new file mode 100644
@@ -0,0 +1,33 @@
+* Samsung PWM timers
+
+Samsung SoCs contain PWM timer blocks which can be used for system clock source
+and clock event timers.
+
+Be aware that this configuration is supported only on uniprocessor platforms.
+For SMP SoCs, SMP-aware timers should be used, like MCT.
+
+Required properties:
+- compatible : should be one of following:
+ samsung,s3c24xx-pwm - for 16-bit timers present on S3C24xx
+ samsung,s3c64xx-pwm - for 32-bit timers present on S3C64xx and newer
+- reg: base address and size of register area
+- interrupts: list of timer interrupts (one interrupt per timer, starting at
+ timer 0)
+
+Optional properties:
+- samsung,prescale-divisor: PWM prescaler divisor (from 1 to 256)
+- samsung,divisor: PWM main divider divisor (1, 2, 4, 8 or 16)
+- samsung,pwm-outputs: list of PWM channels reserved for use as PWM outputs
+ - an array of up to 5 elements being indices of PWM channels (from 0 to 4),
+ the order does not matter.
+
+Example:
+ timer@7f006000 {
+ compatible = "samsung,s3c64xx-pwm";
+ reg = <0x7f006000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>, <24>, <25>, <27>, <28>;
+ samsung,prescale-divisor = <2>;
+ samsung,divisor = <1>;
+ samsung,pwm-outputs = <0>, <1>;
+ };
@@ -14,6 +14,9 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <clocksource/samsung-time.h>
@@ -412,9 +415,12 @@ static void __init samsung_timer_resources(void)
unsigned long source_id = timer_source.source_id;
char devname[15];
- timer_base = ioremap_nocache(timer_variant.reg_base, SZ_4K);
- if (!timer_base)
- panic("failed to map timer registers");
+ if (!timer_base) {
+ /* Compatibility fallback for non-DT platforms */
+ timer_base = ioremap_nocache(timer_variant.reg_base, SZ_4K);
+ if (!timer_base)
+ panic("failed to map timer registers");
+ }
timerclk = clk_get(NULL, "timers");
if (IS_ERR(timerclk))
@@ -447,6 +453,11 @@ static void __init samsung_timer_resources(void)
clk_enable(tin_source);
}
+enum {
+ TYPE_S3C24XX,
+ TYPE_S3C64XX,
+};
+
void __init samsung_timer_init(void)
{
if (!timer_source.source_id && !timer_source.event_id)
@@ -459,3 +470,102 @@ void __init samsung_timer_init(void)
samsung_clockevent_init();
samsung_clocksource_init();
}
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_timer_ids[] = {
+ { .compatible = "samsung,s3c24xx-pwm", .data = (void *)TYPE_S3C24XX, },
+ { .compatible = "samsung,s3c64xx-pwm", .data = (void *)TYPE_S3C64XX, },
+ {},
+};
+
+static void __init samsung_of_timer_init(void)
+{
+ const struct of_device_id *match;
+ u8 channel_mask = (1 << 5) - 1;
+ struct device_node *np;
+ struct property *prop;
+ const __be32 *cur;
+ u32 val;
+ int i;
+
+ np = of_find_matching_node_and_match(NULL,
+ samsung_timer_ids, &match);
+ if (!np)
+ panic("timer node not found");
+
+ timer_base = of_iomap(np, 0);
+ if (!timer_base)
+ panic("failed to map timer registers");
+
+ for (i = 0; i < SAMSUNG_PWM_NUM; ++i)
+ timer_variant.irqs[i] = irq_of_parse_and_map(np, i);
+
+ if (!timer_variant.irqs[timer_source.event_id])
+ panic("no clock event irq provided");
+
+ switch ((unsigned int)match->data) {
+ case TYPE_S3C24XX:
+ timer_variant.bits = 16;
+ timer_variant.prescale = 25;
+ timer_variant.divisor = 2;
+ timer_variant.has_tint_cstat = false;
+ break;
+ case TYPE_S3C64XX:
+ timer_variant.bits = 32;
+ timer_variant.prescale = 2;
+ timer_variant.divisor = 1;
+ timer_variant.has_tint_cstat = true;
+ break;
+ }
+
+ of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
+ if (val >= SAMSUNG_PWM_NUM) {
+ pr_warning("%s: invalid channel index in samsung,pwm-outputs property\n",
+ __func__);
+ continue;
+ }
+ channel_mask &= ~(1 << val);
+ }
+
+ val = fls(channel_mask);
+ if (!val)
+ panic("failed to find PWM channel for clock source");
+ timer_source.source_id = val - 1;
+ channel_mask &= ~(1 << timer_source.source_id);
+
+ val = fls(channel_mask);
+ if (!val)
+ panic("failed to find PWM channel for clock events");
+ timer_source.event_id = val - 1;
+
+ if (!of_property_read_u32(np, "samsung,prescale-divisor", &val)) {
+ if (val < 1 || val > 256)
+ panic("samsung,prescale-divisor property out of range");
+ timer_variant.prescale = val;
+ }
+
+ if (!of_property_read_u32(np, "samsung,divisor", &val)) {
+ switch (val) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ case 16:
+ timer_variant.divisor = val;
+ break;
+ default:
+ panic("invalid value of samsung,divisor property");
+ }
+ }
+
+ pr_info("samsung-time: using PWM channels %d (source) and %d (event)\n",
+ timer_source.source_id, timer_source.event_id);
+
+ samsung_timer_init();
+}
+#endif /* CONFIG_OF */
+
+CLOCKSOURCE_OF_DECLARE(s3c24xx_timer,
+ "samsung,s3c24xx-pwm", samsung_of_timer_init)
+CLOCKSOURCE_OF_DECLARE(s3c64xx_timer,
+ "samsung,s3c64xx-pwm", samsung_of_timer_init)
This patch adds support for parsing all platform-specific data from Device Tree and instantiation using clocksource_of_init to samsung-time clocksource driver. Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> --- .../devicetree/bindings/timer/samsung-pwm.txt | 33 ++++++ drivers/clocksource/samsung-time.c | 116 ++++++++++++++++++++- 2 files changed, 146 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/timer/samsung-pwm.txt