| Message ID | 1364858969-17745-1-git-send-email-marex@denx.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Marek, On Tue, Apr 02, 2013 at 01:29:29AM +0200, Marek Vasut wrote: > Slow down the I2C clock speed on M28 and SPS1 as it turns out the > I2C block in i.MX28 can not operate stable enough with the bus > running at 400kHz. Note that the driver used by Freescale runs > the bus at 250kHz when 400kHz speed is selected, but the mainline > Linux kernel runs the bus at actual 400kHz and that's where it is > occasionally unstable. Play safe and run the bus at 100kHz. > > Signed-off-by: Marek Vasut <marex@denx.de> You consider it a fix for 3.9 or just material for 3.10? Shawn
Dear Shawn Guo, > Marek, > > On Tue, Apr 02, 2013 at 01:29:29AM +0200, Marek Vasut wrote: > > Slow down the I2C clock speed on M28 and SPS1 as it turns out the > > I2C block in i.MX28 can not operate stable enough with the bus > > running at 400kHz. Note that the driver used by Freescale runs > > the bus at 250kHz when 400kHz speed is selected, but the mainline > > Linux kernel runs the bus at actual 400kHz and that's where it is > > occasionally unstable. Play safe and run the bus at 100kHz. > > > > Signed-off-by: Marek Vasut <marex@denx.de> > > You consider it a fix for 3.9 or just material for 3.10? Fix for 3.9 please. Best regards, Marek Vasut
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 5f0ba99..5aa44e0 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -177,7 +177,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index e6cde8a..6c6a544 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -70,7 +70,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; rtc: rtc@51 {
Slow down the I2C clock speed on M28 and SPS1 as it turns out the I2C block in i.MX28 can not operate stable enough with the bus running at 400kHz. Note that the driver used by Freescale runs the bus at 250kHz when 400kHz speed is selected, but the mainline Linux kernel runs the bus at actual 400kHz and that's where it is occasionally unstable. Play safe and run the bus at 100kHz. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/boot/dts/imx28-m28evk.dts | 1 - arch/arm/boot/dts/imx28-sps1.dts | 1 - 2 files changed, 2 deletions(-)