialization failed: %s\n", + strerror(-ret)); + return NULL; + } + vs->dev.backend_features = 0; + vs->dev.acked_features = 0; + + error_setg(&vs->migration_blocker, + "vhost-scsi does not support migration"); + migrate_add_blocker(vs->migration_blocker); + + return &vs->vs.vdev; +} + +void vhost_scsi_exit(VirtIODevice *vdev) +{ + VHostSCSI *vs = (VHostSCSI *)vdev; + migrate_del_blocker(vs->migration_blocker); + error_free(vs->migration_blocker); + + /* This will stop vhost backend. */ + vhost_scsi_set_status(vdev, 0); + g_free(vs->dev.vqs); + virtio_cleanup(vdev); +} diff --git a/hw/vhost-scsi.h b/hw/vhost-scsi.h new file mode 100644 index 0000000..b01f012 --- /dev/null +++ b/hw/vhost-scsi.h @@ -0,0 +1,66 @@ +/* + * vhost_scsi host device + * + * Copyright IBM, Corp. 2011 + * + * Authors: + * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> + * + * This work is licensed under the terms of the GNU LGPL, version 2 or later. + * See the COPYING.LIB file in the top-level directory. + * + */ + +#ifndef VHOST_SCSI_H +#define VHOST_SCSI_H + +#include "qemu-common.h" +#include "qdev.h" +#include "virtio-scsi.h" + +/* + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. + * + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage + * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. + * All the targets under vhost_wwpn can be seen and used by guest. + */ + +#define VHOST_SCSI_ABI_VERSION 1 + +/* TODO #include <linux/vhost.h> properly */ +/* For VHOST_SCSI_SET_ENDPOINT/VHOST_SCSI_CLEAR_ENDPOINT ioctl */ +struct vhost_scsi_target { + int abi_version; + char vhost_wwpn[224]; + unsigned short vhost_tpgt; + unsigned short reserved; +}; + +enum vhost_scsi_vq_list { + VHOST_SCSI_VQ_CONTROL = 0, + VHOST_SCSI_VQ_EVENT = 1, + VHOST_SCSI_VQ_NUM_FIXED = 2, +}; + +#define VHOST_VIRTIO 0xAF +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) + +#define DEFINE_VHOST_SCSI_PROPERTIES(_state, _features_field, _conf_field) \ + DEFINE_PROP_BIT("indirect_desc", _state, _features_field, VIRTIO_RING_F_INDIRECT_DESC, true), \ + DEFINE_PROP_BIT("event_idx", _state, _features_field, VIRTIO_RING_F_EVENT_IDX, false), \ + DEFINE_PROP_STRING("vhostfd", _state, _conf_field.vhostfd), \ + DEFINE_PROP_STRING("wwpn", _state, _conf_field.wwpn), \ + DEFINE_PROP_UINT32("num_queues", _state, _conf_field.num_queues, 1), \ + DEFINE_PROP_UINT32("max_sectors", _state, _conf_field.max_sectors, 0xFFFF), \ + DEFINE_PROP_UINT32("cmd_per_lun", _state, _conf_field.cmd_per_lun, 128), \ + DEFINE_PROP_BIT("hotplug", _state, _features_field, VIRTIO_SCSI_F_HOTPLUG, true) + +VirtIODevice *vhost_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf); +void vhost_scsi_exit(VirtIODevice *vdev); + + +#endif diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c index f3ece78..0d67b84 100644 --- a/hw/virtio-pci.c +++ b/hw/virtio-pci.c @@ -22,6 +22,7 @@ #include "hw/virtio-net.h" #include "hw/virtio-serial.h" #include "hw/virtio-scsi.h" +#include "hw/vhost-scsi.h" #include "hw/pci/pci.h" #include "qemu/error-report.h" #include "hw/pci/msi.h" @@ -1247,6 +1248,64 @@ static const TypeInfo virtio_scsi_info = { .class_init = virtio_scsi_class_init, }; +#ifdef CONFIG_VHOST_SCSI +static int vhost_scsi_init_pci(PCIDevice *pci_dev) +{ + VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); + VirtIODevice *vdev; + + vdev = vhost_scsi_init(&pci_dev->qdev, &proxy->scsi); + if (!vdev) { + return -EINVAL; + } + + vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED + ? proxy->scsi.num_queues + 3 + : proxy->nvectors; + virtio_init_pci(proxy, vdev); + + /* make the actual value visible */ + proxy->nvectors = vdev->nvectors; + return 0; +} + +static void vhost_scsi_exit_pci(PCIDevice *pci_dev) +{ + VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); + + vhost_scsi_exit(proxy->vdev); + virtio_exit_pci(pci_dev); +} + +static Property vhost_scsi_properties[] = { + DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, DEV_NVECTORS_UNSPECIFIED), + DEFINE_VHOST_SCSI_PROPERTIES(VirtIOPCIProxy, host_features, scsi), + DEFINE_PROP_END_OF_LIST(), +}; + +static void vhost_scsi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->init = vhost_scsi_init_pci; + k->exit = vhost_scsi_exit_pci; + k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; + k->device_id = PCI_DEVICE_ID_VIRTIO_SCSI; + k->revision = 0x00; + k->class_id = PCI_CLASS_STORAGE_SCSI; + dc->reset = virtio_pci_reset; + dc->props = vhost_scsi_properties; +} + +static const TypeInfo vhost_scsi_info = { + .name = "vhost-scsi-pci", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(VirtIOPCIProxy), + .class_init = vhost_scsi_class_init, +}; +#endif + #ifdef CONFIG_VIRTFS static int virtio_9p_init_pci(PCIDevice *pci_dev) { @@ -1495,6 +1554,9 @@ static void virtio_pci_register_types(void) type_register_static(&virtio_serial_info); type_register_static(&virtio_balloon_info); type_register_static(&virtio_scsi_info); +#ifdef CONFIG_VHOST_SCSI + type_register_static(&vhost_scsi_info); +#endif type_register_static(&virtio_rng_info); type_register_static(&virtio_pci_bus_info); type_register_static(&virtio_pci_info); diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h index 2bcf606..356bf38 100644 --- a/hw/virtio-scsi.h +++ b/hw/virtio-scsi.h @@ -142,6 +142,8 @@ struct VirtIOSCSIConf { uint32_t num_queues; uint32_t max_sectors; uint32_t cmd_per_lun; + char *vhostfd; + char *wwpn; }; typedef struct VirtIOSCSICommon {